ChryslerメーカーTown & Country (2014)の使用説明書/サービス説明書
ページ先へ移動 of 701
T own & C ountr y Chrysler Group LL C OWNER ’S MANUAL 2014 T own & Country 14Y531- 126- AD F ourth E dition R ev 1 Printed in U .
VEHICLES SOLD IN CANAD A With respect to any V ehicles Sold in Canada, the name Chr ysler Group LL C shall be deemed to be deleted and the name Chr ysler Canada Inc. used in substitution therefore . DRIVING AND AL COHOL Drunk en driving is one of the most frequent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS 䡵 INTRODUCTION ........................ 4 䡵 HOW TO USE THIS MANUAL .............. 4 䡵 W ARNINGS AND CAUTIONS ..............
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it repr esents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
1 INTRODUCTION 5 I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This Owners Manual contains W ARNINGS against op- erating procedur es that could result in a collision or bodily injury . It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
NOTE: It is illegal to remove or alter the VIN. VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
I n f o r m a t i o n P r o v i d e d b y :.
.
▫ Sound Horn W ith Remote Lock ............ 2 5 ▫ Using The Panic Alarm .................. 2 6 ▫ Power Open/Close Power Liftgate — If Equipped .......................... 2 7 ▫ Power Open/Close Left Power Sliding Door — If Equipped ........
䡵 LIFTGA TE ............................ 5 8 ▫ Power Liftgate — If Equipped ............. 5 9 䡵 OCCUP ANT RESTRAINTS ................ 6 2 ▫ Lap/Shoulder Belts .................... 6 6 ▫ Seat Belts In Passenger Seating Positions ...... 7 2 ▫ Automatic Locking Retractor Mode (ALR) — If Equipped .
䡵 SAFETY TIPS ........................ .123 ▫ T ransporting Passengers ................ .123 ▫ Exhaust Gas ........................ .123 ▫ Safety Checks Y ou Should Make Inside The V ehicle ............................ .124 ▫ Periodic Safety Checks Y ou Should Make Outside The V ehicle .
A WORD ABOUT YOUR KEYS Y our vehicle is equipped with a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up.
Key Fob The Key Fob operates the ignition switch. Insert the square end of the Key Fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion. It also contains the Remote Keyless Entry (RKE) transmitter and an emer gency key , which stores in the rear of the Key Fob.
Removing Key Fob From Ignition Place the shift lever in P ARK. T urn the Key Fob to the OFF position and then remove the Key Fob. NOTE: Power window switches will also remain active for up to 10 minutes after the ignition switch has been turned to OFF , depending upon the accessory delay setting.
CAUTION! An unlocked car is an invitation to thieves. Always remove the Key Fob from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder Opening the driver’s door when the Key Fob is in the ignition and the ignition switch position is OFF or ACC, a chime will sound to remind you to remove the key .
the bulb check, it indicates that someone used an invalid Key Fob to start the engine. Either of these conditions will result in the engine being shut off after two seconds. If the V ehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is a fault in the electron- ics.
At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location. This number is requir ed for authorized dealer replacement of Key Fobs.
VEHICLE SECURITY ALARM — IF EQUIPPED The V ehicle Security Alarm monitors the vehicle doors for unauthorized entry and the ignition switch for unau- thorized operation. When the alarm is activated, the interior switches for door locks, power sliding doors and power liftgate ar e disabled.
• Push the LOCK button on the exterior Passive Entry Door Handle with a valid Key Fob available in the same exterior zone (refer to ⬙ Keyless Enter-N-Go™ ⬙ in ⬙ Things T o Know Before Starting Y our V ehicle ⬙ for further information). • Push the LOCK button on the Remote Keyless Entry (RKE) transmitter .
• When the V ehicle Security Alarm is armed, the interior power door lock switches will not unlock the doors. The V ehicle Security Alarm is designed to protect your vehicle; however , you can create conditions where the system will give you a false alarm.
The lights will fade to of f after appr oximately 30 seconds, or they will immediately fade to off once the ignition switch is turned to ON/RUN from the OFF position.
T wo RKE transmitters may be supplied with the vehicle. V ehicles built without the powered options will be equipped from the factory with three-button RKE trans- mitters, and those built with power options will be equipped with up to seven-button RKE transmitters.
(optional), power sliding doors, Remote Start feature (optional). Some featur es can be programmed to the customers prefer ences. For example, flash headlights or sound horn on LOCK.
• For vehicles not equipped with the EVIC, the Remote Unlock feature can be enabled or disabled by perform- ing the following steps: 1. Perform this operation while standing outside the vehicle. 2. Press and hold the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds.
• For vehicles not equipped with the EVIC, perform the following steps: 1. Perform this operation while standing outside the vehicle. 2. Press the LOCK button on a programmed RKE trans- mitter for at least 4 seconds, but no longer than 10 seconds. Then, press the P ANIC button while still holding the LOCK button.
NOTE: • When you turn off the Panic Alarm by pressing the P ANIC button a second time, you may have to move closer to the vehicle due to the Radio Frequency (RF) noises of the system. • The Panic Alarm cannot be activated if the engine is running.
If the vehicle is locked and the V ehicle Security Alarm is armed, pressing the LEFT Power Sliding Door button twice unlocks the power sliding door and disarms V e- hicle Security Alarm.
2. Press and hold the UNLOCK button on a pr ogrammed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button.
1. Remove the emergency key by sliding the mechanical latch at the top of the RKE transmitter sideways with your thumb and then pull the key out with your other hand. 2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the RKE transmitter apart.
3. Remove and replace the battery . When replacing the battery , match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover . A void touching the new battery with your fingers. Skin oils may cause battery deterioration.
If your RKE transmitter fails to operate from a normal distance, check for these two conditions: 1. A weak battery in the transmitter . The expected life of the battery is a minimum of three years. 2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , and some mobile or CB radios.
• Ignition key removed from ignition switch • Battery at an acceptable charge level • RKE P ANIC button not pressed • System not disabled from previous remote start event • V ehicle theft alarm not active • Ignition in Off position (Keyless Enter-N-Go™) W ARNING! • Do not start or run an engine in a closed garage or confined area.
The EVIC message stays active until the ignition is turned to the ON/RUN position. T o Enter Remote Start Mode Press and release the REMOTE ST ART button on the RKE transmitter twice within five sec- onds. The vehicle doors will lock, the parking lights will flash and horn will chirp twice (if programmed).
T o Exit Remote Start Mode And Drive The V ehicle Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped). Then, prior to the end of the 15-minute cycle, press and release the ST AR T/STOP button.
Cancel Remote Start Remote Starting will also cancel if any of the following occur: • The engine stalls or engine speed exceeds 2500 rpm • Any engine warning lights come on • Fuel lamp turns on .
DOOR LOCKS Manual Door Locks Lock the front doors by pushing down on the lock knobs on each door trim panel. If the lock knob is down when you shut either fr ont door , the door will lock. Make sure the keys are not inside the vehicle before closing the door .
W ARNING! • For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle. (Continued) W ARNING! (Continued) • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle.
Power Door Locks — If Equipped A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the Key Fob is in the ignition, and any front door is open, the power locks will not operate.
If you press the power door lock switch while the sliding door is open, the sliding door will lock. Automatic Door Locks — If Equipped When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
On vehicles equipped with the optional Electronic V e- hicle Information Center (EVIC), refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr ogrammable Features)” in “Understanding Y our Instrument Panel” for further information.
T o Unlock From The Driver’s Side: W ith a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the driver’s door handle, grab the driver’s fr ont door handle to unlock the driver’s door automatically . The interior door panel lock knob will raise when the door is unlocked.
Preventing Inadvertent Locking Of Passive Entry RKE T ransmitter In V ehicle T o minimize the possibility of unintentionally locking a Passive Entry RKE transmitter inside your vehicle, the Passive Entry system is equipped with an automatic door unlock feature which will function if there is no Key Fob present in the ignition.
T o Lock The V ehicle’ s Doors W ith one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handle, pr ess the door handle LOCK button to lock all four doors. Do NOT grab the door handle, when pressing the door handle lock button.
NOTE: • After pressing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking.
Power Windows Y ou can control either the front or rear windows using switches located on the driver’s door trim panel. The switches will operate only when the ignition switch is in the ON/RUN or ACC position and during power acces- sory delay .
Front Passenger Power Window Switch There is a single switch on the front passenger ’s door trim panel which operates the passenger door window and a set of switches that lock and unlock all doors. The switches will operate only when the ignition switch is in the ON/RUN or ACC position and during power acces- sory delay .
Auto-Down Feature — If Equipped The front window switches may be equipped with an Auto-Down feature. Pr ess the window switch past the detent, release, and the window will go down automatically . T o open the window part way , press the window switch part way and release it when you want the window to stop.
W ARNING! There is no anti-pinch protection when the window is almost closed. T o avoid personal injury be sure to clear your arms, hands, fingers and all objects from the window path before closing. Auto Up Reset — If Equipped T o reactivate the Auto Up feature, perform the following steps after vehicle power is restor ed: 1.
NOTE: The sliding door windows do not fully open, stopping several inches above the window sill. W ind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears.
T o keep your door operating properly , observe the fol- lowing guidelines: • Always open the door smoothly . • A void high impacts against the door stop when open- ing the door . This is very important when your vehicle is parked on an incline as the door will slide faster in the downhill direction.
Press the button on the RKE transmitter twice within five seconds to open a power sliding door . When the door is fully open, pressing the button twice within five seconds a second time will close the door .
T o avoid unintentional operation of the power sliding doors from the r ear seats, press the power sliding door master lock button, located in the overhead console, to disable the switches and handles for the r ear seat passen- gers.
Power Sliding Side Door Open Flash The left and right exterior hazard lights will flash for 12 seconds when either sliding door is opened. This will alert other drivers in the area that passenger(s) could be entering or exiting the vehicle. The Sliding Side Door Open Flash can be enabled or disabled by performing the following procedur e: 1.
Sliding Side Door Child Protection Lock T o provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a Child Protection Door Lock system.
T o Engage The Child Protection Door Lock 1. Open the sliding side door . 2. Slide the Child Protection Door Lock control inward (toward the vehicle) to engage the Child Protection Door Lock.
W ARNING! A void trapping anyone in the vehicle in a collision. Remember that the sliding doors can only be opened from the outside door handle or the switches located on the B-Pillar trim panel just in front of the power sliding door when the Child Protection Door Locks are engaged.
LIFTGA TE On vehicles equipped with power locks, the liftgate can be unlocked using the Remote Keyless Entry (RKE) transmitter button, or by activating the power door lock switches located on the front doors.
Power Liftgate — If Equipped The power liftgate may be opened manually or by using the button on the Remote Keyless Entry (RKE) transmit- ter . Press the button on the transmitter twice within five seconds, to open the power liftgate.
The power liftgate may be closed by pressing the button, located in the upper left trim in the liftgate opening. Pushing once will only close the liftgate.
• During power operation, whether liftgate is fully open or fully closed, the liftgate chime will beep several times indicating power operation is in progress. • The power liftgate must be in the full open or close positions for any of the buttons to operate.
OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems: • Three-point lap and shoulder belts for all seating positions • Advanced Front Air Bags .
If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) feature also can be used to hold infant and child restraint systems. For more information on LA TCH, refer to Lower Anchors and T ether for CHildren (LA TCH).
If a child from 2 to 12 years old (not in a r ear facing child seat) must ride in the front passenger seat, move the seat as far back as possible and use the proper child restraint. (Refer to “Child Restraints”). Y ou should read the instructions provided with your child r estraint to make sure that you are using it properly .
W ARNING! (Continued) • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury , including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Buckle up even though you are an excellent driver , even on short trips. Someone on the road may be a poor driver and cause a collision that includes you. This can happen far away from home or on your own street. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision.
W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too.
W ARNING! • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause inter- nal injuries. Ribs aren’t as strong as shoulder bones.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you prop- erly .
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt may not protect you properly .
Pull the strap down and secure the small latch plate of the lap belt into the small buckle until you hear a “click”. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. When the belt is long enough to fit , insert the large latch plate into the buckle until you hear a “click.
As a guide, if you are shorter than average you will prefer a lower position, and if you are taller than average you will prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
Second Row Captains Chairs Driver Center Passenger First Row N/A N/A ALR Second Row SnG Seating ALR N/A ALR Third Row ALR Cinch ALR • N/A — Not Applicable • ALR — Automatic Locking Retractor I.
How T o Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
Seat Belt Pretensioners The seat belts for both fr ont seating positions are equipped with pretensioning devices that ar e designed to remove slack fr om the seat belt in the event of a collision. These devices may improve the performance of the seat belt by assuring that the belt is tight about the occupant early in a collision.
This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts. NOTE: The Active Head Restraints (AHR) may or may not deploy in the event of a front or side impact.
CAUTION! All occupants, including the driver , should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 4. The AHR front soft foam and trim half should lock into the back decorative plastic half.
NOTE: • If you have difficulties or problems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer .
The front passenger seat BeltAlert® is not active when the front passenger seat is unoccupied. BeltAlert® may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped).
W ARNING! Using a seat belt extender when not needed can in- crease the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug and in the recommended seating positions. Remove and store the extender when not needed.
NOTE: The Driver and Passenger Advanced Fr ont Air Bags are certified to new Federal regulations. The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have differ ent rates of inflation based on the severity and type of collision.
• Air Bag W arning Light • Steering Wheel and Column • Instrument Panel • Supplemental Driver Side Knee Air Bag • Knee Impact Bolsters • Driver Advanced Front Air Bag • Passenger Advance.
W ARNING! • No objects should be placed over or near the air bag on the instrument panel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bag to inflate. • Do not put anything on or around the air bag covers or attempt to open them manually .
When the air bag deploys, it opens the seam between the front and side of the seat’s trim cover . Each air bag deploys independently; a left side impact deploys the left air bag only and a right-side impact deploys the right air bag only .
Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may of fer side-impact and vehicle r oll- over protection to fr ont and rear seat outboard occupants in addition to that provided by the body structur e.
W ARNING! (Continued) • Do not use accessory seat covers or place objects between you and the side air bags; the performance could be adversely af fected and/or objects could be pushed into you, causing serious injury .
Knee Impact Bolsters The Knee Impact Bolsters help protect the knees of the driver and front passenger , and position the front occu- pants for the best interaction with the Advanced Fr ont Air Bags.
Side Knee Air Bag may deploy in crashes with little vehicle front-end damage but that produce a severe initial deceleration. The side air bags will not deploy in all side collisions. Side air bag deployment will depend on the severity and type of collision.
W ARNING! Ignoring the Air Bag W arning Light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the .
Supplemental Driver Side Knee Air Bag. The trim cover separates and folds out of the way allowing the air bag to inflate to the full size. The air bag fully inflates in about 15 to 20 milliseconds.
positioned in the area where the side curtain air bag inflates. This especially applies to children. The side curtain air bag is only about 3-1/2 in (9 cm) thick when it is inflated. Because air bag sensors estimate deceleration over time, vehicle speed and damage are not good indicators of whether or not an air bag should have deployed.
