ChryslerメーカーTown & Country (2010)の使用説明書/サービス説明書
ページ先へ移動 of 538
Town & Country O W N E R ’ S M A N U A L 2 0 1 0 I n f o r m a t i o n P r o v i d e d b y :.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS 䡵 Intr oduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations .
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
1 INTRODUCTION 5 I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against pr oce- dures that could r esult in damage to your vehicle. If you do not read this entire manual, you may miss important information.
VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
I n f o r m a t i o n P r o v i d e d b y :.
THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ W ireless Ignition Node (WIN) ............ 1 2 䡵 Sentry Key 威 .......................... 1 4 ▫ Replacement Keys ..................... 1 5 䡵 V ehicle Security Alarm — If Equipped .
▫ Power Sliding Side Door — If Equipped ..... 4 2 ▫ Sliding Side Door Child Protection Lock ..... 4 6 䡵 Liftgate ............................. 4 8 ▫ Power Liftgate — If Equipped ............ 4 9 䡵 Occupant Restraints ....................
▫ Restraining Infants And Small Children W ith Seat Delete Feature (Commercial V ehicles Only) .............................. 9 8 䡵 Engine Break-In Recommendations ......... 1 0 0 䡵 Safety T ips .......................... 1 0 1 ▫ T ransporting Passengers .
A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up.
Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the rear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the RKE transmitter go dead.
NOTE: Power window switches will also remain active for up to 90 seconds after the ignition switch has been turned to LOCK, depending upon the accessory delay setting. Opening the front door will cancel this feature. W ARNING! NEVER leave children alone in a vehicle.
vehicle can be used to start and operate the vehicle. The system will shut the engine off in two seconds if an invalid Key Fob is used to start the engine. After turning the ignition switch to the ON position, the V ehicle Security Light will turn on for three seconds for a bulb check.
CAUTION! Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unattended. At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location.
lamps and/or turn signals will flash and V ehicle Security Light will flash repeatedly and the horn will sound. For an additional 15 minutes, only the headlights, park lamps and/or turn signals and V ehicle Security Light will flash. The engine will run only if a valid key is used to start the vehicle.
• The V ehicle Security Alarm remains armed during liftgate entry . Pressing the liftgate button will not disarm the V ehicle Security Alarm. If someone enters the vehicle through the liftgate and opens any door the alarm will sound. • When the V ehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors.
NOTE: • The front courtesy over head console and liftgate lights do not turn on if the dimmer control is in the interior lights ON position (extreme top position). • The Illuminated Entry System will not operate if the dimmer control is in the extr eme downward position.
Using the RKE T ransmitter Three-button RKE transmitters will provide basic UN- LOCK, LOCK and P ANIC functions. Seven-button RKE transmitters will provide functions that allow the same basic operation as the three-button, but may also be used to operate the power liftgate (optional), power sliding doors, Remote Start feature (optional).
Remote Unlock Doors and Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s side or twice to unlock all doors and liftgate.
NOTE: Pressing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate the V ehicle Security Alarm. Opening a door with the V ehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the V ehicle Security Alarm.
2. Press the LOCK button on a programmed RKE trans- mitter for at least 4 seconds, but no longer than 10 sec- onds. Then, press the P ANIC button while still holding the LOCK button.
If the liftgate is locked and is not equipped with a powered liftgate, pressing the LIFTGA TE button twice will result in the liftgate becoming unlocked for 30 sec- onds allowing you to manually access the liftgate area. The power liftgate may also be opened and closed by pressing the LIFTGA TE button located on the overhead console.
• For vehicles not equipped with the EVIC, perform the following steps: 1. Perform this operation while standing outside the vehicle. 2. Press and hold the UNLOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds.
T ransmitter Battery Replacement The recommended replacement battery is one CR2032 battery . NOTE: • Perchlorate Material — special handling may apply . See: www .dtsc.ca.gov/hazardouswaste/perchlorate. • Do not touch the battery terminals that are on the back housing or the printed circuit board.
REMOTE ST ARTING SYSTEM — IF EQUIPPED This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security .
T o Enter Remote Start Mode Press and release the REMOTE ST ART button on the RKE transmitter twice within five sec- onds. The vehicle doors will lock, parking lights will flash and horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle.
equipped). Then, prior to the end of the 15-minute cycle, insert the Key Fob into the ignition switch and turn the switch to the ON position. NOTE: • The ignition switch must be in the ON position in order to drive the vehicle.
failed start, where the Remote Starting sequence was initiated but the engine stopped cranking without start- ing. After either of these conditions, or if the V ehicle Security Alarm system is alarmin.
If the lock plunger is rearward when you shut either side sliding door , the door will lock. Make sure the keys are not inside the vehicle before closing the door . W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
Power Door Locks — If Equipped A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the Key Fob is in the ignition, and any front door is open, the power locks will not operate.
If you press the power door lock switch while the sliding door is open, the sliding door will lock. Lock Doors Automatically — If Equipped If the Lock Doors Automatically feature is enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
2. Fasten your seat belt. (Fastening the seat belt will cancel any chiming that may confuse you during this programming procedur e.) 3. Place the Key Fob into the ignition. 4. W ithin 15-seconds, cycle the ignition Key Fob from the LOCK position to the ON/RUN position a minimum of five times, ending in the ON position (do not start the engine) .
• On vehicles equipped with the optional Electronic V ehicle Information Center (EVIC), refer to “Electr onic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr ogrammable Features)” in “Understand- ing Y our Instrument Panel” for further information.
WINDOWS Power V ent Windows — If Equipped Switches on the driver’s door trim panel let the driver operate the two vent windows from the driver’s seat. Power Windows Y ou can control either the front or r ear windows using switches located on the driver’s door trim panel.
NOTE: Power W indow switches will also remain active for up to 10 minutes after the ignition switch has been turned to LOCK, depending upon the accessory delay setting.
Front Passenger Power Window Switch There is a single switch on the front passenger’s door trim panel which operates the passenger door window and locks and unlocks all doors. The switch will operate only when the ignition switch is in the ON or ACC position and during power accessory delay .
Sliding Side Door Power Window Switch — If Equipped Second row passengers may open and close the sliding door window by a single switch on the door handle assembly . The switches will operate only when the ignition switch is in the ON or ACC position and during power acces- sory delay .
Auto-Down Feature — If Equipped The front window switches may be equipped with an Auto-Down feature. Press the window switch past the detent, release, and the window will go down automati- cally . T o open the window part way , press the window switch part way and release it when you want the window to stop.
W ARNING! There is no anti-pinch protection when the window is almost closed. T o avoid personal injury be sure to clear your arms, hands, fingers and all objects from the window path before closing. Auto Up Reset — If Equipped T o reactivate the Auto Up feature, perform the following steps after vehicle power is restor ed: 1.
T o keep your door operating properly , observe the fol- lowing guidelines: • Always open the door smoothly . • A void high impacts against the door stop when open- ing the door . This is very important when your vehicle is parked on an incline as the door will slide faster in the downhill direction.
There are power sliding side door switches located on the trim panel just in fr ont of the power sliding door for the rear seat passengers and in the overhead console for the driver and passengers. Pressing the switch once will open the power sliding door .
T o avoid unintentional operation of the power sliding doors from the rear seats, press the power sliding door master lock button, located in the overhead console, to disable the switches and handles for the rear seat passen- gers.
The Sliding Side Door Open Flash can be enabled or disabled by performing the following procedur e: 1. Place the Key Fob in the ignition switch. 2. Cycle the ignition switch ON/LOCK five times ending in the ON position (do not start the engine). 3. W ithin 10 seconds of the final cycle, press the HAZ- ARD switch.
Sliding Side Door Child Protection Lock T o provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a Child Protection Door Lock system.
• When the Child Protection Door Lock system is en- gaged, (even if the inside door lock is in the unlocked position) the door can be opened only by using the outside door handle, the RKE transmitter , the switches on the overhead console or the switches located on the trim panel just in front of the power sliding door .
NOTE: • After setting the Child Protection Door Lock system, always test the door fr om the inside to make certain it is in the desired position. • The power sliding side door switches will not open the power sliding doors if the vehicle is in gear or the vehicle speed is above 0 mph (0 km/h).
If the liftgate is locked and is not equipped with the power liftgate feature, pressing the button on the RKE transmitter will result in the liftgate becoming unlocked for 30 seconds allowing you to manually access the liftgate area.
The power liftgate may be closed by pressing the button, located in the upper left trim in the liftgate opening. Pushing once will only close the liftgate.
• There ar e also pinch sensors attached to the side of the liftgate opening. Light pressure anywher e along these strips will cause the liftgate to return to the open position. • The power liftgate must be in the full open or close positions for any of the buttons to operate.
Gas props support the liftgate in the open position. However , because the gas pressur e drops with tempera- ture, it may be necessary to assist the props when opening the liftgate in cold weather .
NOTE: The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have different rates of inflation based on the severity and type of collision. Please pay close attention to the information in this section. It tells you how to use your restraint system properly , to keep you and your passengers as safe as possible.
you under normal conditions. However , in a collision the belt will lock and reduce the risk of you striking the inside of the vehicle or being thrown out. W ARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is near the seatback of the front seats and next to your arm in the rear seats. Grasp the latch plate and pull out the belt.
W ARNING! • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you properly .
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job properly .
Pull the strap down and secure the small latch plate of the lap belt into the small buckle until you hear a “click”. Position the shoulder belt on your chest so that it is comfortable and not r esting on your neck. When the belt is long enough to fit, insert the large latch plate into the buckle until you hear a “click.
As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
Seat Belt Pretensioners — If Equipped The seat belts for both fr ont seating positions may be equipped with pretensioning devices that ar e designed to remove slack fr om the seat belt in the event of a collision. These devices improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision.
This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact.
CAUTION! All occupants, including the driver , should not oper - ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
NOTE: • If you have difficulties or problems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer .
front passenger seat is unoccupied. The BeltAlert 威 warn- ing system may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be restrained in the rear seat in pet harnesses or pet carriers that ar e secured by seat belts and cargo is properly stowed.
NOTE: Although BeltAlert 威 has been deactivated, the Seat Belt Reminder Light will continue to illuminate while the driver’s seat belt remains unbuckled or retracted. Seat Belts and Pregnant Women W e recommend that pregnant women use the seat belts throughout their pregnancy .
Supplemental Restraint System (SRS) - Airbags This vehicle has Advanced Front Airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air- bag is mounted in the center of the steering wheel.
The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have different rates of inflation based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat position.
• Supplemental Seat-Mounted Side Airbags (SAB) • Supplemental Side Airbag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, .
