Cliffordメーカー770の使用説明書/サービス説明書
ページ先へ移動 of 47
Intelliguar d 770 O O w w n n e e r r ’ ’ s s G G u u i i d d e e.
i © 2006 directed electr onics limited lifetime consumer warranty Directed Electr onics ("Directed") pr omises to the original purchaser to r epair or replace with a comparable reconditione.
ii OPPORTUNITY AND THE LIKE. NOTWITHST ANDING THE ABOVE, THE MANUF ACTURER DOES OFFER A LIMITED W ARRANTY TO REPLACE OR REP AIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages.
1 © 2006 directed electr onics limited lifetime consumer warran- ty . . . . . . . . . . . . . . . . . . . . . . . . . . .i trademarks and copyrights . . . . .ii what is included . . . . . . . . . . . . . .2 important information . . . . . . . . .2 system maintenance .
what is included z Intelliguar d control module and harness z T wo five-button r emotes z Pr esentation envelope and quick refer ence card z T wo window decals z Exter nal antenna/r eceiver with har n.
3 © 2006 directed electr onics system maintenance The system r equires no specific maintenance. Y our r emote is powered by a pair of miniatur e 3V lithium batteries that will last approximately one year under normal use.
4 r eplacement r emote contr ols Y ou can purchase r eplacement remote contr ols from your Authorized Dealer or on-line at the following web site: www .directedstor e.com Once you r eceive your new remote contr ol, please refer to instruc- tions included on the r emote packaging.
5 © 2006 directed electr onics r emote configurations 1. LED Indicator 2. Arm/Disarm Button 3. Remote Start Button 4. T runk Release Button 5. Silent Arm/Disarm Button 6.
6 r emote functions This system uses computer -based code lear ning to lear n the remote buttons. This makes it possible to assign any r emote button to any sys- tem function. The r emote initially comes programmed with standar d configuration, but may also be customized using the Clif fNet W izard PC pr ogram.
7 © 2006 directed electr onics Button, then Button Accessory C output is contr olled by these buttons. Button twice, then Button These buttons active r emote V alet ® . Button twice, then Button These buttons disable the sensors. Button thr ee times, then Button These buttons adjust the dual-zone radar sensor .
8 using your system The buttons used in the instructions in this manual corr espond to the standar d remote configuration. If your r emote has been custom con- figur ed, the icons on your remote buttons may not corr espond to the indicated functions. arming Y ou can activate, or arm, the system by pressing on your r emote for one second.
9 © 2006 directed electr onics and pr ogrammed for passive locking) at 30 seconds, but the siren will not chirp. The early chirps pr ovide you with a 25-second war ning prior to arming. When armed, your vehicle is pr otected as follows: z The LED will flash as a visible theft deterr ent.
© 2004 directed electr onics, inc. disarming without a r emote This featur e allows you to disarm the system without the remote should it be lost, damaged, or disabled. In or der to disarm without a remote, you must have the vehicle’ s ignition key , know where the PlainView 2 V alet ® button is located, and have the PIN code.
11 © 2006 directed electr onics r emote sensor disable T o temporarily disable a sensor input, arm the system, pr ess twice and then . The lights will flash four times and all war n away trigger zones one, two, thr ee, and eight are bypassed.
12 auxiliary channel bypass Alarm sensor input zones one, two, thr ee, and eight will be bypassed while a pulsed or timed auxiliary Output is active. panic mode with smart door locking If you ar e threatened in or near your vehicle, you can attract attention by triggering the system with your r emote! Just press for two seconds to enter Panic Mode.
13 © 2006 directed electr onics 1. T ur n the ignition on. 2. Enter PIN code (factory setting is 2). 3. After the last digit of the pin code is enter ed: a. T o disarm the system: pr ess and release . b. T o enter valet ® mode: Press and hold for thr ee seconds.
14 one-time auto-arming bypass This will bypass the auto arm featur e once only . 1. W ith the key , tur n the ignition on, then off within two seconds.
15 © 2006 directed electr onics the ignition is tur ned on. For mor e information, please refer to the T able of Zones section of this guide. false alarm contr ol technology (F ACT II) Y our system o.
16 select sir en sounds T o customize sir en sounds, please refer to the selectable sir en sounds fea- tur e in the User Selectable Features grid. Once in pr ogramming mode, pr ess on the r emote to begin playback of the available sounds.
17 © 2006 directed electr onics interior light exit delay , and you arm the system before the interior light goes out, you may hear Bypass Notification chirps. Once the light shuts of f, however , the doors are monitor ed normally . disarming diagnostics Extra disarm chirps ar e the T amper Alert.
18 table of zones The zone number is the number of LED flashes used by the system to identify a specific input. The standar d input assignments are listed below , along with spaces to write in any optional sensors or switches you have had installed. If the W ar ning Zone response is trigger ed, the LED will not r eport it.
19 © 2006 directed electr onics high fr equency Y our system transmits and receives at 433 MHz. This pr ovides a cleaner spectrum with less interfer ence and a more stable signal. smart power up II This security system will stor e its current state to non-volatile memory .
20 z Power Saver when the system is armed: After the system has been armed for 48 hours, the LED will flash at half its nor- mal rate, decr easing the system's current draw . z Power Saver in V alet ® Mode: When the system enters V alet ® Mode the LED illuminates steadily .
21 © 2006 directed electr onics allows the vehicle's doors to lock when the security system passively arms (after the 30 second countdown). This featur e only works if passive arming has been pr ogrammed. z Panic mode enabled /disabled: Some states have laws against sir en capability while driving.
