DaewooメーカーDH-6100Pの使用説明書/サービス説明書
ページ先へ移動 of 64
HDD/DVD Recor der HDD/DVD Recor der DH-6100P User Manual HELP LINE Number ; 0870 100 2525 With queries, please quote the page number, reference number and model number.
INTRODUCTION 1 Safety Instructions Safety Instructions Please keep the product’s guarantee sheet and receipt in a safe place. Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your product.
2 Impor tant Safeguards Impor tant Safeguards IMPORTANT FOR LASER PRODUCTS LASER This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location - see service procedure.
INTRODUCTION 3 Important Safeguards This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
4 Important Safeguards product. 17 DISC Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 18 SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
Recording Basic Recording ________________________________41 Recording to DVD or HDD 41 One Touch Record (OTR) 41 To Pause the Recording 42 Playing under recording 42 Timer Recording _________________.
The following discs can be used in your HDD/DVD Recorder: Playback and recording DVD+RW (Digital Versatile Disc + ReWritable) DVD+R (Digital Versatile Disc + Write-Once) DVD-R (DVD-Recordable) / DVD-RW (DVD- Rewritable): Recording with +VR Format (Dual media support).
Disc-related T er ms Title (DVD only) The main film, accompanying feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (DVD only) Sections of a movie or a musical piece that are smaller than titles.
Notes on Recording • The recording times shown are not exact because the HDD/DVD Recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded.
INTRODUCTION 9 Overview Handling the Unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback.
3 AVF Input (VIDEO, L-AUDIO-R) Connects to the audio/video output of an external source (VCR, Camcorder, etc.). 4 S-VIDEO Input Connects to the S-Video output of an external source (VCR, Camcorder, etc.). ! Disc Tray (DVD deck) Insert a disc here. @ Front Panel Display Shows the current status of the HDD/DVD Recorder.
INTRODUCTION 11 Front Panel Display Identification of Controls Channel PR23 TV Channel Input mode Au-1 AV1 input Au-2 AV2 input Recording on disc Recording on HDD 11:15 Indicates a DVD Timer recording is set. 11:15 Indicates a DVD Timer Recording is in standby mode.
12 Remote Control Identification of Controls - Turns the HDD/DVD Recorder on and off. - Locks the front panel by pressing and holding it over 5 seconds. Opens and closes the disc tray. Selects DVD mode. HDD Selects HDD mode. DV Not available INPUT Switches the HDD/DVD Recorder input to RF (Tuner), AV1, AV2, AVF or S- VIDEO.
INTRODUCTION 13 Identification of Controls CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
! S-VIDEO OUT Connect to a TV with an S-Video Input. @ AUDIO OUT (L, R) Connect to a TV or other equipment with audio inputs. # COMPONENT VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr) inputs. $ Scart socket 2 Connection of an additional device (satellite receiver, set-top box, video recorder, camcorder, etc.
If your cable wire is connected to your TV without a converter or descrambler box, unscrew the wire from your TV and attach it to the RF IN (FROM ANT.) jack on the rear panel of the HDD/DVD Recorder. Use the supplied RF cable to connect between the HDD/DVD Recorder’s OUT (TO TV) jack and the antenna input jack on your TV.
1 Connect the HDD/DVD Recorder’s DIGITAL AUDIO OUT jack (Coaxial or Optical) to the corresponding in jack on your amplifier. Use an optional digital coaxial (or optical) audio cable. (X) 2 You will need to activate the HDD/DVD Recorder’s digital output; see ‘Audio’ Settings on page 25.
CONNECTIONS 17 Connections To receive audio/video signals from other equipment, connect the AVF (Audio/Video Front) jacks on the HDD/DVD Recorder to the audio/video out jacks on your external component, using optional audio/video cables.
7 The HDD/DVD Recorder detects channels automatically and stores them in memory. 8 After finishing Auto Channel Search, set the clock. 9 Use [ œ / √ ] to move left/right and use [ … / † ] to change the settings. 10 After setting the clock, press [ENTER] to confirm.
