AGFAメーカーE52の使用説明書/サービス説明書
ページ先へ移動 of 63
a b SnapScan™ e42/e52 Ow ner’s Guide ! Prefac e This chapter gives you inform ation about SnapScan and about How to Use this Online Guide . ! Chapter 1: Preparing the Sc anner “Preparing the Sc anner” explains how to prepare your SnapScan for installation.
Trademark s 2 Trademarks Agfa and the Agf a rhom bus are tradem ark s of Agfa- Gevaert A.G. ScanW ise and SnapScan are tr adem arks of Agf a-Gevaert N.V. Acrobat and Photoshop LE ar e tradem ark s of Adobe System s Incorpor ated which m ay be registered in c ertain ju risdictions .
Contents 3 Contents Preface ........................................................................................................................ ....................... 5 About SnapScan .............................................................
Contents 4 Selecting a Diff erent ScanW ise Configuration .......................................................................... 41 Modifying an Existing Configuration ...............................................................................
Preface 5 Preface ! About SnapScan ! Environm ental Requirem ents ! Precautions ! Cleaning y our Sc anner ! How to Use this Online Guide ! How to Print this Guide.
Preface 6 A bout SnapSc an In this Owner’s G uide, the nam e SnapScan is used f or both the SnapScan e42 and e52. The SnapSc an is a one pass f latbed color s canner with a resolution of 1200 x 2400 ppi equipped with a cold cathode lam p. It is based on CCD (Charge-Coupled Device) scanning technology.
Preface 7 Precautions For your own safety and that of y our equipm ent, respec t consc ientiously the Environm ental Requirem ents and alway s tak e the f ollowing precautions: " Check frequently whether there is no overheating of the AC adapter .
Preface 8 How to Use this Online Guide To … Click … jum p to another location within or outside the docum ent blue text jum p to a topic in the docum ent click the corr esponding book m ark jum p .
Chapter 1: Prepari ng the Scanner 9 Chapter 1: Preparing the Scanner This chapter helps you to prepare your SnapScan for installation. ! Unpack ing the Scanner ! Tak ing a Closer Look ! Changing the H.
Chapter 1: Prepari ng the Scanner 10 Unpacking the Scanner 1 Open the pack ing box and car efully unpack all the item s. 2 Check each item to m ake s ure that everything listed on the Packing Lis t (printed on the box) is present. Check if there is no visible def ect.
Chapter 1: Prepari ng the Scanner 11 SnapScan e52: 1 4 5 3 2 6 7 8 9 10 11 1. replaceable handle 2. adjustable docum ent c over 3. transparenc y lam p cover ( for reflec tive scanning) 4. transparenc y module 5. glass plate 6. replaceable button cap 7.
Chapter 1: Prepari ng the Scanner 12 The f ollowing figure illustrates the location of the dif fer ent ports at the rear of your scanner (SnapScan e42/e52). 12 3 1. USB Port (labeled with the USB icon ) to mak e a connec tion to y our c omputer 2. Trans parency Module Port (SnapScan e52 only ) 3.
Chapter 1: Prepari ng the Scanner 13 2 Remove the handle by sliding it out of its lip. 3 Choose a new handle. 4 Slide the handle in the lip. 5 Press the f ront of the handle down until y ou hear a clic k.
Chapter 1: Prepari ng the Scanner 14 Changing the Button Cap It is possible to c ustom ize y our SnapScan by changing the button cap. 1 Open the button panel by pushing the button cap. 2 Pull out the upper part of the button cap. 3 Remove the button c ap by lifting it at the underside and sliding it out of its lip.
Chapter 1: Prepari ng the Scanner 15 # Note: Do not rem ove the button cap while the button panel is still c losed. 4 Choose a new button cap. 5 Press the upper part of the button c ap over the button panel into the scanner . 6 Press the under side of the button c ap in the right position.
