D-LinkメーカーDGS-1005Gの使用説明書/サービス説明書
ページ先へ移動 of 28
.
ENGLISH 2 D-Link res erves the right to revise this public ation and to make chang es in the con ten t hereo f without obligat ion to noti fy any person or org aniza tion of such revisions or changes .
ENGLISH 3 T able of C ont ents Prefac e ............................................................................................. 2 Manual Revisions .......................................................................................... 2 T rademarks .
ENGLISH 4 T o reduce the risk of bodily injury , elec trical shock , re, and damage t o the equipment, obser ve the following pr ecautions. Obser ve and f ollow ser vice mark ings. D o not service an y pr oduct ex cept as explained in your system documentation.
ENGLISH 5 • T ohelpav oiddamagingyoursy stem,besurethev oltageselec tionswitch(ifprovided) on the power supply is set t o match the pow er available at your.
ENGLISH 6 Static elec tricity can har m delicate components inside your system. T o prevent static damage, discharge static elec tricity from your body before you touch any of the electronic components, such as the microprocessor . Y ou can do so by periodically touching an unpainted metal sur face on the chassis.
ENGLISH 7 P roduc t O ver view Setup The setup of the DGS-1005G can be per formed using the follo wing steps: • Thepow eroutletshouldbewithin1.
ENGLISH 8 F ast Ethernet T echnology The growing impor tance of LANs and the increasing complexity of desktop computing applications ar e fueling the need for high per formance networks.
ENGLISH 9 Swit ching T echnology Switches provide full-line speed and dedicated bandwidth for all connec tions. This is in contrast to hubs, which use the traditional shared networking topology , where the connected nodes contend for the same network bandwidth.
ENGLISH 10 F eatur es The DGS-1005G 5-por t 10/100/1000BASE- T Gigabit Ethernet Switch was designed for easy installation and high per formance in an environmen t where trac on the network and the number of users incr ease continuously .
ENGLISH 11 Har dwar e O ver view T op P anel (LEDs) The LED indica tors of the Switch include Po wer and Speed/Link/ Act. The follo wing shows the LED indicat ors for the Switch along with an explanatio n of each indicator (ref er to the next page).
ENGLISH 12 P ower Indicator This gr een indicator illuminat es when the Switch is r eceiving pow er . Link/Act/Speed This indicator illuminates steadily when a por t is connected to a device successfully and has a good link. The indicator will blink to indicate that a por t is transmitting or receiving da ta on the network.
ENGLISH 13 Auto MDI/MDI- X Ports: F ive (5) Gigabit Ethernet, Auto-Negotiating por ts (10/100/1000Mbps) Comprehens ive LED indicators display the conditions of the Switch and status of the network. P ower Jack: P ower is supplied through an external power adapt er .
ENGLISH 14 Installation This section will explain how to connect Ethernet devices to y our new D-Link switch and how to mount the switch. Befor e Y ou C onnec t to the Network Thesitewher eyouinstalltheSwit chmaygreatlya ectitsper formance .
ENGLISH 15 Mounting the S witch on the W all The DGS-1005G can also be mounted on a wall. T wo mounting slots are provided on the bottom of the switch for this purpose. Please make sure that the front panel is e xposed in order to view the LEDs . Please refer to the illustra tion below: Mounting on a cement w all 1.
ENGLISH 16 C onnec ting the Swit ch DGS-1005G to End Node End nodes include PCs outtted with a 10, 100, or 1000Mbps RJ-45 Ethernet Net work Interface Card (NIC ) and most rout ers. An end node can be connec ted to the Switch via a t wisted-pair Category 3, 4, 5, or 5e UTP/STP cable.
ENGLISH 17 T roubleshooting 1. Wh y can´t I share my Internet c onnection to multiple computers when using m y D-Link switch? Ifyouar econnectingdirectlytoa CableorDSL.
ENGLISH 18 Networking B asics Check y our IP address After you install your new D -Link adapter or if you already have an Ethernet adapter installed on your computer , by default, the T CP/IP settings should be set to obtain an IP address fr om a DHCP ser ver (i.
ENGLISH 19 Sta tically Assign an IP addr ess If you are not using a DHCP capable gatew ay/rout er , or you need to assign a static IP addr ess, please follow the steps belo w : Step 1 W indows® 7 - Click on Start > Contr ol Panel > Network and Int ernet > Network and Sharing C enter > Change A dapter Setting .
ENGLISH 20 Glossar y 1000BASE-LX A shor t laser wavelength on multimode ber optic cable f or a maximum length of 550 meters. 1000BASE-SX Alongwav elengthfora “longhaul” beropticcableforamaximumlengthof10kilometers.
ENGLISH 21 Bandwidth Information capacit y , measured in bits per second, that a channel can transmit. The bandwidth of Ethernet is 10Mbps, the bandwidth of F ast Ethernet is 100Mbps. Baud Rate The switching speed of a line . Also k nown as line speed.
ENGLISH 22 F ast Ethernet 100Mbps technology based on the Ethernet/CD network access method . Flo w Con trol – (IEEE 802.3x) A means of holding packets back at the transmit port of the connec ted end station. P revents packet loss at a congest ed switch port.
ENGLISH 23 MDI-X Medium Dependent Inter face Cross-over . An Ethernet por t connection where the internal transmit and receiv e lines are crossed. MIB Management Information Base.
ENGLISH 24 Spanning T ree P rotoc ol – (STP) A br idge -based system for providing fault tolerance on networks. STP works by allowing you to implement parallel paths for network trac, and to ensure that r edundant paths are disabled when the main paths are oper ational and enabled if the main paths fail.
ENGLISH 25 Standards • IEEE802.310BASE- TEthernet • IEEE802.3u100BASE- T XF astEthernet • IEEE802.3ab1000BASE- TGigabitEthernet • IEEE802.
ENGLISH 26 RJ-45 Pin Specica tions The follo wing table shows the standard RJ-45 rec eptacle/connector and their pin assignments. RJ-45 Connector pin assignment Contact Media Direct Inter face Sign.
ENGLISH 27 C ontac ting T echnical Suppor t U .S. and Canadian customers can contact D -Link technical support through our web site or by phone . Before y ou contact technical suppor t, please have the follo wing ready : • Modelnumberoftheproduct(e.
ENGLISH 28 Pr oduc t registration is entir ely voluntar y and failure to complet e or return this form will not diminish y our warranty r ights. Registr ation V ersion 1.
デバイスD-Link DGS-1005Gの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DGS-1005Gをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DGS-1005Gの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DGS-1005Gの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DGS-1005Gで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DGS-1005Gを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DGS-1005Gの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DGS-1005Gに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DGS-1005Gデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