W ARNING! (Continued) • Do not drill, cut or tamper with the knee bolster in any way . • Do not mount any accessories to the knee bolster such as alarm lights, stereos, citizen band radios, etc.
Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags may of fer side-impact and vehicle rollover protection to front and rear seat outboard occupants in addition to that provided by the body structure.
Knee Impact Bolsters The Knee Impact Bolsters help protect the knees of the driver and the front passenger , and position front occu- pants for the best interaction with the Advanced Front Airbags.
If a child fr om 1 to 12 years old (not in a rear facing child seat) must ride in the fr ont passenger seat, move the seat as far back as possible and use the proper child r estraint. (Refer to “Child Restraints”) Y ou should read the instructions provided with your child r estraint to make sure that you ar e using it properly .
W ARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Airbag deployment could cause serious injury , including death. Air- bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Advanced Front Airbags may deploy in crashes with little vehicle front-end damage but that pr oduce a severe initial deceleration. The side airbags will not deploy in all side collisions. Side airbag deployment will depend on the severity and type of collision.
W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the airbag system immediately .
triggered, releasing a quantity of non-toxic gas. The inflating side airbag exits through the seat seam into the space between the occupant and the door .
Enhanced Accident Response System In the event of an impact causing airbag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the follow- ing functions: • Cut off fuel to the engine.
airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or throat irritation, move to fresh air . If the irritation continues, see your doctor .
W ARNING! (Continued) • Do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. T ake your vehicle to an autho- rized dealer for any advanced airbag system ser- vice.
NOTE: If the speedometer , tachometer , or any engine related gauges are not working, the Occupant Restraint Controller (ORC) may also be disabled. The airbags may not be ready to inflate for your protection. Promptly check the fuse block for blown fuses.
In the event that an investigation is undertaken by Chrysler Group LLC (regar dless of initiative), the com- pany or its designated repr esentative will first obtain permission of the appropriate cust.
• Pedal position • And other parameters depending on vehicle configuration Integrated Child Booster Seat — If Equipped The Integrated Child Booster Seat (if equipped) is located in each second-row passenger seat.
W ARNING! Failure to comply with the following conditions could result in serious injury or death: (Continued) W ARNING! (Continued) • The swivel seat should be locked in the forward- facing position when using the booster seat with the vehicle in motion.
5. Once the seat belt is long enough to fit properly , insert the latch plate into the buckle until you hear a “click.” 6. T o remove the slack from the lap belt, pull upward on the shoulder portion of the seat belt. 7. T o release the seat belt, push the red button on the buckle.
T o obtain Integrated Child Seat replacement instruc- tions: Refer to “Publication Or der Forms” in ⬙ If Y ou Need Consumer Assistance ⬙ and specify publication number 81–016–8050 when ordering. Child Restraints Everyone in your vehicle needs to be buckled up all the time, including babies and children.
• Safety experts r ecommend that children ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used rearward-facing: infant carriers and convertible child seats.
W ARNING! Never place any child seat, booster seat, or infant carrier in the Swivel ’n Go seat while it is in the rearward-facing position. The swivel seat should be locked in the forward position when using any child seat, booster seat, or infant carriers, with the vehicle in motion.
• The lap portion should be low on the hips and as snug as possible. • Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle.
Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. Chrysler Gr oup LLC also recommends that you make sur e that you can install the child restraint in the vehicle where you will use it, before you buy it.
• Buckle the child into the seat according to the child restraint manufacturer’s directions. • When your child r estraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Don’t leave it loose in the vehicle.
W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint.
• If your child restraint seat is not LA TCH-compatible, install the restraint using the vehicle seat belts. Installing the Lower Attachments: 1. The vehicle lower anchorages are round bars located at the rear of the seat cushion where it meets the seatback.
Installing the T op T ether Strap (with either Lower Anchors or V ehicle Seat Belt): 1. Route the top tether strap under the adjustable head restraint between the steel posts. 2. Provide enough slack (reference child restraint in- structions) for the tether strap to reach the tether anchor located near the bottom of the seat back.
W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.
T ransporting Pets Airbags deploying in the fr ont seat could harm your pet. An unrestrained pet could be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts.
This vehicle is equipped with a child restraint tether anchor located on the lower rear of the front passenger seat. Use this tether anchor to secure only forward- facing child restraints equipped with an upper tether strap.
• Children mor e than 40 lbs (18 kg) should be secured in the passenger seat in a child restraint or belt- positioning booster seat with the seat adjusted to the rear most position .
W ARNING! The vehicle tether anchor is designed to be used with a child restraint only . It should not be used for any other purpose. Before use, inspect the tether anchor strap for nicks, abrasions, discoloration, and loose threads. If these or any other condition that might affect the performance of the strap is observed, DO NOT USE that strap.
SAFETY TIPS T ransporting Passengers NEVER TRANSPORT P ASSENGERS IN THE CARGO AREA. W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. If you are requir ed to drive with the liftgate open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed.
authorized dealer . If the light stays on, flickers, or comes on while driving, have the system checked by an autho- rized dealer . Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
W ARNING! (Continued) • Check mounting of mats on a regular basis. Al- ways properly reinstall and secure floor mats that have been removed for cleaning. • Always make sure that objects cannot fall into the driver foot well while the vehicle is moving.
Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately .
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors ............................. 1 1 2 ▫ Inside Day/Night Mirror — If Equipped . . . 1 12 ▫ Automatic Dimming Mirror — If Equipped . . 1 13 ▫ Outside Mirrors ....................
䡵 Seats .............................. 1 2 6 ▫ Manual Front And Second Row Seat Adjuster ........................... 1 2 7 ▫ Manual Reclining Seats — If Equipped ..... 1 2 8 ▫ Manual Lumbar Adjust Lever — If Equipped ......................
▫ Headlight Delay — If Equipped .......... 1 6 3 ▫ Daytime Running Lights (Canada/Fleet V ehicles Only) ............ 1 6 4 ▫ Front Fog Lights — If Equipped .......... 1 6 4 ▫ Battery Protection .................... 1 6 4 ▫ Multifunction Lever .
▫ Service Parksense 威 ................... 1 8 3 ▫ Cleaning Parksense 威 .................. 1 8 3 ▫ Parksense 威 System Usage Precautions ...... 1 8 3 䡵 Parkview 威 Rear Back Up Camera — If Equipped .......................... 1 8 6 ▫ T urning Parkview 威 On Or Off — W ith Navigation/Multimedia Radio .
▫ Door T rim Panel Storage ............... 2 0 9 ▫ Driver Seatback Storage — If Equipped .... 2 1 0 ▫ Umbrella Holder ..................... 2 1 0 ▫ Second Row Floor Storage Bins .......... 2 1 1 ▫ Storage Bin Safety W arning ............. 2 1 2 ▫ Center And Rear Overhead Console Storage — If Equipped .
MIRRORS Inside Day/Night Mirror — If Equipped A two-point pivot system allows for horizontal and vertical adjustment of the mirror . Adjust the mirror to center on the view through the rear window . Headlight glare can be reduced by moving the small control under the mirr or to the night position (toward the rear of the vehicle).
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirr or . A light next to the button will illuminate to indicate when the dimming feature is activated.
W ARNING! V ehicles and other objects seen in an outside convex mirror will look smaller and farther away than they really are. Relying too much on side convex mirrors could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in a side convex mirror .
Select a mirror and press one of the four arrows for the direction you want the mirror to move. Driver’s side power mirror preselected positions can be controlled by the optional Driver Memory Seat Feature. Refer to “Driver Memory Seat” in “Understanding the Features of Y our V ehicle” for further information.
when the vehicle is shifted out of REVERSE position. Each stored memory setting will have an associated T ilt Mirrors in Reverse position. NOTE: The T ilt Mirrors in Reverse feature is not en- abled when delivered fr om the factory .
BLIND SPOT MONITORING — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radar- based sensors, located inside the rear bumper fascia, to detect Highway licensable vehicles (automobiles, trucks, motorcycles etc.) that enter the blind spot zones from the rear/fr ont/side of the vehicle.
• The BSM system detection zone DOES NOT change if your vehicle is towing a trailer . Therefore, visually verify the adjacent lane is clear for both your vehicle and trailer before making a lane change.
The BSM system notifies the driver of objects in the detection zones by illuminating the BSM warning light located in the outside mirrors. The BSM system can also be configured to sound an audible (chime) alert and mute the radio to notify the driver of objects that have entered the detection zones.
Entering From The Side V ehicles that move into your adjacent lanes from either side of the vehicle. Entering From The Rear V ehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
Overtaking T raf fic If you pass another vehicle slowly (with a relative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for appr oximately 1.5 seconds, the warning light will be illuminated. If the differ ence in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate.
The BSM system is designed not to issue an alert on stationary objects such as guar drails, posts, walls, foliage, berms, etc. However , occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service.
W ARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals.
NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver . When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including radio muting.
signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded. Whenever a turn signal and detected object are pr esent on the same side at the same time, both the visual and audio alerts will be issued.
VOICE COMMAND — IF EQUIPPED V oice Command can be initiated by pressing the VR button located on the radio or steering wheel controls (if equipped). Refer to “V oice Command” in the Uconnect™ Phone User Manual located on the DVD for further details.
Manual Front And Second Row Seat Adjuster The adjusting bar is located under the front of the seat. Pull the bar upward and move the seat to the desired position. Release the bar to lock the seat into position. Using body pressur e, move forward and rearwar d on the seat to be sure the seat adjusters have latched.
Manual Reclining Seats — If Equipped The recliner control lever is on the outboard side of the seat. T o recline, lean forward slightly , lift the lever , then push back to the desired position and release the lever . Lean forward and lift the lever to r eturn the seatback to its normal position.
Manual Lumbar Adjust Lever — If Equipped The lumbar adjustment lever is located on the outboard side of the seat. T o increase the support, rotate the lever downward. T o decrease the support, rotate the handle upward. W ARNING! Adjusting a seat while the vehicle is moving is dangerous.
Eight–W ay Power Seats — If Equipped The power seat switches are located on the outboard side of the seats. The front switch controls the up/down, forward/r earward and tilt adjustment. The rear switch controls the recline adjustment of the seatback.
Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for front heated seats are located on the center instrument panel area. After turning the ignition ON, you can choose fr om High, Low , or Off heat settings.
W ARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, ex- haustion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time.
T o raise the head restraint, pull upward on the head restraint (on some models, you may need to press the push button). T o lower the head restraint, press the push button, located at the base of the head r estraint, and push downward on the head restraint.
head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. NOTE: • The head r estraints should only be r emoved by quali- fied technicians, for service purposes only . If either of the head restraints requir e removal, see your autho- rized dealer .
