ChryslerメーカーPacifica (2008)の使用説明書/サービス説明書
ページ先へ移動 of 454
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
.
INTRODUCTION CONTENTS m Introduction ........................... 4 m How T o Use This Manual .................. 4 m W arnings And Cautions ................... 6 m V ehicle Identification Number ............... 6 m V ehicle Modifications/Alterations ..
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedur es, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W or d About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 4 ▫ Locking Doors W ith The Key ..............
m Illuminated Entry System .................. 2 0 m Remote Keyless Entry ..................... 2 0 ▫ T o Unlock The Doors And Liftgate .......... 2 1 ▫ T o Lock The Doors And Liftgate ............ 2 2 ▫ T o Open/Close Power Liftgate — If Equipped .
▫ Seat Belt Extender ...................... 4 9 ▫ Driver And Front Passenger Supplemental Restraint System - Airbag ................ 5 0 ▫ Event Data Recorder (EDR) ............... 6 5 ▫ Child Restraint ........................ 6 7 m Engine Break-In Recommendations .
A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransaxle Place the shift lever in P ARK.
NOTE: If you try to r emove the key befor e you place the lever in P ARK, the key may become trapped temporarily in the ignition cylinder . If this occurs, rotate the key to the right slightly , then remove the key as described.
Key-In-Ignition Reminder A chime will sound (reminding you to remove the key) when the driver’s door opens and the key is in the ’OFF’ or ’ACC’ positions. The chime will not sound with the key in the ’ON’ position. Locking Doors With The Key Y ou can insert the key with either side up.
Automatic T ransaxle Ignition Interlock System This system prevents the key from being removed unless the shift lever is in P ARK. It also prevents shifting out of P ARK unless the key is in the ACC, or ON positions, and the brake pedal is depressed.
NOTE: • The Sentry Key Immobilizer System is not compatible with r emote starting systems. Use of these systems may result in vehicle starting pr oblems and loss of security protection.
NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to the dealer . Customer Key Programming Y ou can program new sentry keys to the system if you have two valid sentry keys by performing the following procedur e: 1.
General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interference that may cause undes- ired operation.
NOTE: If the SECURITY light stays on continuously during vehicle operation, have the system checked by your dealer . T o Disarm the System: Use the Keyless Entry transmitter to unlock the door .
ILLUMINA TED ENTR Y SYSTEM The courtesy lights will turn on when you use the keyless entry transmitter or open the doors. The lights will fade to of f after about 30 seconds or they will immediately fade to off once the ignition switch is turned on.
T o unlock the doors and liftgate: Press and r elease the UNLOCK button on the transmitter once to unlock the driver’s door , or twice to unlock all doors and liftgate. When the UNLOCK button is pr essed, the illuminated entry will initiate and the parking lights will flash on twice.
4. This will allow you to unlock all doors on the first press of the UNLOCK button. 5. T o reactivate the featur e, repeat this pr ocedure. 6. If the programming pr ocedure was unsuccessful see your authorized dealer for programming assistance. T o lock the doors and liftgate: Press and release the LOCK button on the transmitter to lock all doors.
T o Open/Close Power Liftgate — If Equipped Press the LIFTGA TE button twice within five seconds to open/close the power liftgate. The liftgate will beep for 2 seconds and then open/close. If the button is pushed while the liftgate is being power closed, the liftgate will reverse to the full open position.
Using The Panic Alarm: T o activate the Panic mode while the ignition is OFF press and release the P ANIC button on the transmitter once. When the Panic mode is activated, the interior lights will illuminate, the headlamps and parking lights will flash, and the horn will sound.
2. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o reassemble the transmitter case, snap the two halves together .
DOOR LOCKS Manual Door Locks Lock the doors by pushing up on the lock knob on each door trim panel. If the lock knob is up when you shut the door , the door will lock. Ther efore, make sure the keys ar e not inside the vehicle before closing the door .
Power Door Locks A power door lock switch is located on each front door trim panel. Use this switch to lock or unlock all doors and liftgate. If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate.
If desired, the “Auto Door Locks?” feature can be turned on or off by using the following procedure: • On electr onic vehicle information center (EVIC) equipped vehicles refer to “Auto Door Locks?” under “Use Factory Settings?” in the EVIC section of this manual.
This feature will not operate if there is any manual operation of the power door locks (Lock or Unlock). If desired, the “Auto Unlock On Exit?” feature can be turned on or off by using the followi.
Child Protection Door Lock T o provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a child protection door lock system. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
NOTE: For emergency exit with the system engaged, move the door lock knob to the UNLOCK position, roll down the window and open the door with the outside door handle. W ARNING! A void trapping anyone in the vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged.
WINDOWS Power Windows The window controls on the driver’s door control all the door windows. The switches will operate only when the ignition switch is in the ON or ACCESSORY position or during accessory delay . The window lock switch on the driver’s door allows you to disable the window controls on the passenger doors.
The time is customer programmable through the Elec- tronic V ehicle Information Center (EVIC). Refer to “Power Accessory Delay?” under “Personal Settings (Customer Programmable Featur es)” in Section 4 of this manual for details.
1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed. 2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.
The liftgate will not manually open if the vehicle is locked, in gear or if the vehicle speed is above 0 mph (0 km/h). NOTE: • In the event of a power malfunction to the liftgate, an emergency liftgate latch release can be used to open the liftgate.
The power liftgate may also be opened by pressing the button located on the overhead console. When the remote button is pressed the “Lamp Flash” feature is enabled the tail lights will flash to signal that the liftgate is opening or closing. A beeping signal will sound two seconds before the liftgate starts to open or close.
• There ar e also pinch sensors attached to the side of the liftgate. Light pr essure anywher e along these strips will cause the liftgate to return to the open position.
Gas pr ops support the liftgate in the open position. However , because the gas pressur e dr ops with tempera- ture, it may be necessary to assist the props when opening the liftgate in cold weather . OCCUP ANT RESTRAINTS Some of the most important safety featur es in your vehicle are the restraint systems.
NOTE: The front airbags have a multi stage inflator design. This allows the airbag to have differ ent rates of inflation that are based on collision severity . Please pay close attention to the information in this section. It tells you how to use your restraint system properly to keep you and your passengers as safe as possible.
normal conditions. But in a collision, the belt will lock and reduce the risk of your striking the inside of the vehicle or being thrown out. W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the rear seats. Grasp the latch plate and pull out the belt.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click”. W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
6. T o release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
As a guide, if you ar e shorter than average, you will prefer a lower position, and if you ar e taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate.
Seat Belt Pretensioners The seat belt assemblies for both front seating positions are equipped with pretensioning devices that are de- signed to remove slack from the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision.
NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or RUN position. DaimlerChrysler does not recommend deactivating the Enhanced W arning System (BeltAlert). 1. T urn the ignition switch to the OFF position, and buckle the driver’s seat belt.
Automatic-Locking Retractor (ALR) The center seating position on vehicles equipped with a second row bench seat is equipped with an Automatic- Locking Retractor (ALR). Pull the belt fr om the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle.
W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the lap belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed.
Also, the front passenger airbag is certified to the Federal regulations that define Occupant Restraint Controller (ORC) system. This vehicle may also be equipped with a driver inflat- able knee blocker located on the instrument panel below the steering column.
W ARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. Y ou may dam- age the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are de- signed to open only when the airbags are inflating.
Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should ride buckled up in the rear seat. 2. Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag.
W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
• Knee Impact Bolster • Front Seat Belt Pretensioners • Front Passenger Seat Occupant Classification System (OCS) — If OCS Equipped − Occupant Classification Module − Passenger Airbag Disa.
detects a malfunction in any part of the system, it turns on the AIRBAG warning light either momentarily or continuously . A single chime will sound if the light comes on again after initial start up. W ARNING! Ignoring the AIRBAG warning light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision.
inflate, it signals the inflators on the crash side of the vehicle. A quantity of nontoxic gas is generated to inflate the window bag. The inflating window bag pushes the outside edge of the headliner out of the way and covers the window .
another object in the vehicle (i.e. feet on the dash- board), the OCS may not be able to properly approxi- mate occupant size. Furthermor e, the occupant size may appear to increase or decrease due to objects hanging on the seat, other passengers pushing on the seat, or objects lodged underneath the seat.
For almost all sizes of properly seated adults, the airbag will be enabled in the event of a collision. For small teenagers and some small adults, depending on size, the airbag may or may not be enabled in the event of a collision.
front passenger airbag is allowed. If a fault is present, the AIRBAG warning light is illuminated. • The Passenger Airbag Disabled (P AD) Indicator Light — If Equipped indicates to the driver and passenger when the airbag is turned OFF in the presence of a pr operly seated occupant.
W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly , its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an acci- dent.
If A Deployment Occurs The airbag system is designed to deploy the airbags when the ORC and impact sensors detect a moderate-to- severe collision, to help restrain the vehicle passengers, and then immediately deflate. NOTE: A collision that is not severe enough to need airbag protection will not activate the system.
