Cisco SystemsメーカーCIVS-IPC-2621Vの使用説明書/サービス説明書
ページ先へ移動 of 108
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco V ideo Sur v ei llanc.
NOTICE. ALL STATEMENTS, INF ORMATION, AND R ECOMMENDATION S IN THIS MANU AL ARE BELIEV ED TO BE ACCURATE BUT ARE PRESEN TED WITHOUT WARRANTY OF ANY KI ND, EXPRES S OR IMPLIED. USERS MUST TAK E FULL RESPONS IBILITY F OR THEIR APPLI CATION OF ANY P RODUCTS.
iii Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 CONTENTS Preface vii Overview 1-vii Organization 1-vii Obtaining Documentation, Obtaining Support, and Security Guid elines 1-v.
Contents iv Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 EAPOL Window 3-11 Administration Windows 3-12 Users Window 3-12 Maintenan ce Window 3-14 Firmware Window 3-15 Audio/Vide.
vii Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Preface Overview This document, Cisco V ideo Surveillance 2621 IP Dome User Guide, pro vides information about installing, conf iguring, using, managing, and tr oubleshooting the Cisco V ideo Surveillance 26 21 IP Dome, model CIVS-IPC-2621.
viii Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Preface Obtaining Documentation, Obtaining Support, and Security Guide lines.
CH A P T E R 1-1 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 1 Overview This chapter pro vides an describes of the Cisco V ideo Surveil lance 2621 IP dome and provi des an ov ervie w of its features.
1-2 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 1 Overvi ew IP Camera Overview • Motion detection— The IP cameras can detec t motion in up to four d esignated fields of view b y analyzing changes in p ixels and genera te an alert if motion is detected.
1-3 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 1 Overview IP Camera Overview Physical Details Figure 1-1 and the table that foll ows descri be the items on the top of the 2 621 IP dome.
1-4 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 1 Overvi ew IP Camera Overview 3 Audio port Allo ws the connection of the audio Y cable that is pro vided with the IP camera. Y ou can connect an optional ex ternal speaker , optional e xternal microphone (with pre-ampl ifier), or both de vices through this cable.
1-5 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 1 Overview IP Camera Overview Figure 1-2 and the table that foll ows descri be the items on the bottom of the 26 21 IP dome. Figur e 1 -2 Bott om of the 2621 IP Dome 1 USB port Reserved for future use 2 Analog vid eo output 3.
1-6 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 1 Overvi ew IP Camera Overview Package Contents The the Cisco V ideo Surveillance IP Camera package includes these items: • Cisco V ideo Surveillance 2621 IP Camera Qu ick Start Gu ide (qty .
CH A P T E R 2-1 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 2 Getting Started This chapter pro vides instructions for installin g and performing the initial setu p of the Cisco V ideo Surveillance IP Camera.
2-2 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome War ni ng The power supply must be placed indoors. Statement 331 Note If you use the IP camera outdoo rs, place the camera and the po wer supply in a suitable NEMA enclosure.
2-3 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome • Mounting with a Condu it Base, page 2-9 • .
2-4 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome – Drill bits (required for surface mounting with a condu it base, mounting to a ceiling tile, or mounting directly on a solid surface).
2-5 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Figur e 2-2 Disassembling the 2621 IP Dome Components Step 2 Remove the Pri vacy shield b y squeezing it inward to release it from the four tabs that hold it into place (see Figure 2-2 ).
2-6 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Figur e 2-3 Attac hing the Base Plate to a Juncti.
2-7 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Step 8 (Optional) Use the GPIO ports to connect ex ternal devices that trig ger alarms (con nect through alarm input ports) or respond t o alarms (connect through alarm output ports).
2-8 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome – Back focus—The back focus is factory set fo r optimal use and should not req uire adjustments.
2-9 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Figur e 2-5 Attac hing the Priv acy Shield and D.
2-10 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome T o mount the IP camera with a conduit base, per.
2-11 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Step 2 Remove the Pri vacy shield b y squeezing it inward to release it from the four tabs that hold it into place (see Figure 2-2 ).
2-12 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Step 8 Attach the base plate to the conduit ba se with the four screws, provided (see Figure 2-8 ).
2-13 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Step 12 (Optional) Use the GPIO ports to connect external de vices that trig ger alarms (connect through alarm input ports) or respond t o alarms (connect through alarm output ports).