• In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Y our V ehicle” for further information.
Stow ’n Go 姞 Seating — If Equipped On vehicles equipped with Stow ’n Go 威 seating, the second and third row seats may be folded into the floor for convenient storage. T o Fold Second Row Seats 1. Move the front seat fully forward. 2. Lower the head restraints and raise the armr ests on the second row seat.
4. Pull up on the seatback recliner lever located on the outboard side of the seat and fold the seatback down. T o assure the seatback is latched in the folded position, additional downward pressure on the seatback may be requir ed when folding.
CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover . W ARNING! In an accident, serious injury could result if the seat storage bin covers are not properly latched.
4. Adjust the head restraint to the desired position, close the storage bin cover and slide the storage bin locking mechanism to the ⬙ Unlocked ⬙ position. Easy Access Seating The second row Stow ’n Go 威 seats can be tilted forward for easy access to the third row seat or rear cargo area.
W ARNING! In the event of a collision you could be injured if the seat is not fully latched. Swivel ’n Go™ Premium Seating — If Equipped Premium second row Swivel ’n Go™ Seating features include: • A table that installs between the second and third row seats.
W ARNING! When the seatback release handle is lifted, the seat- back will rotate forward. T o avoid injury , if you are not seated in the seat, stay clear from the area in the path of the rotating seatback. T o swivel the seat: Pull the lower handle on the outboard side of the seat and push the side of the seatback to begin rotation.
W ARNING! Failure to comply with the following conditions could result in serious injury or even death: • NEVER place any child seat or infant carrier in the Swivel ’n Go™ seat while it is in the rearward facing position.
3. From behind the seat, lift up on the rear of the seat cushion while pulling the seat in a rearwar d direction. 4. Remove the seat from vehicle through the liftgate. Rollers ar e part of the seat frame and will ease the removal process. 5. Lower the release handle located at the bottom front edge of the seat.
Swivel ’n Go™ Premium Seating T able — If Equipped The Swivel ’n Go™ Seating T able consists of an easily assembled post and top. The table and leg are stored beneath the floor when not in use. T o install the table follow these steps: 1. Open the floor storage cover in front of the second row seats.
4. Insert pole into base by aligning the lock button into notch of the base. 5. T wist the pole in a clockwise rotation until it stops. NOTE: Y ou will hear an audible “click” when the lock button engages the base. 6. Place the table top over the installed pole aligning with the mating feature of the underside of the table top.
W ARNING! Failure to comply with the following conditions could result in serious injury or even death: • DO NOT install the table while vehicle is in motion. • NEVER drive the vehicle with only the pole in- stalled. • DO NOT place heavy or sharp objects on table.
2. Pull horizontally on the latch to activate the release from the pole. 3. While pulling on the latch, pull upward to remove the table top from the pole. NOTE: The table top should be removed from the leg prior to removing the leg from its mounting base.
Second Row Bench Seat — If Equipped While the bench seat does not stow in the floor , it is removable for added cargo space. Release levers are located on the rear leg assemblies, near the floor . T o remove the seat, squeeze each release handle and rotate downwards to deploy the wheels.
W ARNING! If not properly latched, the bench seats could become loose. Personal injuries could result. After reinstall- ing these seats, be sure the red indicator button on the release handles return into the handles.
The switch is only functional when the liftgate is open and the vehicle is in P ARK. The r ear switch bank allows multiple power folding and unfolding positions for the third row seats. Left and right third r ow seats can be folded individually or together .
NOTE: • Disconnect the center shoulder belt from the small buckle and lower the head r estraints befor e attempting to fold/stow the power third row seats. • T o abort seat operation while seat is in motion, press a differ ent seat position selector switch to stop the seat.
T o Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 2. Pull release strap marked “1” to unlock the recliner . 3. Pulling strap “3” releases the seatback to return to its full upright position.
W ARNING! T o avoid serious injury or death, NEVER operate the vehicle with occupants in the third row seat while in the tailgate mode. DRIVER MEMORY SEA T — IF EQUIPPED The Memory Buttons 1 and 2 o.
Setting Memory Positions and Linking RKE T ransmitter to Memory NOTE: Each time the SET (S) button and a numbered button (1 or 2) is pr essed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key and turn the ignition switch to the ON position.
1 1. Select ⬙ Remote Linked to Memory ⬙ in the Electronic V ehicle Information Center (EVIC) and enter “Y es”. Refer to “Electronic V ehicle Information Center (EVIC)/ Customer-Pr ogrammable Features” in “Understanding Y our Instrument Panel” for further information.
3. Press and release the memory SET (S) button located on the driver’s door . A chime will sound signaling that you are in the memory set mode. 4. W ithin five seconds, press and release MEMORY button 1 on the driver’s door . A chime will sound signaling to you that the driver memory has been set.
• When you r emove the key from the ignition switch the driver seat will move to a position 0.3 in (7.7 mm) forward of the rear stop if the driver seat position is between 0.
TO OPEN AND CLOSE THE HOOD T o open the hood, two latches must be released. 1. Pull the hood release lever located on the instrument panel, below the steering column. 2. Move to the front of the vehicle and look inside the center of the hood opening. Locate, then push the safety catch lever to the right, while raising the hood at the same time.
CAUTION! T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 12 in (30 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
Interior Lighting Interior lights are turned on when a door or liftgate is opened, the Remote Keyless Entry (RKE) transmitter is activated, or when the dimmer control is moved to the extreme top.
Parade Mode (Daytime Brightness Feature) Rotate the dimmer control to the first detent. This feature brightens the odometer , radio and overhead dis- plays when the parking lights or head- lights are on.
T o change the brightness of the instrument panel lights, rotate the dimmer control up or down. Automatic Headlights — If Equipped This system automatically turns your headlights on or off based on ambient light levels.
Headlights On With Wipers — If Equipped When your headlights are in the Automatic mode and the engine is running, the headlights will automatically turn on when the wiper system is also turned on. Headlights on when windshield wipers are on may be found on vehicles equipped with an automatic headlight system.
Daytime Running Lights (Canada/Fleet V ehicles Only) The headlights on your vehicle will illuminate when the engine is started and the transmission is in any gear except P ARK. This provides a constant lights on condi- tion until the ignition is turned OFF .
Multifunction Lever The multifunction lever is located on the left side of the steering column. The multifunction lever controls the: • T urn Signals • Headlight Beams Low/High • Flash-T o-Pass .
Lane Change Assist T ap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. T urn Signal W arning If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for approximately 1 mile (1.
2. Rotate the headlight switch counterclockwise to the AUTO (A) position. 3. Push the multifunction lever away fr om you to switch the headlights to the high beam position. Refer to “Mul- tifunction Lever” in this section for further information. NOTE: This system will not activate until the vehicle is at, or above, 25 mph (40 km/h).
NOTE: Always remove any buildup of snow that pre- vents the windshield wiper blades from returning to the off position. If the windshield wiper switch is turned off and the blades cannot r eturn to the off position, damage to the wiper motor may occur .
2. Intermittent, Low and High Speed Wipers Use the intermittent wipers when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Rotate the end of the multifunc- tion lever to the first detent position, then turn the end of the multifunction lever to select the desired delay inter- val.
Rain Sensing Wipers — If Equipped This feature senses moisture on the windshield and automatically activates the wipers for the driver . This feature is especially useful for road splash or overspray from the windshield washers of the vehicle ahead.
The Rain Sensing system has protective features for the wiper blades and arms. It will not operate under the following conditions: • Low T emperature Wipe Inhibit — The Rain Sensing feature will n.
T o tilt the column, push the lever downward to the unlocked position. Move the steering column up or down, as desired. Pull the lever upward to the locked position to lock the steering column firmly in place. W ARNING! Do not adjust the steering column while driving.
Press the button forward to move the pedals forward (toward the front of the vehicle). Press the button rearward to move the pedals rearwar d (toward the driver). • The pedals can be adjusted with the ignition OFF . • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control Sys- tem is on.
W ARNING! Do not adjust the pedals while the vehicle is moving. Y ou could lose control and have an accident. Always adjust the pedals while the vehicle is parked. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, Electronic Speed Control takes over the accelerator operation at speeds greater than 25 mph (40 km/h).
System can be reactivated by pushing the Electronic Speed Control ON/OFF button and r esetting the desired vehicle set speed. T o Activate Push the ON/OFF button (located in the end of the lever) once.
Deactivating Electronic Speed Control A soft tap on the brake pedal or pulling the Electronic Speed Control lever (CANCEL) toward you will deacti- vate the Electr onic Speed Control without erasing the set speed memory . Pushing the ON/OFF button to the OFF position or turning OFF the ignition erases the set speed memory .
Accelerating T o Pass Press the accelerator as you normally would. When the pedal is released, the vehicle will return to the set speed. NOTE: The Electronic Speed Control system maintains speed up and down hills. A slight speed change on moderate hills is normal.
ParkSense 威 will remember the last system state (enabled or disabled) fr om the last ignition cycle when the ignition is changed to the RUN/ON position.
The ParkSense 威 W arning Display is located in the Instru- ment cluster ’s EVIC display . It provides both visual and audible warnings to indicate the distance between the rear fascia/bumper and the detected obstacle. ParkSense 姞 Display When the vehicle is in REVERSE, the warning display will turn ON indicating the system status.
The system will indicate a detected obstacle by showing three solid arcs and will produce a 1 ⁄ 2 second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow , to fast, to continuous.
The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning display operation when the system is detecting an .
W ARNING DISPLA Y DIST ANCES DISPLA Y MESSAGE OBST ACLE DIST ANCE FROM: ARC’s AUDIBLE SIGNAL REAR CORNERS REAR CENTER Park Assist ON None None W arning Object Detected 78.7 in (200 cm) 3 Solid Y es, 1/2 second W arning Object Detected 39.3 in (100 cm) 3 Flashing Slow T one W arning Object Detected 27.
refer to “Electronic V ehicle Information Center (EVIC)” in “Understanding Y our Instrument Panel” for further in- formation. When the shift lever is moved to REVERSE and the system is disabled, the EVIC will display the “P ARK ASSIST DISABLED” message for as long as the vehicle is in REVERSE.
• When you turn ParkSense 威 of f, the instrument cluster will display “P ARK ASSIST DISABLED.” Further- more, once you turn ParkSense 威 off, it remains off until you turn it on again, even if you cycle the ignition key .
CAUTION! • ParkSense 威 is only a parking aid and it is unable to recognize every obstacle, including small ob- stacles. Parking curbs might be temporarily de- tected or not detected at all. Obstacles located above or below the ParkSense 威 sensors will not be detected when they are in close proximity .
