Compex SystemsメーカーSGX3226の使用説明書/サービス説明書
ページ先へ移動 of 90
.
i © Copyright 2004 Compex Systems Pte Ltd All Rights Reserved This document contains informat ion, which is protected by co pyright. Reproduction, adaptation or translation without prior permission is prohi bited, except as allowed under the copyright laws.
ii FCC NOTICE This device has been tested and found to comply with the limits for a C lass A digital device, pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provid e reasonable protection again st harmful interf erence in a r esidential install ation.
iii Therefore, this product is in conformity with the following regional standards: FCC Class A following the provisions of FCC Part 15 directive; CE Mark following the provisions of the EC directive. This Class A digital apparatus co mplies with Canadian ICES-003.
iv Technical Support Information The warranty information and registration fo rm are found in the Quick Install Guide. For technical support, you may c ontact Compex or its subsidiar ies.
v About This Document The product described in th is document, Comp ex Web Management Switch S eries, Compex SGX3226 is a licensed product of Compex Sy stems Pte Ltd. This document contains instructions for installing , configuring and usin g Com pex SGX3226.
vi References on Menu Command, Push Button, Ra dio Button , LED and Labe l appear in Bold. For example, “Click on the Ok b utton”.
Table of Contents vii Copyrights © 2004 Compex S ystems P te Ltd .................................................................................. i Trademark In form ation.............................................................................
Table of Contents viii Chapter 5 Web-b ased Interface Confi guration for C ompex SGX3226 .............. 19 5.1 Port Confi gurati on ............................................................................................................. ... 19 5.
Table of Contents ix Chapter 8 Using S YSTEM TOOLS Menu ............................................................ 58 8.1 Set Syst em Clock .............................................................................................................
Chapter 1 Product Overview 1 Chapter 1 Product Overview 1.1 Introduc tion Compex Managed Switch Series Compex SGX3226 is a 24-po rt 10/100Mbps Fast Ethernet SNMP Managed Switch with In tegra ted Router, which com es with 2 expansion slots to support 1000 Base-T Gigabit Copper Modules for uplink connection.
Chapter 1 Product Overview 2 • Port Trunking Up to 4 ports may be defined for Port Trunking, delivering up to 800Mbps cascading bandwidth between two switches. • VLAN support and tagging Compex SGX3226 can support up to 32 p ort-based VLANs and static configuration of 802.
Chapter 1 Product Overview 3 1.3 Network Applications Compex SGX3226 may be used in the b ackbone with ADSL broadband connection as the access to the Internet. Virtual LAN may be defined on Compex SGX3226 to logically segmenting your LAN into multiple broadcast dom ains with workgroup classifications.
Chapter 1 Product Overview 4.
Chapter 1 Product Overview 5 Optional modules may be installed on Co mpex SGX3226 to support inter-building connectivity using fi ber optical cables. Figure 1.
Chapter 2 Getting Started 6 Chapter 2 Getting Started This chapter outlines the basic requirem ent for any installation and configuration of Compex SGX3226.
Chapter 2 Getting Started 7 2.2 Setup Consid eration s Prepare checklist before you start: • Check your Local Area Network configura tions. Check if the network has Static IP addressing or dyna mic IP assignment.
Chapter 3 Hardware Installation 8 Chapter 3 Hardware Installation This c hapter gi ves an in- sight on t he hardwa re installation aspect from installing the ph ysical cables to resetting the device.
Chapter 3 Hardware Installation 9 3. Connect the power cord to the power so cket on the rear pan el of Compex SGX3226. NOTE For proper ventilation, do allow about at least 4 inches of clearance on the front and 4 inches on the back o f the Switch. Th is is especially i mportant for enclosed rack ins tallation.
Chapter 3 Hardware Installation 10 3.2 Connecting Your modem to Compex SGX3 226 Connect one end of the modem cable to an y port of Compex SGX3226. The other end of the modem cable is to b e connected to your own ADSL/Cable modem. (Set up the modem for dial-up connection.
Chapter 4 Software Installation 11 Chapter 4 Software Installation This chapter explains th e basic setup proce dures of configuring Compex SGX3226 using the web-based interface. For more detailed in form ation about Compex SGX3226, please r efer to Chapter 7 “Advanced Configuration for Compex SGX3226” on Page 41 .
Chapter 4 Software Installation 12 4.2 NPfind Utility Software Npfind is an utility program for Windows whic h can be used to find out the IP address of Compex’s product.