2-14 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome • Make the follo wing adjustments, vie wing the video on the analog moni tor as needed: – Back focus—The back focus is factory set fo r optimal use and should not req uire adjustments.
2-15 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Figur e 2-1 0 Attac h ing the Pr ivac y Shield .
2-16 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Mounting to a Ceiling Tile Y ou can mount the IP dome in a ceiling tile. The ceiling tile must be able to support at l east three times the weight of th e IP dome.
2-17 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Figur e 2-1 1 Disassembling the 2621 IP Dome Co.
2-18 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Figur e 2-12 Prepar ing the 2621 IP Dome Ceiling Tile Step 5 Place the ceiling tile mount ing plate o ver the ceil ing tile.
2-19 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Step 9 (Optional) Co nnect an extern al speaker , microphone, or both to the Y cable, then connect the Y cable to the audio port on the IP dome.
2-20 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Figur e 2-13 Secur ing TORX Scr ews Mounting on .
2-21 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Figur e 2-14 Disassembling the 2621 IP Dome Components Step 2 Remove the Pri vacy shield b y squeezing it inward to release it from the four tabs that hold it into place (see Figure 2-2 ).
2-22 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Installing the Cisco Video Surveillance 2621 IP Dome Step 5 Drill 4 holes for scre ws and cu t out the rectangle for c ables. The scre w holes should be the appropriate size for the mounting hardware that you are using.
2-23 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Performing the Initial Se tup of the IP Camera Caution Do not manually adjust the focus or zoom for the IP camera. Attempting to manually do so may d amage the IP camera lens.
2-24 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Performing the Initial Setup of the IP Camera Procedure Step 1 Start Inte rnet Explore r , en ter HTTPS:// ip_address in the address f ield, and press Enter .
2-25 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Accessing the IP Camera W indows Accessing the IP Camera Windows After you perform the in itial conf.
2-26 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Adjusting the Video Image • Enter the follo wing for a non-secure connection if the IP address is 203 .70.212.52 and the HTTP port number is 10 24: http://203.
2-27 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Adjusting the Video Image camera at an object that is at least 15 feet (4.5 meters) away and gently sli ding the lens to ward or aw ay from the camera.
2-28 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Powering the IP Camera On or Off Powering the IP Camera On or Off The IP camera does not include an on/ off switch . Y ou po wer it on or off b y connecting it to or disconnectin g it from a power source.
2-29 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Cleaning the IP Camera Cleaning the IP Camera T o clean an IP camera, follo w these guidelines: • T o clean external componen ts, use a clean, dry , soft cloth to ge ntly wipe the components.
2-30 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 2 Getting Started Cleaning the IP Camera.
CH A P T E R 3-1 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 3 Configuring and Managing the IP Camera The Cisco V ideo Surv eillance IP Camera pro vides conf iguration windo ws that you use to conf igure and manage the IP camera.
3-2 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Configuration Overview Ta b l e 3-1 Guid elines fo r Configur ing the IP Camera Configuration Item Explanation Guidelines for Use Reference IP camera name and description Identifies the IP camera.
3-3 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Configuration Overview Audio options Includes options for audi o streams that are received or sent by the IP camera. Required if you use an external microphone or speaker .
3-4 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Navigating the Configuration Windows Navigating the Configuration Windows Aft.
3-5 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Setup Windows • Status – System – Audio/V ideo – Network – Syslog &.
3-6 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Setup Window s Description Enter a description of the IP camera. F or exampl e, enter the I P camera location, such as “North Entran ce.
3-7 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Setup Windows Advanced Setup Window The Adv anced Setup w indow provides options for conf iguring v arious networ k and protocol settings for the IP camera.
3-8 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Setup Window s Ta b l e 3-3 Adv anced Setup Window Options Option Description.
3-9 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Setup Windows Max R TP V ideo P acket Length Maximum number of bytes per vi deo packet that are sent in each R TP request.
3-10 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Setup Window s IP Filter Window The IP Filter wi ndow p rovides optio ns for.
3-11 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Setup Windows EAPOL Window The EAPOL windo w provides options for conf iguring Extensible Authentication Pr otocol Over LANs (EAPOL).
3-12 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Administration W indows Administration Windows The Administration win dows let you conf igure IP came ra users, reset or rest art th e IP camera, and upgrade f irmware on the IP camera .
3-13 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Administration Windows Ta b l e 3-6 describes the opti ons in the Users windo w . Ta b l e 3-6 Users Windo w Options Option Description Administrator User ID Display only .
