ClevoメーカーM860TUの使用説明書/サービス説明書
ページ先へ移動 of 100
.
.
Preface I Preface Notebook Computer M860TU Service Manual.
Preface II Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor.
Preface III Preface About this Manual This manual is intended for service personnel who have comp leted sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic informa tion for servicing and/or upgrading components of the M860TU se- ries notebook PC.
Preface IV Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to per- sons when using any electrical equipment: 1.
Preface V Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: 1. Don’t drop it, or expose it to shock. If the computer falls, the case an d the components could be damaged.
Preface VI Preface 4. A void interference. Keep the computer away from high capacity tr ansformers, electric motors, and other strong mag- netic fields. These can hinder proper performance and damage your data. 5. T ake care when using peripheral devices .
Preface VII Preface Battery Precautions • Only use batteries designed for this computer . The wrong battery type may explode, leak or damage the computer . • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twis ted) in any way .
Preface VIII Preface Related Documents You may also need to consult the following manual for additional information: User’s Manual on CD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro- gram.
Preface IX Preface Contents Introduction .............................................. 1-1 Overview ......................................................................................... 1-1 System Specifications ..................................
Preface X Preface Card Reader & 1394 JMB380 ...................................................... B-21 New Card, CCD, Fan ................................................................... B-22 KBC-ITE IT8512 ....................................
Introduction Overview 1 - 1 1.Introduction 1: Introduction Overview This manual covers the information you need to service or upgrade the M860TU series notebook computer. Information about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual .
Introduction 1 - 2 System Specifications 1.Introduction System Specifications Feature Specification Processor T ypes Intel® Core™2 Duo Processor (478-pin) Micro-FC-P GA Package, Socket P T9400/ T9600 45nm (45 Nanometer) Process T echnology 6MB On-die L2 Cache & 1066MHz FSB (35W) 2.
Introduction System Specifications 1 - 3 1.Introduction Video Adapter Options NVIDIA GeForce 9600M GS PCI-E Video Card 256MB GDDR3 Video RAM On Board MS DirectX® 10.0 Compatible MXM-II Supports HDCP NVIDIA GeForce 9800M G T PCI-E V ideo Card 512MB GDDR3 Video RAM On Board MS DirectX® 10.
Introduction 1 - 4 System Specifications 1.Introduction I/O Port s Four USB 2.0 Ports One Combined eSA T A Port/USB Port eSA T A Port (hot swapping supported in Windows V ista only): AHCI mode supports hot swapping IDE mode does not support hot swapping One HDMI (High-Definition Mult imedia Interface) Port with 5.
Introduction System Specifications 1 - 5 1.Introduction Power Full Range AC/DC Adapter – AC in 100 - 240V , 50 - 60Hz DC Output 20V , 6A (120 W a tts) Easy Changeable 8-Cell Smart Li thium-Ion 4400m.
Introduction 1 - 6 External Locator - Top View with LCD Panel Open 1.Introduction External Locator - Top View with LCD Panel Open Figure 1 Top View 1. Optional Built-In PC Camera 2. LCD 3. Hot Key Buttons 4. Power Button 5. S peakers 6. Keyboard 7. Built-In Microphone 8.
Introduction External Locator - Front and Rear View 1 - 7 1.Introduction External Locator - Front and Rear View 1 2 3 4 5 Figure 2 Front View 1. Headphone-Out Jack 2. Microphone-In Jack 3. S/PDIF-Out Jack 4. Mini-IEEE 1394 Port 5. LED Indicators Figure 3 Rear View 1.
Introduction 1 - 8 External Locator - Left & Right Side View 1.Introduction External Locator - Left & Right Side View 1 Figure 4 Left Side View 1. Optional Device Drive Bay (for CD/DVD Device) Figure 5 Right Side View 1. Express Card Slot 2. 7-in-1 Card Reader 3.
Introduction External Locator - Bottom View 1 - 9 1.Introduction External Locator - Bottom View Figure 6 Bottom View 1. V ent/Fan Intake/ Outlet 2. Battery 3.
