Cooper LightingメーカーRadioの使用説明書/サービス説明書
ページ先へ移動 of 21
WR 3M - Operating Instructions 1 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT Device Overview 1 Channel Selection LED Indicator 2 Heater Power LED Indicator 3 Vacuum “On” LED 4 L.
Page 2 of 21 WR 3M Table of Contents 1 Instructions 2 2 Cautions and Warnings 2,3 3 Packing List 3 4 Description 3,4 5 Initial Set-up 5 6 Operating Guidlines 6 7 Special Functions 8 8 Maintaining and .
WR 3M Page 3 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT Safety Information: z Always place the solderi ng iron in its original holder z Remove all inflammable objects from the proximity of the hot soldering tool. z Use suitable protective clothi ng to prevent the risk of burns associated with molten solder.
Page 4 of 21 WR 3M The desired temperature can be adjusted in the range of 150°F t o 999°F for hot-air tools and the WSP150 Soldering Iron; 150°F to 850°F for all other soldering / desoldering tools. Set and Read values are displayed in digital form.
WR 3M Page 5 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT The Weller WR 3M Rework Station offers the following additional features / functions: − Automatic tool detection and acti .
Page 6 of 21 WR 3M − can remotely control the unit and chart, store and print temper ature curves ("Monitor Software“). 5 Initial Set-up WARNING! • Risk of injury may occur i f vacuum hose is incorrectly connected to the air port (15).
WR 3M Page 7 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT − LED lit green constantly indicates that the connected tool is being heated up.
Page 8 of 21 WR 3M 2. Depress the UP or DOWN Scroll Key. The display switches to the set value. The temperature symbol (18) flashes. 3. Depress the UP or DOWN Scroll Key to set the desired temperature: - Tapping the Scroll Keys changes the Set temperature by one degree.
WR 3M Page 9 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT 2 s ➾ Menu 1 4 s ➾ Menu 2 1x ➾ ON/OFF 2. The current air flow in percent age is shown in the display for approximately 2 seconds. 3. Set the desired flow by Depressing the UP or DOWN Scroll Key.
Page 10 of 21 WR 3M 1. Select the desired channel ┌ 1 ┐ , ┌ 2 ┐ or ┌ 3 ┐ for entering the special functions. 2. Depress and hold down the UP and DOWN Scroll Keys simultaneously. "– 1 –“ appears in the display after 2 seconds. 3.
WR 3M Page 11 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT Setting the Automatic “Switch-Off” Time (AUTO-OFF) When the soldering tool is not i n use, heating of the soldering tool is switched off after the AUTO-OFF time has elapsed.
Page 12 of 21 WR 3M 1) Not in use = UP/DOWN Scroll Keys not depressed and no temperat ure drop > 41 °F. 2) STANDBY temperature must be below the Set temperature, otherwi se the SETBACK function is inactive. 3) When a switching holder is connec ted, the soldering tool alway s remains at the Set temperature outside the holder.
WR 3M Page 13 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT the airflow is activated as l ong as the push-button on the hot- air pencil is depressed. 1. Select the menu item HAP-On in Menu 1. 2. Set the time value with the UP or DOWN Scroll Key.
Page 14 of 21 WR 3M 2. Enter the 1, 2, or 3-digit LOCK code with the UP or DOWN Scroll Key. 3. Depress Radio Button ┌ 3 ┐ . The Station is now unlocked. Resetting the Special Functi ons to Factory Default Settings 1. Select the Special Functions Menu 1 .
WR 3M Page 15 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT requires a Station Identificati on (ID code) so that it can clea rly be identified. 1. Select the menu item REMOTE ID in Menu 2. 2. Enter an ID with the UP or DOWN Scroll Keys (possible values 0 – 999).
Page 16 of 21 WR 3M 2. Select the menu item FCC in Menu 2. 3. Depress the UP Scroll Key. Control point 842 °F / 450 °C is selected. The soldering tip is now heated to 842 °F / 450 °C. The Heater Control Indicator flashes ( a ) (21) as soon as the temperature is constant.
WR 3M Page 17 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT WARNING! Vacuum pump will be destr oyed if operated without the filter. Z Check to ensure the filters are in place before operating unit. Replacing the filter 1. Turn the cover cap for "Vac“ (14) or "Air“ (15) 45° counterclockwise and remove.
Page 18 of 21 WR 3M − Clean desoldering tool – replace filter − Check vacuum hose 10 Accessories 0052918399 WMRP Micro Soldering-tip set, 40 W; WDH 30T Stand, RT3 tip.
WR 3M Page 19 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT 0058761732 Desoldering set 18/15.5/12.5/10 with pick-up 0051512499 WDC Weller Dry Tip Cleaner 0051512599 WDC 2 Dry Tip Clea.
Page 20 of 21 WR 3M THE PERIOD OF ALL IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS, OR FITNESS FOR A PARTICULAR PURPOSE IS LIMIT ED TO 12 MONTHS FROM THE DATE OF PURCHASE BY THE USER.
WR 3M Page 21 of 21 EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT Apex, N.C. 27539 Tel: (919) 387-0099 Fax: (919) 387-2379 For inquiries concer ning Technical / Customer Service please call: (800) 476-3030 Ext.
デバイスCooper Lighting Radioの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Cooper Lighting Radioをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCooper Lighting Radioの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Cooper Lighting Radioの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Cooper Lighting Radioで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Cooper Lighting Radioを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCooper Lighting Radioの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Cooper Lighting Radioに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCooper Lighting Radioデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。