3-14 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Administration W indows Maintenance Window The Maintenance windo w provid es.
3-15 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Administration Windows Firmware Window The Firmware win dow lets y ou view i nformation about the fi rmware that is inst alled on the IP camera and upgrade the firmw are.
3-16 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows Audio/Video Windows The Audio/V ideo windows pr ovide options f or confi guring audio and video from t he IP camera.
3-17 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Audio/Video Window s Ta b l e 3-9 V ideo Wind ow Opti ons Option Description Streaming Mode Choose the m ode that the I P ca mera uses for video streaming: • Single H.
3-18 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows Max. Frame R ate Choose the desired maxi mum frame rate per second for the pr imary video stream from the IP camera.
3-19 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Audio/Video Window s V ideo Quality Control Choose an option for the video q.
3-20 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows Fixed V ideo Quality Specif ies that video is output at a f ixed quality , which ranges from V ery High to V ery Low .
3-21 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Audio/Video Window s Frame Repeat Count Designates ho w video output from the IP camera displays.
3-22 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows V a lidatio n T ime If the Switch Mode option is set to Auto, specify the ti me that the camera waits before swit ching Day/Night modes.
3-23 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Audio/Video Window s Audio Window The Audio windo w provides op tions for enabling and co nf iguring audio that is transmitted to and from the IP camera.
3-24 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Audio/Video Windows Privacy Region Window The Pri vac y Region windo w provides options for creating up t o four user-def ined masking zones that can be used to pro vide regions of pri vac y in the camera f ield of vie w .
3-25 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Securit y Windows Security Windows The Security windo ws provide options for.
3-26 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Security Windows Complexity Window The Complexi ty windo w provides o ptions for conf iguring requirem ents for the IP camera administrator and user passwords.
3-27 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows Applications Windows The Applications windo ws provide options for conf iguring and managing a va riety of applications and IP camera acti vities.
3-28 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Applications W indows If you change any options in the Mail/FTP/HTTP windo w , you must click Sa ve to sav e the changes. T o discard the changes, click Cancel before clicking Sav e .
3-29 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows E-mail Bo dy Attach V ide o Streaming URL Address Check this check box t o include in the mes sage body the URL of an FTP server from which y ou can downlo ad a video fi le to your local PC.
3-30 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Applications W indows Motion Detection Window The Motion Detection wi ndo w allo ws you to configu re up to four re gions in a vid eo field.
3-31 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows Event Window The Event wi ndo w provides op tions for conf iguring ho w the IP camera handles e vents. An e vent is either of the follo w ing: • Motion that the IP camera detect s.
3-32 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Applications W indows If you change an y options in the Ev ent window , ex cept deleting an e vent from t he ev ent schedule list, you must click Sa ve to s av e the change s.
3-33 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows Actions Choose the desired options to designate acti ons that the camera takes when e vents occur: • E-Mail —Sends e-mai l ev ent notification messages to an SMTP serv er .
3-34 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Applications W indows SNMP Window The SNMP windo w allows you to configure S imple Network Management Protoc ol (SNMP) settings for the IP came ra.
3-35 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Applications Windows Alarm I/O Ports Window The Alarm I/O Ports windo w allows you to con figure v arious options for the t wo input and tw o output ports on the IP camera.
3-36 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows Status Windows The Status windo ws provide options for v iewi ng and managing a v ariety of system information.
3-37 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Audio/Video Window The Audio/V ide o window displays informati on abou t the audio and video str eams from the IP camera.
3-38 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows Network Win dow The Network windo w displays information about v arious IP camera network settings and operations.
3-39 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Ta b l e 3-23 Sy slog & Log W indow Options Option Description Local Log Minimum Log Se verity Choose the minimum sev erity of messages that the appear in t he log fil e.
3-40 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows Ta b l e 3-24 describes the messages that can appear in the IP camera log f ile. When you vie w the log f ile, each message includes t he date and time that it wa s logged.
3-41 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Audio: Disable micropho ne. Captures information when audio devices are enabled or disab led in the Audio w indow .
3-42 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows output: F ailed to set output port P ort_Number . Provides information wh en you configur e the output ports on the I P camera.
3-43 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Stream: R TSP stream started.
3-44 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows Video Log Window The V ie w V ideo Log windo w lets you manage video file s. If the T rigger Event option is enabled in the Event windo w , the IP camera creates a vide o file for each e vent that it detects.