W ARNING! Deployed airbags, front seat belt pretensioners and driver inflatable knee blocker cannot protect you in another collision. Have the airbags, front seat belt pretensioners and driver inflatable knee blocker (if equipped) replaced by an authorized dealer as soon as possible.
Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you.
• The AIRBAG light does not come on or flickers during the 6 to 8 seconds when the ignition switch is first turned on. • The light remains on or flickers after the 6 to 8 second interval. • The light flickers or comes on and remains on while driving.
In the event that an investigation is undertaken by DaimlerChrysler Corporation (regardless of initiative), the company or its designated representative will first obtain permission of the appropriate.
• Airbag deployment level (if applicable) • Impact acceleration and angle • Seatbelt status • Brake status (service and parking brakes) • Accelerator status (including vehicle speed) • Eng.
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
Older Children and Child Restraints Children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forwar d-facing dir ection ar e for children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year .
W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
• In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle end of the belt several times to shorten it.
Six passenger vehicles ar e equipped with second r ow fold & tumble seats with lower anchorages that can accommodate rigid mount or flexible webbing-mounted LA TCH-compatible child seats. The third row seating positions are not equipped with lower anchorages.
also accommodate a flexible webbing-mounted LA TCH- compatible child seat by using the inboar d lower anchors of the two outboard seating positions. A rigid mount seat can only be installed at this seating location by using the vehicle’s seat belt.
convenient. When using the LA TCH System, always follow the child restraint manufacturer’s installation in- structions. NOTE: If your child restraint seat is not LA TCH com- patible, install the restraint using the vehicle seat belts.
When the tether anchorage is used in the third row seating position, the strap should be positioned straight over the top of the seatback. Installing A Child Restraint W e urge that you carefully follow the directions of the manufacturer when installing your child restraint.
strap. Forward-facing toddler restraints and some rearwar d-facing infant restraints will also be equipped with a tether strap, a hook and means for adjusting the tension in the strap.
Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle. Not all child restraint systems will be installed as we have described here. Again, car efully follow the instruc- tions that come with the child restraint system.
The engine oil installed in the engine at the factory is a high quality energy conserving type lubricant. Oil changes should be consistent with anticipated climate conditions under which vehicle operations will occur . The r ecommended viscosity and quality grades are shown in Section 7 of this manual.
W ARNING! If you are required to drive with the deck lid / liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode. Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays and loose parts.
Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tread wear or uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tr ead. Inspect tread and sidewall for cuts or cracks. Check wheel nuts for tightness, and tires (includ- ing spare) for proper pressur e.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors ............................... 8 6 ▫ Inside Day / Night Mirror ................ 8 6 ▫ Automatic Dimming Mirror — If Equipped .... 8 6 ▫ Driver’s Side Outside Mirror Auto Dimmer — If Equipped .
▫ Things Y ou Should Know About Y our UConnect™ System .................... 1 0 6 ▫ General Information ................... 1 1 4 m Seats ................................ 1 1 5 ▫ 10–W ay Driver’s Power Seat — If Equipped . . 1 15 ▫ 8–W ay Driver’s Power Seat — If Equipped .
m Lights ............................... 1 3 4 ▫ Overhead Console Map/Reading Lights ..... 1 3 4 ▫ Interior Lights ....................... 1 3 5 ▫ Multi-Function Lever ................... 1 3 6 ▫ Headlights, Parking Lights, Instrument Panel Lights .
▫ T o V ary The Speed Setting ............... 1 4 5 ▫ T o Accelerate For Passing ............... 1 4 6 m Garage Door Opener — If Equipped ......... 1 4 6 ▫ Programming HomeLink t ............... 1 4 7 ▫ Canadian Programming/Gate Programming .
▫ Courtesy/Reading Lights ................ 1 6 8 ▫ Sunglasses Storage .................... 1 6 8 m Power Sunroof — If Equipped ............. 1 6 9 ▫ Express Open Feature .................. 1 7 0 ▫ W ind Buffeting ....................... 1 7 1 ▫ Sunroof Comfort Position — If Equipped .
MIRRORS Inside Day / Night Mirror Adjust the mirror to center on the view through the rear window . A two point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Driver’s Side Outside Mirror Auto Dimmer — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you.
Outside Mirror — Passenger’s Side Adjust the convex outside mirror so you can just see the side of your vehicle in the portion of the mirror closest to the vehicle. This type of mirror will give a much wider view to the rear , and especially of the lane next to your vehicle.
Press the rocker switch to the L or R for Left or Right mirror selection. Use the center off position to guard against accidentally moving a mirror position. Select a mirror and press one of the four arrows for the direction you want the mirror to move.
UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micro- phone for private conversation. The UConnect™ phonebook enables you to store up to 32 names and four numbers per name.
enable you to access the system. Actual button location may vary with radio. The individual buttons are de- scribed in the “Operations” section. The UConnect™ system can be used with any Hands- Free Profile certified Bluetooth™ cellular phone.
example, you can use the combined form voice com- mand 9 Phonebook New Entry , 9 or you can break the combined form command into two voice commands: 9 Phonebook 9 and 9 New Entry . 9 Please remember , the UConnect™ system works best when you talk in a normal conversational tone, as if speaking to some one sitting eight feet away from you.
The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Setup Phone Pairing 9 and follow the audible pr ompts. • When prompted, after the voice on beep, say 9 Pair a Phone 9 and follow the audible prompts.
• System will pr ompt you to say the number you want call. • For example, you can say 9 234-567-8901. 9 The phone number that you enter must be of valid length and combination. Based on the country in which the ve- hicle was pur chased, the UConnect™ limits the user from dialing invalid combination of numbers.
• After the 9 Ready 9 prompt and the following beep, say 9 Phonebook New Entry . 9 • When pr ompted, say the name of the new entry . Use of long names helps the voice recognition and is recom- mended. For example, say 9 Robert Smith 9 or 9 Robert 9 instead of 9 Bob.
• When prompted, recite the new phone number for the phonebook entry that you are editing. After you are finished editing an entry in the phonebook, you will be given the opportunities to edit another entry in the phonebook, call the number you just edited, or return to the main menu.
After confirmation, the phonebook entries will be de- leted. Note that only the phonebook in the curr ent language is deleted. Delete All Entries in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook Erase All.
Phone Call Features The following features can be accessed thr ough the UConnect™ system if the feature(s) ar e available on your cellular service plan. For example, if your cellular service plan provides three-way calling, this featur e can be accessed thr ough the UConnect™ system.
second call is in pr ogress. T o go back to the first call, refer to 9 T oggling Between Calls. 9 T o combine two calls, refer to 9 Conference Call. 9 Place/Retrieve a Call from Hold T o put a call on hold, press the 8 Phone’ button until you hear a single beep.
Redial • Press the ’Phone’ button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Redial. 9 • The UConnect™ system will call the last number that was dialed on your cellular phone. NOTE: This may not be the last number dialed from the UConnect™ system.
• After the 9 Ready 9 prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language.
emergency situations when the cell phone has network coverage and stays paired to the UConnect™ system. T owing Assistance If you need towing assistance, • Press the ’Phone’ button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 T owing Assistance.
When calling a number with your UConnect™ system that normally r equires you to enter in a touch-tone sequence on your cellular phone keypad, you can push the ’V oice Recognition’ button and say the sequence you wish to enter followed by the word 9 Send.
Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measures).
Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred from your cellular phone to the UConnect™ system without terminating the call.
• Press the ’Phone’ button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Setup Select Phone 9 and follow the prompts. • Y ou can also press the 8 V oice Recognition’ button anytime while the list is being played, and then choose the phone that you wish to select.
• Press the ‘V oice Recognition’ button and say 9 Setup, V oice T raining 9 command. Repeat the words and phrases when prompted by the UConnect™ system. For best results, the V oice T raining session should be completed when the vehicle is parked, engine running, all windows closed, and the blower fan switched off.
• When navigating thr ough an automated system, such as voice mail, or when sending a page at the end of speaking the digit string, make sure to say 9 send. 9 • Storing names in phonebook when vehicle is not in motion is recommended. • It is not recommended to store similar sounding names in the UConnect™ phonebook.
Bluetooth Communication Link Occasionally , Cellular phones have been found to lose connection to the UConnect™ system. When this hap- pens, the connection can generally be r e-established by switching the phone off/on. Y our cell phone is recom- mended to remain in Bluetooth 9 on 9 mode.
1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 11 1 3.
1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
North American English Primary Alternate(s) Zero Oh One Tw o Three Four Five Six Seven Eight Nine Star (*) Plus (+) Pound (#) Add Location Add New All All of them North American English Call Cancel Co.
North American English List phones Mobile Mute Mute off New entry No Pager Pair a phone Phone pairing Pairing Phonebook Phone book Previous Record again Redial Return to main menu Return.
SEA TS 10–W ay Driver’s Power Seat — If Equipped The driver’s power seat switches are located on the driver’s front door trim panel. The bottom switch con- trols up/down, forward/rearwar d, and tilt adjustment. The top switch controls the seatback recline adjustment and the middle switch controls the lumbar adjustment.
W ARNING! Adjust the seat only while the vehicle is parked. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured.