Introduction 1 - 10 Mainboard Overview - Top (Key Parts) 1.Introduction Mainboard Overview - Top (Key Parts) Figure 7 Mainboard Top Key Parts 1. ITE 2.
Introduction Mainboard Overview - Bottom (Key Parts) 1 - 11 1.Introduction Mainboard Overview - Bottom (Key Parts) Figure 8 Mainboard Bottom Key Parts 1. CPU Socket (no CPU installed) 2. Mini-PCIe Socket (3G Module) 3. Mini-PCIe Socket (Wireless Lan Module) 4.
Introduction 1 - 12 Mainboard Overview - Top (Connectors) 1.Introduction Mainboard Overview - Top (Connectors) Figure 9 Mainboard Top Connectors 1. LED Cable Connector 2. Inverter Board Cable Connector 3. Keyboard Cable Connector 4. T ouchPad Cable Connector 5.
Introduction Mainboard Overview - Bottom (Connectors) 1 - 13 1.Introduction Mainboard Overview - Bottom (Connectors) Figure 10 Mainboard Bottom Connectors 1. DC-In Jack 2. eSA T A + USB Port 3. HDMI Port 4. DVI-Out Port 5. RJ-1 1 Jack 6. RJ-45 Jack 7.
Introduction 1-1 4 1.Introduction.
Disassembly Overview 2 - 1 2.Disassembly 2: Disassembly Overview This chapter provides step-by-step instructions for disassembling the M860TU series notebook’s parts and subsystems. When it comes to reassembly, reverse the procedures (unless otherwise indicated).
Disassembly 2-2O v e r v i e w 2.Disassembly NOTE : All disassembly procedures assume that the system is turned OFF , and disconnected from any power supply (the battery is removed too). Maintenance Tools The following tools are recommended when working on the notebook PC: • M3 Philips-head screwdriver • M2.
Disassembly Overview 2 - 3 2.Disassembly Maintenance Precautions The following precautions are a reminder. To avoid personal in jury or damage to the computer while performing a re- moval and/or replacement job, take the following precautions: 1. Don't drop it .
Disassembly 2 - 4 Disassembly Steps 2.Disassembly Disassembly Steps The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM THE DISASSEMBLY STEPS IN THE ORDER INDICATED. To remove the Battery: 1.
Disassembly Removing the Battery 2 - 5 2.Disassembly Removing the Battery 1. Turn the computer of f, and turn it over . 2. Slide latch towards the unlock symbol and hold it in plac e, and lift the battery up and out of the battery bay . 2. Battery 1 2 Figure 1 Battery Removal a.
Disassembly 2 - 6 Removing the Hard Disk Drive 2.Disassembly Removing the Hard Disk Drive The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm (h).
Disassembly Removing the Hard Disk Drive 2 - 7 2.Disassembly 6. Remove screws - from the hard disk assembly . 7. Pull the hard disk assembly in the direction of the arrow . 8. Carefully remove the hard disk asse mbly in the direction of the arrow . 9.
Disassembly 2 - 8 Removing the Optical (CD/DVD) Device 2.Disassembly Removing the Optical (CD/DVD) Device 1. Tu rn off the computer , turn it over and remove the battery ( page 2 - 5 ) and component bay cover ( page 2 - 6 ). 2. Remove the screw at point , and use a screwdriver to ca refully push out the optical device at point out of the computer .
Disassembly Removing the System Memory (RAM) 2 - 9 2.Disassembly Removing the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting DDRIII (DDR3) Up to 1066 MHz. The main memory can be expanded up to 4GB.
Disassembly 2 - 10 Removing and Installing a Processor 2.Disassembly Removing and Installing a Processor Processor Removal Procedure 1. Tu rn off the computer , turn it over , and remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 6 ).
Disassembly Removing and Installing a Processor 2 - 11 2.Disassembly 5. Turn the release latch towards the unlock symbol to release the CPU. 6. Carefully (it may be hot) lift the CPU up and out of the socket ( Figure 7e ). 7. Reverse the process to install a new CPU.
