ClarityメーカーD703の使用説明書/サービス説明書
ページ先へ移動 of 25
User Guide Clarity , a Division of Plantr onics, Inc. 4289 Bonny Oaks Driv e, Chattanooga,TN 37406 T el: 800-426-3738 Fax: 800-325-8871 E-mail: claritycs@plantronics.com W ebsite: www .claritypr oducts.com ©2011 Clarity , a Division of Plantronics, Inc .
1 Important Safety Instructions.........................................................4 INST ALLA TION Installing your phone.........................................................................8 Installing/Charging batteries.....................
2 3 DIRECT OR Y Add a Ne w Directory Entr y ..........................................................26 View a Dir ector y Entr y ...................................................................26 Sear ch a Directory Entr y by Name................
4 5 Privacy of commu nications ma y not be e nsured when using this phone. W arning: T o main tain the com pliance wit h the FCC’ s RF exposur e guid eline, place t he base unit at least 2 0 cm fr om nearb y persons. W arning: T o r educe the risk of r e or inj ur y to per sons, read a nd follo w these instruc tions.
6 7 cause t emporary or permane nt damage to your hearing. Although ther e is n o single volume setting tha t is appr opriate for ev er yone, you should al wa ys use yo ur telephone with the v olume s et at moder ate lev els and av oid pr olonge d exposur e to hi gh vol ume sound le vel s.
8 9 Connecting the base station 1) Plug the pow er supply & line cord into the base station. 2) Plug the other end of pow er supply & line cord into the wall sock et, as shown. 3) Alwa ys use the cables provided in the bo x. 1) Slide out the batter y compartment cover .
10 11 HANDSET OVER VIEW 1. RD/P (REDIAL / P AUSE) • In idle mode , press r epeatedly to view the last numbers dialed • While entering numbers, press and hold to insert a dialing pause (P) 2. AUDIO BOOST During a call, press to enhance the clarity and loudness of y our caller’ s v oice .
12 13 6. V OLUME DOWN / CALL LOG / SCR OLL DOWN • In menu mode: Press to scr oll down the menu items. • During a call, pr ess to decrease listening v olume . • In idle mode , press to access the call list. • While entering names or numbers in the directory , press to mov e the cursor to the left.
14 15 The screen displa y gives y ou information on the curr ent status of the telephone. The speak erphone is turned on. While re viewing the call list history , missed calls that ha ve not been r eview ed. The ringer is switched off. New v oicemail receiv ed from the telephone service pro vider (network subscription is r equired).
16 17 MENU STRUCTURE In idle mode, press <MENU/SELECT>, then <UP/DO WN> to bro wse the menu items. Refer to the following f or the menu structure. Main Menu Dir ectory Call log Inter com Sub menu Review Add contact Speed dial Review Delete all calls (Displa yed only when two or mor e handsets register ed.
18 19 Audio T one Settings Use this featur e to change the quality of the audio of the handset to best suit your hearing. While you ar e on a call, press T ONE repeatedly to select an equalizer setting: Bass, Natur al, Tr e ble 1 or T r eble 2 , (the default setting is Natural ).
20 21 Mak e a Call 1. Pre-dialing Enter the phone number rst, then press <T ALK ON/FLASH> or <SPEAKER> to dial out the number . Pr ess <T ALK OFF/CLEAR> or <MUTE/X> to clear the entr y . 2. Direct Dialing Press <T ALK ON/FLASH> or <SPEAKER> to access dial tone, then enter the phone number .
22 23 Chain dialing This featur e allows you to initiate a dialing sequence fr om numbers stored in the directory , call log or r edial list while you are on a call. Chain dialing can be useful if you wish to access n umbers other than phone numbers (such as bank account information or access codes) fr om the directory , call log or r edial list.
24 25 Find the Handset Y ou can use the handset locator feature to nd misplaced handsets. T o start the paging tone: Press <FIND> on the telephone base. All the register ed handsets will ring, and the ** P a ging** is ashing on handset screen.
26 27 Y our phone can store up to 100 dir ector y entries with names and numbers. Each directory entr y can ha ve a maximum of 30 digits for the phone n umber and 15 characters for the name. Add a New Dir ectory Entry 1. In idle mode, press <MENU/SELECT>, then <UP/DO WN> to select Dir ectory .
28 29 Edit a Dir ectory Entry 1. In idle mode, press <UP> to access the dir ector y . -OR- Press<MENU/SELECT>, then <UP/DO WN> to select Dir ectory , then press <MENU/SELECT> twice to select R eview . 2. Press <UP/DO WN> to select the directory entr y or search a directory entr y by name.
30 31 Note: If the speed dial location you selected is empty , the screen sho ws the speed dial list instead. Delete a Speed Dial Number 1. In idle mode, press <MENU/SELECT>, then <UP/DO WN> to select Dir ectory . 2. Press <MENU/SELECT>, then <UP/DO WN> to select Speed dial .
32 33 Reasons for missing CID information Scr een message Reason Pr ivate name The caller prefers not to sho w the name Pr ivate number The caller prefers not to sho w the telephone number .
34 35 Y our phone comes with a selection of settings that you can change to personalize your phone the wa y you lik e it to work. L CD La nguage Settings Y ou can select the language used for all screen displa ys. 1. In idle mode, press <MENU/SELECT>, then <UP/DO WN> to select Settings .
36 37 Set the Ringer T one 1. Press <MENU/ SELECT>, then <UP/DO WN> to select Ringers. 2. Press <MENU/SELECT>, then <UP/DO WN> to select Ringer tone . 3. Press <MENU/SELECT>, then <UP/DO WN> to select the desired ringer tone (a total of 10 melodies for y our selection) for setting ringer tone for external calls.
38 39 Y our telephone can suppor t up to ve cor dless handsets. The additional handset(s) needs to register with the telephone base bef ore use - D703HS™. Y ou must register each ad ditional handset separately . The handsets pro vided within your pr oduct box are alr eady register ed as HANDSET 1 and so forth.
40 41 If you ha ve difculty with your telephone, please tr y the suggestions below . My telephone doesn ’t wor k at all • Mak e sure the pow er cord is securel y plugged in. • Mak e sure that the battery connector is securely plugged into the cordless handset.
42 43 "Out of range or no pwr at base" appears on my cor dless handset • Ensure that the telephone base is po wered up . • Place the cordless handset in the telephone base f or one minute to allow the cordless handset and base to synchr onize.
44 45 My caller ID isn’t working • Caller ID is a subscription ser vice. Y ou must subscribe to this service from y our telephone ser vice pr ovider for this featur e to work on y our telephone. • Y our caller must be calling from an ar ea that supports caller ID .
46 47 Ampli ed dB Lev el : 35 dB Dimensions • Handset Size: 7” x2 1/4” x 1 1/2” (H x W x D) • Base Size: 2 1/4” x 4 1/2” x 4 1/4” (H x W x D) W eight • Handset W eight: 6.
デバイスClarity D703の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Clarity D703をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはClarity D703の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Clarity D703の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Clarity D703で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Clarity D703を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はClarity D703の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Clarity D703に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちClarity D703デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