NOTE: Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong with the air bag system. If you do have a collision which deploys the air bags, any or all of .
Maintaining Y our Air Bag System W ARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. Y ou could be injured if the air bag system is not there to protect you.
Air Bag W arning Light Y ou will want to have the air bags ready to inflate for your protection in a collision. The Air Bag W arning Light monitors the internal circuits and inter connecting wiring associated with air bag system electrical components.
• Whether or not the driver and passenger safety belts were buckled/fastened; • How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, • How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur .
There are differ ent sizes and types of restraints for children from newborn size to the child almost lar ge enough for an adult safety belt. Always check the child seat Owner ’s Manual to make sure you have the correct seat for your child.
Summary Of Recommendations For Restraining Children In V ehicles Child Size, Height, W eight Or Age Recommended T ype Of Child Restraint Infants and T oddlers Children who are two years old or younger.
Infants And Child Restraints Safety experts recommend that children ride rearwar d- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their r ear facing child safety seat. T wo types of child restraints can be used rearwar d-facing: infant carriers and convertible child seats.
Older Children And Child Restraints Children who are two years old or who have outgrown their rear-facing convertible child seat can ride forward- facing in the vehicle.
Children T oo Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat.
Recommendations For Attaching Child Restraints Restraint T ype Combined W eight of the Child + Child Restraint Use any attachment method shown with an “X” Below LA TCH – Lower Anchors Only Seat Belt Only LA TCH – Lower Anchors + T op T ether Anchor Seat Belt + T op T ether Anchor Rear-Facing Child Restraint Up to 65 lbs (29.
Lower Anchors And T ethers For Children (LA TCH) Restraint System Y our vehicle is equipped with the child restraint anchor- age system called LA TCH, which stands for Lower Anchors and T ethers for CHildren. The LA TCH system has three vehicle anchor points for installing LA TCH- equipped child seats.
LA TCH Positions For Installing Child Restraints In This V ehicle Second Row Captains Chairs • Lower Anchorage Symbol 2 anchorages per seat- ing position • T op T ether Anchorage Symbol Second Row.
Child Restraint LA TCH Positions What is the weight limit (child’s weight + weight of the child restraint) for using the LA TCH anchorage system to attach the child restraint? 65 lbs (29.5 kg) Use the LA TCH anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.
Can two child restraints be attached using a common lower LA TCH an- chorage? No Never “share” a LA TCH anchorage with two or more child restraints.
Locating The LA TCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run your finger along the gap between the seatback and seat cushion.
Locating The LA TCH Anchorages In addition, there are tether strap anchors lo- cated behind each rear seatback, near to the floor . LA TCH Anchorages (Third Row 60/40 Anchorages Shown) LA TCH Anchorag.
LA TCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage. Forward-facing child restraints and some rear -facing infant restraints will also be equipped with a tether strap.
Always follow the directions of the child restraint manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here.
6. T ighten all of the straps as you push the child r estraint rearwar d and downward into the seat. Remove slack in the straps according to the child restraint manufac- turer ’s instructions. 7. T est that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path.
W ARNING! • Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint.
Lap/Shoulder Belt Systems for Installing Child Restraints in this V ehicle Second Row Captains Chair Second Row Bench 2 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 1 13 I n f o r m a t i o n P r o v .
Lap/Shoulder Belt Systems What is the weight limit (child’s weight + weight of the child restraint) for using the T ether Anchor with the seat belt to attach a forward facing child restraint? W eigh.
Installing A Child Restraint With A Switchable Automatic Locking Retractor (ALR) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit.
9. T est that the child restraint is installed tightly by pulling back and forth on the child seat at the seat belt path. It should not move more than 1 inch (25.4 mm) in any direction. Any seat belt system will loosen with time, so check the seat belt occasionally , and pull it tight if necessary .
6. T est that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move mor e than 1 inch (25 mm) in any direction. Any seat belt system will loosen with time, so check the belt occasionally , and pull it tight if necessary .
2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head r estraint, and where possible, route the tether strap under the head restraint and between the two posts.
4. Remove slack in the tether strap according to the child restraint manufacturer ’s instructions. W ARNING! • An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap.
COMMERCIAL CARGO VEHICLES (NO F ACTOR Y INST ALLED REAR SEA TS) — IF EQUIPPED Commercial cargo vehicles are not designed for use as a family vehicle and ar e not intended for carrying children in the front passenger seat.
Restraining Infants And Small Children In Commercial Cargo V ehicles There are differ ent sizes and types of restraints for children from newborn size to the child almost lar ge enough for an adult safety belt. Use the restraint that is correct for your child.
ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA. W ARNING! • Do not leave children or animals inside parked vehicles in hot weather . Interior heat build-up may cause serious injury or death. • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
W ARNING! (Continued) • If you are required to drive with the trunk/liftgate/ rear doors open, make sure that all windows are closed and the climate control BLOWER switch is set at high speed.
Air Bag W arning Light The light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned ON. If the light is not lit during starting, see your authorized dealer . If the light stays on, flickers, or comes on while driving, have the system checked by an authorized dealer .
W ARNING! (Continued) • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from moving and interfer- ing with the pedals or the ability to control the vehicle. • Never put floor mats or other floor coverings on top of already installed floor mats.
Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks.
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 MIRRORS ........................... .136 ▫ Inside Day/Night Mirror — If Equipped . . . .136 ▫ Automatic Dimming Mirror — If Equipped . . .137 ▫ Outside Mirrors ..................... .
䡵 Uconnect® PHONE — IF EQUIPPED ....... .152 ▫ Operation ......................... .154 ▫ Phone Call Features .................. .161 ▫ Uconnect® Phone Features ............. .164 ▫ Advanced Phone Connectivity ........... .169 ▫ Things Y ou Should Know About Y our Uconnect® Phone .
▫ Manually Folding Third Row Seats — If Equipped .......................... .216 ▫ Plastic Grocery Bag Retainer Hooks ........ .220 䡵 DRIVER MEMORY SEA T — IF EQUIPPED . . . .220 ▫ Setting Memory Positions And Linking RKE T ransmitter T o Memory .
䡵 WINDSHIELD WIPER AND W ASHERS ..... .235 ▫ Intermittent W iper System .............. .236 ▫ W indshield W iper Operation ............ .236 ▫ W indshield W ashers ................... .236 ▫ Mist Feature ........................ .236 ▫ Rear W iper And W asher .
▫ Cleaning The ParkSense® System ......... .254 ▫ ParkSense® System Usage Precautions ...... .254 䡵 P ARKVIEW® REAR BACK UP CAMERA — IF EQUIPPED ........................ .256 䡵 OVERHEAD CONSOLES ................ .259 ▫ Front Overhead Console .
▫ Closing Sunroof — Express .............. .274 ▫ Closing Sunroof — Manual Mode ......... .274 ▫ Pinch Protect Feature .................. .274 ▫ V enting Sunroof — Express ............. .274 ▫ Sunshade Operation ................... .275 ▫ W ind Buffeting .
▫ Coat Hooks ........................ .292 ▫ Cargo Ar ea Storage ................... .292 䡵 CONSOLE FEA TURES .................. .293 ▫ Basic Console ....................... .293 ▫ Premium Console — If Equipped ......... .294 ▫ Super Console — If Equipped .
MIRRORS Inside Day/Night Mirror — If Equipped A two-point pivot system allows for horizontal and vertical adjustment of the mirror . Adjust the mirror to center on the view through the rear window . Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. Y ou can turn the feature on or off by pressing the button at the base of the mirr or . A light to the left of the button will illuminate to indicate when the dimming feature is activated.
Outside Mirrors T o receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traf fic with a slight overlap of the view obtained on the inside mirror . W ARNING! V ehicles and other objects seen in an outside convex mirror will look smaller and farther away than they really are.
Power Mirrors — If Equipped The power mirror controls are located on the driver-side door trim panel. The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. T o adjust a mirror , press either the L (left) or R (right) to select the mirror that you want to adjust.
Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster (if equipped). Refer to “Rear W indow Featur es” in “Understanding The Featur es Of Y our V ehicle” for further information.
NOTE: If the vehicle speed is greater than 10 mph (16 km/h) the folding feature will be disabled. If the mirrors are in the folded position, and vehicle speed is equal or greater than 10 mph (16 km/h), they will automatically unfold.
Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is located on the sun visor . T o use the mirror , rotate the sun visor down and swing the mirror cover upward. The lights turn on automati- cally . Closing the mirror cover turns off the lights.
When the vehicle is started, the BSM warning light will momentarily illuminate in both outside rear view mirr ors to let the driver know that the system is operational. Automatic T ransmission V ehicles The BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand-by mode when the vehicle is in P ARK.
NOTE: • The BSM system does NOT alert the driver about rapidly approaching vehicles that are outside the de- tection zones. • The BSM system detection zone DOES NOT change if your vehicle is towing a trailer . Ther efore, visually verify the adjacent lane is clear for both your vehicle and trailer befor e making a lane change.
The BSM system monitors the detection zone from three differ ent entry points (side, rear , front) while driving to see if an alert is necessary . The BSM system will issue an alert during these types of zone entries. Entering From The Side V ehicles that move into your adjacent lanes from either side of the vehicle.
Entering From The Rear V ehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h). Overtaking T raffic If you pass another vehicle slowly (with a relative speed of less than 15 mph (24 km/h) and the vehicle remains in the blind spot for appr oximately 1.
The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However , occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service.
The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. W ARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals.
RCP monitors the rear detection zones on both sides of the vehicle, for objects that are moving towar d the side of the vehicle with a minimum speed of approximately 3 mph (5 km/h), to objects moving a maximum of approximately 20 mph (32 km/h), such as in parking lot situations.
Modes Of Operation Modes Of Operation With EVIC Three selectable modes of operation are available in the Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Under- standing Y our Instrument Panel” for further information.
When the system is in RCP , the system shall r espond with both visual and audible alerts when a detected object is present. Whenever an audible alert is r equested, the radio volume is reduced. T urn/hazard signal status is ignored; the RCP state always requests the chime.
Uconnect® PHONE — IF EQUIPPED Uconnect® Phone is a voice-activated, hands-fr ee, in- vehicle communications system. Uconnect® Phone al- lows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call” ѧ “Mike” ѧ “W ork” or “Dial” ѧ “248-555-1212”).
W ARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Y our at- tention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.
Operation V oice commands can be used to operate the Uconnect® Phone and to navigate through the Uconnect® Phone menu structure. V oice commands are required after most Uconnect® Phone prompts. Y ou will be prompted for a specific command and then guided through the available options.
T o activate the Uconnect® Phone, simply push the button and follow the audible prompts for directions. Uconnect® Phone sessions begin with a push of the button on the radio control head. Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu.
Y ou will then be asked to give your mobile phone a priority level between one and seven, with one being the highest priority . Y ou can pair up to seven mobile phones to your Uconnect® Phone. However , at any given time, only one mobile phone can be in use, connected to your Uconnect® System.
or downloaded phonebook. T o learn how to store a name in the phonebook, refer to “Add Names to Y our Uconnect® Phonebook.” • The Uconnect® system will confirm the name and then dial the corr esponding phone number , which may appear in the display of certain radios.
• This downloaded phonebook cannot be edited or deleted on the Uconnect® Phone. These can only be edited on the mobile phone. The changes are trans- ferred and updated to Uconnect® Phone on the next phone connection.
Edit Uconnect® Phonebook Entries NOTE: Editing phonebook entries is recommended when the vehicle is not in motion. Automatic down- loaded phonebook entries cannot be deleted or edited. • Push the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook Edit.
• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say “List Names” to hear a list of the entries in the phonebook from which you choose.
List All Names In The Uconnect® Phonebook • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook List Names.” • The Uconnect® Phone will play the names of all the phonebook entries, including the downloaded phone- book entries, if available.
Answer Or Reject An Incoming Call — Call Currently In Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your mobile phone. Press the button to place the current call on hold and answer the incoming call.
Conference Call When two calls are in progress (one active and one on hold), press and hold the button until you hear a double beep indicating that the two calls have been joined into one conference call.
Call Continuation Call continuation is the progr ession of a phone call on the Uconnect® Phone after the vehicle ignition has been switched to OFF . Call continuation functionality avail- able on the vehicle can be any one of three types: 1.
Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the Uconnect® Phone is operational, you may reach the emergency number as follows: • Press the button to begin.
W ARNING! T o use your Uconnect® Phone System in an emer- gency , your mobile phone must be: • turned on, • paired to the Uconnect® System, • and have network coverage. Roadside Assistance/T owing Assistance If you need roadside assistance: • Press the button to begin.
W orking W ith Automated Systems This method is used in instances wher e one generally has to press numbers on the mobile phone keypad while navigating through an automated telephone system. Y ou can use your Uconnect® Phone to access a voice mail system or an automated service, such as a paging service or automated customer service line.
Barge In — Overriding Prompts The “V oice Command” button can be used when you wish to skip part of a prompt and issue your voice command immediately .
NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect® Phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after successfully dialing a number the user may feel that the call did not go through even though the call is in progress.
List Paired Mobile Phone Names • Press the button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing.” • When prompted, say “List Phones.” • The Uconnect® Phone will play the phone names of all paired mobile phones in order from the highest to the lowest priority .
Things Y ou Should Know About Y our Uconnect® Phone Uconnect® Phone T utorial T o hear a brief tutorial of the system features, press the button and say “Uconnect® T utorial.
This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will prompt you before resetting to factory settings. V oice Command • For best performance, adjust the rearview mirror to provide at least ½ inch (1 cm) gap between the overhead console (if equipped) and the mirror .
• It is not recommended to store similar sounding names in the Uconnect® Phonebook. • Phonebook (Downloaded and Uconnect® Phone Lo- cal) name recognition rate is optimized when the entries are not similar . • Numbers must be spoken in single digits.
• In a convertible vehicle, system performance may be compromised with the convertible top down Recent Calls If your phone supports “Automatic Phonebook Down- load,” Uconnect® Phone can list your Outgoing, Incom- ing and Missed Calls. V oice T ext Reply Uconnect® Phone can read or send new messages on your phone.
T o send a message, press the button while the system is listing the message and say “Send.” Uconnect® Phone will prompt you to say the name or number of the person you wish to send the message to. List of Preset Messages: 1. Y es. 2. No. 3. Where are you? 4.
T urn V oice T ext Reply Incoming Announcement ON/ OFF T urning the V oice T ext Reply Incoming Announcement OFF will stop the system from announcing the new incoming messages. • Press the button. • After the “Ready” prompt and the following beep, say “Setup, Incoming Message Announcement,” you will then be given a choice to change it.
3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 177 I n f o r m a t i o n P r o v i d e d b y :.
178 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 179 I n f o r m a t i o n P r o v i d e d b y :.