Disassembly 2 - 12 Removing and Installing a Processor 2.Disassembly Processor Installation Procedure 1. Insert the CPU , pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!), and turn the release latch towards the lock symbol ( Figure 8b ).
Disassembly Removing the VGA Card 2 - 13 2.Disassembly Removing the VGA Card 1. Tu rn off the computer , turn it over , and remove the battery ( page 2 - 5 ), the component bay cover ( page 2 - 6 ) and the CPU heat sink ( page 2 - 10 ). 2. The VGA Card(s) will be visible at point on the mainboard.
Disassembly 2 - 14 Removing the 3G Module 2.Disassembly Removing the 3G Module 1. Turn off the computer , turn it over , and remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 6 ). 2. The 3G module will be visible at point on the mainboard.
Disassembly Removing the Wireless LAN Module 2 - 15 2.Disassembly Removing the Wireless LAN Module 1. Tu rn off the computer , turn it over , and remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 6 ). 2. The wireless LAN module will be visi ble at point on the mainboard.
Disassembly 2 - 16 Removing the Bluetooth Module 2.Disassembly Removing the Bluetooth Module 1. Tu rn off the computer , turn it over , and remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 6 ). 2. The Bluetooth module will be visible at point on the mainboard.
Disassembly Removing the Inverter Board 2 - 17 2.Disassembly Removing the Inverter Board 1. Tu rn off the computer , and remove the battery ( page 2 - 5 ). 2. Remove any rubber covers, screws - and hinge covers - ( Figure 13 a ), then run your finger around the middle of the frame to carefully unsnap the LCD front panel module from the back.
Disassembly 2 - 18 Removing the Keyboard 2.Disassembly Removing the Keyboard 1. Tu rn off the computer , and remove the battery ( page 2 - 5 ). 2. Press the four keyboard latches at the top of the keyboard to elevate the keyboard from its normal position (you may need to use a small screwdriver to do this).
Disassembly Removing the Modem 2 - 19 2.Disassembly Removing the Modem 1. Tu rn off the computer , turn it over and remove the battery ( page 2 - 5 ), hard disk ( page 2 - 6 ), optical device ( page 2.
Disassembly 2 - 20 Removing the Modem 2.Disassembly 4. Carefully lift the top case ( Figure 16e ) up and of f the computer . 5. Remove screws - from th e modem and disconnect cable . 6. Lift the modem ( Figure 16g ) up and off the computer . 30 31 32 33 34 30.
Part Lists A-1 A.Part Lists Appendix A:Part Lists This appendix breaks down the M860TU series notebook’s construction into a se ries of illustrations. The component part numbers are indicated in the tables opposite the drawings. Note: This section indicates the manufacturer’s part numbers.
Part Lists A - 2 Part List Illustration Location A.Part Lists Part List Illustration Location The following table indicates where to find the appropriate part list illustration.
Part Lists Top without Fingerprint A - 3 A.Part Lists Top without Fingerprint Figure A - 1 Top without Fin- gerprint 無鉛 無鉛 加色粉 無鉛 切除按鍵上方 無鉛 無鉛 無鉛 加切 理線槽 無鉛 卡鉤加至0.
Part Lists A - 4 Top with Fingerprint A.Part Lists Top with Fingerprint Figure A - 1 Top with Finger- print 無鉛 無鉛 加色粉 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無.
Part Lists Bottom A - 5 A.Part Lists Bottom Figure A - 2 Bottom 無鉛 無鉛 無鉛 黑色 惠貿 無鉛 藍天3 互億 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 .
Part Lists A - 6 LCD A.Part Lists LCD Figure A - 3 LCD 無鉛 (加背膠) 無鉛 無鉛 惠貿 無鉛 無鉛 無鉛 無鉛 無鉛 無鉛 水電鍍 無鉛 無鉛 無鉛 中性 加背膠 無鉛 無鉛 (.
