ClarionメーカーDXZ578RUSBの使用説明書/サービス説明書
ページ先へ移動 of 42
English i DXZ578RUSB Français Deutsch Italiano Nederlands Español Svenska Português TEL :+49-6105-977-0 F AX :+49-6105-977-399 CE DECLARA TION OF CONFORMITY W.
English Français English ii DXZ578RUSB 2 DXZ578RUSB 331 DXZ578RUSB Deutsch Italiano Nederlands Español Svenska Português CONTROLS / LES COMMANDES / REGLER / CONTROLLI REGELAARS / CONTROLES / KONTRO.
English 3 DXZ578RUSB 1. PRECAUTIONS 1. This unit is applicable for on-road 4 wheel vehicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate.
English 4 DXZ578RUSB Handling Compact Discs Use only compact discs bearing the or mark. Do not play heart-shaped, octagonal, or other specially shaped compact discs.
English 5 DXZ578RUSB 2. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “ CONTROLS ” on page ii (unfold). Names of the Buttons and Their Functions [OPEN] button • Deeply push in [ OPEN ] button to unlock the flip down panel.
English 6 DXZ578RUSB Display Items LCD Screen In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature.
English 7 DXZ578RUSB 3. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Removing the DCP 1.
English 8 DXZ578RUSB 4. REMOTE CONTROL Functions of Remote Control Unit Buttons ∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main unit. ● Shared modes [SRC] button • Use to alternate operation mode among the various modes.
Functions of Remote Control Unit Buttons English 9 DXZ578RUSB ● CD/MP3/WMA/AAC and USB modes [BND] button • Press to play the first track. [ x ], [ v ] buttons • Press to move the tracks up and down. • Press and hold the button for 1 second or longer to perform fast-forward/fast-backward.
English 10 DXZ578RUSB Inserting the Battery 1 Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. 2 Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards.
English 11 DXZ578RUSB 5. OPERATIONS Note: • Be sure to read this chapter referring to the front diagrams of chapter “ CONTROLS ” on page ii (unfold). Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key.
Basic Operations English 12 DXZ578RUSB Adjusting Sound Mode ● Adjusting the subwoofer output volume You can adjust the volume output from the unit’s subwoofer output terminal. 2-1. Select the “ S-W VOL ”. 3-1. Press the [ UP ] or [ DN ] button to change the output volume.
Basic Operations English 13 DXZ578RUSB ● Q curve The Q curve becomes sharper when the numerical value is increased, and smoother when the numerical value is decreased. Flat frequency characteristics can be made by selecting a Q curve opposite to that of the curve to be compensated.
Basic Operations English 14 DXZ578RUSB ● Adjusting the balance 2-1. Select “ BALANCE ”. 3-1. Press the [ UP ] button to emphasize the sound from the right speaker, press the [ DN ] button to emphasize the sound from the left speaker. ∗ The factory default setting is “ CENTER ”.
English 15 DXZ578RUSB Radio Operations Listening to the radio 1. Press the [ SRC ] button and select the radio mode. The frequency or PS and PTY appears in the display. ∗ PS: Programme service name ∗ PTY: Programme type 2. Press the [ MENU ] button and select the radio band.
Radio Operations English 16 DXZ578RUSB Manual memory 1. Select the desired station with seek tuning or manual tuning. 2. Press the [ ] button to enter the preset memory mode. Press the [ UP ] or [ DN ] button to select a desired station, then press and hold the [ ] button for 2 seconds or longer to store the current station into preset memory.
English 17 DXZ578RUSB RDS Operations RDS (Radio Data System) This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data.
RDS Operations English 18 DXZ578RUSB TA (Traffic Announcement) In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it.
RDS Operations English 19 DXZ578RUSB PTY selecting 1. Press the [ OPTION ] button to switch to the RDS adjustment selection display. 2. Push the [ SEEK PANEL ] leftward or rightward to select “ PTY SELECT ”. 3. Press the [ ] button. 4. Press the [ UP ] or [ DN ] button to select the desired PTY.
English 20 DXZ578RUSB CD/MP3/WMA/AAC Operations MP3/WMA/AAC What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
CD/MP3/WMA/AAC Operations English 21 DXZ578RUSB ● Number of files or folders 1. Up to 255 files can be recognized per folder. Up to 510 files can be played. 2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.
CD/MP3/WMA/AAC Operations English 22 DXZ578RUSB Displaying CD titles This unit can display title data for CD-text/MP3/ WMA/AAC disc and user titles input with this unit. 1. Each time you press the [ D ] button, the title display changes in the following order: ● CD-TEXT disc Track ➜ Disc/Artist ➜ User ➜ Track .
CD/MP3/WMA/AAC Operations English 23 DXZ578RUSB Other various play functions 1. Press the [ OPTION ] button. ● Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc. 2. Push the [ SEEK PANEL ] leftward or rightward to select “ SCN ”.