3-45 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 3 Configuring and Ma naging the IP Camera Status Windows Ta b l e 3-25 Video Log Windo w Options Option Description V ideo Log Displays a list of v ideo logs. Files are named Camera _name-Event_Name-yymmdd -hhmmss.
3-46 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 3 Config uring and Managin g the IP Camera Status Windows.
CH A P T E R 4-1 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 4 Viewing Live Video After you install and set up the Cisco V ideo Surveillance IP Camera as described in Chapter .
4-2 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 4 Viewing Live Video Viewing Video thr ough the Home W indow Overview Figur e 4-1 Home Window 1 Digital z oom controls. For deta iled inform ation, see the “Home Win dow Cont rols” section on page 4-3 .
4-3 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 4 Viewing Live Video Viewing Video throug h the Home Window Overview Home Window Controls The Home windo w provides controls for se veral IP camera features. Ta b l e 4-1 describes the controls in th e H om e wi n d ow .
4-4 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 4 Viewing Live Video Viewing Video thr ough the Home W indow Overview Microphon e Of f toggle b utton Click the Micropho.
4-5 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 4 Viewing Live Video Viewing Video through Th ird-Party Devices or Software Viewing Video through Third-Party Devices o.
4-6 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 4 Viewing Live Video Viewing Video through Third- Party Devices or Software • T o access the se condary H.264 stream with video only , enter this command: rtsp:// ip_addr ess /img/h2 64video2.
4-7 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 Chapter 4 Viewing Live Video Viewing Video through Th ird-Party Devices or Software • T o access the M JPEG stream with video only , enter this command: rtsp:// ip_addr ess /img/jpgvideo.
4-8 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 4 Viewing Live Video Viewing Video through Third- Party Devices or Software.
CH A P T E R 5-1 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 5 Troubleshooting This chapter describes some common probl ems that may be encountered while usin g the IP camera and provid es possible solutions. Symptom Cannot connect to an IP camera through a web browser .
5-2 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Chapter 5 Tro ubleshooting Symptom The motion detection feature d oes not send e-mail alerts.
A-1 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 APPENDIX A Using the IP Camera with Cisco VSM Cisco V ideo Surv eillance Manager (VSM) is a suite of p ower ful and fle xible vi.
A-2 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Appendix A Using the IP Camera with Cisco VSM.
IN-1 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 INDEX A action configuring 3-33 overview 3-31 triggered by eve nt 3-31 ActiveX contro ls 3-30 Administration wi ndows 3-12 Adm.
Index IN-2 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 Complexity window options 3-26 overview 3-26 configuration guidelin es 3-1 configuration, of IP camera backing up 3-1 4 c.
Index IN-3 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 primary 3-7, 3-38 secondar y 3-7, 3-38 DSCP, for QoS 3-10 dual streaming 3-16, 4-5 E EAPOL window options 3-11 overview .
Index IN-4 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 figure 4-2 overview 4-1 HTTP accessing camera through 2-25 allowing access through 2-24, 3-26 alternative port 3-8 defaul.
Index IN-5 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 L LAN port 1-4 LED controlling operation of 3-6 disabling 3-6 enabling 3-6 Network 1-3, 1-6 PoE 1-3, 1-6 lens, adjusting.
Index IN-6 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 network activity 1-3, 1-6 type 3-38 viewing informat ion about 3-38 Network LED 1-3, 1-6 Network wind ow options 3-38 ove.
Index IN-7 Cisco Video Surveillance Syst em 2621 IP Dome User Guide OL-24129-02 S saturation, of video 3-20 scheduling, events 3-32 SDRAM 3-33, 3-38, 3-44 secure connection 2-25 security password hard.
Index IN-8 Cisco Video Surveillance System 2621 IP Dome User Guide OL-24129-02 password 3-13 V validation time, d ay/night vision auto mode 3-22 video bit rate 3-17, 3-19 brightness 3-20 contrast 3-20.
デバイスCisco Systems CIVS-IPC-2621Vの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Cisco Systems CIVS-IPC-2621Vをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco Systems CIVS-IPC-2621Vの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco Systems CIVS-IPC-2621Vの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco Systems CIVS-IPC-2621Vで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco Systems CIVS-IPC-2621Vを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco Systems CIVS-IPC-2621Vの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco Systems CIVS-IPC-2621Vに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco Systems CIVS-IPC-2621Vデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