Part Lists DVD-ROM Drive A - 7 A.Part Lists DVD-ROM Drive 無鉛 無鉛 無鉛 無鉛 無鉛 Figure A - 4 DVD-ROM Drive.
Part Lists A - 8 Combo Drive A.Part Lists Combo Drive 無鉛 無鉛 無鉛 無鉛 Figure A - 5 Combo Drive.
Part Lists HDD A - 9 A.Part Lists HDD 無鉛 (無鉛) Figure A - 6 HDD.
Part Lists A - 10 A.Part Lists.
Schematic Diagrams B-1 B.Schematic Diagrams Appendix B:Schematic Diagrams This appendix has circuit diagrams of the M860TU notebook’s PCB’s. The following table indicates where to find the appropriate schematic diagram. Diagram - Page Diagram - Page Diagram - Page SYSTEM BLOCK DIAGRAM - Page B - 2 ICH9-M 4/4, Po wer - Page B - 17 Power 1.
Schematic Diagrams B - 2 SYSTEM BLOCK DIAGRAM B.Schematic Diagrams SYSTEM BLOCK DIAGRAM Sheet 1 of 42 SYSTEM BLOCK DIAGRAM DD R3 SD RA M SO CK E T S O- DIM M1 5. 1 C HA NN EL OU T A P A2 05 6 Mi ni C ARD 14.3 18 M Hz LA N I NT. SP K US B0 F ING ER P RI NT ER BO AR D USB _ Co nn.
Schematic Diagrams Penryn 1/2 B - 3 B.Schematic Diagrams Penryn 1/2 Lay out Note: H_ DS T B N # 1 4 H _A #16 R 3 73 * 1 0m i l _s h or t C PU_BSEL 1 18 H_ D ST BP # 1 4 H _D #59 H _D #61 H_ D# 7 H _A #28 R 3 91 * 10 K_04 1. 05 V S H _D #44 H_ D# 2 9 H_ RE Q# 2 H_ BP RI# 4 H_ D# 1 6 H_ PR DY# H_ D# 1 9 R 3 58 56_0 4 3.
Schematic Diagrams B - 4 Penryn 2/2 B.Schematic Diagrams Penryn 2/2 Sheet 3 of 42 Penryn 2/2 1. 0 5VS C9 2 1 0u_ 10V _ 08 VCO R E 1. 5VS 9, 1 3, 16, 2 1, 23 ,33, 3 6 Lay out not e: C9 4 0. 1u _10V_ 04 H_ V I D3 3 5 C 433 * 10u _10V_ 08 C1 1 5 1u_ 6. 3V_0 4 1.
Schematic Diagrams Cantiga 1/6, Host B - 5 B.Schematic Diagrams Cantiga 1/6, Host Sheet 4 of 42 Cantiga 1/6, Host H_ D# 4 3 PC Ie Gr aphi c s Lan e H_ D# 9 C FG 6 H_ C P US L P # 2 H _A#12 Low = D MI x 2 H i gh = D MI x4 (De f a ul t) 10 mil s H_ A# 9 H_ DR DY # 2 H_ B R 0 # 2 H_ D# 1 H_ D# 7 1.
Schematic Diagrams B - 6 Cantiga 2/6, PEG B.Schematic Diagrams Cantiga 2/6, PEG Sheet 5 of 42 Cantiga 2/6, PEG DM I_ T X P3 1 4 H_ DPRS T P# 2, 1 3,3 5 M_ V R E F _ M C H M _ CL K_ DDR 2 1 1 GM_ DAC _ B 28 PEG _ TXN8 R 109 * 10m i l _s h or t 3. 3 VS PEG _ TXP 6 C 1 55 0.
Schematic Diagrams Cantiga 3/6, DDR B - 7 B.Schematic Diagrams Cantiga 3/6, DDR Sheet 6 of 42 Cantiga 3/6, DDR M _A _D Q14 M _A _D Q2 M _A _D Q52 M_ A_ A9 M _A _D Q9 M _B _A6 M_B_D Q S3 # 11 M _B _A9 .
