Aiphoneメーカー0207 AICの使用説明書/サービス説明書
ページ先へ移動 of 47
- 1 - 0207 AI C GH SERIES Apar tment Inter com System INSTALLATION &OPERATION MANUAL.
- 2 - General Prohibitions General Precautions Prohibition to Dismantle the Unit Prohibition on Subjecting the Unit to Water W ARNING (Negligence could result in death or serious injur y to people) 1. The unit must be installed and wired by a qualified technician.
- 4 - 1 SYSTEM CONFIGURA TION GH-D A/A + GH-SW GH-D A/A + GH-NS, GH-10K GH-V A + GH-D A/A + GH-SW GH-V A + GH-D A/A + GH-NS, GH-10K GH-BC GH-VBC 2 B A C 1 3 E D F 5 K J L 4 H G I 6 N M O 8 U T V 7 R Q P S Y X W Z 9 0 GH-MK Max.
- 5 - Standard System Configuration (1) Audio signal line (2) V ideo signal line (3) Power supply line a. Entrance station (For details, see 2-1 and 2-2) [1] Audio/video + digital name scrolling type .
- 3 - 1 SYSTEM CONFIGURA TION Standard System Configuration 4 Expanded System Configuration 6 W iring Distance 7 2 COMPONENTS Unit (Entrance Station) 8 Combination Examples for Entrance Station, Unit .
- 6 - GH-V A + GH-D A/A + GH-NS, GH-10K GH-MK Max. 8 (3 per trunk) Max. 2 GH-V A GH-V A GH-1KD / GH-4Z a e 1-2 #2 #3 #4 #2 #3 #4 (1) (2) (3) :A :V :P [1] 1 #1 #2 a e a e f GH-BC GH-BC 2 B A C 1 3 E D .
- 7 - 1-2 Expanded System Configuration Diagram 1. Common trunk line #1, 2 2. Sub trunk line #1 - 4 Sub trunk line #2 - #4 are the same as #1. Maximum 125 units per sub trunk line. (1) Audio signal line (2) V ideo signal line (3) Power supply line a. Entrance station (For details, see 2-1 and 2-2) b .
- 8 - 2 COMPONENTS 2-1 Unit (Entrance Station) [1] Speech module panel GH-DP [2] Speech module GH-D A/A [3] Camera module panel GF-VP [4] Camera module GH-V A [5] 1-call button panel GF-1P [6] 2-call .
- 9 - 2-2 2-3 Combination Examples for Entrance Station 1. Audio only . Direct selection (8 stations). 2. Audio/video. Direct selection (8 stations). 3.
- 10 - 2-5 Security Guard Station [1] Security guard station GH-MK [2] Mounting screws (enclosed with GH-MK) [3] RS-232C cable (enclosed with GH-MK) 2-4 Residential Station [1] Audio residential stati.
- 11 - Mounting the Entrance Station (1) [1] Back box [2] Joint pipe [3] Back box assembly dimensions [4] Special screwdri ver (enclosed with GH-BC) 1. Mounting the back box • Make a hole for the cable. • Use the joint pipe to assemble the back box.
- 12 - 3-2 3-3 Mounting the Entrance Station (3) 1. Example of interconnection of modules. 2. Use GF-C to connect to the name scrolling module. 3. T o position the speech module in the center row , run GF-C through the joint pipe in adv ance. Mounting the Entrance Station (2) 1.
- 13 - 3-4 Bus Control Unit and P ower Supply [1] Din rail (W -DIN11) [2] Screw hole [3] POWER switch [4] Power On LED (green) [5] Lock release lever [6] W all mounting screws (x2) 1. Mount GH-BC and GH-VBC to the Din rail. Click unit into place. ∗ T o remove GH-BC and GH-VBC, pull the lock release le ver do wn.
- 14 - 3-5 3-6 Residential Station [1] Mounting scre ws (x2) [2] Mounting bracket [3] 1-gang box or round back box [4] T erminal block (GH-1AD, GH-1KD) 1. Mount the mounting bracket on the 1-gang box. 2. Connect the wiring to the terminal block. 3. Mount the station unit to the mounting bracket.
- 15 - Security Guard Station (Desk-top Mounting Using GFW -S Stand) [1] Screws included with GFW -S (x4) [2] Cable tie included with GFW -S 1. Separate the mounting bracket and the protecti ve co ver from the back of the unit. 2. Mount the mounting bracket to GFW -S as shown in the drawing.
- 16 - 4 WIRING 1P Entrance #2 - #5 T r unk line #3 - #6 Door release Entrance station #1 1P(Audio) 1P(Video) 1P GH-BC GH-MK #1 GH-VBC 1Px2 T r unk line #1 T r unk line #2 1Px2 1P 1P 1Px2 1Px2 1Px2 1P.