V oice Commands Primary Alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location V oice Commands Primary Alternate (s) all call cancel confirmation prom.
V oice Commands Primary Alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book V oice Commands Primary .
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
W ARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. Y our at- tention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.
T o hear the first available Menu, press the V oice Com- mand button and say “Help” or “Main Menu.” Commands The V oice Command system understands two types of commands, Universal commands and Local commands. Universal commands are available at all times.
Radio AM T o switch to the AM band, say “AM” or “Radio AM.” In this mode, you may say the following commands: • “Frequency #” (to change the frequency) • “Next Station” (to select .
Disc Mode T o switch to the disc mode, say “Disc.” In this mode, you may say the following commands: • “T rack” (#) (to change the track) • “Next T rack” (to play the next track) • “Previous T rack” (to play the previous track) • “Main Menu” (to switch to the main menu) USB Mode T o switch to USB mode, say “USB.
– “Continue” (to continue recording) – “Delete” (to delete the recording) • “Play Memos” (to play pr eviously recor ded memos) — During the playback you may pr ess the V oice Com- mand button to stop playing memos.
V oice T raining For users experiencing difficulty with the system recog- nizing their voice commands or numbers the Uconnect® V oice “V oice T raining” feature may be used. 1. Press the V oice Command button, say “System Setup” and once you are in that menu then say “V oice T raining.
Power Seats — If Equipped Some models may be equipped with eight-way power seats for the driver and front passenger . The power seat switches are located on the outboard side of the seat. The switches control the movement of the seat cushion and the seatback.
W ARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
T ilting The Seat Up Or Down The angle of the seat cushion can be adjusted in four directions. Pull upward or push downward on the front or rear of the seat switch, the front or rear of the seat cushion will move in the direction of the switch. Release the switch when the desired position has been reached.
CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’ s path. Power Lumbar — If Equipped V ehicles equipped with power driver or passenger seats may also be equipped with power lumbar .
Heated Seats — If Equipped On some models, the front and rear seats may be equipped with heaters located in the seat cushions. W ARNING! • Persons who are unable to feel pain to the skin because o.
Y ou can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. T wo indicator lights will illuminate for HIGH, one for LOW and none for OFF . Press the switch once to select HIGH-level heating.
Y ou can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. T wo indicator lights will illuminate for HIGH, one for LOW and none for OFF . Press the switch once to select HIGH-level heating.
While sitting in the seat, pull up on the handle and slide the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressur e, move forward and rearward on the seat to be sure that the seat adjusters have latched.
T o recline, lean forward slightly , lift the lever , then push back to the desir ed position and release the lever . Lean forward and lift the lever to return the seatback to its normal position. Using body pressur e, lean forward and rearwar d on the seat to be sure the seatback has latched.
When AHRs deploy during a rear impact, the front half of the head restraint extends forwar d to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts.
For comfort the Active Head Restraints can be tilted forward and rearwar d. T o tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearwar d on the bottom of the head restraint to move the head r estraint away fr om your head.
NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only . If either of the head restraints require removal, see your autho- rized dealer .
Head Restraints — Second Row Bench If your vehicle is equipped with a second r ow bench seat, the head restraints are not adjustable. Head Restraints — Third Row The head r estraint in the center position can be raised and lowered for tether routing.
NOTE: Seat will not stow in the storage bin unless the armrests are raised. 4. Slide the storage bin locking mechanism to the “LOCK” position and then pull up on the storage bin latch to open the cover . 5. Pull upward on the seatback recliner lever located on the outboard side of the seat.
The non-adjustable head restraint and seatback will fold automatically during the seat tumble. No additional actuation is necessary . Non-Adjustable Head Restraint Automatic Folding Seatback 3 UNDERST.
The seat will automatically tumble into position for easy storage. 6. Push the seat into the storage bin. 7. Close the storage bin cover . CAUTION! The storage bin cover must be locked and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover .
W ARNING! In a collision, serious injury could result if the seat storage bin covers are not properly latched. • Do not drive the vehicle with the storage bin covers open. • Keep the storage bin covers closed and latched while the vehicle is in motion.
Stow ’n Go® Seat — Folded And Latched Position T o tumble or stow the seat from the folded and latched position: return the seatback and head restraint to the upright position. Then pull up on the seatback r ecliner lever on the outboard side of the seat to fold head r est and seatback and tumble seat forward.
2. Return the head restraint to the upright position. 3. Pull up on the seatback recliner lever on the outboard side of the seat to fold head rest and seatback and tumble seat forward. Easy Entry Second Row The second r ow Stow ’n Go® seats allow easy entry to the third row seat or rear cargo area.
The seat will automatically fold into position for easy entry into the third row . W ARNING! In the event of a collision you could be injured if the seat is not fully latched. Quad Seats — If Equipped Both Quad seats are adjustable forward or rearwar d.
W ARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Fold-Flat T o fold the seat, lift the recliner lever to the full upward position and push the seatback forward until it rests on the seat cushion. Easy Entry The Quad seats can be tilted forward for easy entry into the thir d r ow .
For passengers seated in the third row , there is a pull strap located on the outboard side of the seat near the bottom of the seat back. Thir d r ow passengers can pull on the strap and push the Quad seat forward for folding the seatback and accessing the easy entry lever .
Second Row Bench Seat — If Equipped While the bench seat does not stow in the floor , it is removable for added cargo space. Release levers ar e located on the r ear leg assemblies, near the floor . T o remove the seat, squeeze each r elease handle and rotate downwards to deploy the wheels.
T o reinstall the seat, align the seat into the detent posi- tions on the floor . Squeeze the release handle and rotate upward until the lock indicator button returns into the handle. W ARNING! If not properly latched, the bench seats could become loose.
NOTE: Lower the head restraint by pulling on the release strap marked “1” located on the outboard side of the head restraint. The switch is only functional when the liftgate is open and the vehicle is in P ARK. The rear switch bank allows multiple power folding and unfolding positions for the third row seats.
NOTE: • Disconnect the center shoulder belt from the small buckle and lower the head restraints before attempting to fold/stow the power third row seats. • T o abort seat operation while seat is in motion, press a differ ent seat position selector switch to stop the seat.
Manually Folding Third Row Seats — If Equipped 1. Lower the center head restraint down to the seatback by pushing the button on the guide and pushing the head restraint down. 2. Lower the outboard head restraints by pulling on the release strap marked “1” located on the outboard side of the head restraint.
3. Pull r elease strap marked “2” located on the r ear of the seat to lower the seatback. 4. Pull release strap marked “3” to release the anchors.
5. Pull release strap marked “4” and tumble the seat rearwar d into the storage bin. Release Strap “4” Stowed Third Row Seat 218 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i .
T o Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch. 2. Pull release strap marked “2” to unlock the recliner . 3. Pulling strap “4” releases the seatback to return to its full upright position.
Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats.
Setting Memory Positions And Linking RKE T ransmitter T o Memory NOTE: Each time the SET (S) button and a numbered button (1 or 2) is pr essed, you erase the memory settings for that button and store a new one. 1. Insert the ignition key and turn the ignition switch to the ON position.
1 1. Repeat the above steps to set the next Memory position using the other number ed Memory button or to link another RKE transmitter to memory . Memory Position Recall NOTE: The vehicle must be in P ARK to recall memory positions. If a recall is attempted when the vehicle is not in P ARK, a message will be displayed in the EVIC.
T o disable another RKE transmitter linked to either Memory Position, repeat Steps 1 to 5 for each RKE transmitter . NOTE: Once programmed, all RKE transmitters linked to memory can be easily enabled or disabled at one time.
Each stored memory setting will have an associated Easy Entry and Easy Exit Position. NOTE: The Easy Entry/Easy Exit feature can be enabled or disabled through the programmable features in the Electronic V ehicle Information Center (EVIC). If your vehicle is not equipped with an EVIC, your dealership can activate/deactivate this feature for you.
Use the hood prop rod to secure the hood in the open position. CAUTION! T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 12 in (30 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. The switch controls the operation of the headlights, parking lights, instrument panel lights, interior lights and the fog lights. Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation.
Automatic Headlights — If Equipped This system automatically turns your headlights on or of f based on ambient light levels. T o turn the system on, turn the headlight switch to the extreme counter clockwise position aligning the indicator with the AUTO on the headlight switch.
When exiting the vehicle the driver can choose to have the headlights remain on for 30, 60 or 90 seconds or not remain on. T o change the timer setting, see your autho- rized dealer . The headlight delay time is pr ogrammable on vehicles equipped with an EVIC.
Front Fog Lights — If Equipped T o activate the fr ont fog lights, turn on the parking lights or the low beam headlights and push in the headlight switch control knob. Pressing the headlight switch control knob in a second time will turn the front fog lights off.
Interior Lighting On Rotate the left dimmer control completely upward to the second detent (extreme top position) to turn on the interior lights. The interior lights will r emain on when the dimmer control is in this position.
The Halo control switch is located to the right of the dimmer switch. T o activate the Halo lights, rotate the Halo switch control upward or downward to in- crease or decrease the lighting. Multifunction Lever The multifunction lever is located on the left side of the steering column.
The multifunction lever controls the: • T urn Signals • Headlight Beams Low/High • Flash-T o-Pass • Front and Rear W ipers — W asher Functions T urn Signals Move the multifunction lever up or down and the arr ows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights.
Flash-T o-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is released.
3. Push the multifunction lever away fr om you to switch the headlights to the high beam position. Refer to “Multifunction Lever” in this section for further infor - mation. NOTE: This system will not activate until the vehicle is at, or above, 25 mph (40 km/h).
WINDSHIELD WIPER AND W ASHERS The wipers and washers are operated by a switch within the multifunction lever . Rotate the end of the multifunc- tion lever to select the desired wiper speed. NOTE: Always remove any buildup of snow that pre- vents the windshield wiper blades from returning to the off position.
Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause be- tween cycles desirable. Rotate the end of the multifunc- tion lever to the first detent position, and then turn the end of the lever to select the desired delay interval.
Rear Wiper And Washer Rotating the rotary ring to the first detent activates the rear intermittent wipers. T o activate the washers, rotate the rotary ring fully forward and the washers will spray until the ring is released, and then resume the intermit- tent interval.
• The Rain Sensing feature can be turned on and off through the EVIC (if equipped). Refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr ogrammable Features)” in “Understand- ing Y our Instrument Panel” for further information.
TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column.
HEA TED STEERING WHEEL — IF EQUIPPED The steering wheel contains a heating element that helps warm your hands in cold weather . The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on it will operate for approximately 30 to 80 minutes before automatically shutting off.
V ehicles Equipped With Remote Start On models that are equipped with remote start, the heated steering wheel can be programed to come on during a remote start. Refer to “Electronic V ehicle Infor- mation Center (EVIC)” in “Understanding Y our Instru- ment Panel” for further information.
The switch is located on the left side of the steering column. Press the switch forward to move the pedals forward (toward the front of the vehicle). Press the switch rearward to move the pedals rearward (toward the driver). • The pedals can be adjusted with the ignition OFF .
NOTE: • Always adjust the pedals to a position that allows full pedal travel. • Further small adjustments may be necessary to find the best possible seat/pedal position.
The Electronic Speed Control buttons are located on the right side of the steering wheel. NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed to shut down if multiple Speed Contr ol functions are operated at the same time.
W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it.
The speed increment shown is dependant on the speed of U.S. (mph) or Metric (km/h) units: U.S. Speed (mph) • Pressing the RES (+) button once will result i na1m p h increase in set speed. Each subsequent tap of the button results in an increase of 1 mph.
Metric Speed (km/h) • Pressing the SET (-) button once will r esult in a 2 km/h decrease in set speed. Each subsequent tap of the button results in a decrease of 2 km/h. • If the button is continually pressed, the set speed will continue to decrease until the button is released, then the new set speed will be established.
P ARKSENSE® REAR P ARK ASSIST — IF EQUIPPED The ParkSense® Rear Park Assist system provides visual and audible indications of the distance between the rear fascia and a detected obstacle when backing up, e.g. during a parking maneuver . Refer to “ParkSense® Sys- tem Usage Precautions” for limitations of this system and recommendations.
The ParkSense® W arning Display is located in the Instru- ment cluster ’s EVIC display . It provides both visual and audible warnings to indicate the distance between the rear fascia/bumper and the detected obstacle. ParkSense® Display When the vehicle is in REVERSE, the warning display will turn ON indicating the system status.
The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow , to fast, to continuous.
Fast T one Continuous T one 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 251 I n f o r m a t i o n P r o v i d e d b y :.
The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an ob.
Enabling/Disabling ParkSense® ParkSense® can be enabled and disabled through the Customer-Pr ogrammable Features section of the EVIC. The available choices ar e: OFF , Sound Only , or Sound and Display .
Cleaning The ParkSense® System Clean the ParkSense® sensors with water , car wash soap and a soft cloth. Do not use rough or hard cloths. Do not scratch or poke the sensors.
object as a sensor problem, causing the “SER VICE P ARK ASSIST SYSTEM” message to be displayed in the EVIC. CAUTION! • ParkSense® is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all.
W ARNING! (Continued) • Before using ParkSense®, it is strongly recom- mended that the ball mount and hitch ball assem- bly is disconnected from the vehicle when the vehicle is not used for towing.
When displayed, static grid lines will illustrate the width of the vehicle while a dashed center -line will indicate the center of the vehicle to assist with aligning to a hitch/ receiver . The static grid lines will show separate zones that will help indicate the distance to the rear of the vehicle.
CAUTION! • T o avoid vehicle damage, ParkV iew® should only be used as a parking aid. The ParkV iew® camera is unable to view every obstacle or object in your drive path. • T o avoid vehicle damage, the vehicle must be driven slowly when using ParkV iew® to be able to stop in time when an obstacle is seen.
OVERHEAD CONSOLES Front Overhead Console T wo versions of the overhead console are available. The base front overhead console model featured fixed incan- descent courtesy/r eading lights, flip-down sunglass stor- age and conversation mirror .
Courtesy/Interior Lighting At the forwar d end of the console are two courtesy lights (standard dome light has two buttons). The lights turn on when a front door , a sliding door or the liftgate is opened.
The door will slowly rotate to the full open position. From this position, the door can be fully closed or , by rotating upward about 3/4 of the way and releasing, positioned for conversation mirror use. NOTE: From the “conversation mirror” position, the door can only be closed.
Rear Courtesy/Reading Lights — If Equipped The overhead console has two sets of courtesy lights. The lights turn on when a fr ont door , a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pressed.
Rear Console Halo Lighting The r ear overhead console has r ecessed halo lighting around the perimeter of the console base. This feature provides additional lighting options while traveling and is controlled by the headlight switch.
The HomeLink® buttons, located on either the overhead console, headliner or sunvisor , designate the three differ - ent HomeLink® channels. The HomeLink® indicator is located above the center button. NOTE: HomeLink® is disabled when the V ehicle Secu- rity Alarm is active.
Before Y ou Begin Programming HomeLink® Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio.