Chapter 4 Software Installation 13 4.3 Hyper Termi nal Configuration Compex SGX3226 can easily be configur ed via H yper Terminal or Web-based Interface. In this s ection, we will go through the steps in con figuring the Hyper Terminal Program. For web-based interface c onfiguration, you may refer to Chapter 5 for details.
Chapter 4 Software Installation 14 3. Next, configure your Port Settings as shown in the figure an d click Apply to update the changes. 4. Click Ok button to confirm the settings. After setting all configurat ions, reset the power supply of Compex SGX3226.
Chapter 4 Software Installation 15 4.4 Accessing to web-based Interface Instead of using Hyper Terminal Program to configure your Compex SGX3226, you can also use your Internet brow ser to acc e ss to the web-based interface to configure your switch. You need to ensure that your TCP/IP protocol has installed and configured.
Chapter 4 Software Installation 16 In Internet Explore r 1. Select the File menu, go to Open and enter th e Gateway’s IP address. This address is set to its factor y default as http ://192.168.100.128. 2. Click on the OK button . An authentication page will appear ed as shown below.
Chapter 4 Software Installation 17 The main menu includes four sections in th e Command Menu Window, namely CONFIGURATION , ADVANCED , SYSTEM TOOLS and HELP .
Chapter 4 Software Installation 18 • Message Window – various actions which is taken previously w hile configuring can be seen in this window • Reboot Switch – restart the device • Logout .
Chapter 5 Web-based Interface Configuration for Compex SGX3226 19 Chapter 5 Web-based Interface Configuration for Compex SGX3226 This chapter explains the con figuration menu t ool that comes with Compex SGX3226 when you use the web-based configuration interface.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 20 Broadcast Rate Limit This function sets broadcast li mit to the desired rate for the specified port. It controls the r eception of broadcasting packets. The ranging for Broadcast rate limit varies from 0% to 100%.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 21 5.2 VLAN Config uration Compex SGX3226 supports Virtual LAN, wh ich logically group the connection into VLANs for traffic isolation and security purposes. Both tagged and untagg ed based VLAN are supported with a total maximum of 31 groups.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 22 5.3 Trunk Config uration Port Trunking is the ability to group together several switch p orts to increase the bandwidth between Compex SGX3226 and ot her switch. This is an inexpens ive method to increase throughput betw een switches ( or to servers).
Chapter 5 Web-based Interface Configuration for Compex SGX3226 23 5.4 DHCP Co nfig The Dynamic Host Configuration Prot ocol (DHCP) provides conf iguration Parameters to Internet hosts.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 24 DHCP Start IP Address & DHCP End IP Address These parameters specify the range of the IP address of which the DHCP Server will assign. Primary DNS IP Add ress & Secondary DNS IP Address DNS is an Internet servic e that translates domain names into IP addresses.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 25 5.4.1 DHCP Active Leases This section indicat es the information of the PC whereby the IP addresses is dynamic ally assigned t o it in the same network. The expire time indicates the time when th e system need ed to upd ate the IP Address of that particular PC.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 26 NOTE The DHCP server will ignore the Host Name if it finds a match in the Hardware Address. It checks the Hardware Address first, so you need only to enter either th e Host Name or Hardware Address.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 27 5.5 WAN Config You are allowed to connect up to 4 modems to your Compex SGX3226. The WAN type is pre-confi gured as disabled . Compex SGX3226 supports Static IP , Dynamic IP and also PPP Over Ethernet (PPPoE).
Chapter 5 Web-based Interface Configuration for Compex SGX3226 28 PPPoE: Select this connection type if you have s ubscribed to ADSL in a country utilising standard PPPoE for authentication, for instance: • If you are in Germany which uses T-1 connection.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 29 5.6.1 Static IP Setting (IP Forwarding) To set a static IP Address, 1. Enter a private IP Address, such as 192.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 30 When to use Port–For warding Virtual S erver When your ISP assign you with only one fixed Public IP address, and you want to define .
Chapter 5 Web-based Interface Configuration for Compex SGX3226 31 The Internet makes two transport protocols av ailable to its ap plications, namely T CP and UDP. Transmission Control Protocol (TCP) For building a reliable communications stream on top of the unreliable pac ket Internet Protocol (IP).