Adjustable Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear . Pull up or push down on the head restraint so that the upper edge is as high as practical. T o raise the head restraint, pull up on the head restraint.
Heated Seats — If Equipped This feature heats the driver , front passenger and second row seats. The controls for the front heated seats are located on the door trim panel next to the power seat switches.
NOTE: • If the lights in the second row heated seat switch begin to flash when the switch is pressed, it indicates that the heated seat is not functioning pr operly and that ser- vice is r equired. See your authorized dealer for service. • Once a heat setting is selected, heat will be felt within 2 to 3 minutes.
Second Row Manual Seat Recliner — If Equipped The r ecliner mechanism control is on the outboard side of the seat. T o recline, lean forward slightly , lift the lever , then push back to the desired position and release the lever . Lean forward and lift the lever to return the seatback to its normal position.
W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or fatally injured. Use the recliner only when the vehicle is parked.
W ARNING! Adjust the seat only while the vehicle is parked. Adjusting a seat while the vehicle is moving is dangerous. The seat belt might not be properly adjusted and you could be injured. Second Row Bench Seating — If Equipped The second row seats may be used with either or both seatbacks folded forward for additional storage space.
CAUTION! Be sure there is nothing in front of the second row seat cushion before folding it down. Damage to the seat may occur . Second Row Fold & T umble Seats — If Equipped The second row seats can be folded and tumbled forward for easy access to the third seat or rear cargo area.
5. Pull up on the release handle labeled “2” and lift firmly to tumble the seat fully forward. If the seat contacts the rear of the front seat, move the front seat forward. T o relatch the seat, tilt the seat rearward and push down firmly to engage the r ear attachments.
T o fold and tumble the seat forward, follow these steps: 1. Pull up on the seatback release handle “1” located on the back of the seat to fold the seatback down. 2. Pull the release strap “2” located at the bottom of the seat to lift and tumble the seat forward.
Third Row Seating — If Equipped The thir d r ow seats may be used with either or both seatbacks folded forward for additional storage space. T o fold the seat, remove any objects from in fr ont of or on the seat. Then pull handle located on the seatback and push it forward.
W ARNING! • Not all head restraints in this vehicle are the same. Head restraints from one seating position should not be removed and installed in any other seating position. In a collision, serious injury or death may result if the proper head restraint is not installed on each seat.
3. Pull on the load floor strap and lift the panel from the driver’s second row seatback over the center console and onto the passenger second row seat.
DRIVER MEMOR Y SEA T — IF EQUIPPED If your vehicle is equipped with memory systems, your remote keyless entry transmitter or memory seat buttons on the driver’s door panel can be used to recall the driver’s seat, outside mirrors, adjustable pedals (if equipped) and radio station presets to saved positions.
Y our vehicle has been delivered with two remote keyless entry transmitters. One or both transmitters can be linked to either memory position. Up to eight remote keyless entry transmitters can be used with your vehicle.
Repeat the above steps for the second position using the other driver’s door numbered button and Remote Key- less Entry T ransmitter . Each time the SET (S) button and a numbered button are pressed, you erase the old memory and store a new one. T o Disable A T ransmitter Link, Follow These Steps: 1.
Easy Exit Seat (A vailable with Memory Seat Only) This feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. There are two possible Easy Exit and Easy Entry adjust- ments available: • The seat cushion will move rearwar d approximately 2.
Tilt Mirrors in Reverse (Available with Memory Seat Only) — If Equipped This additional feature provides automatic outside mir- ror positioning which will aid the driver’s view of the ground rearward of the front doors.
Next, push to the left the safety catch located under the front edge of the hood, near the center . Use the hood prop rod to secure the hood in the open position. T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 15 cm (6 inches) and then drop it.
OFF . The lights also turn on when a door is opened or the dimmer control is turned fully upward, past the second detent. NOTE: The lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle.
Multi-Function Lever The Multi-Function Lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and fog lights. The lever is located on the left side of the steering column.
.
NOTE: The engine must be running before the head- lights will come ON in the Automatic mode. Daytime Running Lights (Canada Only) The high beam headlights will come on as Daytime Running Lights whenever the ignition switch is on, the headlights are of f, and the parking brake is off.
NOTE: The fog lights will only operate with the head- lights on low beam. Selecting high beam headlights will turn off the fog lights. T urn Signals Move the lever up or down to signal a right-hand or left-hand turn.
WINDSHIELD WIPERS AND W ASHERS The wipers and washers are operated by a switch on the control lever . The lever is located on the right side of the steering column. Rotate the end of the control lever to select the desired wiper speed. Windshield W ashers T o use the front washer , pull the lever toward you and hold while spray is desired.
Windshield Wiper Operation Rotate the end of the lever to the second detent for Low speed wiper operation, or to the third detent for High speed operation Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable.
continue to operate as long as the lever is pressed. Upon release, the rear wiper will cycle two times before return- ing to the set position. Adding W asher Fluid The fluid reservoir for the windshield washers and the rear window washer is shared.
TIL T STEERING COLUMN T o tilt the column, pull the lever , located behind the turn signal control, toward you and move the steering wheel up or down, as desired. Release the lever to lock the steering wheel firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous.
ELECTRONIC SPEED CONTROL When engaged, this device takes over the accelerator operation at speeds greater than 30 mph (50 km/h). The speed control switches are located on the steering wheel.
T o Set a Desired Speed: When the vehicle has reached the desired speed, press and release the “SET” button. Release the accelerator and the vehicle will operate at the selected speed. The CRUISE SET indicator located near the instrument clus- ter odometer will illuminate showing the electronic speed control is set.
T apping the “COAST” button once will result i na1m p h (2 km/h) speed decrease. Each time the button is tapped, speed decreases. T o Accelerate For Passing: Depress the accelerator as you would normally . When the pedal is released, the vehicle will return to the set speed.
W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety stan- dards.
to HomeLink t for more efficient training and accurate transmission of the radio-frequency signal. Y our vehicle should be parked outside of the garage while training. 1. T urn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1–3 inches (3–8 cm) from the HomeLink t buttons while keeping the indicator in view .
If the red HomeLink t indicator blinks rapidly for two seconds and then remains constant, continue with the next section: “Programing A Rolling Code.
7. Return to the vehicle and press the pr ogrammed HomeLink t button twice (holding the button for 2 sec- onds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a third time (for 2 seconds) to complete the training.
flash, and the EVIC display in the cluster will change from “CHANNEL # TRAINING” to “CHANNEL # TRAINED.” If you unplugged the device for training, plug it back in at this time. Then proceed with the remaining steps. Using HomeLink T T o operate, simply press and r elease the programmed HomeLink t button.
T o do this, press and hold the two outside buttons for 20 seconds until the EVIC message states “CHANNELS CLEARED.” Note that all channels will be erased. Indi- vidual channels cannot be erased. The HomeLink t Universal T ransceiver is disabled when the V ehicle Theft Alarm is active.
The term “IC” before the certification/registration num- ber only signifies that Industry Canada technical specifi- cations were met. ANTI-LOCK BRAKE SYSTEM (ABS) ABS aids the driver in maintaining vehicle control under adverse braking conditions.
ELECTRONIC BRAKE CONTROL SYSTEM - ABS/TCS/BAS/ESP Y our vehicle is equipped with the advanced electronic brake control system that includes Anti-Lock Brake Sys- tem (ABS), T raction Control System (TCS) Brake Assist System (BAS), and Electronic Stability Program (ESP).
W ARNING! • BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
ESP/TCS Indicator Light The “ESP/TCS Indicator Light” located in the instrument cluster , starts to flash as soon as the tir es lose traction and the ESP system becomes active.
ESP Operating Modes The ESP system has 2 available operating modes. ESP ON This is the normal operating mode for ESP . Whenever the vehicle is started the ESP system will be in this mode. This mode should be used for most driving situations. ESP should only be turned to “Partial ESP” for specific reasons as noted below .
raised, and the “ESP/TCS Indicator Light” will be illu- minated. This mode is intended to be used for a more spirited driving experience, or if the vehicle is in deep snow , sand, or gravel conditions and more wheel spin that ESP would normally allow is required.
NOTE: • The “ESP Indicator Light” and the “ESP/BAS W arning Light” come on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned off previously . • The ESP Contr ol System will make buzzing or clicking sounds when it is active.
• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. A message will be displayed in the Electronic V ehic.
The Rear Park Assist System can be active only when the transaxle shift lever is in R (Reverse). If the Rear Park Assist System is enabled at this shift position, the system will be active until the vehicle speed is increased to approximately 1 1 mph (18 km/h) or above.
Rear Park Assist Warning Display The Rear Park Assist W arning Display , located in the headliner near the liftgate glass, pr ovides both visual and audible warnings to indicate the distance between the rear fascia and the detected obstacle.
W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 78.7 in. (200 cm) Y ellow Y es, half second 2nd LED 51.2 in. (130 cm) Y ellow None 3rd LED 45.3 in. (1 15 cm) Y ellow None 4th LED 31.
