D-LinkメーカーDWL-G700APの使用説明書/サービス説明書
ページ先へ移動 of 42
Manual DWL-G700AP 2.4GHz Building Networks for People Wireless Access Point D-Link Air Plus G TM.
2 Content s Package Contents ................................................................................ 3 Introduction ............................................................................................ 4 Wireless Basics ...............
3 Computer with Windows, Macintosh, or Linux-based operating system with an installed Ethernet adapter Content s of Package: D-Link Air Plus TM G DWL-G700AP 2.
4 Introduction At up to five times the speed of previous wireless devices (up to 54Mbps), you can work faster and more efficiently , increasing productivity . W ith the DWL-G700AP , bandwid th- intensive applications like graphics or multimedia will benefit significantly because large files are able to move across the network quickly .
5 Up to 5X Faster with Air Plus G Products - high-speed wireless data transfer rates up to 54Mbps. With increased data rate and cap acity , the DWL-G700AP delivers media rich content such as digital images, videos, and MP3 files much faster than standard 802.
6 W ireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it.
7 Installation Considerations Keep in mind, that the number , thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. T ypical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
8 Please remember that D-Link Air Plus G wireless devices are pre-configured to connect together , right out of the box, with their default settings. Y ou will need broadband Internet access (a Cable .
9 After you have completed the initial installation and the Setup Wizard (as illustrated in the Quick Installation Guide that is included with the DWL-G700AP), you can access the configuration menu, at any time, by opening the web-browser and typing in the IP address of the DWL-G700AP .
10 Using the Configuration Utility (continued) Home > Wireless ASCII (American S tandard Code for Information Interchange) is a code for representing English letters as numbers from 0- 127 Hexadecimal digits consist of the numbers 0-9 and the letters A-F SSID: ( Service Set Identifier ) Default is the default setting.
11 Using the Configuration Utility (continued) Dynamic IP Address: Select this option if you would like to have an IP Address automatically assigned to the DWL-G700AP by a DHCP server in your network. DHCP stands for Dynamic Host Configuration Protocol.
12 Using the Configuration Utility (continued) Home > DHCP DHCP Server: Select Enabled or Disabled . Disabled is the default setting. If you want to use the DWL-G700AP as a DHCP server , to automatically assign dynamic IP addresses on the network, you will select Enabled.
13 Using the Configuration Utility (continued) Advanced > Performance Beacon Interval: Beacons are packets sent by an access point to synchronize a wireless networ k. S pecify a beacon interval value. Default (100) is recommended. RTS Threshold: This value should remain at its default setting of 2,432.
14 Using the Configuration Utility (continued) Advanced > Filters Use MAC Filters to allow or deny wireless clients, by their MAC addresses, from accessing the DWL-G700AP . Y ou can manually add a MAC address or select the MAC a ddress from the list of clients that are currently connected to the router ( Connected PCs ).
15 Using the Configuration Utility (continued) T ools > Admin New Password: Enter the new password. Confirm Password: Re-enter the password to confirm it. T ools > System Save Settings: The current system settings can be saved as a file onto the local hard drive.
16 Using the Configuration Utility (continued) T ools > Firmware Y ou can upgrade the firmware of the DWL-G700AP at this page. When you click Click here to check... in this window you will be connnected to D-Link’s website, where you can download the latest firmware update.
17 Using the Configuration Utility (continued) Status > Log View Log The DWL-G700AP keep s a running log of events and activities occurring on the AP . If the device is rebooted, the logs are automatically cleared. Y ou may save the log files under Log Setting.
18 Using the Configuration Utility (continued) Status> Stats T raffic St atistics The DWL-G700AP keeps statistics of traffic that p asses through it. Y ou are able to view the amount of packets that pass through the Ethernet and wireless portions of the network.
19 Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsof t Windows XP . Note: Please refer to websites such as http://www .homenethelp.com and http://www .microsof t.com/windows2000 for information about networking computers using Windows 2000, Me or 98SE.
20 Please follow all the instructions in this window: Networking Basics (continued) Click Next. In the following window , select the best description of your computer . If your computer connects to the internet through a gateway/router , select the second option as shown.
