Concord CameraメーカーVGAの使用説明書/サービス説明書
ページ先へ移動 of 30
User’ s Guide User’ s Guide.
1 T ABLE OF CONTENTS Product Overview ................................................................................................................................................ 2 Front/T op .......................................................
2 ENGLISH PRODUCT OVERVIEW Front/T op Bottom/Back 1. Shutter Button 2. Viewfinder 3. Lens 4. USB Port 5. Buzzer 6. Viewfinder Eyepiece 7. LCD Panel 8. Tripod Socket 9. Mode Button 10. Wrist Strap Holder 1 1. Battery Door 12. Battery Compartment LCD Icon 1.
3 GETTING ST ARTED Congratulations on your purchase of your camera. This camera is featured with 2MB of internal SD RAM memory for storing still images and/or short video clips in the camera. Please read this manual before operating the camera to become familiar with the features of this versatile digital camera.
4 LOADING THE BA TTERIES The camera uses two AAA batteries as power supply . 1. Slide open the battery cover. 2. Insert 2x AAA batteries according to the polarity directions ( + ) ( – ) indicated on the inner side of the battery door. 3. Shut the battery door .
5 T AKING PICTURES BASIC OPERA TION 1. Turn on the camera. 2. Frame the subject in the viewfinder . 3. Press the Shutter button to take the picture. • Y ou will hear a beep when a picture is taken. • The frame number will increase by one frame on the LCD panel.
6 T AKING PICTURES IN LOW RESOLUTION MODE By default, the image resolution is 640 x 480 pixels. Y ou may change the image resolution to low resolution, that is 320 x 240 pixels, to reduce the size of the image to enable the camera to store more pictures.
7 SETTING PC CAMERA FREQUENCY The choice of 50Hz or 60Hz is necessary only when image quality in PC-Camera mode is degraded, due to frequency difference in different countries. Selecting between 50Hz and 60Hz depends on the voltage that is adopted in your country .
8 SOFTW ARE INST ALLA TION GUIDE Note: Do not connect the camera to your computer via the supplied USB cable BEFORE successfully installing the camera’s drivers and software.
9 Step 7 Click [ Next ]. Step 8 Click [ Install ]. Step 9 Installation starts. Step 10 Click [ Finish ]. Note for Windows XP users: While installing the camera driver , screen as below may appear . Click “Continue Anyway” to continue the driver installation.
10 INST ALLING THE ULEAD PHOTO EXPLORER 8.0 SE Step 1 Make sure that your camera is not connected to the computer. Step 2 Make sure the computer is powered on and Windows 98SE, ME, 2000 or XP is running. Step 3 Close any other applications or software you may be running.
1 1 Step 9 Click [ Next ]. Step 10 Click [ Next ]. The Ulead Photo Explorer will be installed in the default C drive. Y ou can click on [Browse] to change the folder . Step 11 Choose the Shortcut location, then click [ Next ]. Note: T o unselect the shortcut location, click on the box with the “v” mark.
12 Step 14 If you do not want to read the Readme file after the Ulead Photo Explorer installation, click on the box with “v” mark to unselect it, and then click [ Next ]. Otherwise, click [ Next ]. Step 15 Installing starts. Please wait for a few seconds.
13 INST ALLING THE ULEAD COOL 360 (OPTIONAL) Step 1 Make sure that your camera is not connected to the computer. Step 2 Make sure the computer is powered on and Windows 98SE, ME, 2000 or XP is running. Step 3 Close any other applications or software you may be running.
14 Step 10 Choose the folder using to store the Ulead Cool 360 by clicking on [Browse], then click [ Next ]. Step 11 Click [ Next ]. Step 12 Click [ Next ]. Step 13 Installation starts. Step 14 If you do not want to install Internet Explore Plugin, click [ No ].
15 Step 16 Click [ Next ]. Step 17 Click [ Finish ]. Note: If your computer isn’t connected to Internet, Internet connection wizard or offline message will appear . Follow the on-screen information to complete the rest steps. Step 18 Click [ Exit ].