1. Cycle the ignition to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to pr o- gram while keeping the HomeLink® indicator light in view . 3. Simultaneously press and hold both the HomeLink® button you want to program and the hand-held trans- mitter button.
Firmly press and release the “LEARN” or “TRAIN- ING” button. On some garage door openers/devices there may be a light that blinks when the garage door opener/device is in the LEARN/TRAIN mode. NOTE: Y ou have 30 seconds in which to initiate the next step after the LEARN button has been pressed.
2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to pr o- gram while keeping the HomeLink® indicator light in view . 3. Simultaneously press and hold both the Homelink® button you want to program and the hand-held trans- mitter button.
Canadian/Gate Operator Programming For programming transmitters in Canada/United States that requir e the transmitter signals to “time-out” after several seconds of transmission.
If you unplugged the garage door opener/device for programming, plug it back in at this time. Reprogramming A Single HomeLink® Button T o repr ogram a channel that has been previously trained, follow these steps: 1. Cycle the ignition to the ON/RUN position.
T roubleshooting Tips If you are having trouble programming HomeLink®, here are some of the most common solutions: • Replace the battery in the original hand-held transmitter . • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code.
General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause unde- sired operation.
W ARNING! • Never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter -N-Go™ in the ACC or ON/RUN mode.
movement. The sunroof and sunshade will remain in a partially opened condition until the switch is pushed and held rearward again. Closing Sunroof — Express Press the switch forwar d and r elease it within one-half second and the sunr oof will close automatically fr om any position.
Sunshade Operation The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears.
ELECTRICAL POWER OUTLETS — IF EQUIPPED T wo 12 V olt (13 Amp) power outlets are located on the lower instrument panel, below the open storage bin. The driver-side power outlet is controlled by the ignition switch and the passenger-side power outlet is connected directly to the battery .
CAUTION! • Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts. If the 160 W att (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. • Power outlets are designed for accessory plugs only . Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse.
On vehicles equipped with the Super Console the power outlets are located under the retractable cover . T o access the power outlets push down on the cover and slide it toward the instrument panel. The outlet in the rear quarter panel near the liftgate and the upper outlet in the instrument panel are both con- trolled by the ignition switch.
W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
The power inverter switch is located on the instrument panel below the climate controls. T o turn on the power outlet, press the switch once. Press the switch a second time to turn the power outlet off. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 W atts.
W ARNING! T o avoid serious injury or death: • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled, it may cause an electric shock and failure. CUPHOLDERS There are cupholders located throughout the interior .
variety of container types and sizes. Press down on the container to engage the cupholder retention features. Super Console — If Equipped On models equipped with the Super Console, ther e are two cupholders located in the center of the console.
Premium Console Cupholders — If Equipped On models equipped with premium center consoles, there ar e four cupholders located on the top of the console.
T wo outboard mesh pockets are on intermediate seating. The mesh pockets ar e flexible enough to hold juice boxes, toys, games or MP3 players, etc. Smoker’s Package Kit — If Equipped W ith the opt.
Upper Glove Compartment T o open the upper compartment, press in on the button, located on the left side of the upper door . The door will automatically open. T o close the compartment door , push downward on the door ’s surface to latch the door closed.
Door T rim Panel Storage Front Door Storage Both interior front door panels have multiple pockets for storage. W ARNING! If containers of hot liquid are placed in the bottle holder , they can spill when the door is closed, burn- ing the occupants. Be careful when closing the doors to avoid injury .
Umbrella Holder An umbrella holder has been conveniently molded into the left front door entry scuff molding. Second Row Floor Storage Bins The ar ea below the floor covers, located in front of the second row seats, is available for storage. Pull up on the storage bin latch to open the cover .
CAUTION! The storage bin cover must lay flat and be locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover . W ARNING! In a collision, serious injury could result if the seat storage bin covers are not properly latched.
W ARNING! (Continued) • Do not operate the storage bin covers while the vehicle is in motion. • Do not use a storage bin latch as a tie down. CAUTION! The storage bin cover must be flat and locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover .
NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pushing on the glow-in-the-dark lever attached to the storage bin cover latching mecha- nism. Center And Rear Overhead Console Storage — If Equipped The overhead storage system comes in several options.
Coat Hooks Coat hooks ar e located along the headliner for the second and third r ow seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the recommended load limit can cause the coat hooks to break or disengage from the vehicle.
CONSOLE FEA TURES There are three consoles available: Basic, Premium and Super . W ARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision.
3. Align the console until the front anchor cup plug hole is centered on the winch hole. 4. Reinstall the clip first and then while pushing down- ward on the console with slight pressur e, reinstall the cover plug. 5. Pull up on the console to be sure it is firmly latched.
• Multiple adjustments • Removable from vehicle for additional floor space The top and center console sections slide forward and rearwar d to pr ovide added user comfort. A one-piece cup holder insert for both cavities can easily be removed for cleaning.
Position 2 shows the raised storage tray revealing a large storage area below . Dual Storage Bins Position 3 shows the top portion of the console in a rearwar d position. This is accomplished by lifting the upper most latch at the fr ont of the console.
Position 4 shows the complete console in its rearmost position. Again, lifting second latch handle at the front of the console, allows complete access to a lower storage bin and provides additional cupholders for rear passengers. T o Remove The Premium Floor Console 1.
W ARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched. Super Console — If Equipped The Super Console contains multiple storage areas, front lower pass through, top forward bin, top rearward bin and rear pull out drawer .
NOTE: The front cupholder light ring and pass through lighting is controlled by a dimming switch located on the instrument panel, refer to “Lights” in “Understanding The Features Of Y our V ehicle” for further information. Located in the back of the super console is a storage drawer and cupholders for the rear passengers.
CARGO AREA FEA TURES Rechargeable Flashlight The rechar geable flashlight is mounted on the right side of the cargo area. The flashlight snaps out of the bezel when needed.
T o operate the flashlight, press the switch once for high, twice for low , and a third time to return to off. REAR WINDOW FEA TURES Rear Window Defroster The r ear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped).
CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
vehicle. Be sure the total load of cargo inside the vehicle plus that on the external rack does not exceed the maximum vehicle load capacity . The cr ossbars and side rails are designed to carry weight on vehicles equipped with a luggage rack.
Deploying The Crossbars T o deploy the crossbars, completely loosen the thumb screws at both ends of the crossbar and lift the crossbar from its stowed position in the side rail. Repeat with crossbar on the opposite side. CAUTION! Use care when removing and handling the crossbars to prevent damage to the vehicle.
Then, position the crossbars across the roof. NOTE: The crossbars are identical and can be placed in any two of the three deploy positions. Deployed Position Deploy Positions – Choose T wo Of Three .
Make sure the directional arrows on the crossbars align with the dir ectional arrows on the side rails. Set the crossbars into the deployed positions. Once the crossbars are set into position, tighten the thumb screws completely .
NOTE: Load should always be secur ed to crossbars first, with rail tie down loops used as additional securing points if needed. T ie loops ar e intended as supplemen- tary tie down points only . Do not use ratcheting mecha- nisms with the tie loops. CAUTION! • Check deployed crossbars frequently and retighten thumb screws as necessary .
CAUTION! (Continued) • Long loads which extend over the windshield, such as wood panels or surfboards, or loads with large frontal area should be secured to both the front and rear of the vehicle. • T ravel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack.
Gently pull up on the tab to raise the sun screen. Continue pulling the sun screen until the tab is near the top of the window . Once the screen is completely to the top of the window , extend the top bar of the sun screen over the two hooks attached to the top of the window .
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 INSTRUMENT P ANEL FEA TURES ......... .316 䡵 INSTRUMENT CLUSTER — BASE ......... .317 䡵 INSTRUMENT CLUSTER — PREMIUM ...... .318 䡵 INSTRUMENT CLUSTER DESCRIPTIONS .... .319 䡵 ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) — IF EQUIPPED .
▫ Units ............................. .346 ▫ V ehicle Info (Customer Information Features) . . .346 ▫ Messages # ......................... .347 ▫ Keyless Enter-N-Go™ Display — If Equipped . . . .347 ▫ Compass / T emperature Display .....
▫ Operating Instructions (Uconnect® Phone) — If Equipped .......................... .381 䡵 SETTING THE ANALOG CLOCK .......... .382 䡵 iPod®/USB/MP3 CONTROL — IF EQUIPPED . .382 ▫ Connecting The iPod® Or External USB Device .............
▫ VES™ Remote Control — If Equipped ...... .407 ▫ Blu-ray™ Player Remote Control — If Equipped .......................... .410 ▫ Remote Control Storage ................ .412 ▫ Locking The Remote Control ............ .413 ▫ Replacing The Remote Control Batteries .
䡵 CD/DVD/Blu-ray™ Disc MAINTENANCE . . . .436 䡵 RADIO OPERA TION AND MOBILE PHONES . .437 䡵 CLIMA TE CONTROLS .................. .437 ▫ Manual Heating And Air Conditioning System — If Equipped ........................ .437 ▫ Rear Manual Climate Control — If Equipped .
INSTRUMENT P ANEL FEA TURES 1 — Air V ents 5 — Analog Clock 9 — DVD – If Equipped 13 — Ignition Switch 2 — Instrument Cluster 6 — Upper Glove Compartment 10 — Storage Bin 14 — Hood R.
INSTRUMENT CLUSTER — BASE 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 317 I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER — PREMIUM 318 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTIONS 1. T achometer This gauge measures engine revolutions per minute (RPM x 1000). Before the pointer reaches the red area, ease up on the accelerator to prevent engine damage. 2. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on.
U.S. Federal r egulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repair ed or serviced, the repair technician should leave the odometer reading the same as it was befor e the r epair or service.
NOTE: Some of the above warnings will be displayed in the Electronic V ehicle Information Center Display Area located in the instrument cluster . Refer to ”Electr onic V ehicle Information Center (EVIC) Display — If Equipped” for further information.
position. T o reset the oil change indicator system (after performing the scheduled maintenance), perform the following steps. 1. T urn the ignition switch to the ON/RUN position (do not start the engine). 2. Fully depress the accelerator pedal, slowly , three times within 10 seconds.
8. T ire Pressure Monitoring T elltale Light — If Equipped Each tire, including the spare (if provided), should be checked monthly when cold and in- flated to the inflation pressur e recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle, to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly . CAUTION! The TPMS has been optimized for the original equipment tires and wheels.
CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and driveability . If the MIL is flashing, severe catalytic converter damage and power loss will soon occur .
NOTE: • The “ESC Of f Indicator Light” and the “ESC Activation/Malfunction Indicator Light” come on momentarily each time the ignition switch is turned to ON/RUN. • Each time the ignition is turned to ON/RUN, the ESC system will be ON, even if it was turned off previously .
dealer as soon as possible. Refer to “Occupant Restraints” in “Things T o Know Before Starting Y our V ehicle” for further information. 16. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrument cluster . It displays the gear position of the automatic transmission.
In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster , the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during each stop.
The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN posi- tion. NOTE: This light shows only that the parking brake is applied.
W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer for service if your vehicle overheats. If you decide to look under the hood yourself, see “Maintaining Y our V ehicle”.
Do not operate the vehicle until the cause is corrected. This light does not indicate how much oil is in the engine. The engine oil level must be checked under the hood. 24. Engine T emperature W arning Light This light warns of an overheated engine condi- tion.
26. T ransmission T emperature W arning Light During sustained high speed driving or trailer towing up long grades on hot days, the auto- matic transmission oil may become too hot. When the transmission overheat warning light turns on, you will experience reduced vehicle perfor - mance until the automatic transmission cools down.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) — IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver-interactive display that is located in the instrument cluster .
The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: • UP Button Press and release the UP button to scroll up- ward through the main menu items (Fuel Economy , V ehicle Info, T ire PSI, Cruise, Mes- sages, Units, System Setup).
Once the RIGHT button has been selected for the desired submenu list, follow the EVIC prompts to properly select the desired sub- menu EVIC features • BACK Button Press the BACK button to scroll back to a previous menu or sub-menu. Electronic V ehicle Information Center (EVIC) Displays The EVIC display consists of three sections: 1.
• Unstored Messages This message type is displayed indefinitely or until the condition that activated the message is clear ed. Examples of this message type are ⬙ T urn Signal On ⬙ (if a turn signal is left on) and ⬙ Lights On ⬙ (if driver leaves the vehicle).
W rong Key Damaged Key Key not programmed V ehicle Not in Park Key Left V ehicle Key Not Detected Press Brake Pedal and Push Button to Start Liftgate Ajar (chime will sound when vehicle starts moving).
Blind Spot System Off — This message is displayed when the ignition is turned to ON to indicate the Blind Spot System has been turned off. Blind Spot System Not A vailable — This message is displa.
• Electronic Speed Control SET This light will turn on when the electronic speed contr ol is SET . For further information, refer to “Electronic Speed Control” in “Under- standing The Features Of Y our V ehicle.” EVIC Amber T elltale Lights This area will show reconfigurable amber caution tell- tales.
EVIC Red T elltale Lights This area will show reconfigurable red telltales. These telltales include: • Door Ajar This light will turn on to indicate that one or more doors may be ajar . • Oil Pressure W arning Light This light indicates low engine oil pr essure.
• Electronic Throttle Control (ETC) Light This light informs you of a pr oblem with the Electronic Throttle Control (ETC) system. The light will come on when the ignition is first turned ON and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an authorized dealer .
• T ransmission T emperature W arning Light This light indicates that the transmission fluid temperature is running hot. This may occur with sever e usage, such as trailer towing. If this light turns on, safely pull over and stop the vehicle. Then, shift the transmission into NEUTRAL and run the engine at idle or faster until the light turns off.
Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position or cycle the ignition to the ON/RUN position if equipped with Keyless Enter-N-Go™. T o turn off the message temporarily , press and release the MENU but- ton.
• Distance T o Empty (DTE) • Miles Per Gallon (MPG) A verage Fuel Economy Shows the average fuel economy since the last reset. The A verage Fuel Economy can be r eset by following the prompt in the EVIC to use the SELECT button. When the fuel economy is reset, the display will r ead “zero” for two seconds.
NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regar dless of the DTE displayed value. When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a “LOW FUEL” message.
T rip B Shows the total distance traveled for T rip B since the last reset. Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON or ST AR T position.
• Coolant T emp Displays the actual coolant temperature. • Oil T emp Displays the actual oil temperature. • Oil Pressure Displays the actual oil pressure. • T railer Brake — If Equipped Displays trailer brake output power and trailer brake status indicator .
Compass / T emperature Display The compass readings indicate the direction the vehicle is facing. The EVIC will display one of eight compass readings and the outside temperature.
4. Press and release the SELECT button to start the calibration. The “CAL” indicator will be displayed in the EVIC. 5. Complete one or more 360–degree turns (in an area free from lar ge metal or metallic objects) until the “CAL” indicator turns of f.
