CNETメーカーCNIG904Sの使用説明書/サービス説明書
ページ先へ移動 of 54
Broadband Router Shared Broadband Internet Access User’s Guide.
i T ABLE OF C ONTEN TS CHAPTER 1 IN TRODUCTION .............................................................................................. 1 Broadband Router Features .................................................................................
ii APPENDIX A TROUBL ESHOOTI NG ................................................................................. 49 Overview ....................................................................................................................... .... 49 General Problem s.
1 Chapter 1 Chapter 1 Chapter 1 Chapter 1 Introduction Introduction Introduction Introduction This C hapter provides an overview of the Broadband Router 's featur es and capabilities. Congra tulatio ns on the purc hase o f your new Bro adb and Ro uter .
CNet Technology Inc Broadband Router User Guide 2 Internet A ccess Features • Shared Internet Access. All users on the LA N can access the Internet through the Broadband Router, us ing on ly a sing le external IP A ddress. The local (inv alid) IP Ad- dresses are h idden from external sources.
CNet Technology Inc I n t rodu c t i on 3 NA T Fire wall Protection The firewall protection provided by the Broadband Router is an intrinsic side effect of NAT (Netw ork Addres s Translation). A ll users on the LA N share a sing le external IP address.
CNet Technology Inc 4 Phy sical Details Please take a few min utes to fam iliarize you rself w ith the Broadband Router. Top - Mounted LEDs There are 2 LEDs on th e top of the u nit. The "DATA STATUS LAN" LED h as 2 colors - Green and Orang e.
CNet Technology Inc I n t rodu c t i on 5 WAN port (10BaseT) Connect the A DSL or C able Modem here. If you r m odem cam e w ith a cable, use th e supplied cable. Oth erw ise, use a s tandard LA N cable. WAN Port LED Flashing - data is being transm itted or received via the WAN port.
6 Chapter 2 Chapter 2 Chapter 2 Chapter 2 Installation Installation Installation Installation This C hapter covers the physical i nstall ation of the Broadband Rout er. Requirements • Ethern et LA N (10/100BaseT) and the TCP/IP protocol . • For Internet A ccess, a DSL or Cable m odem , and an In ternet Acces s accoun t w ith an ISP.
CNet Technology Inc I n s t a ll a ti o n 7 3. Connect AD SL or Cable Modem Conn ect the A DSL or Cable m odem to the WA N port on t he Broadband R outer. Use t he cable supplied w ith your m odem. If no cable w as supplied, use a st andard LA N cable.
8 Chapter 3 Chapter 3 Chapter 3 Chapter 3 Configuration Configuration Configuration Configuration This C hapter provi des details of the configur ation proces s. Overv iew This chapter describes th e procedure for: • LAN setup • WAN port conf iguration for Internet A ccess PCs on your local LA N may also require configu ration.
CNet Technology Inc Con f i gura t i on 9 Configurati on Program The Broadband Router contain s a HTTP server. This en ables y ou to connect to it, an d config - ure it , using your W eb Bro wser. Most Brow sers shou ld w ork, provi ded they support HTML tables an d form s.
CNet Technology Inc B roadband Rou t er U s er Gu i de 10 If you can't connect If th e Broadband Rout er does not res pond, check the f ollow ing : • The Broad band Router is prop erly installed, LA N connection is OK, and it is pow ered ON. • Ensu re that y our PC and the Broadband R outer are on th e sam e netw ork segm ent.
CNet Technology Inc Con f i gura t i on 11 LA N Screen The LAN screen, lik e the exam ple below, w ill be displayed w hen y o u first connect. Figure 5: LAN Screen LA N Configuration. For most users, the def ault values for these f ields should be satisfactory, and no chan ges w ill be required.
CNet Technology Inc B roadband Rou t er U s er Gu i de 12 DHCP Server Operation If Enabled, the Broadband Router will allocate IP Addresses to PCs on you r LAN. The def ault and recom mended value is Enabled. If y ou are already using a DHCP Server, this s etting m ust be DISABLED, an d the existin g DHCP serv er mu st be re-con figu red.
CNet Technology Inc Con f i gura t i on 13 WA N Confi gurati on To configure the WA N port: • Select WAN from the menu. • Select the appropriate connection type ( Direct Connection or PPPoE ) on th e screen below , then Click th e “Config ure” button.
CNet Technology Inc B roadband Rou t er U s er Gu i de 14 Hardware (MAC) Address Also called Networ k Adapter Addr ess or Physic al Address . Provide this value to y our ISP if requested. If you did not provide this value w hen first con nected, there is n o need to provide it n ow.
CNet Technology Inc Con f i gura t i on 15 WA N - PPPoE If y ou selected PPPoE on the WAN screen, the display w ill b e like the follow ing ex ample. Figure 8: WAN Port - PPPoE Data – WAN (PPPoE) A ccount Account/User Nam e The nam e of the In ternet accoun t provided by your ISP.
CNet Technology Inc B roadband Rou t er U s er Gu i de 16 WA N Status Clicking WAN Status on the men u bar will tak e you to the WAN Status screen. The screen show n w ill depend on wh ether y ou are using a Direct Connection or PPPoE .