Chapter 2: Ins talling the Sc anner for PC 16 Chapter 2: Installing the Scanner for PC This chapter shows you how to set up y our SnapScan f or your PC.
Chapter 2: Ins talling the Sc anner for PC 17 Minimum System Requirements " A USB port " A Pentium® process or " A 14 inch color m onitor " A video card that can dis play a minim .
Chapter 2: Ins talling the Sc anner for PC 18 Installing the Scan ner Softw are 1 Insert the Agf a ScanW ise CD-ROM in your CD-ROM drive. # Note: If the ScanW ise Ins taller program does not appear autom atically, carry out the following instruc tions: 1 Double-click My computer .
Chapter 2: Ins talling the Sc anner for PC 19 By regis tering on line, you w ill cr eate y our pers onal e-Service ac count and you will enjoy the following benefits : 1.
Chapter 2: Ins talling the Sc anner for PC 20 5 Click View the ScanW ise movie to s ee the demo. 6 Click Inst all addition al softw are to install sof tware that helps you to organize and adjust y our digital images and to create your personal W eb pages (s ee Installing Additional Soft ware ).
Chapter 2: Ins talling the Sc anner for PC 21 Connecting the Sc anner to Your PC Caution: For your safety, use the adapter that comes with this product. Do not use any substitute. Misuse of the power adapter can caus e serious dam age to the produc t and a safety haz ard while using it.
Chapter 2: Ins talling the Sc anner for PC 22 Installing A dditional Softw are If you want to use OCR (Optical Charac ter Recognition) you will have to install Readiris . Insert the CD-ROM and f ollow the instructions on your screen. If you want to use an image editing tool you can install Adobe Photoshop LE.
Chapter 3: Confi guring Butt ons on Your PC 23 Chapter 3: Configuring Buttons on Your PC ! Selecting a Diff erent ScanW is e Configuration ! Modifying an Existing Configuration ! Creating a New Config.
Chapter 3: Confi guring Butt ons on Your PC 24 Selecting a Different Scan Wise Conf iguration It is possible to as sign a diff erent conf iguration to one of the f our buttons of your SnapScan.
Chapter 3: Confi guring Butt ons on Your PC 25 Modifying a n Existing Configuration It is possible to m odif y an exis ting configur ation and assign it to one of the four buttons of your SnapScan. T he following exam ple will show y ou how this is done.
Chapter 3: Confi guring Butt ons on Your PC 26 The O rganize Actions window display s all predef ined and user def ined conf igurations. # Note: Remove will be enabled when a user def ined action is s elected. T he default actions cannot be rem oved. 4 Select Scan Im age to File ( autoselect).
Chapter 3: Confi guring Butt ons on Your PC 27 a. All predefined s ettings are available via the dif ferent dr op-down menus . b. The res olution depends on the choic e of destination. c. T he output dimens ions can be m anaged via the Dim ension dr op-down list.
Chapter 3: Confi guring Butt ons on Your PC 28 11 Select My Scan Image to File ( autoselect) f rom the drop-down list nex t to the e-m ail button. 12 Click OK. Pushing the e-m ail button will send the sc anned im age to a file instead of to your mail recipient.
Chapter 3: Confi guring Butt ons on Your PC 29 3 Click Organize. The O rganize Actions window appears. The O rganize Actions window display s all predef ined and user def ined conf igurations. # Note: Remove will be enabled when a user def ined action is s elected.
Chapter 3: Confi guring Butt ons on Your PC 30 a. All predefined s ettings are available via the dif ferent dr op-down menus . b. The res olution depends on the choic e of destination. c. T he output dimens ions can be m anaged via the Dim ension dr op-down list.
Chapter 3: Confi guring Butt ons on Your PC 31 10 Click Close. You return to the Configure Buttons window. 11 Select your new configuration fr om the dr op-down list next to the e-m ail button. 12 Click OK. The e-m ail button is configur ed with y our personal s ettings.