Chapter 5 Web-based Interface Configuration for Compex SGX3226 32 1. Select Add button and the screen w ill facilita te the users to add rules for IP Packet Filtering . IP Address Three values are possible for this field: Any, Range or Single. If you have selected Any, you may leave th e next two fields blank.
Chapter 5 Web-based Interface Configuration for Compex SGX3226 33 2. Enter the appropriate data in t he respective entri es for Rule Name , IP Address , Destination Port , Day of the W eek and Time of the Da y . 3. Press the Apply button to add the new rule and Save button to update the changes.
Chapter 6 Configuring Your Wide Area Network 34 Chapter 6 Configuring Your Wide Area Network This section explains how to configure Comp ex SGX3226 to distribute Bro adband Internet Access to the Wide Area Network.
Chapter 6 Configuring Your Wide Area Network 35 6.2 Setup on Compex SGX3226 for Broadband Internet Access For such service, you should have the IP address info ready that is provided by your ISP before proceeding. Figure 6.1 Connection between Compex SGX3226 and modem 1.
Chapter 6 Configuring Your Wide Area Network 36 6.3 Configuring Static IP Connection 1. Select WAN Config from the Command window. 2. Go to WAN Type and select Static IP Address . 3. Enter the IP addresses in it s respective field. All these information is provided b y your ISP/Network Administrator.
Chapter 6 Configuring Your Wide Area Network 37 6.4.1 How to configu re Singapore Cable Vision (SCV) Service SCV provides Dynamic IP address connection service. Assume that your SGX3226 is not in the Dynamic IP setti ng, please follow these procedures to change to the appropriate WAN type.
Chapter 6 Configuring Your Wide Area Network 38 5. Enter the required entr y as shown. 6. Click on Apply and then Save button to update the changes. 7.
Chapter 6 Configuring Your Wide Area Network 39 3. Click on Save button to update the ch anges. Username and Password The information is given by the Internet Service Provider. Service Name Certain ADSL Internet subscriptions require the user to enter the service name.
Chapter 6 Configuring Your Wide Area Network 40 To connect to th e Internet serv ice Click on the Connect button. When the connection is established, the status appeared on the screen wi ll indicated as connected.
Chapter 7 Advanced Configuration for Compex SGX3226 41 Chapter 7 Advanced Configuration for Compex SGX3226 In this chapter, you can understan d how the conf iguration on Spanning Tree Protocol (STP) was easily done. Compex SGX3226 impl ements Internet Group Multicast Protocol (IGMP) function which forwards multicast traffic intelligently.
Chapter 7 Advanced Configuration for Compex SGX3226 42 1. Select STP Config from the Command window. Bridge Port This option shows the port of the bridge that connects to th e root bridge. Path Cost This option sets the Spanning Tree path cost for this port.
Chapter 7 Advanced Configuration for Compex SGX3226 43 7.1.2 STP Bridge Spanning-Tree Protocol defines a tree th at spans all switches in an extend ed network.
Chapter 7 Advanced Configuration for Compex SGX3226 44 Hello Time The Hello time of th e Spanning Tree field shows the number of seconds between the transmissions of spanning Tree protocol configuration messages.
Chapter 7 Advanced Configuration for Compex SGX3226 45 7.2 IGMP Con fig Internet Group Management Prot ocol (IGMP) is an Internet protocol that provides a way for an Internet computer to report its multicast group membership to adjacent router s. It allows Compex SGX3226 to forw ard multicast traffic in telligently.
Chapter 7 Advanced Configuration for Compex SGX3226 46 1. Select IGMP Config from the Command window. 2. Choose enabled in the IGMP state field. 3. Click on the radio button to select the version for IGMP. Refer to the next section for the explan ation on IGMP v1.
Chapter 7 Advanced Configuration for Compex SGX3226 47 When a router receives a R eport, it a dds the gro up being reported to the list of multicast group memberships on th e network on which it received the Report and sets the timer for the membership to the [Group Membership Interval].
Chapter 7 Advanced Configuration for Compex SGX3226 48 If you select Auto Select in the Stacking State field, the system will elect the switches in connect in the stack with the smalle st MAC address to be the master.
Chapter 7 Advanced Configuration for Compex SGX3226 49 7.3.1 Application on Stack Management From the figure shown below, SGX3226 Unit #1, #2 and #3 are stacked accordingly. Individual switches are linked to its respective workgroup, such as Workgroup A, B and C .
