Cisco SystemsメーカーOL-11399-01の使用説明書/サービス説明書
ページ先へ移動 of 50
CHAPTER 2-1 Cisco NetFlow Collector User Guide OL-11399-01 2 Using the NetFlow Collector User Interface Cisco NetFlo w Collector (NFC), Release 6.0 has a web-based user interface (UI) for conf iguration, control, and reporting. Each collector instance has a web server that the user can start to enable the web-based UI.
2-2 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Customizing the Cisco NetFlow Collector Interface Note The web-based UI only works with the collector located on the same machine.
2-3 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Using the Cisco NetFlow Collector User Interface Step 8 When the web conf iguration is complete, the following is displayed: NFC web configuration has been updated.
2-4 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Using the Cisco NetFlow Collector User Interface Figur e 2-1 Cisco NetFlow Collect or User Int erf ace Login Window T o log in to Cisco NetFlo w Collector , do the following: Step 1 From the Login window , enter your User ID and Password.
2-5 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-3 NFC UI Navig ation T r ee Configuration From the Conf iguration window you can perform tasks including specify global parameters; def ine f ields, key b uilders, v alue b uilders and aggreg ators; and create f ilters.
2-6 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-4 NFC Configuration Windo w From this window you can access or conf igu.
2-7 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Aggregators Aggregators def ine ho w the Cisco NetFlo w Collector recei ves NetFlo w data, aggregates or combines the data, and generates output f iles.
2-8 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-6 Add A ggr egator Windo w Fill in the f ields and click Submit to complete the operation.
2-9 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-7 Modify Aggr egator Windo w T o modify the selected aggre gator , f ill in the f ields and click Modify to complete the operation.
2-10 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration The top item in the tree is the name of the threshold.
2-11 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-8 Fields Window The NetFlow Export Field windo w , Figure 2-9 , is displayed when adding or modifying a f ield. Fill in the form and click Add or Modify to complete the operation.
2-12 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-1 0 Ke y Builders Window All ke y builders ha v e a unique ID and a type. The ID is displayed in the navigation tree and the k ey builder table.
2-13 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration BGP Attribute A BGP Attribute k ey b uilder looks up a BGP attrib ute from the Cisco NetFlo w Collector BGP peer using an address from a f low .
2-14 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Bit Field The Bit Field ke y builder obtains a subset of bits from a f ield in a f low . It has the following attrib utes. Boolean A Boolean key builder maps f low v alues to true , false ,o r undef ined .
2-15 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Customer Name The Customer Name ke y builder resolv es the customer name from the input interface f ield. It has the follo wing attributes: The Customer Name key b uilder requires conf iguration in the conf ig/vpn.
2-16 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Ingress CE The Ingress CE k ey b uilder resolv es the ingress CE from the input interface f ield. It has the following attributes: This ke y builder requires conf iguration in the conf ig/peList.
2-17 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Integer Range Map An Integer Range Map key b uilder obtains an integer from a f low and maps the v alue to a string. It has the following attrib utes.
2-18 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration IP Address Range Map An IP Address Range Map k ey b uilder obtains an IP address from a f lo w and maps the v alue to a string. It has the following attrib utes.
2-19 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Multi-Field Map The Multi-Field Map editor is applet-based and is different than the forms for other k ey b uilder types because of the hierarchical nature of a multi-f ield map.
2-20 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Option Data An Option Data key b uilder obtains one or more key v alues from a f low and performs a look up using this result from an option data cache.
2-21 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration String A String key b uilder obtains a UTF-8 string value from a f low .
2-22 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-1 1 V alue Builders Click on Add V alue Builder to bring up an empty form for def ining a new v alue builder .
2-23 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Active Time The Active T ime v alue b uilder obtains a start time and an end time from f ields in a f low and calculates the difference.
2-24 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Max Flow Byte Rate The Max Flow Byte Rate v alue b uilder determines the byte rate for each recei ved f lo w and outputs the highest value found for all f lo ws in an aggregation period.
2-25 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Sum with Sampling Estimation The Sum with Sampling Estimation value b uilder obtains an inte ger v alue from a f ield in a f low , multiplies by the sampling rate in effect, and adds the estimate to a count.