Chapter 3: Confi guring Butt ons on Your PC 32 " Dimens ion: If you want a specified output range, c lick the Dimens ion drop-down list. A list of additional options will appear. Select the dim ension ( width or height) you w ant to specif y. Enter the desired range and s elect the cor rect unit f rom the drop-down list.
Chapter 4: Ins talling the Sc anner for Macint osh 33 Chapter 4: Installing the Scanner for Macintosh This chapter shows you how to set up y our SnapScan f or your Macintosh.
Chapter 4: Ins talling the Sc anner for Macint osh 34 Minimum System Requirements " A USB port " A PowerPC ® proces sor " A 14 inch color m onitor with thousands of c olors f or an acc.
Chapter 4: Ins talling the Sc anner for Macint osh 35 Installing the Scan ner Softw are 1 Insert the Agf a ScanW ise CD-ROM in your CD-ROM drive. The Agf a ScanW ise window appears.
Chapter 4: Ins talling the Sc anner for Macint osh 36 By regis tering on line, you w ill cr eate y our pers onal e-Service ac count and you will enjoy the following benefits : 1.
Chapter 4: Ins talling the Sc anner for Macint osh 37 6 Click View the ScanW ise movie to s ee the demo. W hen the software is ins talled y ou m ay be asked to restar t y our c om puter.
Chapter 4: Ins talling the Sc anner for Macint osh 38 Connecting the Sc anner to the Mac intosh Computer Caution: For your safety, use the adapter that comes with this product. Do not use any substitute. Misuse of the power adapter can caus e serious dam age to the produc t and a safety haz ard while using it.
Chapter 4: Ins talling the Sc anner for Macint osh 39 Installing A dditional Softw are If you want to use OCR (Optical Charac ter Recognition) you will have to install Readiris .
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 40 Chapter 5: Configuring Buttons on Your Macintosh Computer ! Selecting a Diff erent ScanW is e Configuration ! Modifying an Existing Con.
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 41 Selecting a Different Scan Wise Conf iguration It is possible to as sign a diff erent conf iguration to one of the f our buttons of your SnapScan. Following exam ple will show y ou how it is done.
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 42 Modifying a n Existing Configuration It is possible to m odif y an exis ting configur ation and assign it to one of the four buttons of your SnapScan. T he following exam ple will show y ou how this is done.
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 43 3 Click Organize. The O rganize Actions window appears. The O rganize Actions window display s all predef ined and user def ined conf igurations. # Note: Remove will be enabled when a user def ined action is s elected.
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 44 6 Click Save As. The Save Ac tion Configuration window appears. 7 Enter the nam e of your configuration. 8 Click OK. You return to the Settings For window. 9 Click OK. You return to the Organize Actions window and y our conf iguration will be added to the Actions list.
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 45 Creating a Ne w Configuration It is possible to c reate a new configuration and as sign it to one of the f our buttons of your SnapScan. T he following exam ple will show y ou how this is done.
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 46 The O rganize Actions window display s all predef ined and user def ined conf igurations. # Note: Remove will be enabled when a user def ined action is s elected. T he default actions cannot be rem oved.
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 47 10 Click Close. You return to the Configure Buttons W indow. 11 Select your new configuration fr om the dr op-down list next to the e-m ail button. 12 Click OK. The e-m ail button is configur ed with y our personal s ettings.
Chapter 5: Confi guring Butt ons on Your Macint osh Com puter 48 " Dimens ion: If you want a specified output range, c lick the Dimens ion drop-down list. A list of additional options will appear. Select the dim ension ( width or height) you w ant to specif y.
Chapter 6: Making Y our First S can 49 Chapter 6: Making Your First Scan 1 Place a color photogr aph face down on the glass plate with the top side against the middle of the front r uler. The optical perf orm ance of a CCD scanner is always best near the middle of the glass plate.
Chapter 6: Making Y our First S can 50 3 For PC : In the Start m enu, select Pr ogram s, Agfa Sc anW ise, ScanW ise to open the ScanW ise application. -or- For Macintosh : Go to the Agfa ScanW ise f older on your hard disk and double- click . 4 Select your scanner (if needed).
