CompaqメーカーP/N DOC-FB4Bの使用説明書/サービス説明書
ページ先へ移動 of 29
ImageReader Express Compact Color Flatbed Scanner User’s Guide P/N DOC-FB4B 799250.
i I n f o 580 Division Street Campbell CA, 95008 Phone (408) 538-2500 • Fax (408) 538-2599 Copyright © 1996 – 1997 All rights reserved. No portion of this document may be reproduced without prior written authorization.
i i Table of Contents Chapter 1 Introduction ..................................... 1 - 1 Welcome ........................................ 1 - 1 Using this manual ............................ 1 - 1 Assistance ................................. 1 - 1 What is TWAIN? .
i i i.
1-1 Chapter 1 Introduction Welcome Thank you for purchasing the Info ImageReader Express Scanner. This product is the result of our efforts to develop high technology computer peripherals that are easy to use, affordably priced, and that enhance your computing experience.
1-2 With the introduction of Windows 95, the TWAIN specification has been overhauled to take advantage of the 32-bit architecture. When you install our scanner driver under Windows 95, you will have two TWAIN sources — one for 16-bit applications and one for 32-bit applications.
1-3 OCR: Software in this category is designed to recognize alphanumeric characters in preparation for export to word processing and desktop publishing applications. In other terms, it creates text files. OCR software will not provide image editing capabilities.
1-4 Because scanners are capable of inputting large amounts of data in relatively short periods of time, they commonly push computer systems to the limits of their capabilities. Before beginning any scanning task or operation, carefully consider your system’s processing capabilities, especially processor speed, RAM, and available hard disk space.
2-1 Chapter 2 Scanner Installation and Info Technician Installation Installation of the scanner is comprised of few steps and designed to be as easy as possible. The following instructions walk you through connecting the scanner and cable. It is important to note that both the scanning hardware and its supporting software (e.
2-2 The Info Technician The Info Technician is an automatic installation utility that edits and installs the scanner’s device and TWAIN drivers. These drivers provide the link between the scanning hardware, the scanning application, and the computer’s operating system.
2-3 3 . The diagnostic will search for and connect to correct port ad dress. If the diagnostic is successful you will receive the following message (figure 2.
2-4 If the diagnostic is unsuccessful you will receive the following message (fig. 2.3) which most commonly indicates that you need to follow the di- rections below to change the Parallel port option in your computer’s BIOS setup.
2-5.
3-1 Chapter 3 Using your scanner Scanning features and controls Before scanning images, it is important to understand the scanner’s basic hardware features as well as the software controls. Hardware features Power The scanner requires its own power source (use the adapter provided).
3-2 Paper loading Place the document to be scanned face down on the scanning glass. Books, magazines and other 3-dimensional objects can be easily scanned as well, by laying them on the scanning glass. With bound materials and other objects, the cover is designed to lift up at the hinge to accommodate the item being scanned.
3-3 Fig. 3.2 TWAIN Interface (Using Image Pals 2 GO! software) Preview Window The interface window’s right side displays Pre-scanned images. The Crop Box (dashed line) surrounding the perimeter is used to select the area of the pre-scanned image that you want to scan.
3-4 on Help in the top portion of the window for more information about scan settings. Gamma Gamma refers to the numerical value for the level of intensity or brightness in the tones of color or grayscale images. As the number increases the tonal intensity increases.
3-5 • Image Size Displays the amount of memory that the image will use: Image size = scan mode x resolution x scan area. Tip: Image size can be reduced by cropping pre-scanned image. • Image Measurement Displays unit of image measurement. Can be converted between inches or centimeters by selecting Advanced > Preferences.
3-6 RGB Color: Scan color images and photographs in RGB Color mode when you want to capture and reproduce all the color data. To manage file sizes efficiently, take careful note of the guidelines for resolution (described later) when scanning in RGB.
3-7 Faxing images: Any image you intend to fax from a PC-based fax modem should be scanned at 200 dpi. Fax machines only receive images at 200 dpi, and some programs may fault if you try to scan at higher resolutions. Refer to the chart below for resolution setting guidelines.
3-8 Scanning images Scanning images with your ImageReader scanner is a relatively simple process. The steps below walk you through selecting the appropriate TWAIN source to use, and then scanning an image or document. If you experience problems during any of these steps, please refer to the appendix, Troubleshooting.
3-9 The scanning process The initiation of the scanning process may vary from application to application. Consult the application’s manual for more information if the steps below don’t result in a scan. The instructions provided in these steps assume the application uses the most common process.
3-10.
A-1 Appendix A General Scanning Tips 16-bit versus 32-bit applications: Image Pals 2 GO! - the image editing software and InfoCenter the scanning control software included with the ImageReader Express scanner- are both16 bit applications. 16 bit applications are supported by Windows 3.
A-2 performance. If you still experience problems with your scanning speed, follow the directions on page A-2 and A-3 to verify the scanner’s port address and possibly change your computer’s BIOS setup. Printer Problems? Cannot print to printer Check the cable connections on the printer and the scanner.
A-3 2. Be sure you have selected the appropriate source for the application you are scanning into. Most 32-bit applications require you use the Flatbed Scanner (32) source, and 16-bit applications require you use the Flatbed Scanner (16) source.
A-4 2. Check your computer’s BIOS setup to make sure that your printer port is set for EPP or SPP. The ImageReader Express scanner will work on ports that are set for EPP and SPP. The fastest of the modes is EPP. Follow these direc- tions to change your computers parallel port mode.
A-5 Scanner care Info ImageReader scanners are designed to provide years of trouble free service. To assist in realizing this end, follow the guidelines listed below. 1 . Avoid using the scanner in a dusty environment, and keep it as dust-free as possible.
A-6 • Changes or modifications not expressly approved by the manufacturer or authorized service center could void the user’s authority to operate this equipment. • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver.
デバイスCompaq P/N DOC-FB4Bの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Compaq P/N DOC-FB4Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCompaq P/N DOC-FB4Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Compaq P/N DOC-FB4Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Compaq P/N DOC-FB4Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Compaq P/N DOC-FB4Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCompaq P/N DOC-FB4Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Compaq P/N DOC-FB4Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCompaq P/N DOC-FB4Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