Chapter 7 Advanced Configuration for Compex SGX3226 50 may name your switch for identi fication. Refer to Section 8.3 “System Configuration” for details. 2. Next, disconnect one end of th e Et hernet cable from SGX3226 Unit #1 and establish a link to Unit #2 .
Chapter 7 Advanced Configuration for Compex SGX3226 51 6. Access to the web-based interface again. This time, you will be able to view all switches attached to this stack. 7. Next, after click ing on the sele cted switch, you wi ll be able to view the necessary information for switc hes.
Chapter 7 Advanced Configuration for Compex SGX3226 52 1. Select SNMP Config from the Command window and enabled the SNMP state. 2. Type in either “Public” or “Private” for both R ead-only Community String and Read-Write Comm unity String. 3. Choose the Trap Setting from 1 to 8 and enter the IP Address and Subnet Mask correctly.
Chapter 7 Advanced Configuration for Compex SGX3226 53 7.6 Port Security Of all 26 ports, some of the ports may need to assign to the specific port. In order to fulfill this act, MA C Address should be added to that particular port. This is to restrict other users from using the s tatic port.
Chapter 7 Advanced Configuration for Compex SGX3226 54 7.7 MirrorPor t Config 7.7.1 Using Mirror Port to monitor Traffic This function allows you to set up a ‘mirror’ port of any specified port/s, such that you c an monitor the traffi cs of the monitored port/s or VLAN without intervening them.
Chapter 7 Advanced Configuration for Compex SGX3226 55 7.8 Aging Contr ol Aging control is for the aging of address en tries in the switch’s forwarding table.
Chapter 7 Advanced Configuration for Compex SGX3226 56 7.9 Address Se arch 7.9.1 Host Search Host Search is for searching a hos t by IP addres s on the network, and getting the port number to which th e host is connect ed. It is us eful while configuring the VLAN.
Chapter 7 Advanced Configuration for Compex SGX3226 57 7.9.2 MAC Address Search This feature hel ps to look for the par ticular MA C Address stated in the field, which provides a useful way while configuring the VLAN. Th e system will search through the device for the port’s ownership of that particular PC.
Chapter 8 Using SYSTEM TOOLS Menu 58 Chapter 8 Using SYSTEM TOOLS Menu 8.1 Set System Clock It is recommended that you configure Compex SGX3226’s timer to synchronize with your PC so that you can ut ilize the tim e-based functions.
Chapter 8 Using SYSTEM TOOLS Menu 59 8.2 Remote Management This function allows you to access your Compex SGX3226 through Internet (WAN) or Local Area Network. The figure illustrates that you can configure the Compex SGX3226 even when you are at home.
Chapter 8 Using SYSTEM TOOLS Menu 60 3. You may go to WAN Config to check for your WAN port’s IP address. NOTE You need to set the gateway of your Co mpex SGX3226 to 0.0.0.0 in ord er to allow WAN access from your home. 4. Go to System Config from the Command window.
Chapter 8 Using SYSTEM TOOLS Menu 61 8.3 System Confi guration This is an easy access in configuring th e system. You can configure IP address, Subnet Mask or Default Gate way of the management board in C ompex SGX3226.
Chapter 8 Using SYSTEM TOOLS Menu 62 8.4 System In format ion This option displays the necessary da ta about the mana gement system. 1. Click on System Information from the Command window. 8.5 Chan ge Password This option allows the S ystem Administrator to amend the current password.
Chapter 8 Using SYSTEM TOOLS Menu 63 8.5.1 Forget your pas sword You can simply reset the passwor d using Hyper Terminal program. 1. In the Hyper Term inal environment, swit ch OFF and ON Com pex SGX3226. 2. When “Press ENTER to stop auto-boot …” message app ear on the screen, hit “Enter” key on the keyboard within 5 seconds.
Chapter 8 Using SYSTEM TOOLS Menu 64 8.6 Firmware Upgrade You can simply download the ne wer firmware version from http://www.compex.com.sg. To check your current firmware version, re fer to Section 8.4 on "System Information” on Page 62 . Once you downloaded the latest firm ware, saved it into your hard disk.
Chapter 8 Using SYSTEM TOOLS Menu 65 8.7 Save or Reset Setti ngs This function allows you to save your confi guration or reset your configuration to its default setting. 1. Click on Save or Reset Settings from the Command window 8.7.1 Save By clicking Save button, you will save all your settings that you have configured in Compex SGX3226.