1. T urn the ignition switch ON. 2. Press the UP or DOWN button until the Setup (Customer-Pr ogrammable Features) menu is reached, then press the SELECT button. 3. Press the DOWN button until the “Compass V ariance” message is displayed in the EVIC, then press the SELECT button.
through the language choices. Press the SELECT button to select English, Spanish (Español), French (Français). Then, as you continue, the information will display in the selected language.
T o make your selection, press and release the RIGHT arrow button until a check-mark appears next to the feature showing the system has been activated or the check-mark is removed showing the system has been deactivated.
Flash Lamps W ith Lock When selected, the front and rear turn signals will flash when the doors are locked with the RKE transmitter . T o make your selection, press and release the RIGHT arrow button .
NOTE: T urning the headlights on during the daytime causes the instrument panel lights to dim. T o increase the brightness, refer to “Lights” in “Understanding The Features Of Y our V ehicle.
Flashers With Sliding Door When this feature is selected the signal lamps activate when power or manual sliding doors are in operation, signaling other drivers that someone may be exiting or entering the vehicle.
Uconnect® 730N/430/430N CD/DVD/HDD/NA V — IF EQUIPPED Refer to your Uconnect® Supplement Manual for de- tailed operating instructions. Operating Instructions (V oice Command System) — If Equipped Refer to “V oice Command” for further details.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME contr ol knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns continuously (360 degrees) in either direction, without stopping.
R W/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to incr ease or counter clockwise to decr ease the frequency .
SET/RND Button — T o Set The Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and release that button.
Operation Instructions — CD MODE For CD And MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (C.
EJECT Button — Ejecting A CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF .
SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track.
• Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name, and will assign a number instead. W ith a maximum number of files, exceeding 20 folders will result in this display .
MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags.
Operation Instructions — Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or iPod®, and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers.
Power Switch/V olume Control (Rotary) Push the ON/VOLUME contr ol knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns continuously (360 degrees) in either direction, without stopping.
Phone Button Uconnect® Phone — If Equipped Press this button to operate the Uconnect® Phone featur e (if equipped). Refer to “Uconnect® Phone” for further details. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith Uconnect Phone” message will display on the radio screen.
INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast from an FM station (FM mode only). R W/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows.
MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pr essing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently broadcast Music T ype information.
Program T ype 16-Digit Character Display Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
button. The symbol SET 1 will now show in the display window . Select the button (1–6) you wish to lock onto this station and pr ess and r elease that button. If a button is not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not be stored into pushbutton memory .
Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than 1.
EJECT Button — Ejecting A CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF .
SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track.
• Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ⬙ . ⬙ and a three- character extension) Multisession disc formats are supported by the radio.
ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pro files are not supported. Playback Of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium.
INFO Button — CD Mode For MP3 Play Pressing the INFO button repeatedly will scroll through the following T AG information: Song T itle, Artist, File Name, and Folder Name (if available). Press the INFO button once more to return to ⬙ elapsed time ⬙ priority mode.
NOTE: Sirius service is not available in Hawaii and has limited coverage in Alaska. System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle.
Satellite Antenna T o ensure optimum reception, do not place items on the roof around the rooftop antenna location. Metal objects placed within the line of sight of the antenna will cause decreased performance. Lar ger luggage items such as bikes should be placed as far rearward as possible, within the loading design of the rack.
SCAN Button Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds befor e con- tinuing to the next. T o stop the search, press the SCAN button a second time. INFO Button Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avail- able).
SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription.
SETTING THE ANALOG CLOCK T o set the analog clock at the top center of the instrument panel, press and hold the button until the setting is correct. iPod®/USB/MP3 CONTROL — IF EQUIPPED NOTE: This section is for Uconnect® 130/230 radios only .
NOTE: • If the radio has a USB port, refer to the appr opriate Uconnect® Multimedia radio User ’s Manual for iPod® or external USB device support capability .
NOTE: The glove compartment will have a position where the iPod® or consumer electronic audio device cable can be routed through without damaging the cable when closing the lid. This allows routing of the cable without damaging it while closing the lid.
Controlling The iPod® Or External USB Device Using Radio Buttons T o get into the iPod®/USB/MP3 contr ol mode and access a connected audio device, either press the “AUX” button on the radio faceplate or press the VR button and say ⬙ USB ⬙ or ⬙ Switch to USB.
• Use the << SEEK and SEEK >> buttons to jump to the previous or next track. Pressing the SEEK >> button during play mode will jump to the next track in the list, or press the VR button and say ⬙ Next or Previous T rack.
List Or Browse Mode During Play mode, pressing any of the buttons described below , will bring up List mode. List mode enables scrolling through the list of menus and tracks on the audio device. • TUNE control knob: The TUNE control knob functions in a similar manner as the scroll wheel on the audio device or external USB device.
• Pressing a PRESET button will display the current list on the top line and the first item in that list on the second line. • T o exit List mode without selecting a track, press the same PRESET button again to go back to Play mode . • LIST button: The LIST button will display the top level menu of the iPod® or external USB device.
Bluetooth® Streaming Audio (BTSA) Music can be streamed from your cellular phone to the Uconnect® phone system. Controlling BTSA Using Radio Buttons T o enter BTSA mode, press either “AUX” button on the radio or press the VR button and say “Bluetooth Stream- ing Audio.
Browse Browsing is not available on a Bluetooth® Str eaming Audio (BTSA) device. Only the current song that is playing will display info. Uconnect® MUL TIMEDIA — VIDEO ENTERT AINMENT SYSTEM (VES™) — IF EQUIPPED Y our rear seat V ideo Entertainment System (VES™) is designed to give your family years of enjoyment.
• Y our vehicle may be equipped with either a standard DVD player or a Blu-ray™ Disc Player . If equipped with a Blu-ray™ Disc Player , the icon will be present on the Player . • T urn on the Player (if equipped on Dual Screen Sys- tem) by pushing the Power button, located on the far left, or by pressing the button on the Remote Control.
• T ouch the 1 soft-key to select an audio channel, then touch the VES™ Disc soft-key in the media column. Using The Remote Control • Select an audio channel (Channel 1 for 2nd row screen and Channel 2 for 3r d r ow screen), then pr ess the source key and select VES™ Disc from the menu.
When connecting an external sour ce to the AUX input, be sure to follow the standar d color coding for the VES™ jacks: NOTE: Certain high-end video games, such as Playsta- tion3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter .
Using The Remote Control 1. Press the MODE button on the Remote Control. 2. While looking at the video screen, highlight VES™ AUX 1, by either pressing Up/Down/Left/Right but- tons or by repeatedly pr essing the MODE button, then press ENTER on the Remote Control.
3. T ouch the 1 soft-key and then touch either AUX 1 or AUX 2 in the VES™ column (depending which AUX input is used). T o exit press the back arrow soft-key at the top of the screen. Listen T o An Audio Source On Channel 2 While A Video Is Playing On Channel 1 Ensure the Remote Control and Headphone switch is on Channel 2.
2. While looking at the video scr een, either press Up/ Down/Left/Right on the Remote Control to highlight the desired audio source or repeatedly press the SOURCE button on the remote until the desir ed audio source appears on the screen. Using The T ouchscreen Radio Controls 1.
3. T o listen to an audio source on Channel 2 while a video is playing on Channel 1, touch the 2 soft-key and choose an audio source. T o exit touch the back arrow soft-key at the top left of the left screen. Dual Video Screen NOTE: T ypically there ar e two different ways to operate the features of the V ideo Entertainment System (VES™).
3. T o watch a DVD on Screen 1 for second row passen- gers, ensure the Remote Control and Headphone switch is on Channel 1. 4. T o watch a DVD on Screen 2 for third row passengers, ensure the Remote Control and Headphone switch is on Channel 2. Using The Remote Control 1.
Using The T ouchscreen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. T ouch the Rear VES™ soft-key to display the Rear VES™ Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES™ Controls screen.
Play A DVD Using The VES™ Player — If Equipped 1. Insert the DVD with the label facing up. The VES™ player automatically selects the appropriate mode after the disc is recognized and starts playing the DVD. NOTE: The VES™ player has basic DVD contr ol func- tion such as Menu, Play , Pause, FF , RW and Stop.
NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. • Channel/Screen 2 select mode information is shown on the right side of the screen. • The VES™ will retain the last setting when turned off. Using The T ouchscreen Radio Controls 1.
3. T ouch the 1 or 2 soft-key and then the DISC soft-key in the VES™ column. T o exit touch the back arrow soft-key at the top left of the screen. NOTE: • T o view a DVD on the radio pr ess the RADIO/MEDIA hard-key , on the radio faceplate, then touch the DISC tab soft-key and then the VIEW VIDEO soft-key .
NOTE: The Blu-ray™ Player has basic control functions such as Menu, Play , Pause, FF , RW and Stop. 2. T o watch a Blu-ray™ Disc on Screen 1 for second row passengers, ensure the Remote Contr ol and Head- phone switch is on Channel 1.
NOTE: • T o view a Blu-ray™ Disc on the radio press the RADIO/MEDIA hard-key , on the radio faceplate, then touch the VES™ Disc tab soft-key and then the VIEW VIDEO soft-key . • V iewing a Blu-ray™ Disc on the T ouchscreen radio screen is not available in all states/provinces.
Using The T ouchscreen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. T ouch the Rear VES™ soft-key to display the Rear VES™ Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES™ Controls screen.
3. T o listen to an audio source on Channel 2 while a video is playing on Channel 1, touch the 2 soft-key and choose an audio source. T o exit touch the back arrow soft-key at the top left of the left screen. Important Notes For Dual Video Screen System • VES™ is able to transmit two channels of stereo audio and video simultaneously .
• Selecting a video source on Channel 2, the video source will display on the third row screen or Screen 2 and can be heard on Channel 2. • The 2nd row screen and 3rd row screen of the V ideo Entertainment System can play two separate discs by utilizing the touchscreen radio DVD player and Blu- ray™ Disc Player .
2. Channel Selector Indicators – When a button is pressed, the currently affected channel or channel button is illuminated momentarily . 3. Light – T urns the remote control backlighting on or of f. The remote backlighting turns off automatically after five seconds.
listening to a disc in a radio with a multiple-disc changer , PROG Up selects the next disc and PROG Down selects the previous disc. 1 1. MUTE – Press to mute the headphone audio output for the selected channel. 12. SLOW – If Equipped – Press to slow playback of a DVD disc.
Blu-ray™ Player Remote Control — If Equipped Controls And Indicators 1. Power – T urns the screen and wireless headphone transmitter for the selected Channel on or off. T o hear audio while the screen is closed, press the Power button to turn the headphone transmitter on.
6. SETUP – Press to access the Blu-ray™ Setup menu screen. When a disc is loaded in the Blu-ray™ player (if equipped) and the VES™ mode is selected and the disc is stopped, press the SETUP button to access the Blu-ray™ Setup menu. 7. 䉴䉴 – Press and release to jump to the next available audio track or video chapter .
Remote Control Storage The video scr een(s) come with a built in storage compart- ment for the remote control which is accessible when the screen is opened. T o remove the remote, use your index finger to pull and rotate the remote towar ds you. Do not try to pull the remote straight down as it will be very difficult to remove.
Locking The Remote Control All r emote contr ol functionality can be disabled as a parental control feature. • T o disable the Remote Control from making any changes, press the V ideo Lock button on the DVD player (if equipped). If the vehicle is not equipped with a DVD player , follow the radio’s instructions to turn V ideo Lock on.
Blu-ray™ Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for themselves.
Controls The headphone power indicator and controls are located on the right ear cup. NOTE: The rear video system must be turned on before sound can be heard from the headphones. T o conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video system is turned off.
NOTE: • When both switches are on Channel 1, the Remote is controlling Channel 1 and the headphones are tuned to the audio of the VES™ Channel 1. • When both switches are on Channel 2, the Remote is controlling Channel 2 and the headphones are tuned to the audio of the VES™ Channel 2.
How Long Does The Coverage Last? This warranty lasts as long as you own the Product. What Does This W arranty Cover? Except as specified below , this warranty covers any Product that in normal use is defective in workmanship or materials.
System Information Shared Modes This allows the VES™ to output radio sources to the headphones and the radio to output VES™ sour ces to the vehicle speakers.
Information Mode Display 1. Channel 1 Mode 2. Channel 1 Shared Status 3. Channel 1 Audio Only/Mute 4. Channel 2 Mode 5. Channel 2 Shared Status 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER/OK Button Action 8. Channel 2 ENTER/OK Button Action 9. Clock 10.
Numeric Keypad Menu When the display for either Channel 1 or Channel 2 shows DIRECT TUNE, pressing the remote control’s OK button activates a numeric keypad menu. This screen makes it easy to enter a specific tuner frequency , satellite channel, or track number .
Disc Menu When listening to a CD Audio or CD Data disc, pressing the remote control’s POP UP/MENU button displays a list of all commands which control playback of the disc. Using the options you can activate or cancel Scan play and Random play . Display Settings When watching a video source (DVD V ideo with the disc in Play mode, Aux V ideo, etc.
Listening T o Audio With The Screen Closed T o listen to only audio portion of the channel with the screen closed: • Set the audio to the desired source and channel. • Close the video screen. • T o change the current audio mode, press the remote control’s MODE button.
• CD: CD-DA, VCD, CD-TEXT • DVD/CD: MP3, WMA, AAC, DivX (version s3–6 ) profile 3.0 Compressed V ideo Files (DivX) The Blu-Ray™ Player is capable of playing DivX files from a CD disc (usually a CD-R, CD-R W) or a DVD disc (usually a DVD-R, DVD+R, DVD-RW or DVD+RW).
DVD/Blu-ray™/BD Region Codes The DVD player/Blu-ray™ Player and many DVD/Blu- ray™ Discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD/Blu-ray™ Disc does not match the region code for the player , the disc will stop playing and a warning will be displayed.
• For CD Data (or CD-ROM) discs, always use the ISO-9660 (Level 1 or Level 2), Joliet, or Romeo format. Other formats (such as HFS, or others) are not sup- ported. • Blu-ray™ Disc Player can extend 2000 files and 255 folders. • The player recognizes a maximum of 512 files and 99 folders per CD-R and CD-RW disc.
• For MP3 files, only version 1 ID3 tag data (such as artist name, track title, album, etc.) are supported. • For Blu-ray™ files, only version 1.0 / 1.1 / 2.2 / 2.3 and 2.4 ID3 tag data (such as artist name, track title, album, etc.) are supported.
skipping forward 1.0 to 3.0 seconds at a time. If the end of the disc is reached, the DVD player will return to the beginning of the disc and attempt to play the start of the first track. The DVD player may shut down during extremely hot conditions, such as when the vehicle’s interior tempera- ture is above 120° F (49° C).
All of the Language settings have a special ⬙ Other ⬙ setting to accommodate languages other than Japanese or English. These languages are selected using a special four-digit code.