W ARNING! • Drivers must be careful when backing up even when using the Rear Park Sense System. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up.
NOTE: • Ensure that the rear bumper is free of dirt and debris to keep the system operating properly . • Jackhammers, large trucks, and other vibrations could affect the performance of the system.
If ( SER VICE P ARK ASSIST SYSTEM ( appears in the Electronic V ehicle Information Center (EVIC) after mak- ing sure the rear bumper is clean please see your autho- rized dealer . Cleaning the Rear Park Assist System Clean the Rear Park Assist Sensors with water , car wash soap and a soft cloth.
5. Backup as necessary . 6. Place the sift lever in P (Park) or D (Drive) to exit the Rear Backup Camera system. W ARNING! Drivers must be careful when backing up even when using the Rear Camera System.
OVERHEAD CONSOLE — IF EQUIPPED The overhead console can contain courtesy/reading lights, an optional universal garage door opener (HomeLink t ), storage for sunglasses, optional power sunroof switches and an optional power liftgate switch. Courtesy/Reading Lights At the forward end of the console are two courtesy/ reading lights.
POWER SUNROOF — IF EQUIPPED The power sunroof buttons are located between the sun visors on the overhead console. Press and hold the “OPEN” button rearward to fully open the sunroof. The sunroof can be stopped at any position between closed and full open.
Express Open Feature The sunroof is equipped with an intermediate stop or comfort stop position. This feature is designed to elimi- nate wind buf feting at vehicle speeds between 20-40 mph (32-64 km/h).
W ARNING! • NEVER leave children alone in a vehicle. Occu- pants, particularly unattended children, can be- come entrapped by the power sunroof while oper- ating the power sunroof switch. Such entrapment may result in serious injury or death. Don’t leave the keys in the ignition.
Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. ELECTRICAL POWER OUTLETS There are two 12 volt power outlets located on the instrument panel below the radio. The driver’s side outlet is controlled by the ignition switch and the passenger side outlet is connected directly to the battery .
The outlets include tethered caps labeled with a key or battery symbol indicating the power source. The passen- ger side instrument panel and center console outlets are powered directly from the battery , items plugged into these outlets may discharge the battery and/or prevent engine starting.
CUPHOLDERS Front Seat Cupholders The cupholders are located in the forward edge of the center console. Push down on the forward edge of the console to release the cupholders.
On vehicles equipped with six passenger seating the second row seat cupholders are located in the forward edge of the center console located between the second row seats. Push down on the forwar d edge of the console to release the cupholders. Press the cover up when the cupholders are no longer needed.
Retractable Cargo Area Cover — If Equipped T o cover the cargo ar ea: 1. Fold down the third row seatbacks. 2. Unfold the cargo cover extensions and lock into place. 3. Insert the pins on the ends of the cover into the slots located on the trim panel behind the second row seat- backs.
4. Grasp the center portion of the cover flap. Pull it over the cargo area. 5. Insert the pins on the ends of the cover flap into the slots on the rear trim panel.
• Place as much cargo as possible in front of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway . • Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or collision.
Distribute car go weight evenly on the roof rack cr ossbars. The roof rack does not increase the total load carrying capacity of the vehicle. Be sure the total load of cargo inside the vehicle plus that on the external rack does not exceed the maximum vehicle load capacity .
CAUTION! • Crossbars should remain equally spaced or parallel at any luggage rack position for proper function. Noncompliance could result in damage to the lug- gage rack, cargo and/or vehicle. • T o avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 150 lbs (68 kg).
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panel And Controls ............. 1 8 4 m Base Instrument Cluster .................. 1 8 5 m Premium Instrument Cluster ............... 1 8 6 m Instrument Cluster Descriptions ............ 1 8 7 m Electronic V ehicle Information Center (EVIC) — If Equipped .
▫ FM Reception ........................ 2 1 1 m Sales Code RAH — AM & FM Stereo Radio W ith CD Player And CD/DVD Changer Controls .... 2 1 2 ▫ Radio Operation ...................... 2 1 2 ▫ CD Player Operation ................... 2 1 6 ▫ CD/DVD Changer Operation .
m Navigation System — If Equipped ........... 2 4 4 m Satellite Radio — If Equipped .............. 2 4 5 ▫ ystem Activation ...................... 2 4 5 ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) .................... 2 4 5 ▫ Selecting Satellite Mode In RBB, RAH, REV And RBK Radios .
INSTRUMENT P ANEL AND CONTROLS 184 UNDERST ANDING YOUR INSTRUMENT P ANEL.
BASE INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 185 4.
PREMIUM INSTRUMENT CLUSTER 186 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTIONS 1. V oltage Light This light monitors the electrical system voltage. The light should turn on momentarily as the engine is started. If the light stays on or turns on while driving, it indicates a problem with the charging system.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual.
is not functioning and that service is requir ed. However , the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes.
V ehicles equipped with Anti-Lock brakes (ABS), are also equipped with Electronic Brake For ce Distribution (EBD). In the event of an EBD failure, the Brake W arning Light will turn on along with the ABS Light. Immediate repair to the ABS system is requir ed.
9. T achometer The red segments indicate the maximum permissible engine revolutions-per -minute (rpm. x 1000) for each gear range. Before reaching the red area, ease up on the accelerator . 10. T rip Odometer Button Press this button to change the display from odometer to either of the two trip odometer settings.
NOTE: If the instrument cluster is equipped with the optional Electr onic V ehicle Information Center (EVIC), then all warnings will only display in the EVIC. (Refer to “Electronic V ehicle Information Center (EVIC)” in this section for specific messages).
2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. T urn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this procedur e.
17. Navigation Screen/Rear V iew Camera — If Equipped The navigation system pr ovides maps, turn identifica- tion, selection menus and instructions for selecting a variety of destinations and routes. Refer to your “Navi- gation User’s Manual” for detailed operating instruc- tions.
21. T ire Pressure Monitoring T elltale Lamp Each tir e, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
alternate tires or wheels on the vehicle that prevent the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replace- ment or alternate tires and wheels allow the TPMS to continue to function properly .
For additional information on T ire Pressures, refer to Section 5 — Starting and Operating, “T ire Inflation Pressur es” of this manual. 22. Airbag Light This light turns on and remains on for 6 to 8 seconds as a bulb check when the ignition switch is first turned ON.
28. Electronic Stability Program (ESP) W arning Light/Brake Assist System (BAS) W arning Light — If Equipped The malfunction lamp for the ESP is combined with BAS. The yellow “ESP/BAS W arning Lamp” comes on when the ignition switch is turned to the “ON” position.
When lit solid: There is an A WD system fault. A WD performance will be at a reduced level. Service the A WD system soon. When blinking: The A WD system is temporarily dis- abled due to overload condition.
• PROGRAM KEY & FOB • MEMOR Y #1/#2 POSITION SET (with a single chime) • MEMOR Y #1/#2 POS SELECTED • MEMOR Y SYSTEM DISABLED VEHICLE NOT IN P ARK (with a single chime) • SET INHIBITED D.
• W ASHER FLUID LOW (with a single chime) • PEDAL ADJUST DISABLED CRUISE ENGAGED • PEDAL ADJUST DISABLED VEHICLE IN REVERSE • CHANNEL 1, 2, OR 3 TRANSMIT (with a single chime) • CHANNEL 1, 2.
Oil Change Required Y our vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval.
Customer Programmable Features — If Equipped Press the MENU button until one of the following display choices appears: Language? When in this display you may select one of three lan- guages for all display nomenclature, including the trip computer functions and navigation system.
Use factory Settings? When in this display you may select to use the factory settings and no programmable features will be offer ed. T ilt Mirrors in Reverse? (A vailable with Memory Seat Only) When t.
Remote Linked T o Memory? (A vailable with Memory Seat Only) When this feature is selected the memory seat, mirror , and radio settings will return to the memory set position when the remote keyless entry “Unlock” button is pressed.
turn off when the wipers are turned of f if they were turned on in this way . Pressing the STEP button when in this display will select “Y es” or “No.” NOTE: T urning the headlights on during the daytime causes the instrument panel lights to dim.
Compass Display — If Equipped This display provides one of eight compass readings to indicate the direction the vehicle is facing. Automatic Compass Calibration This compass is self-calibrating which eliminates the need to manually calibrate the compass.
NOTE: Magnetic materials should be kept away from the overhead console. T o set the variance: T urn the ignition switch ON and set the display to Compass. Press the MENU button for approximately 5 seconds but no mor e than 10 seconds. The “COMP ASS V ARIANCE” message and the last vari- ance zone number will be displayed.
• Of f Mode Shows a blank display . • Step Button Push this button to cycle through all the Mini-trip functions. T o Reset The Display Pressing and releasing the Reset button once will clear the resettable function currently being displayed. The resettable function is average fuel economy .
On vehicles equipped with an Analog Clock the radio time display will function as follows: • Radio On — Radio clock will display for approxi- mately 5 seconds after button is pressed, then default back to radio frequency .
you understand and save you concern about these “ap- parent” malfunctions, you must understand a point or two about the transmission and reception of radio sig- nals.
