D-LinkメーカーDFE-680TXDの使用説明書/サービス説明書
ページ先へ移動 of 44
DFE - 680TXD Fast Ethernet PC card for CardBus User’s Guide Rev. 01 (March, 2001) RECYCLABLE Printed in Taiwan.
CONTENTS Introduction ................................................................................................ ......................... 1 General Description ....................................................................................
1 Introduction Thank you for choosing D - Link DFE - 680TXD, the value leader a mong Ethernet / Fast Ethernet adapters for CardBus notebook PCs. This chapter provides a general description of DFE - 680TXD features, with a summary of features at the end of the chapter.
2 speed and duplex ,and for transmit ting and receiving data and carrier detection. About Fast Ethernet Fast Ethernet is a network technology specified by IEEE Standard 802.3u. It extends the traditional 10Mbps (10 megabit/sec) Ethernet technology to achieve 100Mbps (100 megabit/sec) transmis sion and reception.
3 best baud rate, compression method, and error correction method. When the two modems have tested the phone - line qual ity and have switched to the combination of parameters which will provide the b.
4 LED Indicators The direct port features six LED indicators: 10/100 Indicator: Solid LE D clearly indicates when you are connected to a Fast Ethernet Network. Half /Full Indicator: Steady green indicates Full - Duplex selected. Dark indicates Half - Duplex selected.
5 • Autonegotiation per IEEE 802.3u specification • No manual setup switches –– fully automatic configuration • Power consumption 2 watts (max.) • Laser - welded stainless steel c ase • Software support: Diagnostic Program NetWare DOS ODI NetWare Lite Personal NetWare Windows 95 OSR2 Windows NT 3.
6 Hardware Installation Unpack and Inspect NOTE: Under ordinary circumstances, the DFE - 680TXD will not be affected by static charge as may be received through your body during handling of the unit.
7 Step 1: Insert the DFE - 680TXD Under the PC Card standard and the corresponding Japanese JEIDA standard, PC Cards may safely be "hot swapped" –– it is not necessary to switch the computer's power off before installing or removing the DFE - 680TXD, or any other PC Card.
8 Step 2: Connect to the Network Medium Make the network connection by running a UTP cable from the supporting switch or hub to your direct p ort. Simply plug one end (RJ - 45 plug) of the cable into an available port of the switch or hub, and plug the other end (RJ - 45 plug) into the RJ - 45 socket of your direct port coupler.
9 Ln/Act indicator will remain dark until the software p rocessing is completed. Connect the Network Cable Category 5 UTP cable is good enough to qualify under both the Fast Ethernet cabling rules and the traditional Ethernet cabling rules. The maximum individual cable run between any station and its supporting hub or switch is 100m.
10 Software Installation Windows2000 driver install Figure1 - Insert DFE - 680TXD into notebook, new hardware device should prompt. Select Next ..
11 Figure2 - Select Next to continue installation..
12 Figure3 - Ensure that the Specify location box is checked and click Next.
13 Figure4 - Click Next to continue.
14 Figure5 - The Digital Signature Not Found window appears. Click Yes to continue..
15 Figure6 - Click Finish to complete the DFE - 680 TXD Ethernet Card installation..
16 Device Manager for proper installation for Win2000 Figure7 - Click the Start button > Settings > Control Panel >Then Double Click the System icon and the Systems Properties should appear.
17 Figure8 - Sele ct Hardware and then click the Device Manager button Figure9 - The Device Manager menu. Double click on the Network Adapters and the.
18 D - Link DFE - 680TXD CardBus should appear showing proper installation..
19 Windows ME driver installation Fig ure1 - Insert the DFE - 680TXD into available PCMCIA slot. Windows should detect Card. The Add New Hardware windows appears, select Next.
20 Figure2 - Ente r CD - ROM drive letter or click on the Browse button and highlight the CD - ROM drive under Drivers . Then Cl ick Next to continue the installation.
21 Figure3 - A screen appears telling you that is has located the DFE - 680TXD driver in the CD - ROM drive. Then click Next , Windows will copy files to the hard drive.
22 Figure4 - Click Finish to complete driver installation..
23 Figure5 - Click the start button > Settings > Control Panel > Click the System button > Device Manager > Network Adapters. And D - Link DFE - 680TXD CardBus should appear showing proper installation.
24 Windows 98 Driver install Figure 1 - Select Next..
25 Figure2 - Select Next.
26 Figure3 - Enter CD - ROM drive, or click on the Browse button and select CD - ROM drive..
27 Figure4 - Driver file name, select Next. Figure5 - Insert 98 CD - ROM then click on OK button..
28 Figure6 - Enter CD - ROM drive, then type D: Win98 in the box. (Some computers will have the Windows 98 files available in the C: Windows options cabs directory.
29 Figure7 - Finish.
30 Fig ure8 - Click the Start button > Setting > Control Panel > Click the System button > Device Manager > Network Adapters . Device Manager will display of proper installation of adapter.
31 Troubleshooting Troubleshooting the Hardware Installation If you experi ence any problems with the hardware installation, first ascertain that all network cable connections are firm, that the prope.
32 Adapter” read the explanation of the problem. This information will be helpful if you require techni cal support from D - Link. Verify Cable Connections Check to see that the computer(s) you are troubleshooting are properly connected. Each computer must be connected from its DFE - 680TXD with a Category 5 cables.
33 Understanding Indicators Your DFE - 680TXD has indicators or lights that can give you information about your network traffic and help you d etermine problems when troubleshooting. Your DFE - 680TXD has two indicators label “ACT” and “LINK” on their back panels.
34 Pinging your DFE - 680TXD Card Follow these steps to Ping a device: Ping is the acronym for Packet Internet Groper (PING), a utility to determine if a specific IP address is accessible. It works by sending a packet to the specified address and waiting for a reply.
35 Specifications Network Type: Ethernet 100Base - TX Ethernet IEEE 802.3u standard for 100Mbps baseband CSMA/CD local area network Ethernet 10BASE - T Ethernet IEEE 802.
36 Device Drivers* • Diagnostic Program • NetWare Lite • Pers onal NetWare • NetWare DOS ODI • Windows 95 OSR2 • Windows 98 • Windows 98 SE • Windows ME • Windows 2000 • Windows NT 3.
i FCC Certifications This equipment ha s been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ii LIMITED WARRANTY D - Link Systems, Inc.(“D - LINK”) provides this limited warranty for its product only to the person or entity who originally purchased the product from D - Link or its authorized reseller or distributor.
iii substantially conform to D - Link’s then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original delivery of the Software for .
iv non - conforming. What Is Not Covered: This limited warranty provided by D - Li nk does not cover : Products that have been subjected to abuse, accident, alteration, modification, tampering, neglig.
v Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty p rovides specific legal rights and the product owner may also have other rights which vary from state to state.
Offices AUSTRALIA D - LINK AUSTRALASIA Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069, Australia TEL: 61 - 2 - 9417 - 7100 FA X: 61 - 2 - 9417 - 1077 TOLL FREE: 1800 - 177 - 100 (Australia), 0800 - 900900 (New Zealand) URL: www.dlink.com.au E - MAIL: support@dlink.
デバイスD-Link DFE-680TXDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DFE-680TXDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DFE-680TXDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DFE-680TXDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DFE-680TXDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DFE-680TXDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DFE-680TXDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DFE-680TXDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DFE-680TXDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