21 Enter a Computer description and a Computer name (optional.) Networking Basics (continued) Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name.
22 Please wait while the Network Setup Wizard applies the changes. Networking Basics (continued) When the changes are complete, click Next . Please wait while the Network Setup Wizard configures the computer .
23 Networking Basics (continued) In the window below , select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Click Next . Insert a disk into the Floppy Disk Drive, in this case drive A.
24 Networking Basics (continued) Please read the information under Here’ s how in the screen below . After you com- plete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network.
25 Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard . The new settings will take ef fect when you restart the computer . Click Ye s to restart the computer . Y ou have completed configuring this computer.
26 Networking Basics (continued) Naming your Computer T o name your computer , please follow these directions:In Windows XP : Click Start (in the lower left corner of the screen). Right-click on My Computer . Select Properties and click. Select the Computer Name T ab in the System Properties window .
27 Networking Basics (continued) Naming your Computer In this window , enter the Computer name. Select Workgroup and enter the name of the Workgroup.
28 Networking Basics (continued) Checking the IP Address in W indows XP This window will appear . Click the Support tab. Click Close. Assigning a Static IP Address in W indows XP/2000 Note: Re.
29 Networking Basics (continued) Assigning a Static IP Address in W indows XP/2000 Double-click on Network Connections. Double-click on Properties.
30 Select Use the following DNS server address . Enter the LAN IP address of the wireless router . (D-Link wireless routers have a LAN IP address of 192.168.0.1) Networking Basics (continued) Assigning a S tatic IP Address in Windows XP/2000 Y ou have completed the assignment of a static IP address.
31 Networking Basics (continued) Checking the Wireless Connection by Pinging in Windows XP/2000 Checking the Wireless Connection by Pinging in Windows Me /98SE Go to Start > Run > type cmd . A window similar to this one will appear . T ype ping xxx.
32 Check that the Ethernet LED on the DWL-G700AP is ON . If the LED is not ON , check that the cable for the Ethernet connection is securely inserted. Check that the Ethernet adapter is working properly .
33 T roubleshooting (continued) Make sure the wireless client is associated and joined with the correct access point (DWL-G700AP). T o check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks .
34 3. Check that the drivers for the network adapters are inst alled properly . T roubleshooting (continued) Y ou may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using.
35 T roubleshooting (continued) Double-click on Network Adapters Right-click on D-Link Air DWL-650 Wireless Cardbus Adapter (or whatever network adapter you are using) Select Properties to check that the drivers are installed properly Click OK Look under Device Status to check that the device is working properly .
36 T roubleshooting (continued) 4. Resetting the DWL-G700AP to Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DWL-G700AP to the factory default settings. Remember that D-Link Air Plus G products network together , out of the box, at the factory default settings.
37 T echnical S pecifications Standards · IEEE 802.1 1b · IEEE 802.1 1g · IEEE 802.3 · IEEE 802.3u Device Management · Web-Based — Internet Explorer v6 or later; Netscape Navigator v6 or later; or other Java-enabled browsers. Data Rate For 802.
38 T echnical Specifications (continued) · 24Mbps 16QAM, 10% PER,-74dBm · 18Mbps QPSK, 10% PER,-77dBm · 12Mbps QPSK, 10% PER,-79dBm · 1 1Mbp s CCK, 8% PER,-82dBm · 9Mbps BPSK, 10% PER,-81dBm · 6Mbps BPSK, 10% PER,-82dBm · 5.
39 T echnical Support Y ou can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product.
40 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the p.
41 • The original product owner must obtain a Return Material Authorization (“RMA”) number from the Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided.
42 Governing Law : This Limited W arranty shall be governed by the laws of the S tate of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limit ations and exclusions may not apply .
デバイスD-Link DWL-G700APの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
D-Link DWL-G700APをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはD-Link DWL-G700APの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。D-Link DWL-G700APの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。D-Link DWL-G700APで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
D-Link DWL-G700APを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はD-Link DWL-G700APの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、D-Link DWL-G700APに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちD-Link DWL-G700APデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