SALES CODE RAH — AM & FM STEREO RADIO WITH CD PLA YER AND CD/DVD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. Radio Operation Power/V olume Control Press the ON/VOL control to turn the radio on.
T oggle the TUNE button to select the following format types: Program T ype Radio Display Adult Hits Adult Hit Classical Classical Classic Rock Classic Rock College College Country Country Information.
no station is found with the selected PTY program type, the radio will return to the last preset station. If a preset button is activated while in the PTY (Program T ype) mode, the PTY mode will be exited and the radio will tune to the preset station.
T one Control The Bass and/or T reble controls sound for the desired tone. Press the AUDIO button, select Bass or TREBLE, then press SEEK + or SEEK 2 to increase or decrease amplification of the band. T o Set The Radio Push-Button Memory When you are receiving a station that you wish to commit to push-button memory , press the SET button.
NOTE: Changes or modifications not expressively ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. CD Player Operation NOTE: • The ignition switch must be in the ON or ACC position and the volume control ON before the CD player will operate.
Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to return to the beginning of the current selection, or return to the beginning of the pr evious selection if the CD is within the first 10 seconds of the current selection.
CD/DVD Changer Operation Press the MODE button to select between the CD player and the optional remote CD/DVD changer . T ime Press the TIME button to change the display from elapsed CD or DVD playing time to time of day . Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recording media and formats are limited.
CD audio tracks and computer files (including MP3 files). Discs cr eated with an option such as 9 keep disc open after writing 9 are most likely multisession discs. The use of multisession for CD audio or MP3 playback may r esult in longer disc loading times.
Playback of MP3 files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
R W/FF (CD Mode For MP3 Play) Press the FF side of the button to move forward through the MP3 selection. Press the R W side of the button to move back through the MP3 selection. AM/FM Button (CD Mode For MP3 Play) Switches back to Radio mode. RND Button (CD Mode For MP3 Play) Pressing this button plays files randomly .
SALES CODE REV — AM & FM STEREO RADIO WITH CD PLA YER AND CD/DVD CHANGER CONTROLS NOTE: The radio sales code is located on the lower left side of your radio faceplate. Radio Operation Power/V olume Control Press the ON/VOL control to turn the radio on.
T oggle the TUNE button to select the following format types: Program T ype Radio Display Adult Hits Adult Hit Classical Classical Classic Rock Classic Rock College College Country Country Information.
no station is found with the selected PTY program type, the radio will return to the last preset station. If a preset button is activated while in the PTY (Program T ype) mode, the PTY mode will be exited and the radio will tune to the preset station.
T one Control The Bass and/or T reble controls sound for the desired tone. Press the AUDIO button, select Bass or TREBLE, then press SEEK + or SEEK 2 to increase or decrease amplification of the band. T o Set The Radio Push-Button Memory When you are receiving a station that you wish to commit to push-button memory , press the SET button.
NOTE: Changes or modifications not expressively ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment. CD Player Operation NOTE: • The ignition switch must be in the ON or ACC position and the volume control ON before the CD player will operate.
Seek Press the top of the SEEK button for the next selection on the CD. Press the bottom of the button to return to the beginning of the current selection, or return to the beginning of the pr evious selection if the CD is within the first 10 seconds of the current selection.
CD/DVD Changer Operation Press the MODE button to select between the CD player and the optional remote CD/DVD changer . T ime Press the TIME button to change the display from elapsed CD or DVD playing time to time of day . Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recording media and formats are limited.
CD audio tracks and computer files (including MP3 files). Discs cr eated with an option such as 9 keep disc open after writing 9 are most likely multi-session discs. The use of multi-session for CD audio or MP3 playback may result in longer disc loading times.
Playback of MP3 files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
R W/FF (CD Mode For MP3 Play) Press the FF side of the button to move forward through the MP3 selection. Press the R W side of the button to move back through the MP3 selection. AM/FM Button (CD Mode For MP3 Play) Switches back to Radio mode. RND Button (CD Mode For MP3 Play) Pressing this button plays files randomly .
NOTE: T o operate a video game unit a DC to AC adapter may be requir ed, plug the adapter into any power outlet. Listed below is the standard RCA Jack/Cable connection. Y ou may also want to refer to the manufactur e’s instructions for the correct colors when connecting the RCA cables.
NOTE: The ignition switch must be in the ON or ACC position before the CD/DVD changer will operate. Operating Instructions — CD/DVD Changer Loading The CD/DVD Changer The premium version has a multi-disc changer , and will accept up to six discs. The base version is a single-disc player , and will only accept one disc.
which numbered position the disc will be loaded into. The disc will automatically be pulled into the CD/DVD changer . 3. Upon insertion, the disc will begin to play , and the light below the loading slot will turn off. On vehicles equipped with the premium version the light above the chosen button will remain illuminated.
EJECT (EJT) Button If there is a disc in the changer , press the EJT button and the disc will eject. If you do not remove the disc within 10 seconds, it will be reloaded and the display will show P AUSE.
Remote Control Buttons 1. Headphone T ransmitter 2. Menu Up/Next T rack/Chapter 3. Menu Left/Fast Rewind 4. Return 5. Setup 6. Pause/Play 7. Mute 8. Display 9. Mode 10. Program Down - Previous Disc 1 1. Program Up - Next Disc 12. Slow 13. Stop 14. Menu 15.
R TN Button (4) This button only functions in CD/DVD mode. Press this button to return to the previous menu when in the disc menu mode. SETUP Button (5) This button only functions in CD/DVD mode. Press the button after pressing the STOP button to access the set up menu.
This button changes between available modes and can be heard in the headphones. PROG UP/DOWN Buttons (10, 1 1) PROG UP selects the next disc loaded in the changer . PROG DOWN selects the previous disc loaded in the changer . SLOW Button (12) This button only functions in DVD video mode.
Light Button (18) Pressing this button illuminates the buttons on the re- mote control. Remote Control Battery Service • T o replace the batteries for the remote control slide the cover rearwar d. The replacement batteries for the remote control are two AAA batteries.
1. Screen W idth Button Changes the width of the screen picture. 2. Enter Button This button will enter the selection from the on-screen menu. 3. Brightness Button Changes the brightness of the screen picture.
Operating Instructions — Headphones 1. Power Button 2. V olume Control 3. Power Indicator Power Button Pressing the power button will turn the headphones ON/OFF . An indicator light will illuminate on the head- phone earpiece to indicate the headphones are ON.
Headphone Battery Service • Press the button at the bottom of each headphone earpiece and lift the cover upward. • Replace the battery in each earpiece and reinstall the cover . The headphones requir e two AAA batteries. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada.
Operating Instructions — Auxiliary Input • Connect your auxiliary device (video game system, video camera, or MP3 player) cables to the color coded auxiliary jacks on the front of the DVD changer . (Refer to the illustration below). • T urn your auxiliary device on and adjust its volume to mid or high position.
NA VIGA TION SYSTEM — IF EQUIPPED The navigation system pr ovides maps, turn identifica- tion, selection menus and instructions for selecting a variety of destinations and r outes. The buttons to operate the system ar e located on the instrument panel next to the analog clock.
SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast.
DOWN (-) will page down until the first four digits are displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since any button was pushed.
Selecting a Channel Press and r elease the SEEK or TUNE buttons to sear ch for the next channel. Press the top of the button to search up and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released.
NOTE: Pressing the 9 SEEK 9 or 9 SCAN 9 button while performing a music type scan will change the channel by one and stop the sear ch. Pr essing a pre-set memory button during a music type scan, will call up the memory channel and stop the search.
REMOTE SOUND SYSTEM CONTROLS The remote sound system controls ar e located on the rear surface of the steering wheel at the 3 and 9 o’clock positions. The right hand rocker switch has a push button in the center and controls the volume and mode of the sound system.
CD/DVD DISC MAINTENANCE T o keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge.
Manual Air Conditioning and Heating System Power Button When the “POWER” button is pressed the indicator will illuminate and the blower will run at the speed selected by the front blower control.
Dual Zone T emperature Control — If Equipped W ith the Dual Zone T emperature Control System, each front seat occupant can independently control the tem- perature of air coming from the outlets on their side of the vehicle. This is accomplished by having a separate temperatur e control lever for both the driver and front seat passenger .
Panel Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air . Moving the air vane knob on the center outlets down, will close off the air flow from the center outlets.
Bi-Level Mode Air comes from both the instrument panel outlets, floor outlets and defrost. A slight amount of air is also dir ected through the side window demister outlets. NOTE: In many temperature lever positions, the bi- level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Air comes fr om the floor , defrost and side window demist outlets. This mode works best in cold or snowy conditions.
Defrost Mode Air comes from the windshield and side window demist outlets. Use this setting when necessary to defrost your windshield and side windows. NOTE: For impr oved safety , the compressor is activated and the recirculation mode is deactivated when Mix or Defrost modes ar e selected.
NOTE: • The compressor will not engage until the engine has been running for a few seconds. • If your air conditioning performance seems lower than expected, check the A/C air filter (A TC equipped vehicles only) and the front of the A/C condenser for an accumulation of dirt or insects.