Rating And Password Setup The Rating and Password settings work together to control the types of DVDs that your family watches. Most DVD- V ideo discs have a rating (from 1 to 8) assigned to them where lower numbers are designated for all audiences and higher numbers are designated for more adult audiences.
T o set the password, activate the DVD Setup Menu and follow these additional instructions: • Using the remote control Left and Right cursor but- tons, select the Rating tab. • Highlight ⬙ Change Password ⬙ , and then press the remote control’s ENTER/OK button.
T o set the rating, activate the DVD Setup Menu and follow these additional instructions: • Using the remote control’s Left and Right cursor buttons, select the Rating tab. • Highlight ⬙ Change Rating ⬙ , and then press the remote control’s ENTER/OK button.
• THIS PRODUCT IS LICENSED UNDER THE A VC P A TENT POR TFOLIO LICENSE FOR THE PER- SONAL AND NON-COMMERCIAL USE OF A CON- SUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE A VC ST ANDARD ( ⬙ A VC V.
Center at http://www .cinavia.com. T o request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center , P .O. Box 86851, San Diego, CA, 92138, USA. This product incorporates proprietary technology under license from V erance Corporation and is protected by U.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certi- fied® device must be register ed in order to play pur- chased DivX V ideo-on-Demand (VOD) movies. T o obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls ar e located on the r ear surface of the steering wheel, at the three and nine o’clock positions. The right-hand rocker switch has a pushbutton in the center , and controls the volume and mode of the sound system.
Radio Operation Pressing the top of the switch will SEEK up for the next listenable station, and pressing the bottom of the switch will SEEK down for the next listenable station. The button located in the center of the left-hand switch will tune to the next preset station that you have pro- grammed in the radio preset pushbutton.
NOTE: If you experience difficulty in playing a particular disc, it may be damaged (i.e., scratched, r eflective coating removed, a hair , moisture or dew on the disc) oversized, or have protection encoding. T ry a known good disc before considering disc player service.
The primary control for the rear blower is on the front climate control unit located on the instr ument panel. When the front control is in any position other than rear , the front control operates all the rear functions. The rear airflow modes will mirror the front unit opera- tion.
2. Rear Blower Control — If Equipped Use this contr ol to regulate the amount of air for ced through the rear system in any mode you select. The rear blower speed increases as you move the control to the right from the “O” (Off) position. There are seven blower speeds.
NOTE: The air conditioning compressor may operate in Mix and Defrost, even if the A/C button is not pressed. This dehumidifies the air to help dry the windshield.
CAUTION! (Continued) • Do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window . • Keep all objects a safe distance from the window . 9. Recirculation Control Button Press this button to choose between outside air intake or recir culation of the air inside the vehicle.
10. Air Conditioning (A/C) Button Press and release to change the current setting. The indicator illuminates when ON. NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C con- denser (located in front of the radiator), for an accumu- lation of dirt or insects.
Economy Mode If ECONOMY mode is desired, press the A/C button to turn of f the indicator light and the A/C compressor . Rotate the temperature control knob to the desired tem- perature. Also, make sure to select only Panel, Bi-Level or Floor modes. Max A/C For maximum cooling use the A/C and Recirculation mode buttons at the same time.
Rear Blower Control The rear blower control knob can be manually set to off, or any fixed blower speed, by r otating the knob from low to high. This allows the r ear seat occupants to control the volume of air circulated in the rear of the vehicle.
Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the Bi-Level mode is designed to provide cooler air out of the head- liner outlets and warmer air from the floor outlets. Floor Mode Air comes from the floor outlets.
1. Air Conditioning (A/C) Button Press and release to change the current Air Conditioning (A/C) setting, the indicator illuminates when A/C is ON. Performing this function will cause the A TC to switch into manual mode. 2. Left Front Seat Occupant T emperature Display This display shows the temperature setting for the left front seat occupant.
7. Right Front Seat Occupant T emperature Display This display shows the temperature setting for the right front seat occupant. 8. Front Defrost Button Press and release to change the current setting, the indicator illuminates when ON. Performing this function will cause the A TC to switch into manual mode.
14. Blower Control There are seven blower speeds, the blower speed in- creases as you move the control to the right from the lowest blower setting. Performing this function will cause the A TC to switch into manual mode. 15. Mode Control Button Press and release to select between Modes (Panel, Bi- Level, Floor , Mix).
3. When the system is set up for your comfort level, it is not necessary to change the settings. Y ou will experi- ence the greatest efficiency by simply allowing the system to function automatically . NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles.
outlets. If Economy mode is desired, press the A/C button to turn off the A/C mode in the A TC display and deactivate the A/C system. NOTE: • If the system is in Mix, Floor or Defr ost Mode, the A/C can be turned off, but the A/C system shall remain active to prevent fogging of the windows.
1. Mode Display This display shows the current Mode selection. 2. Rear T emperature Display This display shows the temperature setting for the rear seat occupants. 3. Blower Control Display This display shows the current Blower speed selection. 4. Rear Auto Indicator This indicates when the system is in Rear Auto mode.
The rear system temperature control is on the front A TC panel located on the instrument panel. Pressing the Rear T emperature Lock button on the front A TC panel, illuminates a lock symbol in the rear display . The rear temperature and air source are controlled from the front A TC panel.
2. Rotate the Rear Blower , Rear T emperature and the Rear Mode Control knobs to suit your comfort needs. 3. A TC is selected by adjusting the rear blower knob counterclockwise to AUTO. Once the desired temperature is displayed, the A TC System will automatically achieve and maintain that comfort level.
Rear T emperature Control T o change the temperature in the rear of the vehicle, rotate the temperature knob counterclockwise to lower the temperature, and clockwise to increase the tempera- ture. The rear temperature settings are displayed in the front A TC panel.
Recirculation Control When outside air contains smoke, odors, or high humid- ity , or if rapid cooling is desired, you may wish to recir culate interior air by pressing the Recir- culation control button. Recirculation mode should only be used temporarily .
V acation/Storage Before you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes, in fresh air with the blower setting on high.
ST ARTING AND OPERA TING CONTENTS 䡵 ST ARTING PROCEDURES ............... .461 ▫ Automatic T ransmission ............... .461 ▫ Keyless Enter-N-Go™ — If Equipped ...... .462 ▫ Normal Starting ...................... .463 ▫ Extreme Cold W eather (Below –20°F or −29°C) .
䡵 POWER STEERING .................... .484 ▫ Power Steering Fluid Check ............. .484 䡵 P ARKING BRAKE ..................... .485 䡵 ANTI-LOCK BRAKE SYSTEM (ABS) ........ .488 ▫ Anti-Lock Brake W arning Light ........... .489 䡵 ELECTRONIC BRAKE CONTROL SYSTEM .
▫ Life Of T ire ........................ .519 ▫ Replacement T ires .................... .520 䡵 TIRE CHAINS (TRACTION DEVICES) ...... .522 䡵 TIRE ROT A TION RECOMMENDA TIONS .... .523 䡵 TIRE PRESSURE MONITOR SYSTEM (TPMS) . .524 ▫ Base System .
䡵 ADDING FUEL ....................... .542 ▫ Fuel Filler Cap (Gas Cap) .............. .542 ▫ Loose Fuel Filler Cap Message ........... .543 䡵 VEHICLE LOADING ................... .544 ▫ V ehicle Certification Label .............. .544 䡵 TRAILER TOWING .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. W ARNING! • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle.
CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Do not shift from REVERSE, P ARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Shift into P ARK only after the vehicle has come to a complete stop.
Installing And Removing The ENGINE ST AR T/STOP Button Installing The Button 1. Remove the key fob from the ignition switch. 2. Insert the ENGINE ST ART/ST OP button into the ignition switch with the lettering facing up and read- able. 3. Press firmly on the center of the button to secur e it into position.
T o T urn Off The Engine Using ENGINE ST AR T/STOP Button 1. Place the shift lever/gear selector in P ARK, then press and release the ENGINE ST AR T/STOP button.
3. Press the ENGINE ST ART/ST OP button a second time to change the ignition switch to the RUN position (EVIC displays “IGNITION MODE RUN”), 4. Press the ENGINE ST AR T/STOP button a third time to r eturn the ignition switch to the OFF position (EVIC displays “IGNITION MODE OFF”).
W ARNING! (Continued) • If the vehicle has a discharged battery , booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly . Refer to “Jump Starting” in “What T o Do In Emergen- cies” for further information.
The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” pr ocedure. CAUTION! T o prevent damage to the starter , wait 10 to 15 seconds before trying again.
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
W ARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into P ARK, turn the engine OFF , and remove the Key Fob.
Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Inter- lock which requires the transmission to be in P ARK before the ignition switch can be turned to the LOCK position.
When the Fuel Economy (ECON) Mode is engaged, the vehicle control systems will change the following: • The transmission will upshift sooner and downshift later . • The transmission will skip select gears during shifts to allow the engine to operate at lower speeds.
The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefor e, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers).
P ARK (P) This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use P ARK while the vehicle is in motion.
W ARNING! (Continued) • It is dangerous to shift out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something.
W ARNING! (Continued) • Allowing children to be alone in a vehicle unat- tended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the park- ing brake, brake pedal or the shift lever .
REVERSE (R) This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL (N) Use this range when the vehicle is standing for pr olonged periods with the engine running. The engine may be started in this range.
while towing heavy trailers), use the Electronic Range Select (ERS) shift control (described below) to select a lower gear range. Under these conditions, using a lower gear range will improve performance and extend trans- mission life by reducing excessive shifting and heat buildup.
4. W ait approximately 10 seconds. 5. Restart the engine. 6. Shift into the desired gear range. If the problem is no longer detected, the transmission will r eturn to normal operation. NOTE: Even if the transmission can be reset, we recom- mend that you visit your authorized dealer at your earliest possible convenience.
T o exit ERS mode, simply press and hold the shift lever to the right (+) until “D” is once again displayed in the instrument cluster . W ARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury .
Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (sixth gear). The transmission will automatically shift into Overdrive if the following con- ditions are present: • The shift lever is in the DRIVE position.
DRIVING ON SLIPPER Y SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a differ ence in the surface traction under the front (driving) wheels.
DRIVING THROUGH W A TER Driving through water more than a few inches/ centimeters deep will r equire extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising Water W ARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off).
CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water .
POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle.
CAUTION! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the New V ehicle Limited W arranty .
When the parking brake is applied with the ignition switch in the ON position, the “Brake W arning Light” in the instrument cluster will illuminate. NOTE: • When the parking brake is applied and the automatic transmission is placed in gear , the “Brake W arning Light” will flash.
W ARNING! • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
ANTI-LOCK BRAKE SYSTEM (ABS) The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most braking conditions. The system operates with a separate computer to modulate hydraulic pressur e to prevent wheel lock-up and help avoid skidding on slippery surfaces.
W ARNING! (Continued) • The Anti-Lock Brake System cannot prevent colli- sions, including those resulting from excessive speed in turns, following another vehicle too closely , or hydroplaning.
.
your speed and driving to the prevailing r oad conditions, and do not switch off the ESC or TCS. W ARNING! • The TCS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded. • The TCS cannot prevent collisions, including those resulting from excessive speed in turns, or hydro- planing.
W ARNING! • The BAS cannot prevent the natural laws of phys- ics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • The BAS cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
W ARNING! The Electronic Stability Control System (ESC) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESC cannot prevent all accidents, including those resulting from exces- sive speed in turns, driving on very slippery surfaces, or hydroplaning.
When in the “Partial Off” mode, the TCS portion of ESC, except for the “limited slip” feature described in the TCS section, has been disabled and the “ESC OFF Indicator Light” will be illuminated. When in the “Partial Off” mode, ESC will operate without engine torque manage- ment.
ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON position. It should turn off with the engine running.
T railer Sway Control (TSC) TSC uses sensors in the vehicle to recognize an exces- sively swaying trailer and will take the appropriate actions to attempt to stop the sway . The system may reduce engine power and apply the brake of the appro- priate wheel(s) to counteract the sway of the trailer .
HSA Activation Criteria The following criteria must be met in or der for HSA to activate: • V ehicle must be stopped. • V ehicle must be on a 6% (approximate) grade or greater hill. • Gear selection matches vehicle uphill direction (i.e., vehicle facing uphill is in forward gear; vehicle back- ing uphill is in REVERSE gear).
For vehicles not equipped with the EVIC, perform the following steps: NOTE: Y ou must complete Steps 1 through 8 within 90 seconds. 1. Center the steering wheel (front wheels pointing straight forward). 2. Shift the transmission into NEUTRAL. 3. Apply the parking brake.
W ARNING! • If you use a trailer brake controller with your trailer , your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released, there may not be enough brake pressure to hold the vehicle and trailer on a hill and this could cause a collision with another vehicle or object behind you.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards.
• T emporary spare tires are designed for temporary emergency use only . T emporary high pressur e com- pact spare tires have the letter “T” or “S” molded into the sidewall preceding the size designation. Example: T145/80D18 103M. • High flotation tire sizing is based on U.
EXAMPLE: 65 = Aspect ratio in percent (%) – Ratio of section height to section width of tire 10.5 = Section width in inches (in) R = Construction code – ⬙ R ⬙ means radial construction – ⬙.
EXAMPLE: Load Identification: ⴖ ....blank.... ⴖ = Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tire Extra Load (XL) = Extra load (or reinfor ced) tire Light Load .
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Tire T erminology And Definitions T erm Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door . Cold T ire Inflation Pressure Cold tire inflation pressur e is defined as the tire pressur e after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.
Tire Loading And Tire Pressure T ire And Loading Information Placard Location NOTE: The proper cold tire inflation pr essure is listed on the driver ’s side B-Pillar or the rear edge of the driver’s side door . T ire And Loading Information Placard This placard tells you important information about the: 1.
3. T ire size designed for your vehicle. 4. Cold tire inflation pressur es for the front, rear , and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in .
5 ST ARTING AND OPERA TING 509 I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
W ARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressur es can cause uneven wear patterns to develop across the tir e tread.
At least once a month: • Check and adjust tire pressure with a good quality pocket-type pressur e gauge. Do not make a visual judgement when determining proper inflation. T ires may look properly inflated even when they ar e under- inflated. • Inspect tires for signs of tire wear or visible damage.
Tire Pressures For High Speed Operation The manufacturer advocates driving at safe speeds and within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressur e is very important.
Consult an authorized tire dealer for tir e repairs and additional information. Damaged Run Flat tires, or Run Flat tires that have experienced a loss of pressure should be replaced imme- diately with another Run Flat tire of identical size and service description (Load Index and Speed Code).
If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle.
Spare Tires — If Equipped NOTE: For vehicles equipped with TIREFIT instead of a spare tire, please refer to “TIREFIT KIT” in “What T o Do In Emergencies” for further information.
Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tire. Do not install more than one compact spare tire and wheel on the vehicle at any given time.
W ARNING! Limited-use spares are for emergency use only . In- stallation of this limited-use spare tire affects vehicle handling. W ith this tire, do not drive more than the speed listed on the limit-use spare wheel.