CNet Technology Inc Con f i gura t i on 17 WA N Status – PPPoE Figure 10: WAN Status – PPPoE Status Data WA N Status Physical A ddress The "Hardw are" address of th is device, as seen by other devices on th e WAN . IP Address The IP Address of this devi ce, as seen by devices on the WA N.
CNet Technology Inc B roadband Rou t er U s er Gu i de 18 Connection Log Messages Messag e Description Connect on Deman d Connection attem pt has been triggered by th e "Connect on De- mand" se tting. Manual connection Connection attem pt started by the "Connect" button.
CNet Technology Inc Con f i gura t i on 19 LA N/Device Status The LAN Status link on the men u w ill result in a screen like the exam ple below. Figure 11: Status Screen Data – LA N/Device Status Device Firm ware Version Version of the f irm w are (em bedded softw are, including this program ) wh ich is currently installed.
CNet Technology Inc B roadband Rou t er U s er Gu i de 20 Status P ossible Status v alues are "Leased" (the IP A ddress is allocated to the device sh ow n) or "Reserv ed" (the IP A ddress is not av ailable). No t e : The DHCP table will be empty unless th e DHCP Server function is being used.
21 Chapter 4 Chapter 4 Chapter 4 Chapter 4 PC Configur PC Configur PC Configur PC Configur a a a at i o n tion tion tion This C hapter detai ls the PC Configur ation re quired on the l ocal ("Internal ") LAN.
CNet Technology Inc B roadband Rou t er U s er Gu i de 22 Figure 13: IP Ad dress (W in 95) Ensure y our T CP/IP settings are correct, as follow s: Using DHCP To use DHCP, select the radio button Obtain an IP Addr ess autom aticall y . This is the default Windo ws settings.
CNet Technology Inc P C Con f i gura t i on 23 • On the DN S Confi gurati on tab, ensure Enable DN S is selected. If th e DNS Server Search Order list is empty, en ter the DNS address provided b y y our ISP in the fields beside the Add button, then click Add .
CNet Technology Inc B roadband Rou t er U s er Gu i de 24 Internet A ccess Configuration If y ou are us ing th e Broadband Router for In ternet access: • Ensure that th e DSL m odem, Cable m odem, or other perman ent connection is f unctional.
CNet Technology Inc P C Con f i gura t i on 25 Maci ntosh Configurati on You can access the Intern et via the Broadband R outer. The procedure is as f ollow s. 1. Open the TCP/IP Control Pa nel. 2. Select Ethernet from the Connect via pop-u p me nu. 3.
26 Chapter 5 Chapter 5 Chapter 5 Chapter 5 DHCP DHCP DHCP DHCP This Chapt er covers t he use of DHC P, using either an existing D HCP Server or the Broadband Router 's DHC P Server funct ion. Overv iew If your LAN d oes no t use D HCP, and you do no t wish to use D HCP , you ca n ignor e this chapter.
CNet Technology Inc DHCP 27 To Configure y our PCs to use DHCP This is the default setting f or TCP/IP under Windows 95/98/ME. In Windows, th e DHCP Client setting is called "Obtain an IP Address Automatically ". See Chapter 4 – PC Confi guration f or the procedure to check these settin gs.
28 Chapter 6 Chapter 6 Chapter 6 Chapter 6 R outing R outing R outing R outing This C hapter explains the Routing fe atures of the Broadband Router. Overv iew While the Broadband Router in cludes a stan dard (static) routing table, this f eature can be compl etel y ignore d if you d o no t have a ro uter in your LAN.
CNet Technology Inc Rou t i ng 29 Routing Table Data An en try in the routin g table is required f or each LA N segment on your Netw ork, other than th e segm ent to wh ich this device is attached. The data in the Routing Table is as follows. Destination IP Address The netw ork address of the rem o te LAN s egm ent.
CNet Technology Inc B roadband Rou t er U s er Gu i de 30 Router Configur ation It is essential that all IP packets for devices not on the local LA N be passed to the Bro adband Router, so that th ey can be forw arded to the external LA N, WAN, or Intern et.
CNet Technology Inc Rou t i ng 31 For the Broadband Router's Routing Table The Broadband Router requires 2 entries as f ollow s. Entry 1 (Segment 1) Desti nation IP Addres s 192.168.1.0 Netw ork Mask 255.255.255.0 (Stan dard Class C) Gatew ay IP Addres s 192.
32 Chapter 7 Chapter 7 Chapter 7 Chapter 7 Device Options Device Options Device Options Device Options This C hapter detail s the options available on t he Broadband Router's "Op- tions" scr een. Overv iew An ex am ple Options screen is show n below.
CNet Technology Inc Op t i ons 33 NA T (Netw ork A ddress Translation) NAT allow s PCs on y our LAN to sh are a sing le external (In ternet) IP Addres s. This IP Address is supplied by y our ISP. Use the followin g to determine w hether or nor you need NA T.
34 Chapter 8 Chapter 8 Chapter 8 Chapter 8 Advanced Inte Advanced Inte Advanced Inte Advanced Inte r r r rne t net net net This Chapt er explains how to use the "Advanced Internet " features.