• If the recirculation button is pressed while in the Mix or Defr ost mode, the indicator light in the r ecirculation button will flash 3 times indicating that r ecirculation is not allowed.
Dual-Zone Automatic T emperature Control The Dual Zone Automatic T emperature Control (A TC) System automatically maintains the interior comfort level desired by the driver and front seat passenger . This is accomplished by using two infrared sensors located in the center of the instrument panel.
temperature you would like the system to maintain. When the system is set to your comfort level, it is not necessary to change the settings. Y ou will experience the greatest ef ficiency by allowing the system to function automatically . The system will operate fully automati- cally in either 9 AUTO HI 9 or 9 AUTO LO 9 .
This feature may be enabled using the following pr oce- dure: • Press and hold the Heated Rear W indow and Auto HI buttons for 5 seconds. • The “DELA Y” symbol will flash to indicate that the feature as been enabled. Power Button This button turns the entire system ON/OFF .
The front blower control can be set to any fixed blower speed by pressing the rocker switch up or down. This allows the front occupants to control the volume of air cir culated in the vehicle and cancel the auto mode.
Bi-Level Mode Air comes from both the instrument panel outlets and floor outlets. A slight amount of air is also directed through the defrost and side window demister outlets. NOTE: In many temperatur e positions, the bi-level mode is designed to provide cooler air out of the panel outlets and warmer air from the floor outlets.
Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Air comes fr om the floor , defrost and side window demist outlets. This mode is not used when operating in either 9 AUTO HI 9 or 9 AUTO LO 9 .
Defrost Mode Air comes from the windshield and side window demist outlets. Use this setting when necessary to defrost your windshield and side windows. If a fog or mist on the windshield or side glass starts to impair visibility , press the front blower button and increase the fan speed to maximum.
windshield or side glass starts to impair visibility , press the front blower button and increase the fan speed to maximum. Recirculation Control When the outside air contains smoke, odors, high humidity , or if rapid cooling is desired you may wish to recirculate interior air by pressing the recir culation button.
• While holding the recirculation button, turn the igni- tion switch to the “RUN” position. • Continue holding the recir culation button for 4 sec- onds, then release. The recir culation control is now programmed so that the recir culation mode will not reset to the outside air mode when the engine is restarted.
glycol antifreeze coolant in water is recommended. Refer to section 7, Maintenance Procedur es, of this manual for proper coolant selection. W inter Operation T o insure the best possible heater and d.
A/C Air Filter — If Equipped On vehicles equipped with Automatic T emperature Con- trol (A TC), the climate control system filters out dust and pollen from the air .
.
ST ARTING AND OPERA TING CONTENTS m Starting Procedures ..................... 2 7 5 ▫ Automatic T ransmission ................ 2 7 6 ▫ Normal Starting (Above 32°F / 0°C) ........ 2 7 6 ▫ Extremely Cold W eather Starting (Below 2 20°F / –29°C) .
m Parking Brake ......................... 2 8 5 m Brake System .......................... 2 8 7 ▫ Anti-Lock Brake System ................ 2 8 8 m Power Steering ........................ 2 9 0 m Driving On Slippery Surfaces .............. 2 9 1 ▫ Acceleration .
m Snow T ires ........................... 3 1 3 m T ire Rotation .......................... 3 1 3 m T ire Pressure Monitor System (TPMS) ........ 3 1 4 ▫ Basic TPMS W ithout EVIC — If Equipped .... 3 1 7 ▫ Basic TPMS W ith EVIC — If Equipped .
▫ Overloading ......................... 3 3 2 ▫ Loading ............................ 3 3 3 m T railer T owing ......................... 3 3 4 ▫ Common T owing Definitions ............. 3 3 4 ▫ T railer Hitch Classification ............... 3 3 8 ▫ T railer T owing W eights (Maximum T railer W eight Ratings) .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! • Be sure to turn off the engine and remove the key from the ignition switch if you want to rest or sleep in your car .
Automatic T ransmission The gear selector must be in the NEUTRAL or P ARK position before you can start the engine. Depress the brake pedal before shifting into any driving gear . Normal Starting (Above 32°F / 0°C) 1. Do not depress the accelerator .
If Engine Fails T o Start If the engine fails to start after you have followed the “Normal Starting” procedure, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded.
released. If this occurs, continue cranking with the accel- erator pedal pushed all the way to the floor . Release the accelerator pedal and the key once the engine is running smoothly .
CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
Automatic T ransmission Ignition Interlock System This system prevents the key from being removed unless the shift lever is in P ARK. It also prevents shifting out of P ARK unless the key is in the ACCESSOR Y or ON position.
possible convenience. Y our dealer has diagnostic equip- ment to determine if the problem could recur . Gear Ranges DO NOT race the engine when shifting from P ARK or NEUTRAL positions into another gear range. “P” Park Supplements the parking brake by locking the transmis- sion.
AUTOSTICK AutoStick is a driver-interactive transmission that offers manual gear shifting capability to provide you with mor e control. AutoStick allows you to maximize engine brak- ing, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance.
• T ransaxle shifting will be more noticeable when Auto- stick t is engaged. • If a low range is selected and the engine accelerates to the rev limit, the transaxle will automatically select the next higher ratio. • If a downshift would cause the engine to over-speed, that shift will not occur until it is safe for the engine.
W ARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something.
P ARKING BRAKE When the parking brake is applied with the ignition switch on, the brake light in the instrument cluster will turn on. NOTE: This light only shows that the parking brake is applied.
added precaution, turn the front wheels toward the curb on a downhill grade and away from the curb on a uphill grade. The parking brake should always be applied when the driver is not in the vehicle. W ARNING! • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury .
BRAKE SYSTEM Y our vehicle is equipped with power assisted brakes as standard equipment. In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function.
Anti-Lock Brake System The Anti-Lock Brake System pr ovides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to prevent wheel lock-up.
The ABS light monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir ed.
• and a slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS. W ARNING! The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment.
W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible.
T raction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precau- tions should be observed: 1.
Shallow Standing W ater Although your vehicle is capable of driving through shallow standing water , consider the following before doing so: CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances.
• European Metric tire sizing is based on European design standards. T ires designed to this standard have the tire size molded into the sidewall beginning with the section width. The letter 9 P 9 is absent from this tire size designation. Example: 215/65R15 96H • L T (Light T ruck)-Metric tire sizing is based on U.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ( ....blank.... ( = Passenger car tire based on European design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar .
.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle.
302 ST ARTING AND OPERA TING.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, af fect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will r educe tr ead life resulting in a need for earlier tire replacement. Under inflation, also increases tire r olling resistance and results in higher fuel consump- tion.
check tire pressure. Do not make a visual judgement when determining pr oper inflation. Radial tir es may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped).
T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important.
Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tir es. It is engineered to be used on your style vehicle only . Since this tire has limited tread life, the original tire should be repaired (or replaced) and rein- stalled at the first opportunity .
original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling. Since it is not the same tir e, replace (or repair) the original tire and reinstall on the vehicle at the first opportunity .
T read Wear Indicators T read wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tr ead depth becomes 1/16 inch (2 mm).
W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.
Improper alignment will not cause vehicle vibration. V ibration may be a r esult of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear . TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications.
NOTE: In order to avoid damage to tires, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufacturer’s instructions on method of installation, operating speed, and conditions for usage.
Follow the r ecommended tire rotation fr equency for your type of driving found in the “Maintenance Schedules” Section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corrected prior to r otation being per- formed.
The TPMS will warn the driver of a low tire pressure if the tire pressur e falls below the low pressur e warning threshold for any r eason, including low temperature effects, or natural air pressure loss through the tire.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style.
• The TPMS is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure, using an accurate tire pressur e gage, even if under-inflation has not reached the level to trigger illumination of the TPMS T elltale Lamp.
NOTE: The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this infor- mation. The TPMS T elltale Lamp will flash on and off for 75 seconds, and remain on solid when a system fault is detected. The system fault will also sound a chime.
Basic TPMS with EVIC — If Equipped The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure lev- els. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressur e readings to the Receiver Module.
sequence will repeat, providing the system fault still exists. The TPMS T elltale Lamp will turn off when the fault condition no longer exists. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio fr equencies as the TPMS sensors.
NOTE: It is particularly important, for you to check the tire pressur e in all of your tires regularly and to maintain the proper pressure. The TPMS consists of the following components: • Receiver .
NOTE: Low pressure in the spare or compact tire (which has no sensor and therefore not monitored) will not cause the TPMS T elltale Lamp to illuminate or the chime to sound.
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists If the system fault no longer exists, the TPMS T elltale Light will no longer flash, the “SER VICE TIRE SYSTEM SOON” text mes- sage will not be present, and a pressur e value will be displayed instead of dashes.
NOTE: • Y our vehicle is equipped with a compact spare wheel and tire assembly that does not have a tire pressur e monitoring sensor . Therefor e, it will not be monitored by the TPMS.