- 17 - Light Orange Orange White Blue GH-4Z B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2 OUT 3 OUT 4 B1 B2 R1 R2 B1 B2 R1 R2 OUT 1 LINE OUT LINE IN OUT 2 B A GH-4Z B A B A 1Px2 1Px2 1Px.
- 18 - IN1 IN2 IN3 IN4 IN5 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 A1 A2 A1 A2 A1 A2 A1 A2 A1 A2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 + – GH-VBC IN1 IN2 IN3 IN4 IN5 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 A1 A2 A1 A2 A1.
- 19 - Standard System (2) Station-to-Station Wiring [1] Residential station GH-1KD, GH-1AD • There can be a maximum of 25 stations per trunk. • For the terminating residential station GH-1KD, set the setting switch (SW1) to "A".
- 20 - SW1 A B IN OUT R1 R2 R1 R2 C 0.65 10 9 CE K KE Do not remove the wires (For end users) 4-3 [2] [1] [5] GH-1KD GH-1KD GH-4Z GH-4Z d GH-VBC GH-BC b SW1 B A SW1 B A SW1 B A SW1 B A 1P NP 1P NP 1P .
- 21 - 4-3 Standard System (3) Homerun Wiring [1] 4-way video junction unit GH-4Z • For the terminating GH-4Z (maximum of 6 units per trunk), set the setting switch (SW1) to "A". [2] Residential station GH-1KD, GH-1AD, GH-1MD • For GH-1KD, set the setting switch (SW1) to "A".
- 22 - 1P 1P(Audio) 1P(Video) 1P GH-BC GH-BC GH-BC GH-VBC 1P 1P 1P Distribution point Distribution point Distribution point 1Px2x5 1Px2 1Px2 1Px2 GH-MK #2 GH-MK #2 GH-NS #2 , #3 GH-NS #4 - #6 GH-NS #7.
- 23 - AC GH-NS #2 , #3 GH-MK #2 + - ELB ELC ELM + RY RY - CN2 CN1 GH-D A/A GH-NS GH-10K GH-V A CN3 CN100 Entrance station #1 CN1 CN3 GH-MK #1 - C CE + - AC 1Px2 B1 B2 B1 B2 B1 B2 OUT1 IN1 A1 A2 IN2 A.
- 24 - 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP A1 A2 PS-2410LC PS-2410LD PS-2410DIN AC AC .
- 25 - Expanded System 1. Common trunk line: maximum of 2 trunk lines 2. Sub trunk line: maximum of 4 trunk lines Maximum of 125 units (maximum of 48 units for standard system) • The wiring of the sub trunk line is the same as the standard system. For details, see 4-1 to 4-3.
- 26 - 6-1 Entrance Station 1. Digital name scrolling entrance station • Camera module GH-V A [1] Camera • Speech module GH-D A/A [2] Speaker [3] In Use LED [4] Microphone • Digital name scrolli.
- 27 - 6-2 Residential station (GH-1MD) [1] V ideo monitor 4 inch black and white CR T [2] Microphone [3] Speaker [4] Light button / Security guard station call b utton [5] Door release / Monitor butt.
- 28 - 8-1 Adjusting the Camera Angle 1. V iew from the initial camera position 2. Changing the camera angle • Remov e the rubber cap. Mov e the lev er to the desired position.
- 29 - 8-3 Making Adjustments with the Mounting Gauge [1] Mounting gauge • T o mount multiple rows of panels, apply the mounting gauge to the mounting bracket. While using the mounting gauge to make adjustments, tighten the scre ws. ∗ There is a mounting gauge for the built-in back box of GF-2B and GF-3B.
- 30 - Setting up the System 1. Make sure that all units are installed and wired properly . T urn on the power switch in GH-BC. When the system includes GH- NS, program the resident information (names and room numbers) in adv ance. (For details, see 8-5) 2.
- 31 - 8-5 Programming (GH-NS) a. Programming with a PC • Y ou can use a PC to enter data and write in or change resident names. • Use the connection cable that comes with GH-NS to connect your PC to GH-NS. • In your PC, install the setup tool program from the CD that comes with the GH-BC.
- 32 - 8-6 4 5 6 1 2 3 7 8 ENGLISH FRANCAIS DEUTSCH ESPANOL NEDERLANDS SELECT LANGUAGE ENGLISH Y OUR OPERA TION DISPLA Y MENU Menu 2 SELECT LANGUAGE DECIDE & BA CK FORW ARD Scroll BACKW ARD DECIDE & NEXT Max. 20 (01)~(20) programmab le ACCESS CODE ACCESS CODE (01) ID 01 (4-digit) ACCESS CODE (02) 8910 Enter a code.
