CurtisメーカーDVD50401の使用説明書/サービス説明書
ページ先へ移動 of 34
mp 3 IMPORTANT READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE. 5.1 ch output INSTR UCTION MANU AL.
.
Installation Warnings Ventilation slots and openings in the case are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not the blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or heat register.
CONTENTS INTRODUCTION SYSTEM CONNECTION GETTING STARTED FUNCTION BUTTONS ON SCREEN DISPLAY SETUP MENU TROUBLE SHOOTING About DVD About the player Front panel function Back panel function Remote contro.
THE REMOTE CONTROL 1 Loading batteries to the remote control Remove the battery compartment cover. Make sure that the batteries have been inserted in the correct polarities matching to the symbols +, - marked in the battery compartment. Close the battery compartment cover.
Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently , radically , from center Toward the outer Edge. Direct sunlight Heat or exhaust from a heating device. Extreme humidity Store discs in cabinet vertically , in dry condition.
3 INTRODUCTION About the player Back panel Front panel POWER STOP R/L OPEN/CLOSE PAUSE PLAY/ S-Video output Video output 2 3 6 10 Digital signal OPTICAL output jack 1 5.1CH OUT 12 4 Y Pb Pr 5 11 Digital signal COAXIAL output jack 13 2CH L input jack 14 2CH R input jack 5.
4 INTRODUCTION Remote control Notes The remote control transmits a directiona infrared beam. Be sure to aiml the remote control directly at the infrared sensor during operation. When the sensor is covered or there is a large object between the remote control and the sensor, the sensor cannot receive signals.
SYSTEM CONNECTION Preparations Accessories 1. Remote controller 2. Audio/Video cable 3. User's manual (check whether be fully equipped after open the box) Battery installation of remote controller Place two AAA(UM-4) in the battery compartment. Be sure the polarities are correct.
~110V 60Hz 7 6.
CONNECT THE DVD TO A TV USING THE Y/Pb/Pr JACKS. Use the COMPONENT Cable(not supplied) to connect DVD player to your TV. To use it, you must press P-SCAN button to switch the video mode to progressive scan or YUV.
CONNECTIONS CONNECT DVD PLA YER TO TV SET BY AV CABLE Connect the Composite video cable (supplied) to connect your unit and your TV. CONNECT DVD PLA YER TO TV SET BY S-VIDEO SOCKET Connect the S-VIDEO cable(not supplied) to connect DVD player and your TV.
GETTING STAR TED Play a disc Normally, when a MP3 disc is loaded, the unit will take longer time to download the initial data. DVD disc that does not match the region code cannot be executed by this player. Return to the disc main menu, press MENU button on the remote.
Video port setup The DVD player is equipped with the following video ports: Composite Video (V) (Always active) S-Video (Default option) The DVD player has been pre-set at the factory to Composite Video (V) and S-Video outputs, as default settings.
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
12 FUNCTION BUTTONS Play / Pause/ Stop Press PLAY button To play the Disc Then Press PAUSE button to pause. Press to resume normal playback. Press STOP button to stop in two modes: a) Press Once b) Press Twice 1 2 3 STOP memorizes the interrupt position.
The unit muted in SLOW mode 13 FUNCTION BUTTONS Search Forward / Backward Press to skip forward (chapters) Press to skip backward (chapters) 1 2 Skip Forward / Backward Slow Forward Player will not advance or reverse during "WARNING" section of any disc.
14 FUNCTION BUTTONS press cursor button to move between function items. Press to confirm a selection. Press to cancel an entry. Press to return to the previous menu. 1 2 Select an item in menu 3 4 In the disc menu or setup menu 2 1 4 Disc menu is a DVD disc feature, allowing users to select functions on screen.
15 FUNCTION BUTTONS Multi-Angle If a DVD disc contains Multi-Angle feature, viewing angles may be selected: 1 During in playback, repeat pressing ANGLE button to select the desired viewing angle Status will be displayed on screen.. A DVD disc may contain up to 9 selectable viewing angles.
16 FUNCTION BUTTONS In most cases, an Audio Soundtrack selection will be displayed on a DVD disc start up menu. Press CURSOR Button to select and ENTER button to confirm. If a DVD disc contains Multi-Audio Soundtrack feature, Audio Language can be selected: During in playback, repeat pressing AUDIO button to select the desired audio language.
FUNCTION BUTTONS 17 1 PSCAN First,You should press[STOP] Key STOP 2 Press [PSCAN]key you can select Progressive scan mode out, Repeat step , too can select normal mode out.
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
20 Repeat the section A-B 1 To repeat playback of a desired section: 1) Press the A-B button at the beginning of the desired section, "A". .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .. .. .. . .. .
20 FUNCTION BUTTONS ZOOM NOTE 2 1 The picture quality is degraded as the picture is increased. Press the ZOOM Button to enlarge viewable picture. Press the button repeatedly to change the zoom scale: Press the CURSOR buttons to adjust the zooming position.
21 FUNCTION BUTTONS 3D 1 ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......
PROG 22 FUNCTION BUTTONS P rogram to play a DVD, CD and MP3 disc in a desired sequence automatically,In "STOP"mode , . Program setting NOTE Some DVD discs do not allow programming. Single track disc cannot be programmed. DVD program menu 1 Load a DVD disc.
23 FUNCTION BUTTONS Return 1 In PBC mode , when pressing “RETURN” Key to return to the menu, thus canceling the PBC mode , the “RETURN” key will be invalid 2 1 RETURN Mark 1 STORING MARKS MEMORY 1.
OSD - DVD mode The OSD indicator is a user friendly interface designed for displaying the status of the playback. When a dif ferent disc is loaded (DVD, CD Or MP3), the OSD indicator bar will be different.
25 Disc T rack current track / total tracks Playback time Playing track file information (Information provided by the disc) MP3 mode Playing track highlight Selection highlight (Press ENTER button to play this track) Auto playback The player will load the MP3 disc and auto start to playback from track one till the last track of the root directory.
26 4:3 Letter Box Allow you to see movies in their original aspect ratio. Entire frame of the movie will be display on screen, but it will occupy a smaller portion of the screen. 4:3 Pan Scan The signal will fill the screen with the centre of the picture.
27 16:9 Wide Scr When you connect to a wide screen TV , this setting will allow the original aspect ratio will be display full screen. N O TE Depending on the DVD disc format, e.g. 2.35:1, the wide screen setting may still having black margins above and below the picture.
TROUBLE SHOOTING 28 Should your DVD player develop a problem, please check below before requesting service: Symptom Check and Action No Power Check if the power cord has been properly connected to the power outlet. Check if the main power has been switched on.
29 TROUBLE SHOOTING Symptom Check and Action Cannot SKIP or SEARCH Some discs are programmed that do not allow users to SKIP or SEARCH at some sections, especially at the beginning WARNING section.
30 SPECIFICA TIONS Type of Disc Audio Format Signal Output Frequency Response S/N radio THD DVD CD-DA CD-MP3 Kodak Picture CD CD-R / CD-RW MPEG 1, LAYER 1, LA YER 2 , LAYER 3 Audio System: Video Output: Audio Output: 2 Vpp CD: DVD: > 92 dB < 0.
デバイスCurtis DVD50401の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Curtis DVD50401をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCurtis DVD50401の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Curtis DVD50401の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Curtis DVD50401で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Curtis DVD50401を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCurtis DVD50401の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Curtis DVD50401に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCurtis DVD50401デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。