FUEL REQUIREMENTS 3.8L GASOLINE ENGINES The 3.8L engine is designed to meet all emissions regulations and provide excel- lent fuel economy and performance when using high quality unleaded “r egular” gasoline having an octane rating of 87. The use of premium gasoline is not recom- mended.
Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifica- tions (the W orld W ide Fuel Charter , WWFC) to define fuel pr operties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle.
MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles.
• An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service.
• Guard against carbon monoxide with proper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly .
W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the malfunction indicator light to turn on.
T ighten the fuel filler cap pr operly and press the odometer reset button to turn the gASCAP message off. • Make sur e that the fuel filler cap is tightened each time the vehicle is refueled. • If the problem continues, the message will appear the next time the vehicle is started.
Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle Weight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles.
Loading T o load your vehicle properly , first figur e out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible.
Example Only Front Axle Rear Axle Empty W eight 2538 lbs (1 151 kg) 2076 lbs (942 kg ) Load (Including driver , passengers and cargo) 223 lbs (101 kg) 890 lbs (404 kg) T otal 2762 lbs (1253 kg) 2968 l.
Gross Combination W eight Rating (GCWR) The gross combination weight rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings in- clude a 150 lbs (68 kg) allowance for the presence of a driver).
W eight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kind of hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers.
W eight Distributing Hitch System Improper Adjustment of W eight Distributing System ST ARTING AND OPERA TING 337 5.
T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package.
3.8L & 4.0L Automatic with Engine Oil Cooler Engine/T ransmission GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.8L & 4.0L Auto- matic with Engine Oil Cooler 8,600 lbs (3 900 kg) 40 SQ. FT . Up to 2 persons & Luggage 3,500 lbs (1 600 kg) 350 lbs (158 kg) 8,600 lbs (3 900 kg) 40 SQ.
3.8L & 4.0L Automatic WITHOUT Engine Oil Cooler Engine/T ransmission GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.8L & 4.0L Auto- matic WITHOUT Engine Oil Cooler 7,700 lbs (3 492 kg) 40 SQ. FT .
T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer -installed options, must be consider ed as part of the total load on your vehicle.
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be dif ficult for the driver to control.
4. T ongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tire.
− T railer brakes are recommended for trailers over 1,000 lbs (454 kg) and requir ed for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity .
The T railer T ow Package may includ ea4a n d7p i n wiring harness. Use a factory approved trailer harness and connector . NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector .
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the “3” range should be selected.
T owing T ips — Electronic Speed Control (If Equipped) − Don’t use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.
WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher .................. 3 5 0 m If Y our Engine Overheats ................. 3 5 1 m Jacking And T ire Changing ................ 3 5 2 ▫ Jack Location ........................ 3 5 2 ▫ Spare T ire Stowage .
HAZARD W ARNING FLASHER The hazar d flasher switch is located in the center of the instrument panel above the center air outlets. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel.
NOTE: W ith extended use, the Hazard W arning Flash- ers may wear down your battery . IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- tion. • On the highways — Slow down.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7, Maintenance, of this manual.
Six Passenger Seating The jack and jack-handle are stowed in the rear storage bin located in the rear cargo floor . Pull up on the storage bin cover and liner to access the jack and jack tools.
Spare Tire Stowage Five Passenger Seating The spare tir e is stowed under the rear of the vehicle by means of a cable winch mechanism. T o remove or stow the spare, use the jack handle to rotate the “spare tire drive” nut. The nut is located under the plastic cover at the center rear of the car go floor area, just inside the liftgate opening.
CAUTION! The winch mechanism is designed for use with the jack handle only . Use of an air wrench or other power tools is not recommended and can damage the winch. When the spare is clear , tilt the retainer at the end of the cable and pull it through the center of the wheel.
Jacking Instructions W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
1. Remove the spare wheel, scissors jack and jack-handle from stowage. 2. Carefully pry off the wheel center cap if equipped, using the tip of the jack handle. 3. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground.
location. Do not raise the vehicle until you are sure the jack is securely engaged. Never jack up the vehicle using any suspension components. 6. Raise the vehicle by turning the jack scr ew to the right, using the swivel wrench.
lug nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N·m (95 ft. lbs). If in doubt about the correct tightness, have them checked with a torque wrench by your dealer or at a service station. 1 1. Lower the jack to its fully closed position.
NOTE: When reinstalling the wheel center cap, insure that the valve stem symbol on the back of the cap is pointed toward the wheel valve stem. Install the center cap using hand pressur e only .
When jump starting, proceed as follows: 1. W ear eye pr otection and r emove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. 2. When boost is provided by a battery in another vehicle, park that vehicle within booster cable reach and without letting the vehicles touch.
W ARNING! Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. During cold weather when temperatures are below freezing point, electrolyte in a discharged battery may freeze.
and Drive. Usually the least accelerator pedal pressure to maintain the r ocking motion without spinning the wheels is most effective. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure.
operative, or if the vehicle is to be towed more than 100 miles (160 km), the vehicle must be towed with the front wheels off the ground. All Wheel Drive Y our vehicle may be towed under the following.
If it is necessary to use the accessories while being towed (wipers, defrosters, etc.), the key must be in the ON position, not the ACCESSORY position. Make certain the transmission remains in NEUTRAL. Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position.
.
MAINT AINING YOUR VEHICLE CONTENTS m 3.8L Engines .......................... 3 7 0 m 4.0L Engines .......................... 3 7 1 m Onboard Diagnostic System — OBD II ........ 3 7 2 ▫ Loose Fuel Filler Cap Message ............ 3 7 3 m Emissions Inspection And Maintenance Programs .
▫ Front & Rear Suspension Ball Joints ........ 3 8 5 ▫ Steering Shaft Seal .................... 3 8 5 ▫ Steering Linkage ...................... 3 8 6 ▫ Drive Shaft Universal Joints .............. 3 8 6 ▫ Body Lubrication ................
▫ Front Park/T urn Signal And Sidemarker Lights ............................. 4 1 3 ▫ Front Fog Light ...................... 4 1 4 ▫ Rear T ail, Stop, T urn Signal, Side Marker And Back-Up Lights ....................... 4 1 5 ▫ License Light .
3.8L ENGINES Engine Compartment 3.8L Engines 370 MAINT AINING YOUR VEHICLE.
4.0L ENGINES Engine Compartment 4.0L Engine MAINT AINING YOUR VEHICLE 371 7.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission contr ol systems.
Loose Fuel Filler Cap Message Should the “Loose Fuel Filler Cap” or “gASCAP” mes- sage appear , there may be a problem in the evaporative system. Before taking the vehicle into a qualified Dealer- ship Service center , check first to see if the fuel filler cap is possibly loose, improperly installed, or damaged.
Y our vehicle has a simple ignition key actuated test, which you can use prior to going to the test station. T o check if your vehicle’s OBD system is r eady , you must do the following: 1. Insert your ignition key into the ignition switch. 2. T urn the ignition to the ON position, but do not crank or start the engine.
vehicle serviced befor e going to the I/M station. The I/M station can fail your vehicle because the MIL symbol is on with the engine running. REPLACEMENT P ARTS Use of genuine Mopar t parts for normal/scheduled maintenance and repairs is highly recommended to in- sure the designed performance.
MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there ar e fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance.
CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system.
American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. Engine Oil V iscosity (SAE Grade) — 4.
Materials Added to Engine Oil The manufacture strongly recommends against the addi- tion of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered product and it’s performance may be impaired by supplemental ad- ditives.
plug. Malfunctioning spark plugs can damage the cata- lytic converter . For proper type of replacement spark plugs, refer to the “V ehicle Emission Control Informa- tion” label in the engine compartment.
Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition.
T o minimize the possibility of catalyst damage: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion.
CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and identified on the battery case.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
Refer to the “Maintenance Schedule” section of this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required.
Steering Linkage The tie rod end ball joints are permanently lubricated and do not requir e periodic maintenance. Drive Shaft Universal Joints Y our vehicle has constant velocity universal joints. Peri- odic lubrication of these joints is not r equired.
Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner . This will remove accu- mulations of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades.
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system,.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position.
drain from the coolant recovery bottle. DO NOT RE- MOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled.
Adding Engine Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles before replacement. T o prevent reducing this extended mainte- nance period, it is important that you use the same coolant throughout the life of your vehicle.
W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the front of the engine compartment.
• Do not change the thermostat for summer or winter operation. If r eplacement is ever necessary , install ONL Y the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions.
W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou wouldn’t have your full braking capacity in an emergency .
should be replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure. W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuf fing, or worn spots, have the brake hoses replaced immediately .
W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of brake fluid that may have a lower initial boiling point or unidentified as to specification, may result in sudden brake failure during hard prolonged braking.
Care should be taken in installing quick connect fittings to insure they are properly installed and fully connected. See your authorized dealer for service. Automatic T ransmission The automatic transmission and dif ferential assembly ar e contained within a single housing.
Procedure For Checking Fluid Level The fluid level in the automatic transmission should be checked whenever the vehicle is serviced. Operation with an improper fluid level will greatly reduce the life of the transmission and of the fluid. T o properly check the automatic transmission fluid level, the following procedur e must be used: 1.