Schematic Diagrams B - 8 Cantiga 4/6, Power 1 B.Schematic Diagrams Cantiga 4/6, Power 1 Sheet 7 of 42 Cantiga 4/6, Power 1 C 20 8 . 1u_16 V _ 04 C 2 09 . 47U _10V_04 C 197 * .1U _1 0V_X 7R _ 04 VG FX_ CO RE VG F X _ C O R E V C CS M _37 C 2 19 22u_ 6.
Schematic Diagrams Cantiga 5/6, GND B - 9 B.Schematic Diagrams Cantiga 5/6, GND Sheet 8 of 42 Cantiga 5/6, GND PVT R130 *1 0mi l_sh or t Z 0802 VSS U25I CANTI G A AU4 8 A23 AR4 8 AL48 BB 4 7 AW 4 7 AN.
Schematic Diagrams B - 10 Cantiga 6/6, Power 2 B.Schematic Diagrams Cantiga 6/6, Power 2 Sheet 9 of 42 Cantiga 6/6, Power 2 V C C A _D PLLA +VC C P _G M C H VC CA_HPL L C 485 * .1u_ X 7R _04 C 500 .1 U_ X7 R _ 0 4 5mA 1 . 05VM _P E G P L L 3. 3 V S C 126 * .
Schematic Diagrams DDR3 SO-DIMM 1 B - 11 B.Schematic Diagrams DDR3 SO-DIMM 1 M_ A _ DQ 1 4 M _ A_ D Q S3 6 C3 0 2 . 1 u_10 V _ 04 CLOSE TO SO -DIMM _0 M_ A _ DQ 5 0 M_ A _ DQ 4 6 C3 1 6 1 0u_1 0V _ 08 M _ A_ C AS# 6 M_ A _ B S 0 # 6 V T T _ M E M_ D I MM 0 M_ A _ DQ 4 3 M_ A _ DQ 2 5 M_ A _ DQ 1 8 M_ A _ DQ 3 9 C2 9 7 2.
Schematic Diagrams B - 12 DDR3 SO-DIMM 2 B.Schematic Diagrams DDR3 SO-DIMM 2 1. 5V M_ B _ D Q 2 6 1. 5 V _D I M M 1 M _ B_ CAS# 6 M_ B _ A 9 M _ B_ R AS# M _ B_ RAS# 6 C3 2 6 * .
Schematic Diagrams LCD B - 13 B.Schematic Diagrams LCD Sheet 12 of 42 LCD EN _ PL VD D LV D S_U 2N Q4 6 2N 70 0 2 W G D S R 643 0_0 4 LV D S_L1P LV D S_LC LK N R2 8 * 100 K _04 EX_ L VD S_ U1P LV D S_U 0P R 61 * 2. 2K_0 4 J_L CD1 E X _LV D S_L1 P 3 7 L VD S _L 1P R3 4 0 * 4 .
Schematic Diagrams B - 14 ICH9-M 1/4, SATA B.Schematic Diagrams ICH9-M 1/4, SATA Sheet 13 of 42 ICH9-M 1/4, SATA S A TA _R X N 1_C SATA_ RXP1 _ C 17 HDA_ S D IN3 Z1 310 RT C VCC S A T A _LE D # 24 H_ I NT R 2 R 447 24 .
Schematic Diagrams ICH9-M 2/4, PCI, USB B - 15 B.Schematic Diagrams ICH9-M 2/4, PCI, USB Sheet 14 of 42 ICH9-M 2/4, PCI, USB SPI_SI PC I_ REQ 2 # PC L K_ IC H U SB_ O C10 # PCI _ REQ 3# PC I- Ex pr ess Di re ct M edi a In te rfa ce US B SP I U1 5 D IC H9 M R EV 1 .
Schematic Diagrams B - 16 ICH9-M 3/4 B.Schematic Diagrams ICH9-M 3/4 R4 5 9 1 00K_04 MX M_ P W R O K 3. 3V S 5V VG A_ SEL # 1 2 ,28 SB_ SU SST AT # R5 3 1 1 0 K_ 0 4 MP WR OK P M _C LKR U N# PM _ IC H _ PW R O K SW I# Z15 1 6 3. 3V R 530 0_ 04 PM _ PW R O K 2 2 ,28 ICH _ G P IO 4 9 R 4 73 8.