W ARNING! (Continued) • Before using the ParkSense 威 Rear Park Assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the vehicle when the vehicle is not used for towing.
W ARNING! Drivers must be careful when backing up even when using the ParkV iew 威 Rear Back Up Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, ob- structions, or blind spots before backing up.
T urning ParkView 姞 On or Off — With Navigation/Multimedia Radio 1. Press the “menu” hard key . 2. Select ⬙ system setup ⬙ soft key . 3. Press the “camera setup” soft key . 4. Enable or disable the rear camera feature by selecting “enable rear camera in reverse” soft key .
OVERHEAD CONSOLES Front Overhead Console T wo versions of the overhead console are available. The base front overhead console model featured fixed incan- descent courtesy/r eading lights, flip-down sunglass stor- age and conversation mirror .
when a front door , a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed. The courtesy lights also function as reading lights.
Rear Courtesy/Reading Lights — If Equipped The overhead console has two sets of courtesy lights. The lights turn on when a front door , a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed.
Rear Console Halo Lighting The rear overhead console has recessed halo lighting around the perimeter of the console base. This feature provides additional lighting options while traveling and is controlled by the headlight switch.
W ARNING! • Y our motorized door or gate will open and close while you are training the universal transceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards.
Place the handheld transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink 威 button you wish to pr ogram while keeping the indicator light in view .
This can usually be found where the hanging antenna wire is attached to the garage door opener motor . It is NOT the button normally used to open and close the door . 6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer .
Using HomeLink 威 T o operate, pr ess and release the programmed HomeLink 威 button. Activation will now occur for the trained device (i.e., garage door opener , gate operator , security system, entry door lock, home/office lighting, etc.,). The handheld transmitter of the device may also be used at any time.
successfully accepted the frequency signal. The indica- tor light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Programming HomeLink 威 ,” earlier in this section.
2. This device must accept any interference that may be received including interference that may cause undesir ed operation. NOTE: • The transmitter has been tested and it complies with FCC and IC rules.
Closing the Sunroof Manually T o close the sunr oof fr om an open or vent position, press and hold the switch forwar d. The sunroof will close fully and stop automatically . Release the switch to stop sun- roof travel at any point. Sunroof Sunshade Operation The sunroof sunshade can be opened manually .
Express Close Press the switch forward and release, and the sunroof will close automatically from any position. The sunroof will close fully , then stop automatically . This is called “Express Close”. During Express Close operation, any movement of the sunroof switch will stop the sunroof.
with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window . Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. ELECTRICAL POWER OUTLETS — IF EQUIPPED T wo 12 V olt (13 Amp) power outlets are located on the lower instrument panel, next to the open storage bin.
One outlet in the removable floor console shares a fuse with the lower outlet in the instrument panel and is also connected to the battery . Do not exceed a maximum power of 160 W atts (13 Amps) shared between the lower panel outlet and the removable floor console outlet.
CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
The power inverter is designed with built-in overload protection. If the power rating of 150 W atts is exceeded, the power inverter will automatically shut down. Once the electrical device has been r emoved fr om the outlet the inverter should automatically reset.
T o turn on the power outlet, pr ess the switch once. Pr ess the switch a second time to turn the power outlet off. CUPHOLDERS There are nine cupholders in the interior . T wo cupholders in the center front instrument panel, four in the floor consoles and three more are located in the third row quarter trim panel.
Instrument Panel Cupholders The instrument panel cupholders are located in a pull-out drawer just above the lower storage bin. Pull the drawer out firmly until it stops, and place the container to be held in either one of the cupholder wells. The cupholders are designed to accommodate a wide variety of container types and sizes.
T wo outboard mesh pockets are on intermediate seating. The mesh pockets ar e flexible enough to hold juice boxes, toys, games or MP3 players, etc. Smoker’s Package Kit — If Equipped W ith the opt.
T o close the compartment door , push firmly downward on the door’s surface to release the detent and latch the door closed. Lower Glove Compartment T o open the lower compartment, pull out on the release handle (3). The lower compartment handle is also equipped with a lock (3).
Door T rim Panel Storage Front Door Storage Both interior fr ont door panels have multiple pockets for storage. W ARNING! If containers of hot liquid are placed in the bottle holder , they can spill when the door is closed, burn- ing the occupants. Be careful when closing the doors to avoid injury .
Driver Seatback Storage — If Equipped The drivers seatback has a primary storage pocket on all models and an optional secondary mesh pocket. Umbrella Holder An umbrella holder has been conveniently molded into the left front door entry scuff molding.
Second Row Floor Storage Bins The area below the floor covers, located in front of the second row seats, is available for storage. Pull up on the storage bin latch to open the cover . Slide the storage bin locking mechanism to the ⬙ unlocked ⬙ position to allow greater access to the storage bin.
Storage Bin Safety Warning Carefully follow these warnings to help prevent personal injury or damage to your vehicle: W ARNING! • Always close the storage bin covers when your vehicle is unattended. • Do not allow children to have access to the second row seat storage bins.
Seat Storage Bin Cover Emergency Release Lever As a security measure, your vehicle may be built with a Storage Bin Cover Emergency Release is built into the storage bin cover latching mechanism.
Coat Hooks Coat hooks ar e located along the headliner for the second and third row seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the r ecommended load limit can cause the coat hooks to break or disengage from the vehicle.
NOTE: W ith all rear seats stowed or removed ,4x8 foot sheets of building material will fit on the vehicle floor with the liftgate closed. The front seats must be moved slightly forward of the rearmost position. CONSOLE FEA TURES There are two consoles available: Basic and Premium.
3. Remove the console. T o Reinstall The Basic Floor Console 1. Position the console at a slight angle (front slightly higher than the rear). 2. Slide the console rearward into the floor bracket/ hook. 3. Align the console until the fr ont anchor cup plug hole is centered on the winch hole.
• Large console center storage will store headphones for the available r ear DVD entertainment system or other items • 12 V olt DC power outlet provides continuous power inside the console for cell phones or other electronics. • Rear occupant accessible • Multiple adjustments • Removable from vehicle for additional floor space.
holder insert for both cavities can easily be removed for cleaning. The cupholders will also accommodate large size cups and 20 oz (.6 L) bottles. Position 1 shows the console closed with four cupholders and a convenient storage tray . Position 2 shows the raised storage tray revealing a lar ge storage area below .
easy access to the storage ar ea below and pr ovides two of the four cupholders for the second row passengers. Position 4 shows the complete console in its r earmost position. Again, lifting second latch handle at the front of the console, allows complete access to a lower storage bin and pr ovides additional cupholders for r ear passengers.
3. Pull rearwar d to disengage from floor and remove console. T o reinstall the console: 1. Position the console at a slight angle (rear slightly higher than the front). 2. Slide the console forward into the floor bracket. 3. Rotate the rear of the console down until it is resting on the floor bracket.
NOTE: • Y ou can turn off the heated mirror feature at anytime by pr essing the rear window defroster switch a second time. • T o prevent excessive battery drain, use the rear win- dow defroster only when the engine is operating.
ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and side rails are designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. Distribute car go weight evenly on the r oof rack crossbars.
NOTE: T o help control wind noise when installing the crossbars ensure the embossed arrow is facing the front of the vehicle. When the cr ossbars ar e not in use, the front crossbar should be fastened just forward of the middle support and the rear crossbar should be fastened at the rearmost position of the side rails.
W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack.
Gently pull up on the tab to raise the sun screen. Continue pulling the sun screen until the tab is near the top of the window . Once the screen is completely to the top of the window , extend the top bar of the sun screen over the two hooks attached to the top of the window .
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Features ............... 2 3 1 䡵 Instrument Cluster .................... 2 3 2 䡵 Instrument Cluster Descriptions ........... 2 3 3 䡵 Compass Mini-T rip Computer (CMTC) — If Equipped .
▫ Operating Instructions — V oice Command System (VR) — If Equipped ............. 2 6 3 ▫ Operating Instructions — Uconnect™ Phone — If Equipped ...................... 2 6 3 ▫ Clock Setting Procedur e — RBZ Radio ..... 2 6 3 ▫ Clock Setting Procedur e — RER Radio .
▫ Play Mode ......................... 2 9 0 ▫ List Or Browse Mode ................. 2 9 2 䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/RER/RBZ/RES Radios Only) ............................... 2 9 4 ▫ System Activation ......
▫ Three-Zone T emperature Control — If Equipped ........................ 3 0 7 ▫ Rear Manual Climate Control — If Equipped ........................ 3 0 9 ▫ Automatic T emperature Control (A TC) — If Equipped ........................ 3 1 2 ▫ Summer Operation .
INSTRUMENT P ANEL FEA TURES 1 — Air V ents 5 — Analog Clock 9 — DVD – If Equipped 13 — Switch Bank 2 — Instrument Cluster 6 — Upper Glove Compartment 10 — Cup Holders 14 — Ignition S.
INSTRUMENT CLUSTER 232 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Low Fuel Light When the fuel level reaches approximately 2.0 gal (7.8 L) this light will turn on, and remain on until fuel is added.
vehicle is experiencing a problem with the charging system. Obtain SER VICE IMMEDIA TEL Y . See an autho- rized dealer . If jump starting is required, r efer to “Jump Starting Procedur es” in “What T o Do In Emergencies”.
system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subse- quent vehicle start-ups as long as the malfunction exists.
6. Oil Pressur e W arning Light This light indicates low engine oil pressur e. The light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on.
10. Electronic Stability Program (ESP) Indicator Light / Brake Assist System (BAS) W arning Light The malfunction light for the Electronic Stabil- ity Program (ESP) is combined with Brake Assist System (BAS). The yellow “ESP/BAS W arning Light” comes on when the ignition switch is turned to the “ON” position.
If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir , it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Program (ESP) sys- tem.
Operation of the Brake W arning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should illuminate for approxi- mately two seconds. The light should then turn of f unless the parking brake is applied or a brake fault is detected.
14. Electronic Stability Program (ESP) Indicator Light / T raction Control System (TCS) Indicator Light If this indicator light flashes during accelera- tion, apply as little throttle as possible.
the ON position, before engine start. If the bulb does not come on when turning the key fr om OFF to ON, have the condition checked promptly . Certain conditions such as a loose or missing gas cap, poor fuel quality , etc., may illuminate the MIL after engine start.
21. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. Any reading within the normal range indicates that the engine cooling system is operating satisfactorily . The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer .
NOTE: On the Base cluster , the reset button toggles between odometer , T rip A, T rip B, ECO and outside temperature. T o reset a message display on Base Cluster (gA TE, gASCAP , noFUSE, CHangE OIL, LoCOOL, Lo- W ASH, etc.), push and hold the button until the display resets (approximately two seconds).
ECO / ECO-on (Fuel Saver Indicator) — If Equipped The ECO-on indicator will illuminate when you are driving in a fuel efficient manner and can be used to modify driving habits in order to incr ease fuel economy . The ECO display will toggle between ECO and ECO-on depending on driving habits and vehicle usage.
means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. T o turn off the message temporarily , press and release the T rip / Odometer Display reset button on the instrument cluster .
26. Compass Mini-T rip Computer (CMTC) or Electronic V ehicle Information Center (EVIC) Display — If Equipped Compass Mini-T rip Computer (CMTC) Display — If Equipped On vehicles equipped with Com.
COMP ASS MINI-TRIP COMPUTER (CMTC) — IF EQUIPPED NOTE: • The compass on your vehicle is self-calibrating, elimi- nating the need to manually calibrate the compass.
When the appropriate conditions exist, the following messages will display: NE ....... Eight-point compass headings are displayed (N, S, E, W , NE, NW , SE, SW) 14°F ............ T emperatur e (Fahr enheit or Celsius) AV G ......... A v e r a g e Fuel Economy (U.
Compass/T emperature Display Compass V ariance Compass V ariance is the difference between Magnetic North and Geographic North. T o ensure compass accu- racy , the compass variance should be pr operly set accor d- ing to the variance map for the zone where the vehicle will be driven.
T o Set the V ariance Start the engine and leave the transmission gear selector lever in the P ARK position. Press and hold the CMTC reset button (for approximately ten seconds) until the current variance zone number is displayed. T o change the zone, pr ess and release the CMTC reset button to incr ease the variance one step.
This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel. The EVIC consists of the following: • System Status displ.
Press and release the MENU button, and the mode displayed will change between Compass/T emperatur e, T rip, System Status, and Personal Settings. Press the STEP button to scroll through sub menus (i.e., T rip Functions, A vg. Fuel Economy , DTE, Elapsed T ime, and Units).
• LOW W ASHER FLUID • Oil Change Required • Check Gascap • Left Front T urn Signal Light Out • Left Rear T urn Signal Light Out • Right Front T urn Signal Light Out • Right Rear T urn Si.
Oil Change Required Y our vehicle is equipped with an engine oil change indicator system. The Oil Change Required message will flash in the EVIC display for approximately 10 seconds, after a single chime has sounded, to indicate the next scheduled oil change interval.
“RESET” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset. Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank.
Compass Display / ECO (Fuel Saver Mode) — If Equipped The compass readings indicate the direction the vehicle is facing. Press and release the compass button to display one of eight com- pass readings, and the outside temperature.
2. Press the MENU button until Personal Settings (Customer-Pr ogrammable Features) menu is reached. 3. Press the STEP button until “Calibrate Compass” is displayed in the EVIC. 4. Press and release the RESET button to start the calibra- tion. The “CAL” indicator will be displayed in the EVIC.
2. Press and hold the compass button for appr oximately two seconds. 3. Press the STEP button until “Compass V ariance” mes- sage, and the last variance zone number , displays in the EVIC. 4. Press and release the STEP button until the proper variance zone is selected, according to the map.
Auto UNLK On Exit When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the P ARK or NEUTRAL position and the driver’s door is opened. T o make your selection, press and release the RESET button until ON or OFF appears.
Headlamp Off Delay When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. T o make your selection, press and release the RESET button until 0, 30, 60, or 90 appears.
unlocked with the RKE transmitter . T o make your selec- tion, press and release the RESET button until “OFF ,” “30 sec.,” “60 sec.,” or “90 sec.
Display Units of Measure In The EVIC, odometer , and navigation system (if equipped) can be changed between English and Metric units of measure. T o make your selection, press and release the RESET button until ENGLISH or METRIC appears.
Rain Sensing Intermittent Wipers — If Equipped When ON is selected, the system will automatically activate the windshield wipers if it senses moisture on the windshield. T o make your selection, press and release the RESET button until “ON” or “OFF” appears.
2. T ouch the screen where the time is displayed, the clock setting menu will appear on the screen. 3. T o move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is dis- played. T o move the hour backward, touch the screen where the word “Hour” with the arrow pointing down- ward is displayed.
2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Show T ime if Radio is Off.” T ouch the screen where the words “Show T ime if Radio is Off” are displayed to change the current setting.
4. T o move the hour forward, touch the screen where the word “Hour” with the arrow pointing upward is dis- played. T o move the hour backward, touch the screen where the word “Hour” with the arrow pointing down- ward is displayed.
T ouch the screen where the words “Show T ime if Radio is Off” are displayed to change the current setting. Changing the T ime Zone 1. T urn on the radio. 2. T ouch the screen where the time is displayed. 3. T ouch the screen where “User Clock” is displayed, the clock setting menu will appear on the screen.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save time change. 5. T o exit, press any button/knob, or wait five seconds. R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows.
Push the rotary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. AM/FM Button Press the buttons to select either AM or FM mode. SET/RND Button — T o Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory , press the SET/RND button.
Operation Instructions — CD MODE For CD And MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (C.
EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF .
SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track.
• Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ⬙ . ⬙ and a three- character extension) Multisession disc formats are supported by the radio.
MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags.
Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the sour ce and play through the vehicle speakers.
Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
Phone Button Uconnect™ Phone — If Equipped Press this button to operate the Uconnect™ Phone feature (if equipped). Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast from an FM station (FM mode only). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows.
Push the rotary TUNE/SCROLL control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pr essing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected.
Program T ype 16-Digit Character Display Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next fr equency station with the same selected Music T ype name.
window . Select the button (1–6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not be stored into pushbutton memory .
Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than 1.
NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the right SEEK button for the next selection on the CD.
Supported Media (Disc T ypes) The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to r ecognize the file as an invalid MP3 and will not play the file.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Press and hold the INFO button again for three seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows .
UNIVERSAL CONSUMER INTERF ACE (UCI) 0.5 — IF EQUIPPED NOTE: This section is for sales code RES and REQ/ REL/RET radios only with Uconnect™. For sales code RER, RBZ, REN, REP , REW , RB2 or REZ touch-screen radio UCI feature, refer to the separate RER, REN, RBZ, RB2 or REZ User’s Manual.
NOTE: • It may be necessary to remove the connector pin protection cap from the 16–pin connector port, prior to connecting the cable. • If the iPod 威 battery is completely discharged, it may not communicate with the UCI system until a mini- mum char ge is attained.
jump to the previous track in the list. T urning this button at any other time in the track, will jump to the beginning of the current track. • Jump backward in the curr ent track by pressing and holding the << RW button. Holding the << RW button long enough will jump to the beginning of the current track.
• RND button (available on sales code RES radio only): Pressing this button toggles between Shuffle ON and Shuffle OFF modes for the iPod 威 .I ft h e RND icon is showing on the radio display , then the shuffle mode is ON. List Or Browse Mode During Play mode, pressing any of the buttons described below , will bring up List mode.
• Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • T o Exit List mode without selecting a track, pr ess the same PRESET button again to go back to Play mode . • LIST button: The LIST button will display the top level menu of the iPod 威 .
Uconnect™ Multimedia (SA TELLITE RADIO) — IF EQUIPPED (REN/RER/RBZ/RES RADIOS ONL Y) Satellite radio uses direct satellite-to-receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio.
Sirius ID number will display . The Sirius ID number display will time out in two minutes. Pr ess any button on the radio to exit this screen. ESN/SID Access With REN/RER/RBZ Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch scr een.
Operating Instructions - Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down.
MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pr essing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. T oggle the MUSIC TYPE button again to select the music type.
pushbutton memory . The channels stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations).
• Additional single-disc DVD player with two-screen system • Battery-powered two-channel remote control • T wo remote headphones • Integrated remote storage in either screen location • Three.
NOTE: Refer to the “Uconnect™ Multimedia” section of Uconnect™ User Manual located on the DVD for further details. REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls ar e located on the rear surface of the steering wheel, at the three and nine o’clock positions.
The right-hand r ocker switch has a pushbutton in the center , and controls the volume and mode of the sound system. Pr essing the top of the rocker switch will incr ease the volume.
CD/DVD DISC MAINTENANCE T o keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch- ing the disc.
CLIMA TE CONTROLS The Climate Control System allows you to regulate the temperature, amount, and direction of air circulating throughout the vehicle. The controls are located on the instrument panel, below the radio.
Front Blower Control There are four blower speeds. Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the off position.
Mode Control (Air Direction) Mode control allows you to choose from several selections of air distribu- tion. Y ou can select either a primary mode, as identified by the symbols, or a blend of two of these modes. The closer the control is to a particular mode, the more air distribution you receive from that mode.
Defrost Mode Air is directed through the windshield and side window demist outlets. Use DEFROST mode with maximum blower and temperature settings for best windshield and side window defrosting. NOTE: The air conditioning compressor operates in MIX and DEFROST , or a blend of these modes even if the A/C button is not pressed.
Economy Mode If ECONOMY mode is desired, press the A/C button to turn off the indicator light and the A/C compressor . Rotate the temperature control knob to the desired temperature. Air Conditioning Operation Push on this button to engage the Air Conditioning (A/C).
The Three-Zone T emperature Control bottom panel con- trols rear Heating, V entilation, and Air Conditioning operations. Front Upper Three Zone T emperature Control 1 – Left T emperature 7 – Right.
The primary control for the rear blower is on the front climate control unit located on the instrument panel. When the front contr ol is in any position other than r ear , the front control operates all the rear functions. The Three-Zone T emperature Control bottom panel has five positions; off, rear , and a range of blower speeds.
The rear blower and temperature controls for the rear seat passengers are located in the headliner , near the center of the vehicle. Rear Blower Control The primary control for the rear blower is on the front climate control unit, located on the instrument panel.
CAUTION! Interior air enters the Rear Manual Climate Control system through an intake grille, located in the right side trim panel behind the third row seats. The heater outlets are located in the right side trim panel, just behind the sliding door . Do not block or place objects directly in front of the inlet grille or heater outlets.
Floor Mode Air comes from the floor outlets. Automatic T emperature Control (A TC) — If Equipped • Front Three-Zone A TC allows both driver and front passenger seat occupant, and rear seat occupants to select individual comfort settings.
Front Upper A TC Panel 1 - System On/Off 9 - Air Conditioning (A/C) On/ Off 2 - Blower Indicator 10 - AUTO Mode / Blower 3 - Left Front T emperature 1 1 - Front MODE 4 - Rear Blower / T emperature / M.