19 SETUP 4 Press [ENTER]. The ‘Manual Setup’ menu appears. 5 Use [ … / † ] to select ‘Standard‘. Press [ENTER] to move to the second level. 6 Use [ … / † ] to select the desired ‘Standard’ (PAL-BG, PAL-II, PAL-DK, or SECAM-L), then press [ENTER].
14 Use [ … / † ] to select ‘Store Channel‘. Press [ENTER] to move to the second level. 15 Use [ … / † ] to select program number to store and press [ENTER] to confirm. 16 Use [ … / † ] to select ‘Program Name‘. Press [ √ ] to move to the second level.
SETUP 21 Auto Set The HDD/DVD Recorder has a frequency synthesized tuner capable of receiving channels that include VHF Low E2~S6, VHF High S7~S36, and UHF S37~E69. Preparation: Connect the HDD/DVD Recorder to the desired type of antenna or cable TV system, as shown in ‘Connecting Antenna/Cable‘ on page 15.
2 Press [ … / † ] to select the PR number you want to move to. 3 Press [ENTER]. The selected PR Will be moved to the new PR number. Delete After tuning TV stations into your HDD/DVD Recorder, you may wish to delete a station. 1 Use [ … / † ] to select 'Delete' and press [ENTER].
SETUP 23 HDD Record Quality You can set the default HDD recording quality to (Approx. time) : HQ (16hrs), SP(33hrs), EP (64hrs), or SLP (97hrs) Follow the same procedure as the 'DVD Record Quality'. Auto Chapter During recording, chapter markers are added automatically at fixed intervals.
Auto : Convert to the appropriate aspect ratio automatically. TV Aspect Ratio 1 Use [ … / † ] to select ‘TV Aspect‘ while the ‘Video‘ submenu is displayed. 2 Press [ENTER] or [ √ ] to go to the second level. 3 Use [ … / † ] to select the desired ‘TV Aspect’.
SETUP 25 Bitstream Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby Digital or DTS decoder). Vir tual Surround You can enjoy a simulated 3D effect from two speakers by setting Virtual Surround to On.
5 After setting the password, press [ENTER] while 'Set Parental Level' is displayed. 6 Enter your new password. 7 Use [ … / † ] to select the desired parental level and press [ENTER] to confirm. Off : If you select Unlock, the Lock feature is not active.
SETUP 27 Parental Countr y Code 1 While ‘Preferences‘ is selected, press [ † ] to select ‘Parental Controls‘. Then press [ † ] to select ‘Parental Country Code‘. 2 Press [ENTER]. Enter your current 4-digit password then press [ENTER]. 3 Use [ … / † ] to select the desired country and press [ENTER] to confirm.
PREFERENCES / Auto Settings 1 While ‘Preferences‘ is selected, press [ † ] to select ‘Auto Settings‘. 2 Press [ENTER] to display the submenu. Auto Clock Set Auto Clock enables the HDD/DVD Recorder to set the clock automatically whenever it is in Standby mode (plugged in but powered off).
SETUP 29 Auto Title Delete 1 Use [ … / † ] to select ‘Auto Title Delete‘ while the ‘Hard Disk’ submenu is displayed. Press [ENTER] or [ √ ] to go to the second level. 2 Use [ … / † ] to select the desired option. 3 Press [ENTER] to confirm your selection.
Reset Hard Disk This feature enables you to erase the entire content of the HDD. Please proceed with caution, as this process is irreversible. 1 Use [ … / † ] to select ‘Reset Hard Disk’ while the ‘Hard Disk’ submenu is displayed. 2 Press [ENTER].
SETUP 31 If you wish, you can reset the HDD/DVD Recorder to its original factory settings. 1 Press [SETUP]. 2 Use [ œ / √ ] to select ‘Restore Defaults‘. 3 Press [ENTER]. 4 The Initialize menu will appear. Use the [ … / † ] buttons to select ‘Yes‘ and press [ENTER].
3 Use [ …† ] to change the numbers. Press [ENTER] to confirm. Chapter Shows the current chapter number and total number of chapters, and skips to the desired chapter number. 1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
SETUP 33 You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
Still Picture and Frame-by-Frame Playback 1 Press [PLAY/PAUSE] during playback. The HDD/DVD Recorder will go into Still mode. 2 You can back up or advance the picture frame- by-frame by pressing [FF ( √√ )] repeatedly during Still mode. Fast For ward/Backward 1 Press [REW ( œœ )] or [FF ( √√ )] during playback.
