D-LinkメーカーDWA-610の使用説明書/サービス説明書
ページ先へ移動 of 63
.
2 D-Link DWA-610 User Manual T able of Contents Product Over view ................................................... 3 Package Contents .............................................................. 3 System Requirements .............................
3 D-Link DWA-610 User Manual Section 1 - Product Overview • D-Link DW A-610 Notebook Adapter • Manual and W arranty on CD • D-Link Wireless Utility on CD System Requirements • A laptop computer with an available 32-bit cardbus slot • Windows ® 98SE/ME/2000/XP or Vista • 300MHz processor and at least 64MB of RAM • An 80 2.
4 D-Link DWA-610 User Manual Section 1 - Product Overview Introduction The D-Link Wireless G DW A-610 Notebook Adapter is a wireless laptop adapter featuring the ver y latest in advanced wireless silicon chip technology including enhanced security to shield and protect your wireless communication from intruders.
5 D-Link DWA-610 User Manual Section 1 - Product Overview • Faster Wireless Networking - Faster data transfers mean increased productivity . With the DWA-610 in your laptop PC, you will have the exibility of wireless networking speeds that save you time and money .
6 D-Link DWA-610 User Manual Section 1 - Product Overview ACT A blinking light indicates data is being transmitted. Link A steady light indicates a connection to a wireless network.
7 D-Link DWA-610 User Manual Section 2 - Installation Getting Started Installation This section will walk you through the installation process. If you have a built-in wireless adapter , please disable it in device manager before installing your D-Link adapter .
8 D-Link DWA-610 User Manual Section 2 - Installation Disable Other Wireless Adapters Most newer laptops may include a built-in wireless adapter . T o prevent any conicts or confusion with the D-Link wireless adapter , it is recommended to disable the wireless adapter (as well as any unused Ethernet adapters).
9 D-Link DWA-610 User Manual Section 2 - Installation Click Y es to disable the adapter . The adapter is now disabled. When disabled, a red X will be displayed. Disabling the adapter will not remove the drivers. If you would like to use the adapter , simply right-click it and select Enable .
10 D-Link DWA-610 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless adapter lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network.
11 D-Link DWA-610 User Manual Section 2 - Installation W arning: Do NOT install the DWA-610 Notebook Adapter into your computer before installing the driver software from the D-Link CD. T urn on the computer and Insert the D-Link DW A-610 Driver CD in the CD-ROM drive.
12 D-Link DWA-610 User Manual Section 2 - Installation The InstallShield Wizard window will appear . Click Next to continue. By default setup will install to the default location: C:Program Files Wireless G DW A-610 , where C: represents the drive letter of your hard drive.
13 D-Link DWA-610 User Manual Section 2 - Installation Insert the adapter into an available Cardbus slot on your computer . If the Found New Hardware Wizard appears, click Cancel . Click Next to continue. Enter the network name (SSID) manually . If you enter the SSID incorrectly , you will automatically be brought to the site sur vey page.
14 D-Link DWA-610 User Manual Section 2 - Installation Click the Scan button to display a list of wireless networks (site survey). Click on the network name (SSID) and click Next . If the wireless network you are trying to connect to is encrypted, enter the WEP key or WP A-PSK or WP A2-PSK passphrase.
15 D-Link DWA-610 User Manual Section 2 - Installation If you want to connect to your network with WPS, select the option. And then click Next . Click Press to connect to your wireless network.
16 D-Link DWA-610 User Manual Section 2 - Installation Connection Established And Click “ Next ”. Click “ Finish ” to complete installation. DWA-610 DWA-610 DWA-610.
17 D-Link DWA-610 User Manual Section 3 - Configuration If you encounter failure of WPS, below page will show . Click Retr y to re-connect to your wireless network with WPS. Click Next to select the way you want to get connected to your wireless network.
18 D-Link DWA-610 User Manual Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless adapter using the D-Link Utility as well as the Windows ®.
19 D-Link DWA-610 User Manual Section 3 - Configuration Wireless Networks The SSID (Ser vice Set Identier) is the name of the wireless network. Displays the MAC address of the wireless device. D i s p l a y s t h e L i n k Q u a l i t y o f t h e w i r e l e s s connection.
20 D-Link DWA-610 User Manual Section 3 - Configuration D-LinkWi-FiProtectedSetup “Push Button Conguration” is a virtual button on the utility that can be pressed to get connected to your wireless network. Please make sure the access point is nearby and its physical button is placed on your access point.
21 D-Link DWA-610 User Manual Section 3 - Configuration My Wireless Networks The My Wireless Networks page will allow you to create, edit, and delete wireless network proles. Ever y time you connect to a network using the Wireless Networks page, a prole will automatically be created.