Chapter 7: Us ing the Transparenc y Module (SnapScan e52 onl y) 51 Chapter 7: Using the Transparency Module (SnapScan e52 only ) To s can negatives, trans parencies or slides you have to use the transparency module on your SnapScan e52.
Chapter 7: Us ing the Transparenc y Module (SnapScan e52 onl y) 52 2 Align the holder with the negatives/transparencies on the scanner glas s plate. T hen, continue with inst ruction 4. 3 If you scan slides: 1 Align the holder on the scanner glass plate.
Chapter 7: Us ing the Transparenc y Module (SnapScan e52 onl y) 53 2 Position the original slide in the holder . 4 Close the docum ent cover . 5 Click the ScanW ise icon to s tart the program . The Agf a ScanW ise window opens. 6 Click the arrow on the Preview button to switch between transparenc ies and ref lectives.
Chapter 7: Us ing the Transparenc y Module (SnapScan e52 onl y) 54 calibration area calibration area ! Note: Please m ake s ure not to touch the glas s plate in the calibration ar ea.
Appendix A: Troubleshoot ing 55 Appendix A: Troubleshooting This section gives solutions f or som e com m on problem s y ou m ay come acr oss when star ting up or using your SnapScan. There is no USB port fre e for your s canner. " Check if you can use a USB port on the k ey board or m onitor .
Appendix A: Troubleshoot ing 56 Windows 98 fails to detect the scanner w hen you connect it for the first time (PC ONLY). " Check if the sc anner is connec ted with the USB cable to y our com puter and that the AC adapter is plugged in. It can always happen that a USB port is dam aged, therefor e try the other USB port of your com puter.
Appendix A: Troubleshoot ing 57 The e-mail function is not working (PC ONLY). ScanW ise PC uses the default MAPI (Mic rosof t Messaging API) client as e-m ail des tination. This means you need a MAPI compatible e-m ail client and it als o has to be conf igured corr ectly.
Appendix B: Technic al Inform ation 58 Appendix B: Technical Information Tec hnical specif ications are subjec t to change without notice. Scanne r type : SnapScan e42 SnapScan e52 Desk top, flatbed, .
Appendix B: Technic al Inform ation 59 Dimensions : - length SnapScan e42: 496 mm ( 19.5 “) - length SnapScan e52: 501 mm ( 19.7 “) - width: 337 mm ( 13.3 “) - height: 94 mm ( 3.7 “) - weight SnapScan e42: 3.9 kg ( 8.6 lb) - weight SnapScan e52: 4.
Appendix C: Regulation Com plianc e 60 Appendix C: Regulation Compliance ! Safety Regulations ! Electrom agnetic Com patibility ! Declaration of Conf orm ity: SnapScan e42/e52.
Appendix C: Regulation Com plianc e 61 Safety Regulations SnapScan and its options ar e designed to com ply with: " UL 1950 " CSA C22.2 No. 950 - M89 D3 " VDE 0805 " IEC 950 " GS approved " EN 60950 UL Safety Statement The SnapSc an and the AC adapter are suited f or indoor use only.
Appendix C: Regulation Com plianc e 62 Electromagnetic Compatibility SnapScan is des igned to com ply w ith: " Emis sion EN55022, class B " Imm unity IEC 801-2, IEC 801-3, IEC 801-4 " 4.
Appendix C: Regulation Com plianc e 63 Declaration of Co nformity: SnapScan e42/e52 Manufacter ’s authorized: Georges Br y s Agfa-G evaert N.V. Septestraat 27 B-2640 Mortsel Declares that the produc.
デバイスAGFA E52の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
AGFA E52をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAGFA E52の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AGFA E52の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AGFA E52で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AGFA E52を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAGFA E52の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AGFA E52に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAGFA E52デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。