Schematic Diagrams ICH9-M 4/4, Power B - 17 B.Schematic Diagrams ICH9-M 4/4, Power Sheet 16 of 42 ICH9-M 4/4, Power C 274 . 1 u_16 V _ 04 PV T Z160 9 CL OS E T O pi n A 23 T P _ VC C C L _105 Z16 1 8 C6 8 9 . 1u_ 10V_0 4 D1 4 S C S 7 51V- 40 A C 1. 5VS TP _VC C S U S105_ I C H 2 C 680 .
Schematic Diagrams B - 18 ODD, USB2.0 & eSATA B.Schematic Diagrams ODD, USB2.0 & eSATA SATAT X P4 13 C 202 0. 01U _X 7R _04 5V S R 2 97 * 0 _04 US B _ O C 3 # 14 C7 6 6 22u_ 6.
Schematic Diagrams Clock Generator B - 19 B.Schematic Diagrams Clock Generator Sheet 18 of 42 Clock Generator C 5 40 * 1 0p _ N P O _0 4 R 405 10K _ 04 M CH _ BSEL 1 5 CLK_ PCIE_CR 20 FS L A C 5 03 * .
Schematic Diagrams B - 20 PCI-E LAN RTL8111C, RJ45RJ11 B.Schematic Diagrams PCI-E LAN RTL8111C, RJ45RJ11 Sheet 19 of 42 PCI-E LAN RTL8111C, RJ45RJ11 Z1922 MD I O 0 + ??? ?? ?? ?? Z193 6 R 353 75 _04 4.
Schematic Diagrams Card Reader & 1394 JMB380 B - 21 B.Schematic Diagrams Card Reader & 1394 JMB380 SDW P 1 3 9 4 _ TPBIAS0 MD I O 7 MD I O1 3 N ote: C lose to JMB 380 EM I 139 4_T P A 0 - MD _ C L K C6 9 3 . 1 u_1 6V _04 MD I O0 R 50 8 56_ 04 3.
Schematic Diagrams B - 22 New Card, CCD, Fan B.Schematic Diagrams New Card, CCD, Fan Sheet 21 of 42 New Card, CCD, Fan PCI _RST# 14 Q4 9 ND S3 5 2 AP_ N L G D S R 4 15 4.
Schematic Diagrams KBC-ITE IT8512 B - 23 B.Schematic Diagrams KBC-ITE IT8512 L ED_ P W R# 24 BAT1 _ DET 29 KBC _ AG ND VG A1 _ FANSEN 3 7 KBC_SPI_SI C HG_ CU RS EN LP C _ A D 1 13, 38 80P O R T _D E T.
Schematic Diagrams B - 24 HDMI, 3G B.Schematic Diagrams HDMI, 3G Sheet 23 of 42 HDMI, 3G USB_PN1 0 1 4 JH D M I _D 0# EX_ HD M I_DATA2 R6 7 7 3. 9 K_04 R 431 * 10m i l _s hor t DVT 5V S _H D M I JH D M I _D 2# PCI E_ RXP1_ 3 G 14 EX_HD M I_ DATA1 # 37 Z36 27 EX_ HD M I_ H PD_R R 433 * 0_ 0 4 + C2 6 4 22 0U _ 4V _D 2 3.
Schematic Diagrams LED, Screw Hole B - 25 B.Schematic Diagrams LED, Screw Hole Sheet 24 of 42 LED, Screw Hole Z24 1 5 3. 3V S D2 2 B W -1 7 1 UY G-C T A C 1 H_ ST 8 * M TH 7_0D 2_7 2 3 4 5 6 VD D3 2 ,.