22 D-Link DWA-610 User Manual Section 3 - Configuration Add Profile Y ou may add a new network by clicking the New button from the My Wireless Networks page. Profile Name: SSID: Ent er a na me f or your pr o le (e .g . Home, O fc e, Coffee Shop).
23 D-Link DWA-610 User Manual Section 3 - Configuration Modify Profile Y ou may edit an existing profile by clicking the Modify button from the My Wireless Networks page. Profile Name: SSID: Ent er a name fo r y our pr ol e ( e.g . H ome , O fc e, Coffee Shop).
24 D-Link DWA-610 User Manual Section 3 - Configuration Support If you need help, click the Support button. A pane will appear to the right of the utility which will display information about the utility .
25 D-Link DWA-610 User Manual Section 3 - Configuration Th e A bo ut sc re en gi ve s y ou i nfo rm at ion a bo ut t h e F ir mw ar e and Utility V ersions of the DWA-610.
26 D-Link DWA-610 User Manual Section 3 - Configuration Connect to a Wireless Network Using Windows ® Vista ™ Windows ® Vista ™ users may use the built-in wireless utility. If you are using another company’s utility or Windows ® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network.
27 D-Link DWA-610 User Manual Section 3 - Configuration Enter the same security key or passphrase that is on your router and click Connect. It m ay tak e 20- 30 sec onds t o con nect t o the wire less networ k. If t he c onnect ion f ails, p lease verif y tha t the security settings are correct.
28 D-Link DWA-610 User Manual Section 3 - Configuration Connect to a Wireless Network Using Windows ® XP Windows ® XP / Vista users may use the built-in wireless utility . The following instructions are for Windows XP Service Pack 2 users. If you are using Windows ® 2000, you must use the D-Link utility .
29 D-Link DWA-610 User Manual Section 3 - Configuration Disabling The Windows ® XP Utility If you want to use the D-Link wireless utility you must disable the Windows XP wireless utility . R i g h t - c l i ck o n t h e w i r e l es s c o m p ut e r i c on i n y o ur s y s t em t r a y (lower -right corner next to the time).
30 D-Link DWA-610 User Manual Section 3 - Configuration In the Wireless Network Connection Properties window , uncheck Use Windows ® to configure my wireless network settings a nd then click OK .
31 D-Link DWA-610 User Manual Section 4 - Wireless Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders.
32 D-Link DWA-610 User Manual Section 4 - Wireless Security What is WP A? WP A, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP: • Improved data encryption through the T emporal Key Integrity Protocol (TKIP).
33 D-Link DWA-610 User Manual Section 4 - Wireless Security Configure WEP Using the D-Link Wireless Connection Manager It is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter . If you are joining an existing network, you will need to know the WEP key being used.
34 D-Link DWA-610 User Manual Section 4 - Wireless Security It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter . make sure you enter the WEP key exactly the same on all wireless devices. It is strongly recommended to set the authentication to Shared Key .
35 D-Link DWA-610 User Manual Section 3 - Configuration Configure WEP Using Windows ® Vista It is recommended to enable wireless security (WEP) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
36 D-Link DWA-610 User Manual Section 3 - Configuration 3. E n t e r t h e s a m e W E P k e y t h a t i s o n y o u r r o u t e r a n d c l i c k Connect . It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct.
37 D-Link DWA-610 User Manual Section 4 - Wireless Security Configure WEP Using the Windows ® XP Utility It is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter . If you are joining an existing network, you will need to know the WEP key being used.
38 D-Link DWA-610 User Manual Section 4 - Wireless Security 3. The Wireless Network Connection box will appear . Enter the WEP key and click Connect . It m ay t ake 20- 30 s econ ds t o co nnec t t o th e wi rele ss n etwo rk. If the con nect ion fails, please verify that the WEP settings are correct.
39 D-Link DWA-610 User Manual Section 4 - Wireless Security CongureWP A/WP A2Passphrase Using the D-Link Wireless Connection Manager It is recommended to enable WP A-PSK on your wireless router or access point before configuring your wireless adapter .
40 D-Link DWA-610 User Manual Section 4 - Wireless Security It is recommended to enable WP A-PSK on your wireless router or access point before configuring your wireless adapter . Make sure you enter the passphrase exactly the same on all wireless devices.
41 D-Link DWA-610 User Manual Section 3 - Configuration CongureWP A/WP A2Passphrase Using Windows ® Vista It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wirele ss adapte r.
42 D-Link DWA-610 User Manual Section 3 - Configuration 3. Enter the same WPA/WPA2 passphras e that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct.
43 D-Link DWA-610 User Manual Section 4 - Wireless Security CongureWP A/WP A2Passphrase Using the Windows ® XP Utility It is recommended to enable WP A-PSK on your wireless router or access point before configuring your wireless adapter . If you are joining an existing network, you will need to know the WP A-PSK key being used.