- 33 - 8-6 Program Mode (GH-NS) 1. Menu 1: Select language Choose language to be displayed on GH-NS. 2. Menu 2: Change ID code Enter new ID code starting with " ∗ ", then 4-digit number . (Example: ∗ 1234) 3. Menu 3: Set access code Enter new 4-digit Access Code.
- 34 - 9 SETTING UP (SECURITY GU ARD ST A TION) GH-MK Enter Program Mode Select Menu & Quit 2 B A C 1 3 E D F 5 K J L 4 H G I 6 N M O 8 U T V 7 R Q P S Y X W Z 9 0 2 B A C 1 3 E D F 5 K J L 4 H G .
- 35 - 9-1 Programming (GH-MK) • Make sure that all units are installed and wired properly . T urn on the po wer switch to GH-BC. Program the resident information (names and room numbers) in advance. a. Programming with a PC • Y ou can use a PC to enter data and write in or change resident names.
- 36 - 4 1 2 3 ENGLISH FRANCAIS DEUTSCH ESPANOL NEDERLANDS SELECT LANGUAGE ENGLISH Y OUR OPERA TION DISPLA Y MENU Menu 2 SELECT LANGUAGE DECIDE & BA CK FORW ARD Scroll BACKW ARD DECIDE & NEXT .
- 37 - 9-2 Program Mode (GH-MK) 1. Menu 1: Select language Choose language to be displayed on GH-MK. 2. Menu 2: Change ID code Enter new ID code starting with " ∗ ", then 4-digit number . (Example: ∗ 1234) 3. Menu 3: Write in resident information Register room #s and resident names.
- 38 - 10 OPERA TIONS (ENTRANCE ST A TION) 10-1 Calling a Residential Station 1. Direct Selection GH-SW • Press the call button for the residence that you w ant to call. Y ou will hear a lo w-volume call tone from the entrance station. 2. Digital name scrolling GH-NS • Display the resident name you want to call and press the call button.
- 39 - 10-2 10-3 Calling the Security Guard Station Press the call button once. Y ou will hear a low-v olume call tone from the entrance station. Door Release 1. Enter the access code. (8-6, Menu 3) 2. The door release will be acti vated at the entrance station.
- 40 - 11-3 11-4 Door Release 1. Press the door release button while in communication. 2. The door release function will acti vate on the entrance station that is in communication. ∗ Depending on the electric door release system that you use, the door release may be activ e only while the door release b utton is pressed.
- 41 - 11-7 Emergency Alarm 1. Press and lock the emergenc y alarm switch (or when there is a line - off trouble). 2. An alarm will sound from the residential station. 3. When there is a call from the security guard station, the alarm will change to a standard call tone and sound for approximately 45 seconds.
- 42 - 12-1 12-2 Replying to a Call fr om an Entrance Station 1. When a call is recei ved from an entrance station, a call tone will sound for approximately 10 seconds at the security guard station and the entrance station number will be displayed. Lift the handset and respond.
- 43 - 12-3 12-4 Calling an Entrance Station 1. Lift the handset and press the ∗ button and 1 b utton. 2. Use the 10 key to select the desired entrance station. W ith Expanded System, entering Entrance station's unit ID# is different by COMMON lines' connection between Entrance stations and Security guard stations.
- 44 - d. Making a call by ID# Lift the handset and press the " ∗ " button and "1" b utton. Press the "0" button, the security guard station ID (1 -4) b utton and then the call button. Y ou will hear a low-v olume call tone from the handset.
- 45 - 12-8 12-7 Reception mode Setting While in standby mode, press " ∗ ", "1" and " ∗ " on a security guard station to display "RECEPTION MODE". In this mode, you can intercept a call from an entrance to a tenant, and transfer the calls directly to the security guard station.
- 46 - T echnical precautions • Operating temperature: Entrance Station: -10 ° C to 60 ° C (14 ° F to 140 ° F) Residential Station: 0 ° C to 40 ° C (32 ° F to 104 ° F) Security Guard Station.
- 47 - AIPHONE CO., LTD., NAGOYA, JAPAN AIPHONE CORPORATION, BELLEVUE, WA, USA AIPHONE S.A.S., LISSES-EVRY, FRANCE http://www.aiphone.com/ This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P art 15 of the FCC Rules.
デバイスAiphone 0207 AICの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Aiphone 0207 AICをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAiphone 0207 AICの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Aiphone 0207 AICの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Aiphone 0207 AICで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Aiphone 0207 AICを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAiphone 0207 AICの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Aiphone 0207 AICに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAiphone 0207 AICデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