Schematic Diagrams B - 26 Azalia CODEC ALC662 B.Schematic Diagrams Azalia CODEC ALC662 Sheet 25 of 42 Azalia CODEC ALC662 L_ H P_ O U T_A AU DG U1 3 pin 1 ~ pin 1 1 a nd pi n 47 an d p in 48 ar e Dig it al sig na ls. Th e oth er s a re An alo g sig na ls.
Schematic Diagrams Audio AMP B - 27 B.Schematic Diagrams Audio AMP Sheet 26 of 42 Audio AMP 5 VS_ AM P L_ H P _ O U T _ A 25 SP KO U TL + 3 8 PVT : D e l R 58 4 AU DG VB T L # 25 J H E A DP HO NE - L 2 5 AU DG R_ H P_ OU T _ C L _ HP _ O UT _ C J HE A DP HO NE - L MU T E A P M # R5 5 8 * 10m il _ shor t M U TEAPM # C 743 4.
Schematic Diagrams B - 28 SRS, MDC, BT B.Schematic Diagrams SRS, MDC, BT PIN 31B AS SBY PB OPE N - - - > T r u e Ba s s 6 d B Z2822 VC C_BT Z27 5 2 Z2707 C 7 4 5 1U _6 .
Schematic Diagrams DVI, INV B - 29 B.Schematic Diagrams DVI, INV Sheet 28 of 42 DVI, INV EX_ D AC_ R VG A _ SEL # 12 , 15 40 m il EX_ DAC _ R 37 R 669 0_ 04 DA C _ B C 4 10 2 2 0 p_ 5 0V _0 4 EX_ D VI_ D ATA0 # 37 FR ED DA C _ G I NV ER TE R CO NN EC TO R EX_ D AC_ VSYN C 37 3.
Schematic Diagrams B - 30 Power Charger, DC-In B.Schematic Diagrams Power Charger, DC-In Z29 0 7 P C 9 7 0. 1u _50 V_06 P R 99 * 1 0 0K _06 PR13 10 K _ 0 4 MP C 1 4 . 7u_2 5V_08 P I N GN D 1 ~ 5 = G ND PQ 1 SI48 3 5 BD Y- T1 -E3 4 6 2 5 7 3 1 8 PC 1 2 0.
Schematic Diagrams Power GPU B - 31 B.Schematic Diagrams Power GPU Sheet 30 of 42 Power GPU D FG T _V ID _1 5 GP U PJ 6 20 m il 1 2 G PU VCC SEN SE 7 11 /29 no st uff P C 14 6 * 56 0p_ X 7R _04 PC16 4 * .
Schematic Diagrams B - 32 Power 1.5V/0.75V B.Schematic Diagrams Power 1.5V/0.75V + PC83 * 220 u_4V _D PD 2 3 FM 58 22 A C 1. 5V_P W R G D 5, 15 P C 224 1u_6. 3 V _0 4 6- 19 -41 00 1-2 33 P R 201 * 0 _04 + PC 7 2 * 150 u_6 . 3 V _V PC 2 1 1 100p_50 V _0 4 Rb DV T 5V PJ 1 2 OP E N_ 6 A 1 2 PR21 1 23 .
Schematic Diagrams Power 3.3VM/1.8VS/1.05VM B - 33 B.Schematic Diagrams Power 3.3VM/1.8VS/1.05VM P C 185 . 1 u_16 V _04 EM I PC 5 2 4. 7u _25 V _ 08 P C 4 1 0.
Schematic Diagrams B - 34 Power 3VS/5VS / Power S/W B.Schematic Diagrams Power 3VS/5VS / Power S/W 6 -15 -044 68-7 B0 VD D3 SYS _ PW R G D 1 5 POW ER SWIT CH EN_1 .5 VS PR 6 1 100 K_04 PO WE R SW P C 80 1 0 u_ 1 0V _0 8 C3 2 8 . 1 u_1 6V_04 1. 0 5VS 2, 3 , 4, 5, 9, 1 3, 16, 1 8 Q3 5 2N 700 2W G D S VD D3 PR 4 3 100 K_04 1.