Automatic Operation 1. Press the AUTO button on the Front Upper A TC Panel and the word AUTO will illuminate in the front A TC display , along with three temperatures for driver , front passenger , and rear seats. The system will then automati- cally regulate the amount of airflow .
Manual Operation This system of fers a full complement of manual override features. The AUTO symbol in the front A TC display will be turned off when the system is being used in the manual mode. NOTE: Each of these features operate independently from each other .
Floor Mode Air comes from the floor outlets. A slight amount of air is dir ected through the defr ost and side window demister outlets. Mix Mode Air comes fr om the floor , defr ost and side window demist outlets. This mode works best in cold or snowy conditions.
Recirculation Control When outside air contains smoke, odors, or high humidity , or if rapid cooling is desired, you may wish to recir culate interior air by pressing the RECIRCULA TION mode control button. RECIRCULA TION mode should only be used temporarily .
The Rear A TC System is located in the headliner , near the center of the vehicle. 1. Press the REAR LOCK button on the fr ont lower A TC panel. This turns off the REAR LOCK icon in the rear temperature knob. 2. Rotate the Rear Blower , Rear T emperatur e and the Rear Mode Control knobs to suit your comfort needs.
NOTE: • It is not necessary to move the temperatur e settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to provide comfort as quickly as possible. • The temperature can be displayed in English or Metric units by selecting the “Display Units of Measure in” customer-pr ogrammable feature.
When rear controls are locked by the front system, the LOCK symbol on the temperature knob is illuminated and any rear overhead adjustments are ignored. Rear Mode Control Auto Mode The rear system automatically maintains the correct mode and comfort level desired by the rear seat occu- pants.
Winter Operation T o ensure the best possible heater and defroster perfor- mance, make sure the engine cooling system is function- ing properly and the proper amount, type, and concen- tration of coolant is used. Refer to “Maintenance Procedur es” in “Maintaining Y our V ehicle” for proper coolant selection.
Operating Tips A/C Air Filter— If Equipped On vehicles equipped with Automatic T emperatur e Con- trol (A TC), the climate control system filters out dust and pollen from the air . Refer to “Air Conditioning” in “Maintaining Y our V ehicle” for filter replacement instructions.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedures .................... 3 2 7 ▫ Automatic T ransmission ............... 3 2 7 ▫ Normal Starting ..................... 3 2 7 ▫ Extreme Cold W eather (Below ⫺ 20°F Or –29°C) ............
䡵 Driving Through W ater ................. 3 3 9 ▫ Flowing/Rising W ater ................. 3 3 9 ▫ Shallow Standing W ater ............... 3 3 9 䡵 Power Steering ....................... 3 4 1 ▫ Power Steering Fluid Check ............. 3 4 2 䡵 Parking Brake .
▫ Life Of T ire ........................ 3 6 7 ▫ Replacement T ires .................... 3 6 7 䡵 Snow T ires .......................... 3 6 8 䡵 T ire Rotation Recommendations ........... 3 6 9 䡵 T ire Pressur e Monitor System (TPMS) ....... 3 7 0 ▫ Base System .
▫ Maintenance ........................ 3 8 7 䡵 Adding Fuel ......................... 3 8 7 ▫ Fuel Filler Cap (Gas Cap) .............. 3 8 7 ▫ Loose Fuel Filler Cap Message ........... 3 8 9 䡵 V ehicle Loading ...................... 3 8 9 ▫ V ehicle Certification Label .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. W ARNING! Never leave unattended children alone in a vehicle.
Extreme Cold Weather (Below ⫺ 20°F or –29°C) Follow the same instructions in the “Normal Starting” procedur e. T o ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (avail- able from your authorized dealer) is recommended.
CAUTION! T o prevent damage to the starter , DO NOT crank the engine for more than 15–second intervals at one time. W ait 10 to 15 seconds before trying again. If the engine has been flooded, it may start to run, but not have enough power to continue running when the key fob is released.
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Move the shift lever into P ARK only after the vehicle has come to a complete stop. • Do not move the shift lever from REVERSE, P ARK, or NEUTRAL into any forward gear when the engine is above idle speed.
Brake/T ransmission Interlock System This vehicle is equipped with a Brake T ransmission Shift Interlock System (BTSI) that holds the shift lever in the P ARK position when the ignition switch is in the LOCK position.
The electr onically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers).
When parking on a hill, it is important to set the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK. As an added precaution, turn the front wheels toward the curb on a downhill grade, and away fr om the curb on an uphill grade.
W ARNING! (Continued) • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the key fob in the ignition switch.
NEUTRAL This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. W ARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill.
CAUTION! If the transmission operating temperature exceeds acceptable limits, the vehicle computer will override DRIVE and select “5” range (on six-speed transmis- sions) or “3” range (on four-speed transmissions) by changing shift points. This is done to prevent trans- mission damage due to overheating.
Odometer Screen Dis- play 1234 5 6 D Actual Gear(s) Allowed (Six- Speed T rans- mission) 1 1-2 1-3 1-4 1-5 1-6 1-6 Actual Gear(s) Allowed (Four-Speed T ransmission) 1 1-2 1-3 1-4 N/A N/A 1–4 NOTE: T o select the proper gear position for maximum deceleration (engine braking), simply pr ess and hold the shift lever to the left (-).
NOTE: Even if the transmission can be reset, it is recommended that you visit an authorized dealer at your earliest possible convenience. If the transmission cannot be reset, authorized dealer service is required.
2. Slow down if the r oad has standing water or puddles. 3. Replace the tires when tread wear indicators first become visible. 4. Keep the tires properly inflated. 5. Maintain sufficient distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop.
CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle.
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances.
• Upon initial start-up in cold weather , the power steer- ing pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be considered normal, and it does not in any way damage the steering system.
W ARNING! Fluid level should be checked on a level surface and with the engine off to prevent injury from moving parts and to ensure accurate fluid level reading. Do not overfill. Use only manufacturer’s recommended power steering fluid. If necessary , add fluid to restore to the proper indicated level.
When the parking brake is applied with the ignition switch in the ON position, the “Brake W arning Light” in the instrument cluster will illuminate. NOTE: • When the parking brake is applied and the automatic transmission is placed in gear , the “Brake W arning Light” will flash.
W ARNING! (Continued) • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury . Also be certain to leave the transmission in P ARK. Failure to do so may allow the vehicle to roll and cause damage or injury .
W ARNING! • The Anti-Lock Brake System contains sophisti- cated electronic equipment that may be suscep- tible to interference caused by improperly in- stalled, or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability .
Anti-Lock Brake Warning Light The “Anti-Lock Brake W arning Light” moni- tors the anti-lock brake system. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
wheel(s) and engine power is reduced, to provide en- hanced acceleration and stability . A feature of the TCS functions similarly to a limited-slip differ ential, and controls the wheel spin acr oss a driven axle. If one wheel on a driven axle is spinning faster than the other , the system will apply the brake of the spinning wheel.
Brake Assist System (BAS) The Brake Assist System (BAS) is designed to optimize the vehicle’s braking capability during emergency brak- ing maneuvers. The system detects an emergency brak- ing situation by sensing the rate and amount of brake application, and then applies optimum pressure to the brakes.
Electronic Stability Program (ESP) The Electronic Stability Program (ESP) enhances direc- tional control and stability of the vehicle under various driving conditions. ESP corr ects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the over/under steer condition.
than ESP would normally allow is required to gain traction. T o turn ESP on again, momentarily press the “ESP OFF” switch. This will restor e the normal “ESP On” mode of operation.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards.
T ires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- tion. Example: T145/80D18 103M. • High flotation tire sizing is based on U.S. design standards and it begins with the tir e diameter molded into the sidewall.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can ca.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof.
Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tell.
3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear , and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]).
360 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread.
Inflation pressur es specified on the placard are always “cold tir e inflation pressure.” Cold tire inflation pressur e is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after a three-hour period.
W ARNING! High-speed driving, with your vehicle at or above maximum load, is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Do not drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
W ARNING! (Continued) • T emporary-use spare tires have limited tread life. When the tread is worn to the tread wear indica- tors, the temporary use spare tire needs to be replaced. • Be sure to follow the warnings that apply to your spare. Failure to do so could result in spare tire failure and loss of vehicle control.
W ARNING! • Fast spinning tires can be dangerous. Forces gen- erated by excessive wheel speeds may cause tire damage or failure. A tire could explode and injure someone.
Life of Tire The service life of a tire is dependent upon varying factors, including, but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! The tires and the spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
If you need snow tir es, select tir es equivalent in size and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle.
The suggested rotation method is shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure based on the cold inflation tire pressur e requir ements found on the tire placard located on the driver’s-side B-pillar .
The TPMS will continue to warn the driver of low tire pressur e as long as the condition exists, and will not turn off until the tire pressur e is at or above recommended cold tire placard pressur e.
CAUTION! (Continued) • After inspecting or adjusting the tire pressure always reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the TPMS sensor . NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition.
The Basic TPMS consists of the following components: • Receiver Module • Four T ire Pressure Monitoring Sensors • TPMS T elltale W arning Light T ire Pressure Monitoring Low T ire Pressure W arn.
3. Accumulation of excessive snow and/or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPMS sensors. V ehicles with Compact Spare 1. The compact spare tire (if equipped) does not have a TPMS sensor .
NOTE: It is particularly important to regularly check and maintain proper tire pressur e in all the tires. The Premium TPMS consists of the following compo- nents: • Receiver Module • Four TPMS Se.
Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tire pressur e value.
will not be present, and a pressure value will be dis- played instead of dashes. A system fault can occur by any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors.
5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically .
4.0L Engine The 4.0L engine is designed to meet all emissions regulations and pr ovide satisfac- tory fuel economy and performance when using high-quality unleaded gasoline hav- ing an octane range of 87 to 89. The manu- facturer recommends the use of 89 octane for optimum performance.
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are required in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle.
• disconnect and reconnect the battery to reset the engine controller memory More extensive repairs will be required for prolonged exposure to E85 fuel. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane.
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law .
Carbon Monoxide Warnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . • T o prevent carbon monoxide poisoning DO NOT inhale exhaust gases.
the other sections of this manual for information on features that are common between Flexible Fuel and gasoline only powered vehicles. CAUTION! Only vehicles with the E85 fuel filler door label can operate on E85.
Ethanol Fuel (E85) E85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
• Some additives used in regular gasoline are not fully compatible with E85 and may form deposits in your engine. T o eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOP AR 威 Injector Cleanup or T echr on may be used.
