3Mメーカー1420-iDの使用説明書/サービス説明書
ページ先へ移動 of 28
3M ™ Dynatel ™ Electronic Marking System Marker Locator 1420-iD Operator’ s Manual 1420-iD Marker Locator 1420E-iD Marker Locator Mar ch 2014 78-8130-6741-6 Rev G 3.
2 78-8130-6741-6 Rev G Contents 1. Safety Information ............................................................................................ 4 A. Intended Use ......................................................................................
78-8130-6741-6 Rev G 3 Congratulations! Y ou have just purchased one of the finest, most advanced Electronic Marker locating devices available today! The 3M ™ Dynatel ™ Marker Locators 1420-iD and.
4 78-8130-6741-6 Rev G 1 . Safety Information Please read, understand and follow all safety information contained in these instructions prior to the use of the 3M 1420-iD and 1420E-iD Marker Locator . Retain these instructions for future reference. A.
78-8130-6741-6 Rev G 5 2 . Quick Start A. Locator Battery Installation 1. T wist cap to open battery compartment. 2. Slide battery compartment out of handle. ! Caution T o reduce the risks associated with fire and explosion: • Do not short, excessively hea t, or dispose of ba tteries in fire.
6 78-8130-6741-6 Rev G D. 1420-iD Locator Keypad and Display Definitions 6 5 3 2 1 7 9 4 2A 11 8 10 12 [1] On/Off (Power): T urns unit on and off. [2] Speaker V olume Control: [2] Adjusts the volume of the locator (off, low , medium, and high). [2A] Speaker V olume Icon : Indicates the relative volume level of the locator .
78-8130-6741-6 Rev G 7 3 . Menu Displays A. Main Menu When the Menu [6] button is pressed, the Main Menu display appears. The function appears on the display above each soft key . 1. Write Mode: System used to write information to iD Markers 2. Data/T emplate: Displays marker history and template creation/selection displays: a.
8 78-8130-6741-6 Rev G 5. <<Back: Returns to previous menu display 6. Setup: Displays second and third level displays for locator configuration a. Depth Units – Choose unit of measure; in, ft-in, or cm b. Clock – Date and time stamped on marker information and depth readings.
78-8130-6741-6 Rev G 9 4 . Locating 3M ™ Electronic Markers and 3M ™ iD Markers A. E-Model Initial Configuration (Applies only to 1420E model.) Attention: All E-Model (Export) iD Locators must run the initial configuration setup found in the 3M ™ Dynatel ™ Locator PC T ools software.
10 78-8130-6741-6 Rev G Step 1 1. The prompt line will display: Download Completed Successfully , when finished. The marker types legally allowed in the country selected in Step 6 above will be activated at this time.
78-8130-6741-6 Rev G 11 E. Dual Marker Locate Step 1. Press Locate/OK [5]. Step 2. Press Marker [SK]. Step 3. Press MARKR 1 [SK T oggle] to select desired Utility . Step 4. Press MARKR 2 [SK T oggle] to select desired Utility . Note: Only the marker types enabled in the setup menu will be shown.
12 78-8130-6741-6 Rev G Step 3. T o save the depth reading, press Mem Select [SK]. − Five depth readings can be saved with the time, date, and its identification number . − Save [SK] will place each entry in sequential order in memory (M1 - M5) until five readings have been stored.
78-8130-6741-6 Rev G 13 Step 5. Optional: Press Clear All [SK] to delete all stored depth information. Step 6. Press Mem Select [SK] to select a specific memory location to store the depth readings. When the preferred location appears on the display , press Save [SK].
14 78-8130-6741-6 Rev G Step 7. Move the boxed cursor by pressing the left/ right arrows [SK] or up/down arrow [SK] to move the cursor up or down. Step 8. Press Select [SK] to enter the alphanumeric character . − Entry will appear at the top of the screen.
78-8130-6741-6 Rev G 15 Step 14. Populate as many fields as possible from the drop-down list of common (compressed) terms available to conserve marker memory space, or choose UserEdit if a term is not found to meet the user's requirements. Select term by pressing the up/down arrows [SK] and press Locate/OK [5].
16 78-8130-6741-6 Rev G Save New: Creates a new template containing all information. Original template remains unchanged. Display will return to the template name field. Modify the name of the template and press Locate/OK [5] to save. Cancel: Clears all modifications made to any unsaved template.
78-8130-6741-6 Rev G 17 Step 3. Press Menu/OK − The selected template will be displayed. − The arrow on the right side of the display indicates there is more information than can be displayed on the screen (scroll down by pressing the down arrow [SK]).
18 78-8130-6741-6 Rev G − Message 2. When writing to a passive marker or the wrong frequency then the following will be displayed. − Message 3. This screen indicates that X-T ype marker option was incorrectly set to "Y es" or "No".
78-8130-6741-6 Rev G 19 − [SK2] X-T ype: Choose ‘Y es’ if writing to a Gen 2 marker and ‘No’ if writing to a Gen 1 marker . Gen 2 markers will have an “X” following the serial number that is printed on the attached tag. − [SK3] Marker: Select type of marker to be written by repeatedly pressing Marker [SK T oggle].
20 78-8130-6741-6 Rev G Step 8. If User Edit is selected, the following screen will appear . Step 9. Move the boxed cursor to the ‘back arrow’ and press Select [SK] to delete the entry to be modified. Step 10. Move the boxed cursor by pressing the left/ right arrows [SK] or the Up/ Down Arrow [SK] to move the cursor to the next row .
78-8130-6741-6 Rev G 21 7 . Reading iD Markers The operator can retrieve the data from the iD marker by pressing Read [SK] on the Marker Locate screen.
22 78-8130-6741-6 Rev G B. Write History [SK] Menu [6] + Data T emplat [SK:2] + Write History [SK:2b] • Select the marker data to be viewed by pressing the up/down arrows [SK]. • Press W rite Details [SK] to view all data that was sent to the marker .
78-8130-6741-6 Rev G 23 When the locator is communicating with a GPS device, the LA T and LONG coordinates received from the device will appear on the marker locate display .
24 78-8130-6741-6 Rev G T ools. Selecting this link will display the latest software downloads as well as any Release Notes related to the current software release. Once downloaded to your PC, double click the file and an auto-installer will install the C T ool desktop software.
78-8130-6741-6 Rev G 25 13. Locator Specifications: 1420-iD Item Specification Frequencies / Markers T elephone, Power , Gas, W ater , W aste Water , Communication (CA TV), General Purpose Maximum Wr.
26 78-8130-6741-6 Rev G 15. Locator Specifications: 1420E-iD Item Specification Frequencies / Markers T elephone, Power , Gas, W ater , W aste Water , Communication (CA TV), General Purpose Maximum W.
78-8130-6741-6 Rev G 27.
3 Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 1-800-200-0265 F AX: 1-877-601-1305 www .3M.com/dynatel Please Recyc le. Printed in USA. © 3M 2014. All Rights Reser ved. 78-8130-6741-6-G This product is in accordance with the requirements of the European directive 99/5/EC.
デバイス3M 1420-iDの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
3M 1420-iDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこには3M 1420-iDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。3M 1420-iDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。3M 1420-iDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
3M 1420-iDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又は3M 1420-iDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、3M 1420-iDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわち3M 1420-iDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。