English 24 DXZ578RUSB Operations Common to Each Mode ● Setting the contrast You can adjust the display contrast to match the angle of installation of the unit. ∗ The factory default setting is “ 7 ”. (Adjustment level: 1 to 16) 2-1. Select “ CONTRAST ”.
Operations Common to Each Mode English 25 DXZ578RUSB ● Setting the dimmer control You can set the dimmer control “ HIGH ”, “ MID ”, “ LOW ” or “ OFF ”. ∗ The factory default setting is “ MID ”. 2-1. Select “ DIMMER ”. 3-1. Press the [ UP ] or [ DN ] button to select “ HIGH ”, “ MID ”, “ LOW ” or “ OFF ”.
Operations Common to Each Mode English 26 DXZ578RUSB AUX function This system has an external input cable so you can listen to sounds and music from external devices connected to this unit.
English 27 DXZ578RUSB 6. OPERATIONS OF ACCESSORIES USB Operations USB memory device operation Note: • The following operations are the same as for CD mode: ∗ Pause ∗ Track selection ∗ Fast-for.
USB Operations English 28 DXZ578RUSB Connecting a USB memory device 1. Connect the USB memory device to the USB slot. Playback will begin from the first file recorded on the USB memory device. ∗ If the USB memory device is not recognized, press the [ SRC ] button to switch the source to the device.
English 29 DXZ578RUSB iPod BB Operations ● iPod BB This section describes operations when connected to a CeNET iPod Interface (EA- 1276E). (Hereinafter, “iPod Interface (EA- 1276E)” is abbreviated as iPod BB.) Note: • See the iPod BB Owner’s Manual for details regarding iPod BB connections and operation conditions.
iPod BB Operations English 30 DXZ578RUSB ● To cancel the trick play 2. Push the [ SEEK PANEL ] leftward or rightward to select “ RPT OFF ” or “ RDM OFF ”. 3. Press the [ ] button. Note: • When the all repeat play mode is canceled, playback will stop when all tracks have been played.
English 31 DXZ578RUSB CD Changer Operations Note: • The following operations are the same as for CD mode: ∗ Pause ∗ Track selection ∗ Fast-forward/fast-backward ∗ Scan play ∗ Repeat play ∗ Random play See “ CD/MP3/WMA/AAC Operations ” (page 20- 23) for details.
CD Changer Operations English 32 DXZ578RUSB ● Disc random play The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled. 1. Press the [ OPTION ] button.
English 33 DXZ578RUSB TV Operations Note: • The following operations are performed the same as for radio mode: ∗ Channel selection ∗ Storing channels in memory ∗ Calling channels from memory ∗ Auto store ∗ Preset scan See “ Radio Operations ” (page 15-16) for details.
English 34 DXZ578RUSB Digital Radio / DAB Operations DAB control function When a CeNET cable is used to connect a DAB (DAH923) (sold separately), all functions can be operated. Listening to the DAB station 1. Press the [ SRC ] button to select the DAB mode.
Digital Radio / DAB Operations English 35 DXZ578RUSB 5. Press the [ UP ] or [ DN ] button to select a desired programme. Press and hold the [] button for 2 seconds or longer to store the programme. Note: • The interrupt programme (PTY or INFO) cannot be written into a manual memory.
Digital Radio / DAB Operations English 36 DXZ578RUSB ● AF function between RDS and DAB When the same programme is broadcasted by both RDS and DAB, and this function is ON, the unit switches to receive the broadcast with the better reception automatically.
English 37 DXZ578RUSB 7. IN CASE OF DIFFICULTY Problem Cause Measure General Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring.
English 38 DXZ578RUSB USB No sound heard The USB memory device contains no MP3/WMA/AAC files. Record MP3/WMA/AAC files properly to the USB memory device. The files are not proper MP3/ WMA/AAC format. Use only properly encoded MP3/WMA/AAC files. Files are DRM copyright protected.
English 39 DXZ578RUSB 8. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. If an error display other than the ones described above appears, press the reset button.
English 40 DXZ578RUSB 9. SPECIFICATIONS Radio section Tuning System: PLL synthesizer tuner Receiving Frequencies: FM : 87.5 to 108 MHz (0.05 MHz steps) MW : 531 to 1602 kHz (9 kHz steps) LW : 153 to 2.
English Français English ii DXZ578RUSB 2 DXZ578RUSB 331 DXZ578RUSB Deutsch Italiano Nederlands Español Svenska Português CONTROLS / LES COMMANDES / REGLER / CONTROLLI REGELAARS / CONTROLES / KONTRO.
English i DXZ578RUSB Français Deutsch Italiano Nederlands Español Svenska Português TEL :+49-6105-977-0 F AX :+49-6105-977-399 CE DECLARA TION OF CONFORMITY W.
デバイスClarion DXZ578RUSBの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Clarion DXZ578RUSBをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはClarion DXZ578RUSBの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Clarion DXZ578RUSBの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Clarion DXZ578RUSBで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Clarion DXZ578RUSBを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はClarion DXZ578RUSBの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Clarion DXZ578RUSBに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちClarion DXZ578RUSBデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。