Chapter 8 Using SYSTEM TOOLS Menu 66 2. Select Save button and go to your preferred folder to save this file. Do remember the lo cation that you intend to sav e this file. Click OK button to proc eed the transaction. 3. After downloading process has completed, the following message will appear.
Chapter 8 Using SYSTEM TOOLS Menu 67 8.7.4 Clear and Reset By clicking this option, you will restore Com pex SGX3226 to factory defaults. And you will h ave to re-enter al l the configurat ion information to our network. 1. Click on Clear and Reset button.
Chapter 8 Using SYSTEM TOOLS Menu 68 8.8 Message Window This window will list out the action/s taken while doing configur ing. It helps you to dig out the history of various action/s. 1. Click on Message Window from the Command window. To save all your actions, 1.
Chapter 8 Using SYSTEM TOOLS Menu 69 8.10 Logout You may click on the Logon button to access to the main page of Compex SGX3226. However, if you have assigned a new IP a ddress to your switch, you need to enter your new IP address at the addr ess bar in order to access to the main page.
Chapter 9 Using HELP Menu 70 Chapter 9 Using HELP Menu 9.1 Technical Support For more information on technical support, click on Technical Support from the Command window. Here, you can refer to th e respectiv e technical group supported by Compex in the different countries as shown belo w: 1.
Chapter 10 Application on Virtual LAN 71 Chapter 10 Application on Virtual LAN In an untagged VLAN application, you can assign a group of ports within a switch as members of a specific VLAN.
Chapter 10 Application on Virtual LAN 72 VLAN C, VLAN D and VLAN E are assigned with VID of 02, 03 and 04 respectively. S witch 1 and Switch 2 are in terconnected vi a Port 26, wher eby the port are tagged with an ID. Control S tation, PC 1, PC 2 and PC 3 are connected to Port 2, 9, 16 and 22 respectively.
Chapter 10 Application on Virtual LAN 73 Figure 10.1 Untagged and Tag VLAN setting for Switch 1 Configuration for Switch 2 Follow the procedures as shown in configuring Switch 1. Now, users within the sam e VLAN is able to communicate with one another.
Appendix I Panel Views and Descriptions 74 Appendix I Panel Views and Descriptions Please note that actual product appearance m a y slightly differ depending on the hardware version.
Appendix I Panel Views and Descriptions 75 Figure 10.3 Front View of Compex SGX3226 (Section #2) Figure 10.4 Back View of Compex SGX3226 Features Status and Indication 1 24 RJ45 10/100Mbps Ports Use U.
Appendix I Panel Views and Descriptions 76 Features Status and Indication 5 Redundant Power Socket Additional Power Socket (Optional). With this RPS, Compex SGX3226 still able to o perate even Primary Power Supply is down. 6 Reset Button By pushing the reset button once, • The switch will cle ar all previou s temporary error • P.
Appendix I Panel Views and Descriptions 77 Features Status and Indica tion Steady Red Temperature inside th e chassis i s too high for normal operation. Therma l fault occurs. 11 Thermal Fault LED Off In normal condition. Steady Red Ventilation Fans have problems.
Appendix I Panel Views and Descriptions 78 Features Status and Indica tion Steady Green Full Duplex Mode. 19 Full Duplex LEDs (Port #25 & Port #26) Off Half Duplex Mode. Steady Green Full Duplex Mode. 20 Full Duplex LEDs (Port #1 to Port #24) Off Half Duplex Mode.
Appendix II Technical Specifications 79 Appendix II Technical Specifications Industry Standards Complies with • IEEE 802.1d: Spanning Tree Protocol • IEEE 802.1Q: Tagged VLAN • IEEE 802.3: 10 Base-T • IEEE 802.3u: 100 Base-TX • IEEE 802.3ab: 1000 Base-T • IEEE 802.
Appendix II Technical Specifications 80 Switching Method Store-and-Forward LED Indicators • System Status • Power • Link/Activity • Redundant Power Supply • Thermal and Fan Fault • Mute .
デバイスCompex Systems SGX3226の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Compex Systems SGX3226をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCompex Systems SGX3226の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Compex Systems SGX3226の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Compex Systems SGX3226で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Compex Systems SGX3226を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCompex Systems SGX3226の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Compex Systems SGX3226に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCompex Systems SGX3226デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。