16 Step 6 Status bar. Step 7 Click [ Next > ]. Step 8 The files will be saved into C:Program FilesAdobe Acrobat 5 automatically . OR Y ou may change the default folder by clicking [Browse ] and selecting a different folder in your computer . Click [ Next > ] Step 9 Installation progress.
17 CONNECTING THE CAMERA TO THE COMPUTER • DO NOT connect the camera to your computer via the USB cable BEFORE successful installation of the software and camera driver . (page 8) • T o avoid potential short circuit, please DO NOT connect the both ends of the USB cable to the computer ’s USB ports.
18 USING THE ULEAD PHOTO EXPLORER 8.0 The Photo Explorer can be used to download the pictures/video clips from the camera to computer, to edit and enhance the pictures, to play video clips, to create slide show, and to use the camera as a PC camera. DOWNLOADING THE FILES FROM THE CAMERA TO YOUR COMPUTER 1.
19 9. After transferring all the files you would like to keep, you can click “Erase All” to delete all the files. Before deleting, the computer will ask “Are you sure”? Click “Y es” if it is confirmed. Otherwise, click “No”. 10. Click “Exit” ( ) to close the Ulead Instant View window.
20 CREA TING A SLIDE SHOW Y ou can create a slide show of Image files and Video files. 1. Launch the Ulead Photo Explorer 8.0. 2. Click on the icon. A rectangle window will appear in the bottom side of the screen. 3. Choose the picture/video clip that is to be used from the thumbnail view window and then click to add it to the Slide Show window .
21 5. Click the icon to prepare to record a Video Clip. A small window as below will appear . 6. Click on “Set Avi File” ( ) to assign file name. Note: If you press “Start” before assigning a file name, the message below will appear . Please assign file name.
22 USING THE ULEAD COOL 360 T ransforming a S eries of P hotos into a P anorama P icture 1. Double click the COOL 360 icon ( ) on your desktop to open the program. 2. Click the “New Project” icon ( ), the “New Project Wizard” will appear . 3. T ype in project name, and then click “Next”.
23 7. Click “Next”. 8. Click “ Finish ”. 9. Adjust the panorama with the control buttons on the right side of the screen. (fig. 1.7) 10. Click the “ Viewer ” icon ( ) to have a preview of the panorama picture. 1 1. Close the viewer window.
24 HOLDING VIDEO CONFERENCE 1. Connect the camera to your computer by using the supplied USB cable. 2. Launch “NetMeeting” by clicking on “Start > Program > Accessories > Communication > NetMeeting”.
25 TROUBLESHOOTING The troubleshooting guide is designed to help you solve common problems. If the problem encountered is not included in this section, please contact your local customer support hotline. SYMPTOM PROBLEM SOLUTION All the images I have taken do not appear .
26 SPECIFICA TIONS Image Resolution VGA (640 x 480 pixels), CMOS Sensor Lens F 2.8, f =5.0 mm Operating System Microsoft Windows 98 SE / ME / 2000 / XP White Balance Auto Exposure Control Auto Continu.
27 CLEANING AND MAINTENANCE Be sure to read this information to ensure that you use your camera correctly . Places to Avoid Do not store or use the camera in the following places or locations: • V ery humid, dirty or dusty places.
28 PRECAUTIONS T est Shots Always take a test photograph first to check that the camera is functioning normally . The liability for any incidental losses (such as the cost of photography or the loss of income from photography) incurred as a result of fault with this product cannot be accepted.
Visit Concord on the Internet www .concord-camera.com Concord Eye-Q VGA User’s Guide Copyright 2004 Concord Camera Corp. V ersion 2.0 515347-01 R1.
デバイスConcord Camera VGAの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Concord Camera VGAをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはConcord Camera VGAの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Concord Camera VGAの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Concord Camera VGAで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Concord Camera VGAを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はConcord Camera VGAの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Concord Camera VGAに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちConcord Camera VGAデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