22 clif fnet wizard installation softwar e programming Clif fnet W izard pr ovides access to all available system features and some that ar e not available when manually programming with the V alet ® button.
23 © 2006 directed electr onics 5. Featur e select - Press the same number of times as the desir ed feature. The sir en will chirp with each press. The fea- tur e can now be changed using the remote contr ol. 6. Featur e change - Press on the r emote.
24 user selectable featur es The factory default settings ar e shown in bold . * This feature is only available with optional IntelliStart connected. ** This feature is only available with optional SmartWindows connected.
25 © 2006 directed electr onics user selectable featur es descriptions - column one add new r emote (auto lear n) Auto-lear n new five-button r emote controls to the system in the stan- dar d button configuration. Once you have entered the featur e, press on the r emote until you hear a confirmation chirp.
26 auto unlock - of f/ignition z Of f: The doors will not automatically unlock when the igni- tion is tur ned of f. z Ignition: The doors will automatically unlock as soon as the ignition is tur ned of f. auto (passive) arm and lock - of f/on z Of f: The doors will not lock when the system passively arms.
27 © 2006 directed electr onics user selectable featur es descriptions - column two set pin code This featur e allows the setting of the user's personal PIN code.
28 r eset to default settings All system settings (except PIN and r emote programming) in the User Pr ogramming grid will be reset to their default factory setting as indi- cated in bold lettering. z Pr ess the arm/disarm button of the TX; the siren will chirp twice as confirmation.
29 © 2006 directed electr onics user selectable featur es descriptions - column three The featur es in this column pertain to programming individual r emote chan- nels in custom configurations. Following is an explanation of the featur es. arm/disarm only The r emote control channel pr ogrammed into this feature will arm/dis- arm the system only .
30 r emote start z This featur e is only available with IntelliStart connected. z The r emote channel programmed into this featur e will acti- vate or shut down the Intellistart r emote start system. window contr ol z This featur e is only available with SmartW indows connected.
31 © 2006 directed electr onics pin pr ogramming A PIN code can have one to four digits; each digit can be from 0-9. Pr ogramming Procedur e 1. Enter the featur e location in the installer programming grid. 2 . Immediately pr ess and release of the PlainView 2 V alet button.
32 PIN Code Confirmation Pr ocedure Begin this pr ocedure within 15 seconds of finishing the pr ogramming sequence or the new code will not be set. 1. T ur n on the ignition. 2. Enter the new PIN code. 3. Pr ess and hold for thr ee seconds. z LED tur ns on: New PIN code is lear ned and pr ogram- ming is complete.
33 © 2006 directed electr onics Disarming auto-immobilization T o disarm auto-immobilization when active, follow any of the sequences listed below . z T ur n ignition on and press the arm/disarm button. z Arm the alarm and then disarm the alarm. z T ur n the ignition on and enter the system valet ® /PIN code.
34 the engine, stranding the thief and vehicle. At this time your r emote will not operate the system, only you can tur n of f the BlackJax by enter- ing your secr et PIN through the PlainView 2 valet button.
35 © 2006 directed electr onics 5. If PIN code is NOT enter ed within 20 seconds: z System sounds sir en and begins flashing parking lights. z Brake lights continue to flash.
36 Bypass BlackJax temporarily 1. T ur n ignition on. 2. Enter PIN code. Do not enter valet or pr ogramming mode. 3. W ithin 10 seconds press . 4. Sir en chirps 1 time as confirmation of BlackJax bypassed. 5. T ur n Ignition Off, sir en chirps 3 times as confirmation of exiting pr ogramming.
37 © 2006 directed electr onics audio sensor The 506T Audio Sensor is a low-curr ent device that provides an added level of pr otection to an existing security system by detecting sounds that have the acoustic signatur e of breaking glass or metal-to-glass impacts.
38 4. Adjust Primary zone z Pr ess of the remote contr ol. z Sir en chirps 2 times. z Sensor adjustment mode is enter ed. z Hit vehicle at the desir ed level of impact. z Sensor adjusts itself to the for ce of Hit. z Sir en chirps 1 time as confirmation of adjustment.
39 © 2006 directed electr onics z Primary zone can now be r e-adjusted as described in step 4. z Or pr ess again to exit programming mode. z The sir en will chirp 3 times when sensor adjustment mode has been exited. glossary of terms Contr ol Unit: The "brain" of your system.
40 Omnisensor : A dual-zone lear ning impact sensor . PlainView 2 V alet Button : A small two-button switch mounted some- wher e inside the vehicle. It is used to override the alarm when a remote is lost or damaged, or to enter or exit V alet mode. Siren : Noise generating device usually installed in the engine compart- ment of the vehicle.
41 © 2006 directed electr onics security & convenience expansions Her e we have listed only some of the many expansion options available. Please contact your dealer for a complete list of all the options available to you.
42 health check Dir ected Electronics r ecommends you return to your installing Cliffor d dealer to have your system checked for corr ect operation. The first check is due one year after the installation date and at yearly intervals ther eafter . n n o o t t e e : : There may be a small charge incurred for this ser vice.
43 © 2006 directed electr onics.
Vista, CA 92081 www .directed.com © 2006 Directed Electr onics - All rights reserved G919621 11-06 The company behind this system is Directed Electronics Since its inception, Directed ® has had one purpose, to pr ovide consumers with the finest vehi- cle security and car stereo pr oducts and accessories available.
デバイスClifford 770の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Clifford 770をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはClifford 770の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Clifford 770の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Clifford 770で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Clifford 770を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はClifford 770の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Clifford 770に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちClifford 770デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。