T read Wear Indicators T read wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm).
W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have a collision resulting in serious injury or death.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
TIRE CHAINS (TRACTION DEVICES) Use of traction devices requir e sufficient tire-to-body clearance. Follow these recommendations to guard against damage: • T raction device must be of proper size for the tire, as recommended by the traction device manufacturer .
CAUTION! (Continued) • Install device as tightly as possible and then re- tighten after driving about ½ mile (0.8 km). • Do not exceed 30 mph (48 km/h). • Drive cautiously and avoid severe turns and large bumps, especially with a loaded vehicle.
The suggested r otation method is the “r earward cr oss” shown in the following diagram. This rotation pattern does not apply to some directional tires that must not be reversed.
The TPMS will warn the driver of a low tire pressur e if the tire pressure falls below the low pressur e warning threshold for any reason, including low temperature effects, or natural air pressure loss through the tire.
CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style.
• Seasonal temperature changes will af fect tire pressure, and the TPMS will monitor the actual tire pressur e in the tire. Base System The TPMS uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressur e lev- els.
NOTE: The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to r eceive this infor - mation. The “T ire Pressure Monitoring T elltale Light” will flash on and off for 75 seconds, and r emain on solid when a system fault is detected.
• After driving for up to 20 minutes above 15 mph (24 km/h), the “T ire Pressure Monitoring T elltale Light” will flash on and off for 75 seconds and then remain on solid.
TPMS Low Pressure W arnings The “T ire Pressur e Monitoring T elltale Light” will illumi- nate in the instrument cluster , and an audible chime will be activated when one or mor e of the four active road tire pressur es are low .
message will not be present, and a pressur e value will be displayed instead of dashes. A system fault can occur by any of the following scenarios: • Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPMS sensors.
• After driving the vehicle for up to 20 minutes above 15 mph (24 km/h), the “T ire Pressur e Monitoring T elltale Light” will flash on and off for 75 seconds and then remain on solid.
The TPM sensors are regulated under one of the follow- ing licenses: United States MRXC4W4MA4 Canada 2546A-C4W4MA4 FUEL REQUIREMENTS 3.6L Engine This engine is designed to meet all emis- sions regulations and provide excellent fuel economy and performance when us- ing high-quality unleaded “regular” gaso- line having an octane rating of 87.
Reformulated Gasoline Many areas of the country r equire the use of cleaner burning gasoline r eferred to as “Reformulated Gasoline.” Reformulated gasoline contain oxygenates and are spe- cifically blended to r educe vehicle emissions and im- prove air quality .
E-85 Usage In Non-Flex Fuel V ehicles Non-Flex Fuel V ehicles (FFV) are compatible with gasoline containing 10% ethanol (E10). Gasoline with higher ethanol content may void the New V ehicle Limited W arranty . If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: • Operate in a lean mode.
Materials Added T o Fuel All gasoline sold in the United States is required to contain ef fective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel.
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
FLEXIBLE FUEL — IF EQUIPPED E-85 General Information The information in this section is for Flexible Fuel ve- hicles only . These vehicles can be identified by a unique fuel filler door label that states Ethanol (E-85) or Un- leaded Gasoline Only . This section only covers those subjects that are unique to these vehicles.
Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
For best results, a refueling pattern that avoids alternat- ing between E-85 and unleaded gasoline is recom- mended. When you do switch fuel types it is recommended that: • Y ou do not add less than 5 gallons (19 Liters) when refueling. • Y ou drive the vehicle immediately after r efueling for at least 5 miles (8 km).
Starting The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). In the range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up.
ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. NOTE: The driver’s side sliding door cannot be opened while the fuel door is open.
W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the MIL to turn on.
VEHICLE LOADING As requir ed by National Highway T raffic Safety Admin- istration regulations, your vehicle has a certification label affixed to the driver’s side door or B-Pillar . If seats are r emoved for carrying cargo, do not exceed the specified GVWR and GA WR.
W ARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have a collision.
The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. W eigh it on a commercial scale to ensure that it is not over the GVWR. Figure out the weight on the front and rear of the vehicle separately .
Common T owing Definitions The following trailer towing r elated definitions will assist you in understanding the following information: Gross V ehicle W eight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, car go and tongue weight.
Frontal Area The fr ontal ar ea is the maximum height multiplied by the maximum width of the front of a trailer . T railer Sway Control The trailer sway control can be a mechanical telescoping link th.
T railer sway control and a weight distributing (load equalizing) hitch are recommended for heavier T ongue W eights (TW) and may be r equired depending on vehicle and trailer configuration/loading to comply with Gross Axle W eight Rating (GA WR) requirements.
T railer T owing W eights (Maximum T railer W eight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ T ransmission GCWR (Gross Combined W eight Rating) Frontal Area Max. GTW (Gross T railer W eight) Max.
NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight refer enced on the T ire and Loading Information placar d. Refer to “T ire Safety Information” in “Starting and Operating” for further information.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle.
W ARNING! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
W ARNING! (Continued) • T otal weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. GVWR 2. GTW 3. GA WR 4. T ongue weight rating for the trailer hitch uti- lized. T owing Requirements — T ires • Do not attempt to tow a trailer while using a compact spare tire.
T owing Requirements — T railer Brakes • Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer . This could cause inadequate braking and possible personal injury . • An electronically actuated trailer brake controller is requir ed when towing a trailer with electronically actuated brakes.
T owing Requirements — T railer Lights And W iring Whenever you pull a trailer , r egardless of the trailer size, stoplights and turn signals on the trailer are requir ed for motoring safety . The T railer T ow Package may include a four- and seven- pin wiring harness.
T owing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Automatic T ransmission The DRIVE gear can be selected when towing. However , if frequent shifting occurs while in DRIVE, use the Electronic Range Select (ERS) shift control to select a lower gear range.
If you REGULARL Y tow a trailer for more than 45 minutes of continuous operation, then change the trans- mission fluid and filter as specified for “police, taxi, fleet, or frequent trailer towing.” Refer to the “Maintenance Schedule” for the proper maintenance intervals.
RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle T owing Condition Wheels OFF the Ground All Models Flat T ow NONE NOT ALLOWED Dolly T ow Front OK Rear NOT A.
Recreational T owing — All Models Recreational towing is allowed ONL Y if the front wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer . If using a tow dolly , follow this procedure: 1. Properly secur e the dolly to the tow vehicle, following the dolly manufacturer’s instructions.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 HAZARD W ARNING FLASHERS .......... .563 䡵 IF YOUR ENGINE OVERHEA TS ........... .563 䡵 TIREFIT KIT — IF EQUIPPED ............ .564 ▫ TIREFIT Storage ..................... .565 ▫ TIREFIT Kit Components And Operation .
▫ Road T ire Installation .................. .595 䡵 JUMP-ST ARTING ..................... .597 ▫ Preparations For Jump-Start ............. .598 ▫ Jump-Starting Procedure ............... .599 䡵 FREEING A STUCK VEHICLE ............ .601 䡵 SHIFT LEVER OVERRIDE .
HAZARD W ARNING FLASHERS The Hazard W arning flasher switch is located in the lower center area of the instrument panel. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all direc- tional turn signals will flash on and of f to warn oncoming traffic of an emergency .
CAUTION! Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off immediately , and call for service.
TIREFIT Storage The TIREFIT kit is stowed behind the rear left side trim panel in the rear cargo area. 1. Open the liftgate. 2. T urn the two rear left side trim panel latches to release the trim panel.
TIREFIT Kit Components And Operation Using The Mode Select Knob And Hoses Y our TIREFIT kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only .
Using The Power Button Push and release the Power Button (4) once to turn On the TIREFIT kit. Push and release the Power Button (4) again to turn Off the TIREFIT kit. Using The Deflation Button Press the Deflation Button (2) to reduce the air pressur e in the tire if it becomes over-inflated.
• When the TIREFIT sealant is in a liquid form, clean water , and a damp cloth will remove the material from the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the TIREFIT kit.
W ARNING! (Continued) – If you are unsure of the condition of the tire or the wheel. • Keep TIREFIT away from open flames or heat source. • A loose TIREFIT kit thrown forward in a collision or hard stop could endanger the occupants of the vehicle.
Sealing A Tire With TIREFIT (A) Whenever Y ou Stop T o Use TIREFIT : 1. Pull over to a safe location and turn on the vehicle’s Hazard W arning flashers. 2. V erify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground.
(C) Injecting TIREFIT Sealant Into The Deflated T ire: • Always start the engine before turning ON the TIRE- FIT kit. NOTE: Manual transmission vehicles must have the parking brake engaged and the shift lever in NEUTRAL.
If the sealant (white fluid) does flow through the Sealant Hose (6): 1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes 30 - 70 seconds). As the sealant flows through the Sealant Hose (6), the Pressur e Gauge (3) can read as high as 70 psi (4.
3. Immediately disconnect the Sealant Hose (6) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place the TIREFIT kit in the vehicle storage location. Quickly proceed to (D) “Drive V e- hicle.” CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully .
(E) After Driving: Pull over to a safe location. Refer to “Whenever Y ou Stop to Use TIREFIT” before continuing. 1. Push in the Mode Select Knob (5) and turn to the Air Mode position. 2. Uncoil the power plug and insert the plug into the vehicle’s 12 V olt power outlet.
5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized dealer as soon as pos- sible. Refer to (F) “Sealant Bottle and Hose Replace- ment”. NOTE: When having the tire serviced, advise the autho- rized dealer or service center that the tir e has been sealed using the TIREFIT service kit.
T orque Specifications Lug Nut/Bolt T orque **Lug Nut/ Bolt Size Lug Nut/ Bolt Socket Size 100 Ft-Lbs (135 N·m) M12 x 1.25 19 mm **Use only Chrysler recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.
After 25 miles (40 km) check the lug nut/bolt tor que to be sure that all the lug nuts/bolts are properly seated against the wheel. W ARNING! T o avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered.
W ARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Spare Tire Removal The spare tire is stowed inside a protective cover located under the center of the vehicle between the fr ont doors by means of a cable winch mechanism. The “spar e tire drive” nut is located on the floor , under a plastic cap at the front of the floor console or under front super console forward bin liner .
T o Access Spare Tire Winch Drive Nut T o access the spare tire winch drive nut and lower the spare tire, you will need to refer to one of the following center console configurations. Super Console For vehicles equipped with the Super Console, the spare tire winch assembly drive nut is located beneath the console.
2. Open the front drawer to expose the storage compart- ment. 3. Remove the liner from the console’s storage compart- ment to access the spare tire winch drive nut. Premium/Base/Cargo Center Console Pull the W inch Cover assembly plug (if equipped) to access the winch drive nut.
Spare Tire T ools The tool pouch contains three pieces and can be as- sembled into a spar e tire hook; to remove the compact spare tire/cover assembly from under the vehicle, or a W inch T -handle; to raise/lower the compact spare tire/ cover assembly .
Spare Tire Removal Instructions The spare tire is located under the vehicle beneath the center console area. 1. Assemble the spar e tire tools into a T -handle and place the square end over the spare tire winch drive nut.
2. Rotate the nut to the left until the winch mechanism stops turning freely . This will allow enough slack in the cable to allow you to pull the spare tire out from underneath the vehicle. CAUTION! The winch mechanism is designed for use with the winch T -handle only .
4. Stand the tir e/cover assembly upright and r emove the wheel spacer by squeezing the winch retaining tabs together . Push the retainer through the spare tire to release it from the wheel. Preparations For Jacking 1. Park the vehicle on a firm, level surface.
6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right fr ont tire, block the left rear wheel.
W ARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change.
2. There are two jack engagement locations on each side of the vehicle body . These locations are on the sill flange of the vehicle body . CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated. Rear jack locations are between a pair of down-facing tabs on the sill flange of the vehicle side body .
Front jack location is on the sill flange of the vehicle body and is located 6 in (150 mm) from door edge. Rear Jack Engaged Front Jack Locations 6 WHA T TO DO IN EMERGENCIES 589 I n f o r m a t i o n.
NOTE: In some situations the jack may need to be placed on its side in order to be pushed under the vehicle. Return the jack to its correct orientation once it is under the vehicle. W ARNING! Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you.
W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel lug nuts, for vehicles with wheel covers, remove the cover fr om the wheel by hand.
NOTE: Do not install the wheel cover on the compact spare. 7. Lower the vehicle by turning the jack screw to the left. 8. Refer to “T orque Specifications” in this section for proper wheel lug nut torque. 9. Lower the jack to its fully-closed position.
Securing The Compact Spare Tire 1. Assemble the winch handle extensions to form a T -handle and fit the winch T -handle over the drive nut. Rotate the nut to the left until the winch mecha- nism stops turning freely . This will allow enough slack in the cable to allow you to pull the wheel spacer out from under the vehicle.
CAUTION! The compact spare tire/cover assembly must be used when the compact spare tire is stored. Failure to use this cover could drastically reduce the life of the compact spare tire. W ARNING! V erify that both retainer tabs of the wheel spacer have been properly extended through the center of the wheel and compact spare tire/cover assembly .
Road Tire Installation V ehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. T o ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which ar e on each side of the valve stem.
3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover . 4. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel.
3. Lower the vehicle to the ground by turning the jack handle counterclockwise. 4. Refer to “T orque Specifications” in this section for proper wheel lug nut torque. 5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are pr operly seated against the wheel.
Preparations For Jump-Start The battery in your vehicle is located on the left side of the engine compartment. W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. Y ou can be injured by moving fan blades.
3. If using another vehicle to jump-start the battery , park the vehicle within the jumper cables r each, set the parking brake and make sure the ignition is OFF . W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result.
4. Connect the opposite end of the negative (-) jumper cable to a good engine ground (exposed metal part of the dischar ged vehicle’s engine) away from the battery and the fuel injection system. W ARNING! Do not connect the jumper cable to the negative (-) post of the discharged battery .
CAUTION! Accessories plugged into the vehicle power outlets draw power from the vehicle’ s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough without engine operation, the vehicle’ s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting.
CAUTION! • When “rocking” a stuck vehicle by shifting be- tween DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Revving the engine or spinning the wheels too fast may lead to transmission overheating and failure.
3. Using a small screwdriver or similar tool, remove the shift lever override access cover (located near the top right of the shift lever in the instrument panel). 4. Press and maintain firm pressure on the brake pedal. 5. Insert the scr ewdriver or similar tool into the access hole, and push and hold the override release lever forward.
TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial wrecker service. T owing Condition Wheels OFF the Ground ALL MODELS Flat T ow NONE If trans.
Proper towing or lifting equipment is r equired to pr event damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equip- ment manufacturer ’s instructions.
The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. If flatbed equipment is not available, and the transmission is operable, the vehicle may be flat towed (with all four wheels on the ground) under the following conditions: • The transmission must be in NEUTRAL.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMP ARTMENT — 3.6L ......... .609 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .610 ▫ Loose Fuel Filler Cap Message ........... .610 䡵 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS ...................