2-26 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-14 Modify Aggr egation Scheme Note Removing an aggre gation scheme that is in use by an aggregator can succeed b ut cause an inv alid reference after the collector is restarted.
2-27 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration The Filter editor is applet-based.
2-28 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Click on the NetFlow Export Sour ce Groups folder of the na vigation tree to display a table of currently def ined source groups, as shown in Figure 2-16 .
2-29 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Click on the appropriate link to add or remov e a source de vice or group. Note that groups are obtained from the NetFlo w Export Source Groups page.
2-30 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Configuration Figur e 2-1 9 Local P eer Set tings Windo w Global The settings in Figure 2-20 affect ho w the Cisco NetFlow Collector works in general.
2-31 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports In limited cases where the conf iguration is more complex than the web-based UII supports, you will be directed to the Advanced windo w and the XML for the selected component will appear in the text area.
2-32 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Figur e 2-22 Reports Windo w From this window you can select the follo wing: • Custom.
2-33 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Figur e 2-23 Custom Repor ts Windo w The f ields of the Custom Reports form are described in T able 2-2 .
2-34 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports T able 2-2 Custom Repor ts Fields Field V alue Description Start Date A date string in the format of dd MMM yyyy where dd is the day of the month, MMM is the abbre viated name of the month, and yyyy is the four digit year .
2-35 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports De vices Combine devices , Separate de vices , or Single device .
2-36 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports After f illing in the f ields in the Custom Report windo w , you can select one of the following actions: • Generate — Runs the report in a separate browser windo w .
2-37 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Figur e 2-24 Report T emplat es List If you select Sav e as T emplate in a custom report form that was created from a template, you can modify the template def inition if you keep the existing template name when prompted for the name.
2-38 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Figur e 2-25 Scheduled Repor ts Windo w Clicking Add Scheduled Report brings up the Add Scheduled Report windo w to add a ne w scheduled report.
2-39 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Figur e 2-26 Add Sc heduled Repor t Scheduled Report windows share man y commonalities .
2-40 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports T able 2-3 Scheduled Repor t Fields Field V alue Description Scheduled Report ID String containing alphanumeric characters including a hyphen (-) and underscore (_).
2-41 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Displaying Scheduled Reports Y ou can use the web-based UI to vie w scheduled reports.
2-42 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Figur e 2-27 Scheduled Repor ts F older Reporting Features Cisco NetFlow Collector enables you to sort, graph, export, f ilter , and drill do wn on report data from the Report windo w , as shown in Figure 2-22 .
2-43 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Sorting and Graphing Each column of a report supports ascending and descending sorting. Click on the column name to sort the table on that column.
2-44 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Reports Figur e 2-29 Sample Pie Graph Trending T rending reports can be launched from the Custom Report results windo w , as sho wn in Figure 2-30 .
2-45 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Status Export and Print The toolbar icons on the top right of the Report window allo w you to export and print report data. Click on the export icon to e xport a report in CSV or PDF format.
2-46 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Status Figur e 2-32 Status Windo w From this window you can select the follo wing: • Control,.
2-47 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Status Figur e 2-34 Health Monitor Statistics Windo w Clicking Refresh updates the statistics displayed in the windo w . Also, the form refreshes automatically e very 30 seconds.
2-48 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Status Clicking on Refresh updates the statistics sho wn.
2-49 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Status Logs The logs vie wable from the web-based UI are listed under the Logs folder in the navigation tree. Clicking on a specif ic log loads that log f ile into the browser windo w , as sho wn in Figure 2-37 .
2-50 Cisco NetFlow Collector User Guide OL-11399-01 Chapter 2 Using the NetFlow Collector User Interface Status.
デバイスCisco Systems OL-11399-01の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Cisco Systems OL-11399-01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCisco Systems OL-11399-01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cisco Systems OL-11399-01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cisco Systems OL-11399-01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cisco Systems OL-11399-01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCisco Systems OL-11399-01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cisco Systems OL-11399-01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCisco Systems OL-11399-01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。