Replacement Parts Many components in your Flexible Fuel V ehicle (FFV) ar e designed to be compatible with ethanol. Always be sure that your vehicle is serviced with correct ethanol com- patible parts. CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle.
NOTE: The driver’s side sliding door cannot be opened while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the fuel door . CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap).
• If the gas cap is not tightened properly , the MIL may come on. Be sure the gas cap is tightened every time the vehicle is refueled. Loose Fuel Filler Cap Message If the vehicle diagnostic system .
• Gross Axle W eight Rating (GA WR) — Front • Gross Axle W eight Rating (GA WR) — Rear • V ehicle Identification Number (VIN) • T ype of V ehicle • Month, Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the V ehicle Identification Number (VIN).
Rim Size This is the rim size that is appropriate for the tire size listed. Inflation Pressure This is the cold tir e inflation pr essure for your vehicle, for all loading conditions up to full GA WR.
Loading T o load your vehicle properly , first figure out its empty weight, axle-by-axle and side-by-side. Stor e heavier items down low and be sure you distribute their weight as evenly as possible.
LOADING T ABLE — EXAMPLE ONL Y Front Axle Rear Axle Empty W eight 2,140 lbs (971 kg) 1,470 lbs (667 kg) Load (Driver , passengers, and cargo/luggage) 360 lbs (163 kg) 980 lbs (445 kg) LOADING T ABLE.
TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefully review this information to tow your load as efficiently and safely as possible.
Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles. Distribute the load over the front and rear axles evenly . Make sure that you do not exceed either front or rear GA WR. Refer to “V ehicle Loading/V ehicle Certifica- tion Label” in “Starting and Operating” for further information.
W eight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars. They are typically used for heavier loads to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer’s axle(s).
W ithout W eight-Distributing Hitch (Incorrect) W ith W eight-Distributing Hitch (Correct) 5 ST ARTING AND OPERA TING 397 I n f o r m a t i o n P r o v i d e d b y :.
T railer Hitch Classification Y our vehicle may be factory-equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package.
T railer T owing W eights (Maximum T railer W eight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.
Engine/T ransmission GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.8L and 4.0L/ Automatic (with T ow Package) 9,000 lbs (4 082 kg) 40 sq ft (3.72 sq m) Up to 2 persons & Luggage 3,800 lbs (1 723 kg)* 380 lbs (172 kg) 9,000 lbs (4 082 kg) 40 sq ft (3.
T railer and T railer T ongue W eight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle.
W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
W ARNING! (Continued) 3. GA WR 4. T railer tongue weight rating for that trailer hitch. (This requirement may limit the ability to always achieve the 10% to 15% range of trailer tongue weight as a percentage of total trailer weight.) T owing Requirements – T ires • Do not attempt to tow a trailer while using a compact spare tire.
• An electronically actuated trailer brake controller is requir ed when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic sur ge actuated brake system, an electr onic brake controller is not required.
The T railer T ow Package may include a four-pin or a seven-pin wiring harness. Use a factory approved trailer harness and connector . NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector .
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. Automatic T ransmission The DRIVE gear can be selected when towing.
The automatic transmission fluid and filter should be changed if you REGULARL Y tow a trailer for more than 45 minutes of continuous operation. Refer to “Mainte- nance Schedule” for the proper maintenance intervals. NOTE: • Check the automatic transmission fluid level before towing.
RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) CAUTION! T owing this vehicle behind another vehicle (flat- towing with all four wheels on the ground) is not recommended. NOTE: If the vehicle r equires towing, make sure all four wheels are off the ground.
I n f o r m a t i o n P r o v i d e d b y :.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 4 1 2 䡵 If Y our Engine Overheats ................ 4 1 2 䡵 Jacking And T ire Changing ............... 4 1 3 ▫ Jack Location ....................... 4 1 4 ▫ Spare T ire Removal .
HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the center of the instrument panel above the radio. Press the switch to turn on the Hazard W arning flasher . When the switch is activated, all dir ectional turn signals will flash on and of f to warn oncoming traffic of an emer gency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately , and call for service.
Jack Location The jack, jack handle and winch handle tools ar e stowed behind the rear left side trim panel in the r ear cargo area. T urn the two cover latches to release the cover . Remove the pouch containing the scissors jack, jack handle, and tools.
NOTE: The base console, if equipped, must be removed to raise and lower the spare tire. Refer to “Console Features” in “Understanding the Features of Y our V e- hicle” for console removal procedure.
NOTE: Passengers should not remain in the vehicle when the vehicle is being jacked. Jacking Instructions W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle.
1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 2. T o remove the compact spare tire/cover assembly , assemble the winch handle extensions to form a “T” and fit the winch “T” handle over the drive nut, refer to “2” configuration in tool graphics.
CAUTION! The winch mechanism is designed for use with the winch “T” handle only . Use of an air wrench or other power tools is not recommended and can damage the winch.
W ARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
4. When the compact spare tire/cover assembly is clear of the vehicle, stand the tire/cover assembly upright and remove the wheel spacer by squeezing the two retainer tabs together . 5. There ar e two jack engagement locations on each side of the vehicle body .
Jack Location 6 WHA T T O DO IN EMERGENCIES 421 I n f o r m a t i o n P r o v i d e d b y :.
CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 5. 6. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged.
10. Lower the vehicle by turning the jack screw to the left. 1 1. Finish tightening the lug nuts. Push down on the wrench while tightening for incr eased leverage. Alternate lug nuts until each nut has been tightened twice. The correct wheel nut tightness is 95 ft lbs (130 N·m).
of operation, and after each time a tire is changed, to allow the wheel nuts to become properly set. All nuts should first be firmly seated against the wheel. The nuts should then be tightened to recommended torque. T ighten the nuts to final torque in increments.
2. Assemble the winch handle extensions to form the spare tire hook, and pull the wheel spacer from under the vehicle. 3. T urn the compact spare tire so that the valve stem is down, and place the tir e into the spar e tire/cover assem- bly .
CAUTION! The winch mechanism is designed specifically to stow a compact spare tire only . Do not attempt to use the winch to stow the full size flat tire, or any other full-size tire.
Preparations for Jump-Start The battery in your vehicle is located on the left side of the engine compartment. W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades.
3. If using another vehicle to jump-start the battery , park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF . W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result.
W ARNING! Do not connect the cable to the negative post (-) of the discharged battery . The resulting electrical spark could cause the battery to explode and could result in personal injury .
FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area around the front wheels. Then move the shift lever back and forth between REVERSE and DRIVE.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone.
CAUTION! (Continued) • Always use wheel lift equipment when towing from the front. The only other approved method of towing is with a flatbed truck. • Do not tow the vehicle from the rear . Damage to the rear sheet metal, liftgate and fascia will occur .
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 3.3/3.8L .......... 4 3 5 䡵 Engine Compartment — 4.0L ............. 4 3 6 䡵 Onboard Diagnostic System — OBD II ...... 4 3 7 ▫ Loose Fuel Filler Cap Message ........... 4 3 7 䡵 Emissions Inspection And Maintenance Programs .
▫ Brakes ............................ 4 5 8 ▫ Automatic T ransmission ............... 4 6 1 ▫ Appearance Care And Protection From Corrosion .......................... 4 6 4 ▫ Cleaning The Instrument Panel Cupholders . . 469 䡵 Fuses .........
ENGINE COMP ARTMENT — 3.3/3.8L 1 — Air Cleaner Filter 7 — Engine Oil Fill 2 — Automatic T ransmission Dipstick (3.3L Only) 8 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 9 — Coolant P.
ENGINE COMP ARTMENT — 4.0L 1 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 2 — Air Cleaner Filter 8 — Engine Oil Fill 3 — Brake Fluid Reservoir 9 — Coolant Pressure Cap 4 — .
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
“Electronic V ehicle Information Center (EVIC)” in ”Un- derstanding Y our Instrument Panel” for further informa- tion. T ighten the gas cap until a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is properly tight- ened.
2. If you crank or start the engine, you will have to start this test over . 3. As soon as you turn the ignition switch to the ON position, you will see the MIL symbol come on as part of a normal bulb check. 4. Approximately 15 seconds later , one of two things will happen: a.
REPLACEMENT P ARTS Use of genuine MOP AR 威 parts for normal/scheduled maintenance and repairs is highly recommended to en- sure the designed performance. Damage or failures caused by the use of non-MOP AR 威 parts for maintenance and repairs will not be covered by the manufacturer’s warranty .
CAUTION! • Failure to properly maintain your vehicle or per- form repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle perfor- mance. Immediately have potential malfunctions examined by an authorized Chrysler Group LLC dealership or qualified repair center .
CAUTION! Overfilling or underfilling will cause oil aeration, or loss of oil pressure. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” for further information.
Engine Oil V iscosity (SAE Grade) – 3.3L & 3.8L Gasoline Engines SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . Y our engine oil filler cap also shows the recommended engine oil viscosity for your vehicle.
Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment.
Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system. If you notice a change in the sound of the exhaust system; or if.
CAUTION! • The catalytic converter requires the use of un- leaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emissions con- trol device and may seriously reduce engine per- formance and cause serious damage to the engine.
T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle.
CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and are identified on the battery case.
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
W ARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following procedur e to r e- place the filter: 1. Open the glove compartment and r emove all contents.
CAUTION! The A/C air filter is labeled with an arrow to indicate airflow direction through the filter . Failure to prop- erly install the filter will result in the need to replace it more often. 7. Rotate the glove compartment door back into position.
A void using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depend- ing on geographical area and frequency of use.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at anytime the ignition switch is in the ON position.
Cooling System – Drain, Flush and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals.
CAUTION! (Continued) • This vehicle has not been designed for use with Propylene Glycol-based engine coolant (anti- freeze). Use of Propylene Glycol-based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals.
NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent coolant changes.
Disposal of Used Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community .
If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check the engine coolant (antifreeze) freeze point in the radiator and in the coolant recovery bottle.
W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou would not have your full braking capacity in an emergency .
W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance.
W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Automatic T ransmission The automatic transmission and dif ferential assembly ar e contained within a single housing.
CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than the manufacturer’s recommended fluid will result in more frequent fluid and filter changes.
a. If the fluid is hot, the reading should be in the crosshatched ar ea marked “HOT” (between the upper two holes in the dipstick). b. If the fluid is cold, the fluid level should be between the lower two holes in the area marked “COLD”. If the fluid level indicates that it is low , add sufficient fluid to bring it to the proper level.
CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New V ehicle Limited W arranty .