If the fluid level indicates low , add suf ficient fluid to bring to the proper level. CAUTION! Do not overfill. Dirt and water in the transmission can cause serious damage. T o prevent dirt and water from entering the transmission after checking or replenishing fluid, make certain that the dipstick cap is reseated properly .
Power T ransfer Unit The fill plug is located on the side of the power transfer unit housing. The fluid should be maintained at a level even with the bottom of the fill plug hole when the vehicle is parked on a level surface.
hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under- body protection. The following maintenance recommendations will enable you to obtain maximum benefit fr om the corrosion resistance built into your vehicle.
CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose of f the undercarriage at least once a month.
heavy soil and/or excessive brake dust, use Mopar t Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner . Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Only Mopar t or equivalent is recommended.
YES Essentials t Fabric Cleaning Procedure – If Equipped YES Essentials t seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel.
1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners.
FUSES (INTEGRA TED POWER MODULE) An Integrated Power Module (IPM) is located in the engine compartment near the battery . This center con- tains maxi fuses, mini fuses and relays. A label that identifies each component is printed on the inside of the cover .
Cavity Cartridge Fuse Description 9 40 Amp Green Power Sunroof 10 Spare 1 1 40 Amp Green Headlight W asher , Power Liftgate 12 Spare 13 40 Amp Green Radiator Fan 1 14 Spare 15 40 Amp Green Anti-Lock B.
Cavity Mini Fuse Description 29 20 Amp Y el- low Cluster , CHMSL, Stop Lights, Anti-Lock Brake System (ABS) 30 10 Amp Red Ignition Switch 31 20 Amp Y el- low Hazard 34 Spare 35 Spare 36 20 Amp Y el- l.
CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Center & Rear Reading Lights ............... 5 7 8 Front Door Courtesy Light .................. 5 7 8 Liftgate Light(s) .......................... 5 7 8 Overhead Console Reading Lights .
BULB REPLACEMENT Headlights 1. Open hood, disconnect and isolate the battery nega- tive cable. 2. Remove the two screws securing the headlight mod- ule to the vehicle and gently pull the headlight module forward away from the vehicle, disengaging the assem- bly from the lower attachment clip.
High Intensity Discharge Headlights (HID) — If Equipped The headlights are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlight switch off and the key removed. Because of this, you should not attempt to service a headlight bulb yourself.
2. Remove the two screws securing the headlight mod- ule to the vehicle and pull the headlight module forward away from the vehicle, disengaging the assembly from the lower attachment clip. 3. T wist the bulb socket to remove from the headlight module and pull the bulb from socket.
Rear T ail, Stop, T urn Signal, Side Marker and Back-up Lights 1. Raise the liftgate. 2. Remove the two tail light assembly screws and rotate the assembly outward to remove the ball stud form the attaching grommet. 3. T wist the socket assembly to r emove it from the housing.
FLUIDS AND CAP ACITIES U.S. Metric Fuel All Engines 23 gallons 87 liters Engine Oil-W ith Filter 4.0 Liter Engines (SAE 10W -30, API Certified) 5.5 qts 5.2 liters 3.8 Liter Engines (SAE 5W -20, API Certified) 5.0 qts 4.7 liters Cooling System * 4.0 Liter Engines (Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula or equiva- lent) 10.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent 3.8 Liter Engine Oil Use API Certified SAE 5W -20 engine oil.
Chassis Component Fluids, Lubricants and Genuine Parts Automatic T ransmission Mopar t A TF+4 Automatic T ransmission Fluid. A WD Power T ransfer Unit Mopar t Gear Lubricant 75W -90 or equivalent. A WD Rear Carrier Mopar t Gear Lubricant 75W -90 or equivalent.
MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 4 2 0 m Maintenance Schedule ................... 4 2 0 ▫ Required Maintenance Intervals .
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
• Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed. • Check all lights and other electrical items for corr ect operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines.
Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter . 6,000 10 000 6 Rotate T ires.
Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change Rear Drive Assembly (RDA) fluid.
W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 4 2 8 ▫ Prepare For The Appointment ............ 4 2 8 ▫ Prepare A List ........................ 4 2 8 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
T o contact NHTSA, you may either call the Auto Safety Hotline toll fr ee at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administrator , NHTSA, 400 Seventh Street, SW ., W ash- ington, DC 20590.
• Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer- controlled vehicle systems and features.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car .
T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
.
INDEX 10.
Adding Fuel ........................... 3 2 9 Adding W asher Fluid .................. 142,387 Additives, Fuel ......................... 3 2 7 Adjustable Pedals ....................... 1 5 9 Air Conditioner Maintenance ............... 3 8 3 Air Conditioning .
Reset Mode .......................... 2 8 0 Selection Of Lubricant ................ 398,418 Shifting ............................. 2 8 1 Special Additives ...................... 4 0 0 Automatic T ransmission ................ 398,400 Adding Fluid .....
Caps, Filler Fuel ................................ 3 2 9 Oil (Engine) .......................... 3 7 8 Radiator (Coolant Pressur e) ............... 3 9 1 Car W ashes ............................ 4 0 2 Carbon Monoxide W arning ................. 3 2 8 Cargo Area Cover .
Console, Overhead ....................... 1 6 8 Contract, Service ........................ 4 3 0 Coolant Pressur e Cap (Radiator Cap) .......... 3 9 1 Cooling System ......................... 3 8 9 Adding Coolant (Antifreeze) .............. 3 9 1 Coolant Capacity .
Drive Belts ............................ 3 7 9 Drive Shaft Universal Joints ................ 3 8 6 Driving On Slippery Surfaces .................... 2 9 1 Through Flowing, Rising, or Shallow Standing W ater .............................. 2 9 2 DVD Player (V ideo Entertainment System) .
Oil Change Interval ............... 192,202,377 Oil Disposal .......................... 3 7 9 Oil Filler Cap ......................... 3 7 8 Oil Filter Disposal ...................... 3 7 9 Oil Selection ....................... 377,416 Oil Synthetic .
Freeing A Stuck V ehicle ................... 3 6 2 Fuel ................................. 3 2 5 Adding ............................. 3 2 9 Additives ............................ 3 2 7 Clean Air ............................ 3 2 6 Filler Cap (Gas Cap) .
Hazard W arning Flasher ................... 3 5 0 Head Phones ........................... 2 4 1 Head Restraints ......................... 1 1 7 Headlights ............................ 4 1 3 Bulb Replacement ...................... 4 1 2 High Beam .....
Jack Location ........................... 3 5 2 Jack Operation ....................... 352,356 Jacking Instructions ...................... 3 5 6 Jump Starting .......................... 3 6 0 Key , Programming ........................ 1 7 Key , Replacement .
Hazard W arning Flasher ................. 3 5 0 Headlight Switch ...................... 1 3 6 Headlights ..................... 136,412,413 High Beam Indicator .................... 1 9 3 Illuminated Entry ....................... 2 0 Instrument Cluster .
Maintenance Free Battery .................. 3 8 2 Maintenance Procedur es ................... 3 7 6 Maintenance Schedule .................... 4 2 0 Maintenance, Sunroof ..................... 1 7 2 Malfunction Indicator Light (Check Engine) . . 193,373 Manual, Service .
Filter ............................ 379,417 Filter Disposal ........................ 3 7 9 Identification Logo ..................... 3 7 8 Materials Added to ..................... 3 7 9 Recommendation ................... 377,416 Synthetic ............
Preparation for Jacking .................... 3 5 5 Pretensioners Seat Belts ............................. 4 7 Programmable Electronic Features ......... 147,203 Programming T ransmitters (Remote Keyless Entry) .............................. 24,147 Radial Ply T ires .
Rocking V ehicle When Stuck ................ 3 6 2 Roof Rack (Luggage Rack) ................. 1 7 8 Rotation, T ires .......................... 3 1 3 Safety Checks Inside V ehicle ................. 7 9 Safety Checks Outside V ehicle ............... 8 0 Safety Defects, Reporting .
Sentry Key Programming ................... 1 7 Service Assistance ....................... 4 2 8 Service Contract ......................... 4 3 0 Service Engine Soon Light (Malfunction Indicator) ............................. 1 9 3 Service Manuals ....
System, Navigation ...................... 2 4 4 T achometer ............................ 1 9 1 T emperature Contr ol, Automatic (A TC) ........ 2 5 9 T emperature Gauge, Engine Coolant ....... 187,351 T ether Anchor , Child Restraint ............. 71,74 T ie Down Hooks, Cargo .
Disabled V ehicle ....................... 3 6 3 Guide .............................. 3 3 8 Recreational ....................... 348,365 W eight .............................. 3 3 8 T raction Control ...................... 154,190 T raction Control Switch .
デバイスChrysler Pacifica (2008)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Chrysler Pacifica (2008)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはChrysler Pacifica (2008)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Chrysler Pacifica (2008)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Chrysler Pacifica (2008)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Chrysler Pacifica (2008)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はChrysler Pacifica (2008)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Chrysler Pacifica (2008)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちChrysler Pacifica (2008)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