Schematic Diagrams Power VDD3/VDD5/3.3V/5V B - 35 B.Schematic Diagrams Power VDD3/VDD5/3.3V/5V PR15 7 100K _ 04 PI N 2 9 = SGND 4 SYS1 5 V SY S1 5 V 5V PR 2 1 8 *1 0 K _ 0 4 P R 48 10 _04 SG ND 4 Z34 0 1 6- 06 -0 054 0- 021 SYS1 0 V Z3 4 29 PC 9 1 0.
Schematic Diagrams B - 36 Power VCORE B.Schematic Diagrams Power VCORE 3. 3 V S 2, 3 , 5 , 9, 12, 1 3, 14, 15 , 16, 19, 2 0, 21, 2 2, 23, 24 , 2 5, 26 , 2 8,30, 3 2,33, 36 , 37, 38 DR P+ VCO R E_ H YS + PC14 4 33 0u_2 .
Schematic Diagrams Mini Card/WLAN B - 37 B.Schematic Diagrams Mini Card/WLAN H C 1_3 . 3V Z36 10 USB_PN1 1 1 4 R 544 0_06 C7 1 5 * 10 u _1 0 V _0 8 Z36 06 HC 1 _ 1 . 5 V S I C H _ S M B C LK 1 1 5, 21 , 23 Z36 13 Z36 05 VDD 5 32 , 3 3 , 34 Z36 09 R 569 * 0_ 06 R 547 * 0_0 4 R 550 * 10m il _ shor t C7 4 8 * 10u _10 V_08 C7 3 9 .
Schematic Diagrams B - 38 MXM PCI-E Type III B.Schematic Diagrams MXM PCI-E Type III EX _ L VD S_ L 0 N 1 2 PE G_ RXN4 C4 6 7 . 1u_ 16 V _ 04 Q2 3 2N 7 0 02 G D S EX _ D AC_ R 2 8 EX _ L VD S_ UCL K P.
Schematic Diagrams Board to Board CON/TPM B - 39 B.Schematic Diagrams Board to Board CON/TPM U S B_ PP 8 14 W EB1 # 22 SPKO UTL + 2 6 3. 3V R 693 * 33_0 4 Z38 09 TPM _ BAD D 3.
Schematic Diagrams B - 40 Button Board B.Schematic Diagrams Button Board Sheet 39 of 42 Button Board BJ SPK1 88 26 6- 040 0 1 2 3 4 1 2 3 4 BD G N D B+ 5 VS BW EB# 1 POWE R BUTT ON LED BD G ND Z3 9 01 BC 4 * .
Schematic Diagrams Click Board B - 41 B.Schematic Diagrams Click Board TG N D TG _FET TC S4 B TC 1 5 4 7 P_ 5 0 V_ 0 4 TG N D TC 3 1u_1 0V_0 6 TH 4 C2 3 6 D 8 7 TTC _VD D Z40 14 1 TM O S I TR 23 100 K_04 TC 19 * . 1 u_16 V _04 TG N D BO TTON VI EW TG N D GT P _ L T+ 5VS TNR ESET TH 5 C6 3 D6 3 TR 22 27.
Schematic Diagrams B - 42 Finger Printer Board B.Schematic Diagrams Finger Printer Board FD A TA 1 TO P V I E W FD A T A 0 2 FG N D FD VD D 1 FN RES E T FM I S O /M O D E 3 FGN D 1 FX O U T F GRID0 / .
Schematic Diagrams SIM Card Board B - 43 B.Schematic Diagrams SIM Card Board MU I M_C L K MJ _ S I MB 1 88 09-1 001 1 3 5 7 9 2 4 6 8 10 MC 5 . 1u_16 V _0 4 MU I M_R ST MGN D MU I M_VP P MU I M_D ATA .
Schematic Diagrams B - 44 B.Schematic Diagrams.
デバイスClevo M860TUの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Clevo M860TUをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはClevo M860TUの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Clevo M860TUの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Clevo M860TUで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Clevo M860TUを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はClevo M860TUの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Clevo M860TUに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちClevo M860TUデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。