44 D-Link DWA-610 User Manual Section 4 - Wireless Security 3. The Wireless Network Connection box will appear . Enter the WP A/WP A2 passphrase and click Connect . It m ay t ake 20- 30 s econ ds t o co nnec t t o th e wi rele ss n etwo rk. If the con nect ion fai ls, pleas e veri fy tha t the WP A-PS K sett ing s are cor rec t.
45 D-Link DWA-610 User Manual Section 4 - Wireless Security CongureWP A/WP A2 Using the D-Link Wireless Connection Manager WP A and WP A2 are for advanced users who are familiar with using a RADIUS ser ver and setting up certificates.
46 D-Link DWA-610 User Manual Section 4 - Wireless Security Congure802.1x Using the D-Link Utility 802.1x is for advanced users who are familiar with using a RADIUS server and setting up certificates. 1. Open the Wireless Utility by double-clicking on the D-Link icon in your system tray (lower -right corner of screen).
47 D-Link DWA-610 User Manual Section 4 - Wireless Security How to configure DW A-610 connection with PSP X-link via Windows Zero Configuration 2. Then click the Configure button to continue. 1. Righ t- cli ck th e i co n o f D W A- 61 0 W ir ele ss Ne two rk Co nn ect io n.
48 D-Link DWA-610 User Manual Section 4 - Wireless Security 4. Then select the item of property “PSP Xlink Mode” and set value to be “ Enable ”. And then click “ ok ”. 3 .Select tab “ Advanced ”. Select the item of property “Network T ype” and set value to be “802.
49 D-Link DWA-610 User Manual Section 4 - Wireless Security 5. Select the tab Wireless Networks and click the Advanced button to continue. 6. In the list of Networks to access , select Computer -to-co.
50 D-Link DWA-610 User Manual Section 4 - Wireless Security 7. Click Refresh network list . Check the list of available wireless networks, and select the SSID of your PSP device and click to connect with it.
51 D-Link DWA-610 User Manual Section 5 - T roubleshooting 1. How do I know if my adapter is installed properly? Select the Hardware T ab. T roubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWA-610.
52 D-Link DWA-610 User Manual Section 5 - T roubleshooting Click the + sign next to Network Adapters. Right-click on D-Link DW A-610 Wireless Notebook Adapter . Select Properties to check that the drivers are installed properly . Look under Device Status to check that the device is working properly .
53 D-Link DWA-610 User Manual Section 5 - T roubleshooting Make sure that the DW A-610 Wireless Adapter is properly seated in the computer’ s Cardbus slot. If Windows does not detect the hardware upon insertion of the adapter , make sure to completely remove drivers that were previously loaded.
54 D-Link DWA-610 User Manual Section 5 - T roubleshooting click on Configuration to change the settings for the wireless adapter . If Security is enabled, make sure that the correct encr yption keys are entered on both the DWA-610 and the access point.
55 D-Link DWA-610 User Manual Appendix A - Wireless Basics D-Link wireless products are based on industr y standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks.
56 D-Link DWA-610 User Manual Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly , so you have the freedom to connect computers anywhere in your home or ofce network.
57 D-Link DWA-610 User Manual Appendix A - Wireless Basics Wireless Personal Area Network (WP AN) Bluetooth is the industr y standard wireless technology used for WP AN.
58 D-Link DWA-610 User Manual Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding ever ywhere not just at home or ofce. People like the freedom of mobility and it’ s becoming so popular that more and more public facilities now provide wireless access to attract people.
59 D-Link DWA-610 User Manual Appendix A - Wireless Basics Security Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WP A or WEP security feature on the router . Refer to product manual for detail information on how to set it up.
60 D-Link DWA-610 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter , by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically .
61 D-Link DWA-610 User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router , or you need to assign a static IP address, please follow the steps below: Step 1 Windows ® Vista - Click on Start > Control Panel > Network Sharing Canter > Manage Wireless Connections .
62 D-Link DWA-610 User Manual Appendix C - T echnical Specifications T echnical Specifications Standards • IEEE 802.11b • IEEE 802.11g Bus T ype 32-bit Cardbus Wireless Signal Rates* • 54Mbps • 48Mbps • 36Mbps • 24Mbps • 18Mbps • 12Mbps • 11Mbps • 9Mbps • 6Mbps • 5.
63 D-Link DWA-610 User Manual Appendix C - T echnical Specifications Operating T emperature 32°F to 131°F ( 0°C to 40°C) Humidity 95% maximum (non-condensing) Dimensions • L = 120 mm • W = 54 mm • H = 5 mm Weight 0.12 lb (55g) * Maximum wireless signal rate derived from IEEE Standard 802.
デバイスD-Link DWA-610の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DWA-610をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DWA-610の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DWA-610の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DWA-610で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DWA-610を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DWA-610の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DWA-610に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DWA-610デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
