D-LinkメーカーDWL-2210APの使用説明書/サービス説明書
ページ先へ移動 of 16
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-2210AP . 08262004 Before You Begin Check Your Package Contents If any of the above items are missing, please contact your reseller .
2 Connecting the DWL-2210AP to Y our Network There are two methods of powering the DWL-2210AP . The power adapter can plug directly into the unit or plug into the PoE (Power over Ethernet) base unit. T o connect power directly to the DWL-2210AP , please follow the steps on this p age.
3 Connecting the DWL-2210AP to Y our Network (continued) Connecting PoE (Power over Ethernet) to the DWL-2210AP • Step 1 : Connect one end of an Ethernet cable (included with your package) to the LAN port on the DWL-2210AP and the other end of the Ethernet cable to the port labeled P+DA T A OUT on the PoE base unit.
4 When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Connecting the DWL-2210AP to Y our Network (continued).
5 Attach the wireless antenna to this connector . Pressing this button restores the Access Point to its original factory default settings. LAN Port Receptor Reset Button Antenna Connector Connects to a computer , a switch, router , or PoE base unit using an Ethernet cable.
6 The KickStart Wizard is used to discover and identify DWL-2210AP Access Points on a network with a DHCP server . KickS tart will not discover any other devices.
7 Click Administration Console KickS tart will display the Access Point(s) on your network. If necessary , click Back to rescan the network. Click Next Click OK The DWL-2210AP login screen will appear . T ype admin in the User name and Password fields.
8 The DWL-2210AP W eb-management interface will appear . Please refer to the user manual located on the CD-ROM for det ails on configuring the DWL-2210AP .
9 Using a Static IP Address to Connect to the DWL-2210AP T o assign a S tatic IP Address on the computer that you are using to configure the DWL-2210AP , follow the steps for the appropriate operating.
10 Go to Start > Settings > Network and Dial- up Connections . Double-click on the Local Area Connection associated with the Network Adapter installed on your system and select Properties . Click Properties Click Internet Protocol (TCP/IP) Select Use the following IP address Click OK Windows 2000: IP address: 192.
11 Go to Start > Settings > Control Panel > Double-click on the Local Area Connection associated with the Network Adapter installed on your system > select Properties Click Properties Click Internet Protocol (TCP/IP) Select Specify IP Address Click OK Windows Me & 98SE: IP address: 192.
12 Go to the Apple Menu and Select System Preferences. Select Built in Ethernet from the Show pull-down menu Click on Apply Now Select Manually in the Configuration pull-down menu Mac OS X: IP address: 192.168.0.28 Subnet mask: 255.255.255.0 Click on Network Input a static IP address in the same range as the DWL-2210AP’s IP address of 192.
13 Using a Static IP Address to Connect to the DWL-2210AP Click OK The DWL-2210AP login screen will appear . T ype admin in the user name and password fields. T ype http://192.168.0.50 in the address bar and hit Enter or Return. Open up your Web browser .
14 Using a Static IP Address to Connect to the DWL-2210AP The Web-management interface screen will appear . Click Advanced Click Ethernet.
15 Please refer to the user manual located on the CD-ROM for additional details on configuring the DWL-2210AP . Using a Static IP Address to Connect to the DWL-2210AP Under Connection T ype, Select Static IP Enter a Static IP Address , Subnet Mask , and Default Gateway .
T T T T T echni echni echni echni echni cal Support cal Support cal Support cal Support cal Support Y ou can find sof tware updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product.
デバイスD-Link DWL-2210APの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DWL-2210APをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DWL-2210APの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DWL-2210APの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DWL-2210APで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DWL-2210APを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DWL-2210APの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DWL-2210APに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DWL-2210APデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