▫ Appearance Care And Protection From Corrosion .......................... .637 ▫ Cleaning The Instrument Panel Cupholders . .643 䡵 FUSES ............................. .644 ▫ T otally Integrated Power Module ......... .644 䡵 VEHICLE STORAGE .
ENGINE COMP ARTMENT — 3.6L 1 — Air Filter 6 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Batt.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
“Electronic V ehicle Information Center (EVIC)” in ”Un- derstanding Y our Instrument Panel” for further informa- tion. T ighten the gas cap until a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is pr operly tight- ened.
Y our vehicle has a simple ignition actuated test, which you can use prior to going to the test station. T o check if your vehicle’s OBD II system is ready , you must do the following: 1. Cycle the ignition switch to the ON position, but do not crank or start the engine.
REPLACEMENT P ARTS Use of genuine MOP AR® parts for normal/scheduled maintenance and repairs is highly r ecommended to en- sure the designed performance. Damage or failures caused by the use of non-MOP AR® parts for mainte- nance and r epairs will not be cover ed by the New V ehicle Limited W arranty .
Besides those maintenance items specified in the fixed “Maintenance Schedule”, there are other components which may r equire servicing or replacement in the future.
Engine Oil Checking Oil Level T o assure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed engine is shut OFF .
American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only recommends API Certified engine oils. CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
Synthetic Engine Oils Y ou may use synthetic engine oils pr ovided the r ecom- mended oil quality r equirements are met, and the recom- mended maintenance intervals for oil and filter changes are followed.
W ARNING! The air induction system (air cleaner , hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.) unless such removal is necessary for repair or maintenance.
W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, refer to “Safety T ips/Exhaust Gas” in “Things T o Know Before Starting Y our V ehicle” for further information.
Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydr ofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product.
5. Remove the A/C air filter by pulling it straight out of the housing. 6. Install the A/C air filter with the arrow on the filter pointing toward the floor .
components to ensure pr oper function. When performing other under hood services, the hood latch, release mecha- nism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year , preferably in the Fall and Spring.
The washer fluid reservoir will hold a full gallon of fluid when the Low W asher Fluid Light illuminates. W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution.
Coolant Checks Check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather , where applicable). If the engine coolant (antifreeze) is dirty , the system should be drained, flushed, and refilled with fresh OA T coolant (conforming to MS-12106) only by an authorized dealer .
CAUTION! • Mixing of engine coolant (antifreeze) other than specified Organic Additive T echnology (OA T) en- gine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.
you use the same engine coolant (OA T coolant conform- ing to MS-12106) throughout the life of your vehicle. Please review these recommendations for using Organic Additive T echnology (OA T) engine coolant (antifreeze) that meets the requirements of Chrysler Material Stan- dard MS-12106.
• Mixing engine coolant (antifreeze) types is not recom- mended and can result in cooling system damage. If HOA T and OA T coolant are mixed in an emergency , have a authorized dealer drain, flush, and refill with OA T coolant (conforming to MS-12106) as soon as possible.
Disposal Of Used Engine Coolant Used ethylene glycol-based engine coolant (antifreeze) is a r egulated substance requiring pr oper disposal. Check with your local authorities to determine the disposal rules for your community .
If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant expansion bottle. • Check the coolant freeze point in the radiator and in the coolant expansion bottle.
W ARNING! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou would not have your full braking capacity in an emergency .
W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance.
W ARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure.
CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New V ehicle Limited W arranty . Fluid Level Check The fluid level is pr eset at the factory and does not requir e adjustment under normal operating conditions.
Appearance Care And Protection From Corrosion Protection Of Body And Paint From Corrosion V ehicle body care requirements vary accor ding to geo- graphic locations and usage.
• If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR® Super Kleen Bug and T ar Remover to remove. • Use a high quality cleaner wax, such as MOP AR® Cleaner W ax to remove road film, stains and to protect your paint finish.
• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use MOP AR® T ouch Up Paint on scratches as soon as possible.
Stain Repel Fabric Cleaning Procedure — If Equipped Stain Repel seats may be cleaned in the following man- ner: • Remove as much of the stain as possible by blotting with a clean, dry towel.
Y our leather upholstery can be best pr eserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be r emoved easily with a soft cloth and MOP AR® T otal Clean or equivalent.
Glass Surfaces All glass surfaces should be cleaned on a r egular basis with MOP AR® Glass Cleaner , or any commercial household- type glass cleaner . Never use an abrasive type cleaner . Use caution when cleaning the inside rear window equipped with electric defrosters or the right rear quarter window equipped with the radio antenna.
W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system.
FUSES W ARNING! • When replacing a blown fuse, always use an ap- propriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material.
CAUTION! • When installing the T otally Integrated Power Mod- ule cover , it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
The numbers inside the TIPM cover correspond to the following table. Cavity Cartridge Fuse Mini-Fuse Description J1 40 Amp Green — Power Folding Seat J2 30 Amp Pink — Power Liftgate Module J3 30 A.
Cavity Cartridge Fuse Mini-Fuse Description J12 30 Amp Pink HV AC Rear Blower , Radiator Fan Motor J13 60 Amp Y ellow — Ignition Off Draw (IOD) – Main J14 40 Amp Green — Rear W indow Defogger J1.
Cavity Cartridge Fuse Mini-Fuse Description M6 — 20 Amp Y ellow Power Outlet #1 (ACC), Rain Sensor , Cigar Lighter (Instrument Panel or with Console Rear) M7 — 20 Amp Y ellow Power Outlet #2 (BA T.
Cavity Cartridge Fuse Mini-Fuse Description M15 — 20 Amp Y ellow Rear V iew Mirror , Instrument Cluster , Multi- Function Control Switch, T ire Pressur e Monitor , Glow Plug Module – If Equipped M.
Cavity Cartridge Fuse Mini-Fuse Description M27 — 10 Amp Red W ireless Control Module, Keyless Entry Module M28 — 10 Amp Red Powertrain, T ransmission Control Module M29 — 10 Amp Red Occupant Cl.
Cavity Cartridge Fuse Mini-Fuse Description M37 — 10 Amp Red Antilock Brakes, Stability Control, Stop Lamp, Fuel Pump M38 — 25 Amp Natural Door Lock/Unlock Motors, Liftgate Lock/Unlock Motors The power windows are fused by a 25 Amp circuit breaker located in the T otally Integrated Power Module.
REPLACEMENT BULBS Interior Bulbs Bulb Number Center & Rear Dome Lamp 578 Center & Rear Reading Lamps 578 Front Door Courtesy Lamp 578 Front Header Reading Lamps – If Equipped 578 Instrument .
Bulb Number Rear T urn Signal Lamp 3757A Rear T ail, Stop, and Side Marker Lamp LED (Serviced at Autho- rized Dealer) Center High-Mounted Stop Lamp LED (Serviced at Autho- rized Dealer) Backup Lamp 3157 License 168 BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmo- spheric conditions.
NOTE: On vehicles equipped with High Intensity Dis- charge (HID) headlamps, when the headlamps are turned on, there is a blue hue to the lamps. This dimin- ishes and becomes more white after approximately 10 seconds, as the system charges. Quad Headlamps 1.
Front Side Marker Lamp 1. Raise the hood to access the r ear of the headlamp housing. NOTE: Access is somewhat limited. Y ou may have to remove the inner fender well or remove the headlamp housing for bulb replacement. 2. T wist the socket and remove from the headlamp housing, then pull the bulb out.
Rear T urn Signal And Backup Lamp 1. Raise the liftgate. 2. Remove the tail lamp assembly by removing the two screws from the inboard side. Use a fiber stick or similar tool to gently pry the light on the outboard side to disengage the two ball studs.
Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately . The CHMSL must be r eplaced as an assembly , see your authorized dealer . License Lamp The license plate lamp is located under the tailgate light bar and above the license plate.
FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 20 Gallons 76 Liters Engine Oil with Filter 3.6L Engine (SAE 5W -20, API Certi- fied). 6 Quarts 5.6 Liters Cooling System * 3.6L Engine (MOP AR® Antifreeze/ Engine Coolant 10 Y ear/150,000 Mile Formula or equivalent) meet- ing the requir ements of Chrysler Material Standard MS-12106.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant W e recommend you use MOP AR® Antifreeze/Coolant 10 Y ear/150,000 Mile Formula OA T (Organic Additive T echnology) meeting the requirements of Chrysler Material Standard MS-12106.
Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission Use Only A TF+4® Automatic T ransmission Fluid. Fail- ure to use A TF+4® fluid may af fect the function or performance of your transmission. W e recommend MOP AR® A TF+4® Fluid.
MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE ............ .662 ▫ Maintenance Chart ................... .664 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e d.
MAINTENANCE SCHEDULE Y our vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate.
Once A Month Or Before A Long T rip: • Check engine oil level. • Check windshield washer fluid level. • Check tire pressure and look for unusual wear or damage. Rotate tires at the first sign of irregular wear , even if it occurs before the oil indicator system turns on.
Maintenance Chart Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70.
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or.
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or.
W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
I n f o r m a t i o n P r o v i d e d b y :.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 SUGGESTIONS FOR OBT AINING SER VICE FOR YOUR VEHICLE ...................... .671 ▫ Prepar e For The Appointment ............ .671 ▫ Prepar e A List ....................... .671 ▫ Be Reasonable W ith Requests .
䡵 DEP AR TMENT OF TRANSPOR T A TION UNIFORM TIRE QUALITY GRADES ................ .677 ▫ T readwear .......................... .677 ▫ T raction Grades .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you are having warranty work done, be sure to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner . This is why you should always talk to an authorized dealer service manager first. Most matters can be re- solved with this process.
In Mexico Contact: A v . Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P . 05109 Mexico, D. F . In Mexico City: 5081-7568 Outside Mexico City: 1-800-505-1300 Customer Assistance For The Hearing Or.
The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract.
MOP AR® P ARTS MOP AR® fluids, lubricants, parts, and accessories are available from an authorized dealer . They are r ecom- mended for your vehicle in or der to help keep the vehicle operating at its best. REPORTING SAFETY DEFECTS In The 50 United States And Washington, D.
PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover or ders are ac- cepted. If you prefer mailing your payment, please call for an order form.
Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orldwide W eb at: • www .techauthority .com DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tir e grading categories were established by the National Highway T raffic Safety Administration.
concrete. A tire marked C may have poor traction perfor- mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
Adding Engine Coolant (Antifreeze) ........... .628 Adding Fuel ............................ .542 Adding W asher Fluid ..................... .625 Additives, Fuel .......................... .536 Adjustable Pedals ........................ .241 Airbag ..
Automatic Headlights ..................... .227 Automatic T emperature Control (A TC) ......... .445 Automatic T ransmission ................... .468 Adding Fluid ......................... .636 Fluid and Filter Changes ................. .636 Fluid Change .
Radiator (Coolant Pressur e) ............... .630 Carbon Monoxide W arning ................. .123 Cargo Ar ea Features ...................... .300 Cargo Compartment ...................... .300 Luggage Carrier ....................... .302 Cargo (V ehicle Loading) .
Universal Consumer Interface (UCI) ......... .382 Conserving Fuel ......................... .344 Console ............................... .293 Console, Floor .......................... .293 Console, Overhead ....................... .259 Console, Removable .
Door Locks Door Locks ............................ 3 7 K e y F o b ............................... 3 7 Remote ............................... 3 7 Remote Keyless Entry (RKE) ................ 3 7 Door Opener , Garage ...................... .263 Driving Through Flowing, Rising, or Shallow Standing W ater .
Flooded, Starting ...................... .465 Fuel Requirements ..................... .533 O i l ................................. .615 Oil Selection .......................... .615 Oil Synthetic ......................... .617 Overheating ............
Fluid Capacities ......................... .658 Fluid Leaks ............................ .127 Fluid Level Checks Automatic T ransmission ................. .636 Brake ............................... .633 Cooling System ........................ .627 Power Steering .
Gasoline, Clean Air ....................... .534 Gasoline (Fuel) .......................... .533 Conserving ........................... .344 Gasoline, Reformulated .................... .534 Gauges Coolant T emperature .................... .329 Fuel ..
Hood Release ........................... .224 Hook, Coat ............................. .292 Ignition ................................. 1 5 K e y.................................. 1 5 Ignition Key Removal ....................... 1 5 Illuminated Entry .
Lane Change Assist ....................... .232 Lap/Shoulder Belts ......................... 6 6 Latches ............................... .127 Hood ............................... .224 Lead Free Gasoline ....................... .533 Leaks, Fluid ......
Passing ............................. .233 Reading ............................. .260 Rear Servicing ........................ .656 Rear T ail ............................ .656 Seat Belt Reminder ..................... .329 Security Alarm ..............
Exterior Folding ....................... .138 Heated .............................. .140 Memory ............................. .220 Outside ............................. .138 Rearview ............................ .136 V anity ..........................
Outside Rearview Mirrors .................. .136 Overhead Console ........................ .259 Overhead T ravel Information Center ........... .259 Overheating, Engine ...................... .329 Owner’s Manual (Operator Manual) ............. 4 Paint Care .
Rear Camera ........................... .256 Rear Cross Path ......................... .148 Rear Heater ............................ .443 Rear ParkSense System .................... .248 Rearview Mirrors ........................ .136 Rear W indow Features .
Satellite Radio Antenna .................... .379 Schedule, Maintenance .................... .662 Seat Belt Maintenance ..................... .642 Seat Belt Reminder ......................... 7 9 Seat Belts ................................ 6 2 Adjustable Shoulder Belt .
Shoulder Belts ............................ 6 6 Side Airbag .............................. 9 1 Signals, T urn ........................... .127 Sliding Door ............................. 5 0 SmartBeams ............................ .233 Snow Chains (T ire Chains) .
T emperature Control, Automatic (A TC) ......... .445 T emperature Gauge, Engine Coolant ........... .329 T ilt Steering Column ...................... .239 T ire and Loading Information Placard .......... .506 TIREFIT ............................... .
Recreational .......................... .559 W eight .............................. .550 T owing Assistance ........................ .166 T owing V ehicle Behind a Motorhome .......... .559 T raction ............................... .481 T raction Control .
Operating Instructions CD Mode ........... .360 Operating Instructions Radio Mode ......... .356 Playing MP3 Files ...................... .362 Uconnect® 130 W ith Satellite Radio Multimedia Satellite Radio ................ .377 Operating Instructions Radio Mode .
W ater Driving Through ....................... .482 W ind Buffeting ............................ 5 0 W indow Fogging ........................ .456 W indows ................................ 4 5 Power ................................ 4 6 Rear V ent ....
デバイスChrysler Town & Country (2014)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Chrysler Town & Country (2014)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはChrysler Town & Country (2014)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Chrysler Town & Country (2014)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Chrysler Town & Country (2014)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Chrysler Town & Country (2014)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はChrysler Town & Country (2014)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Chrysler Town & Country (2014)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちChrysler Town & Country (2014)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