W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using MOP AR 威 Car W ash or equiva- lent, or a mild car wash soap, and rinse the panels completely with clear water .
• If your vehicle is damaged due to an accident or similar cause which destroys the paint and protective coating, have your vehicle repaired as soon as pos- sible. The cost of such repairs is considered the respon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc.
• For tough stains, apply MOP AR 威 T otal Clean or equivalent, or a mild soap solution to a clean, damp cloth and remove the stain. Use a fresh, damp towel to remove soap residue. • For grease stains, apply MOP AR 威 Multi-Purpose Cleaner or a equivalent high quality cleaner to a clean, damp cloth and remove the stain.
solvents, detergents, or ammonia-based cleaners to clean your leather upholstery . Application of a leather condi- tioner is not requir ed to maintain the original condition. W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.
Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners.
Installation Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the corresponding openings in the drawer . FUSES T otally Integrated Power Module (TIPM) The T otally Integrated Power Module (TIPM) is located in the engine compartment near the battery .
CAUTION! • When installing the T otally Integrated Power Module cover , it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description J7 30 Amp Pink — Antilock Brakes V alve/Stability Control System J8 40 Amp Green — Power Memory Seat – If Equipped J9 40 Amp Green — Part.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description J19 60 Amp Y el- low — Radiator Fan J20 30 Amp Pink — Front W iper LO/HI J21 20 Amp Blue — Front/Rear W asher J22 25 Amp Natural — Sunroo.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M10 — 15 Amp Blue Ignition Off Draw — V ideo System, Satel- lite Radio, DVD, Hands- Free Module, Universal Ga- rage Door Opener , V anity Lam.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M15 — 20 Amp Y el- low Rear V iew Mir- ror , Instrument Cluster , Multi- Function Con- trol Switch, T ir e Pressur e Moni- tor , Glow Plug Modu.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M20 — 15 Amp Blue Instrument Cluster Interior Light, Switch Bank, Steering Column Mod- ule, Switch Steering Wheel M21 — 20 Amp Y el- low Auto.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M28 — 10 Amp Red Powertrain Control Mod- ule, T ransmis- sion Feed, T ransmission Control Module M29 — 10 Amp Red Occupant Clas- sification M.
FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description M34 — 10 Amp Red Park Assist, Heater Climate Control System Module, Head- lamp W ash, Compass, IR Sensor , Rear Camera, Lamp Door FT Drv/ Pass,.
breaker located under the instrument panel near the steering column. If you experience temporary or perma- nent loss of these systems, see your authorized dealer for service. VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days, you may want to take steps to protect your battery .
All of the interior bulbs are glass wedge base or glass cartridge types. Aluminum base bulbs are not approved and should not be used for replacement. LIGHT BULBS – Exterior Bulb Number Backup, T ail, Stop Lamp ................... 3157 Center High-Mounted Stop Lamp .
NOTE: On vehicles equipped with High Intensity Dis- charge (HID) headlamps, when the headlamps are turned on, there is a blue hue to the lamps. This dimin- ishes and becomes mor e white after approximately 10 seconds, as the system charges. Quad Headlamps 1.
Front Side Marker Lamp 1. Raise the hood to access the rear of the headlamp housing. NOTE: Access is somewhat limited. Y ou may have to remove the inner fender well or remove the headlamp housing for bulb replacement. 2. T wist the socket and remove from the headlamp housing, then pull the bulb out.
2. Remove the tail lamp assembly by removing the two screws from the inboard side. Use a fiber stick or similar tool to gently pry the light on the outboar d side to disengage the two ball studs. NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint.
3. T wist the socket and remove it from the lamp assem- bly . 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and r eattach the lamp assembly . Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately .
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 20 Gallons 76 Liters Engine Oil with Filter 3.3L and 3.8L Engine (SAE 5W -20, API Certified) 5 Quarts 4.7 Liters 4.0L Engine (SAE 10W -30, API Certified) 5.5 Quarts 5.2 Liters Cooling System * 3.3L, 3.8L, and 4.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant Five Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent. Engine Oil – 3.3L and 3.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Brake Master Cylinder MOP AR 威 DOT 3 and SAE J1703 should be used or equivalent.
I n f o r m a t i o n P r o v i d e d b y :.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 9 0 䡵 Maintenance Schedule .................. 4 9 0 ▫ Required Maintenance Intervals .
EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time.
• Inspect the battery and clean and tighten the terminals as required. • Check the fluid levels of the coolant reservoir , the brake master cylinder , the power steering and the transmission and add as needed. • Check all lights and other electrical items for correct operation.
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter .
102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the ignition cables (3.3L and 3.8L engines). ❏ Replace the spark plugs (3.3L, 3.8L, and 4.0L engines).
1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.
† This maintenance is recommended by the manufac- turer , but is not required to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
I n f o r m a t i o n P r o v i d e d b y :.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 5 0 9 ▫ Prepare For The Appointment ........... 5 0 9 ▫ Prepare A List ...................... 5 0 9 ▫ Be Reasonable W ith Requests .
䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 5 1 5 ▫ T readwear ......................... 5 1 5 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the authorized dealer- ship.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center .
W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere efforts to resolve any warranty issues or related concerns.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer .
• Service Manuals These compr ehensive Service Manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing, and repairing Chrysler Group LLC vehicles.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tir e grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tir es on your vehicle.
T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
Adding Engine Coolant (Antifreeze) .......... 4 5 5 Adding Fuel ........................... 3 8 7 Adding W asher Fluid ..................... 4 5 2 Additives, Fuel ......................... 3 8 1 Adjustable Pedals ....................... 1 7 2 Air Cleaner , Engine (Engine Air Cleaner Filter) .
Automatic T ransaxle ...................... 3 3 0 Adding Fluid ......................... 4 6 3 Fluid Level Check ..................... 4 6 3 Interlock System ....................... 3 3 1 Selection Of Lubricant ................ 461,487 Shifting ......
Caps, Filler Fuel ............................... 3 8 7 Oil (Engine) .......................... 4 4 3 Power Steering ........................ 3 4 2 Radiator (Coolant Pressure) ............... 4 5 6 Car W ashes ............................ 4 6 5 Carbon Monoxide W arning .
Connector U C I ................................ 2 8 9 Universal Consumer Interface (UCI) ......... 2 8 9 Console .............................. 2 1 5 Console, Floor .......................... 2 1 5 Console, Overhead ....................... 1 8 9 Console, Removable .
Engine Oil ........................... 4 4 4 Domelight ............................. 1 6 0 Door Locks ............................. 3 0 Door Locks, Automatic .................... 3 3 Door Opener , Garage ..................... 1 9 2 Driving On Slippery Surfaces .
Oil Change Interval .................... 4 4 2 Oil Disposal .......................... 4 4 4 Oil Filler Cap ......................... 4 4 3 Oil Filter Disposal ..................... 4 4 4 Oil Selection ....................... 442,485 Oil Synthetic ...
Fluid Capacities ......................... 4 8 5 Fluid Leaks ............................ 1 0 5 Fluid Level Checks Automatic T ransaxle .................... 4 6 3 Automatic T ransmission ................. 4 6 2 Brake .............................. 4 5 9 Power Steering .
Speedometer ......................... 2 3 6 T achometer .......................... 2 4 0 Gearshift .............................. 3 3 2 General Information .................. 16,26,378 Glass Cleaning .......................... 4 6 8 Grocery Bag Retainer .
Information Center , V ehicle ................. 2 5 0 Inside Rearview Mirror .................... 1 1 2 Instrument Cluster ....................... 2 3 3 Instrument Panel and Controls .............. 2 3 1 Instrument Panel Cover ................... 4 6 7 Instrument Panel Lens Cleaning .
Back-Up ............................ 4 8 2 Battery Saver ......................... 1 6 4 Brake Assist W arning ................... 3 5 1 Brake W arning ........................ 2 3 7 Bulb Replacement ................... 479,480 Center Mounted Stop ...
W arning (Instrument Cluster Description) ..... 2 3 3 Load Leveling System .................... 2 2 1 Loading V ehicle ................... 214,389,392 Capacities ........................... 3 9 2 T i r e s ............................... 3 5 7 Locks Door .
New V ehicle Break-In Period ................ 1 0 0 Occupant Restraints ................... 52,75,79 Occupant Restraints (Sedan) ........... 71,72,75,78 Odometer ............................. 2 4 5 Oil Change Indicator ................ 244,246,254 Oil Change Indicator , Reset .
Power Door Locks ........................... 3 2 Lift Gate ............................. 4 9 Mirrors ............................. 1 1 4 Outlet (Auxiliary Electrical Outlet) .......... 2 0 1 Seats ............................... 1 3 0 Sliding Door ...
Replacement Parts ....................... 4 4 0 Replacement T ires ....................... 3 6 7 Reporting Safety Defects ................... 5 1 2 Resetting Oil Change Indicator ......... 244,246,254 Restraint, Head ......................... 1 3 2 Restraints, Child .
Memory ............................ 1 5 3 Power .............................. 1 3 0 Reclining ............................ 1 2 8 Stow ⬘ n Go (Fold in Floor) ............... 1 3 6 T ilting .............................. 1 3 9 Security Alarm (Theft Alarm) .
Steering Wheel Mounted Sound System Controls .............................. 3 0 0 Storage ............................ 207,479 Storage Bin ............................ 2 0 7 Storage, V ehicle ...................... 321,479 Storing Y our V ehicle .....
Replacement ......................... 3 6 7 Rotation ............................ 3 6 9 Safety ........................... 352,361 Sizes ............................... 3 5 3 Snow T ires ........................... 3 6 8 Spare T ire ..................
T rip Odometer .......................... 2 4 5 T urn Signals ................... 165,236,481,482 UCI Connector ......................... 2 8 9 Uconnect™ (Hands-Free Phone) ............. 1 2 5 Umbrella Holder ........................ 2 1 0 Uniform T ire Quality Grades .
Power ............................... 3 6 Rear V ent ............................ 3 6 W indows, Express Down ................... 2 2 W indshield Defroster ..................... 1 0 3 W indshield W ashers ...................... 4 5 2 W indshield W iper Blades .
Chrysler Group LL C 10 Y531-126-AC 3rd Edition Printed in U.S.A. I n f o r m a t i o n P r o v i d e d b y :.
デバイスChrysler Town & Country (2010)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Chrysler Town & Country (2010)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはChrysler Town & Country (2010)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Chrysler Town & Country (2010)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Chrysler Town & Country (2010)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Chrysler Town & Country (2010)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はChrysler Town & Country (2010)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Chrysler Town & Country (2010)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちChrysler Town & Country (2010)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