CNet Technology Inc A dvan c ed I n t ernet 35 Special Internet A pplications This feature is only required if y ou w ish to use In ternet applications w hich require 2-w ay comm unication , multiple conn ections, or combined TCP/UDP connections.
CNet Technology Inc B roadband Rou t er U s er Gu i de 36 • To Enable a defined Applica tion - Sel ect it f rom t he drop-dow n list - Click "Get Data" - Check the Enable ch eckbox - Click "Update" • To Disable a defined Applica tion - As above, but u ncheck the Enable ch eckbox .
CNet Technology Inc A dvan c ed I n t ernet 37 Virtual Servers This feature allow s you to m ake Serv ers on y our LA N accessible to In ternet us ers. Norm ally, Internet u sers w ould not be able to access a server on y our LA N because: • Your Se rver doe s not have a vali d exte rnal I P Add ress.
CNet Technology Inc B roadband Rou t er U s er Gu i de 38 Virtual Server Configuration The Virtual Servers screen is reached by the Advanced Internet - Virt ual Servers link.
CNet Technology Inc A dvan c ed I n t ernet 39 User Defined Virtual Servers If the ty pe of Server y ou w ish to use is n ot listed on the Vir tual Server s screen, y ou can define it using th is feature. Select Advanced Internet - User Defined Virtual Ser vers to see a s creen like the ex am ple below .
CNet Technology Inc B roadband Rou t er U s er Gu i de 40 Data WAN IP Address • This show s the IP Address w hich Internet us ers m ust u se to conn ect to an y o f yo ur V i r tu al S er v e rs . • To Internet Users, A LL y our Virtual Servers hav e the sam e IP Ad- dress.
CNet Technology Inc A dvan c ed I n t ernet 41 DMZ This feature, if enabled, allow s one (1) computer on y our LA N to be exposed to all u sers on th e Internet, allow ing unrestricted 2-w ay com munication betw een the "DMZ" PC and other Internet users or Serv ers.
CNet Technology Inc B roadband Rou t er U s er Gu i de 42 Data Enable Enable DM Z Feature Use this to En able or Disable the DMZ f eature. The DMZ featu re shou ld be disabl ed w hen n ot required. LA N IP Addr ess LAN IP Address Enter the IP Address of the PC on y our LAN w hich w ill b ecome the "DMZ " PC.
43 Chapter 9 Chapter 9 Chapter 9 Chapter 9 Access Control Access Control Access Control Access Control This C hapter explains how to configur e and use the Br oadband Router's "Ac- cess Cont rol" featur e. Overv iew The Access C ontrol featu re allow s adm inistrators to restrict Intern et Access by in dividu al PCs.
CNet Technology Inc B roadband Rou t er U s er Gu i de 44 Security Groups The Security Groups screen is reached from the Ac cess Con trol l ink on the navigat ion b ar.
CNet Technology Inc Acc e ss C on t r o l 45 Data The following data is required. A ccess Rights: Int ernet Access for this Group No restrictions No packets are blocked. Us e this to create an "Unlim ited Access" group, or to temporarily rem ove restrictions.
CNet Technology Inc B roadband Rou t er U s er Gu i de 46 PCs The PCs screen is reach ed from the Ac cess Con trol l ink on the naviga tion b ar . An example screen is sho wn below. Figure 26: PCs Screen Note that the drop-down box lists all PCs previously entered.
CNet Technology Inc Acc e ss C on t r o l 47 Data PC Nam e Enter a nam e to identify this PC. Network Adapter Address Hardw are address for th is PC. You can u se the Win dow s "Winipcfg" program or y our LA N manag em ent prog ram to fin d this address.
CNet Technology Inc B roadband Rou t er U s er Gu i de 48 Data TCP Packets Define the packets y ou wish to be filtered out, by en tering the f ollowin g data. TCP Filters Name En ter a descriptive nam e for this entry . Port No. Enter an integ er representing th e Port Number for this ty pe o f packet.
49 Appendix A Appendix A Appendix A Appendix A T roubleshooting T roubleshooting T roubleshooting T roubleshooting This Appendix cover s the most l ikely problem s and their s olutions. Overv iew This chapter covers s ome com mon problem s that m ay be encoun tered w hile us ing th e Bro adb and Router and so me possib le so lutions t o them.
CNet Technology Inc Broadband Rou t er U s er Gu i de 50 Internet A ccess Problem 1: When I enter an URL or IP address I get a tim e out error. Solution 1: A num b er of things c ould be causing thi s. T ry the fo llo wing troub lesho ot- ing steps. • Check if other PCs w ork.
51 Appendix B Appendix B Appendix B Appendix B Specific Specific Specific Specifica a a at i o n s tions tions tions Broadband Router Model Broadband Rout er Dimensions 2 0 4 mm( L) * 1 2 7 mm( W ) * .
デバイスCNET CNIG904Sの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
CNET CNIG904Sをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCNET CNIG904Sの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。CNET CNIG904Sの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。CNET CNIG904Sで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
CNET CNIG904Sを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCNET CNIG904Sの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、CNET CNIG904Sに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCNET CNIG904Sデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。