Clover ElectronicsメーカーZ670の使用説明書/サービス説明書
ページ先へ移動 of 11
INSTRUCTION MANUAL 30X DAY/NIGHT ZOOM CAMERA MODEL Z670 Copyright © 2009 Clover Electronics U.S. A. All Rights Reserved.
▪ To prevent fire or shock hazard, do not expose th e camera to rain or moisture. ▪ To avoid electrical shock, do not open the case of this product. ▪ Operate this product with the syst em such as COM22168, LCD2088, TFT2284C, TFT2288C and LCD261616 or by using onl y the power supply included.
1. Video Output/DC power Input (6 pin Din) This is a 6pin Din connector for outputti ng video signals and fo r DC 12V input from the system such as COM22168, LCD2088, TFT2284C, TFT2288C and LCD261616. 2. Video Output (BNC) This is a BNC connector fo r outputting video signals.
▪ LANGUAGE Choose “LANG (LANGUAGE)” in the Menu shown in Fig.4-1 by pressing “TELE”/”WIDE” button and select “EN (English)” by pressing “NEAR”/”FAR” button.
▪ WHITE BALANCE (WB) Choose “WB (WHITE BALANCE)” in th e Menu shown in Fig.4-2 by pressing “TELE”/”WIDE” button and choose one among AUTO, OUT DOOR, INDOOR and LAMP by pressing “NEAR”/”FAR” button. ▪ IRIS Choose “IRIS” in the Menu shown in Fig.
▪ Click the “PAN/TILT (PELCO D)” button on th e channel you wish to install the zoom camera and then the PAN/TILT Menu will be displayed as shown in Fig.4-5. ▪ Settings in the PAN/TILT Menu (Refer to System manual section 7-4.5 on page 90 for more detail) - Click the PTZ ID button in the PAN/TILT Menu shown in Fig.
- Click the “PAN/TILT & REMOTE” bu tton in the PAN/TILT menu shown in Fig.4-5, then the vendor lists will show up. Select “PELCO” on the vendor lists by clicking the mouse and then the pr otocol “PELCO D” will display.
▪ Connect the one end of 60’ 6pin Din cable to the Din jack on the rear of the zoom camera and the other end of cable to the DI N jack that the settings for PAN/TILT menu on the DVR system has been completed. -Be sure that the two arrow s on the camera and the cable should be aimed at each other.
▪ Click the Channel button in Fig. 6-2 and sele ct the Channel number of zoom camera on the pop-up screen. ▪ Click and hold the “+” or “-“ button for Zoom In/Out until getting the best quality of objects. If the Focus is set to “AUTO” on th e zoom camera, it won’t be adjusted by the “+” or “-“button.
Image pickup device SONY Color CCD TV system NTSC Resolution 480 TV lines Minimum illum ination 0.5 Lux Video output 1.0v p-p composite @75 ohms S/N ratio More than 48db Gamma characteristics 0.45 Electronic Shutter Speed 1/60 to 1/100,000sec Zoom Up to 30X Max.
HS13HB Outdoor camera housing w/heater and blower MBK010 Mounting bracket for HS13HB ADT241200 AC 24V 1.2A AC power supply for HS13HB This warranty gives the original purchaser sp ecific legal rights and you may also have other rights, which may vary from state to state.
デバイスClover Electronics Z670の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Clover Electronics Z670をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはClover Electronics Z670の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Clover Electronics Z670の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Clover Electronics Z670で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Clover Electronics Z670を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はClover Electronics Z670の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Clover Electronics Z670に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちClover Electronics Z670デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。