PLAYBACK 35 Selecting Titles When a disc has more than one title, you can select among all available titles as follows: 1 Press [DISPLAY] and use [ …† ] to select the Title icon. Press [ENTER] to display a submenu. Use [ …† ] to select the desired title number and press [ENTER] to confirm.
36 Playing a Picture or Music files Playing a Picture or Music files The HDD/DVD Recorder can play MP3 files on a disc such as CD-R/RW, DVD+R/RW, DVD-R/RW, or on HDD Media. 1 Prior to playing MP3 files on disc, insert disc and close the tray. 2 Press [MENU] to bring up the Media Browser and select the media (HDD Media, DVD) you want to play.
PLAYBACK 37 Playing a Picture or Music files The HDD/DVD Recorder can play JPEG Picture files on a disc such as CD-R/RW, DVD+R/RW, DVD- R/RW, or on HDD Media. 1 Prior to playing Jpeg picture files on disc, insert disc and close the tray. 2 Press [MENU] to bring up the Media Browser and select the media (HDD Media, DVD) you want to play.
38 Playing a Picture or Music files You can enjoy a slide show while listening to MP3 music files. 1 Prepare the Disc which includes both MP3 and JPEG files. Or copy the files to HDD Media category. 2 Insert the disc. Then press [MENU] to bring up Media browser.
PLAYBACK 39 Time shifting & Saving Time shifting & Saving When the HDD/DVD Recorder is turned on or you press the [HDD] button on the remote control or the [DVD/HDD] button on the front panel to move to HDD mode from other menus, the last viewed TV channel will be tuned in and Time shifting starts automatically.
40 Indicates recording to the HDD and Rec Speed The saved program will be removed from the Time shifting buffer when it is about to be overwritten by a Live recording. During recording from the Time shifting buffer, [PLAY/PAUSE] dose not work as pause(play) the recording but work as pause(play) the broadcast in the buffer.
PLAYBACK 41 5 Press [REC ( ● )] once. Recording will start. The REC indicator lights on the front panel display. Recording continues until you press [STOP] or the disc is full. To record for a fixed length of time, see One Touch Record. 6 Press [STOP ( ■ )] to stop recording.
42 1 Press [PLAY/PAUSE] to pause the disc during recording. 2 To continue recording in DVD mode, press [PLAY/PAUSE] or [REC ( ● )]. T o Pause the Recording 1 Press [MENU] to play DVD or HDD during recording. Then Media Browser appears. 2 In Media Browser, Select and play the media you want to view among HDD and DVD.
RECORDING 43 Thanks to this programming system, you no longer need to tediously enter the date, programme number, start and end time. All the information needed by the HDD/DVD Recorder for programming is contained in the VideoPlus programming number. This VideoPlus number is found in most TV listings.
44 5 The decoded information appears after confirmation. You can go back at any time to change the information by pressing [ENTER]. Select the appropriate input field using [ …† ]. If required, change the information using [ …† ]. If all the information is correct, press the [ENTER] button.
RECORDING 45 You can record from an external component, such as a camcorder, VCR or Digital Camera, connected to any of the HDD/DVD Recorder’s external inputs. 1 Make sure the component you want to record from is connected properly to the HDD/DVD Recorder; see pages 15~17.
46 Dubbing Dubbing 1 Prior to selecting titles for dubbing, you need to insert a recordable disc into the tray. The DVD+HDD Combination may take a few moments to format the disc if it is used for the first time, determine compatibility and free recordable space.
RECORDING 47 1 Prior to selecting titles for dubbing, you need to insert a disc to be dubbed into the tray. 2 Press [DUB], then 'Media Dubbing' appears. 3 Select 'DVD to HDD'' using [ …† ] and press [ENTER]. 4 Select the title you want to dub using [ …† ] and press [ENTER] to add.
48 Media files Copying - Open : Open the media and folder you want to copy to. - Copy Here : Copy to the media immediately after confirmation message. - Create folder : Create folder in the media you want to copy to. 6 After selecting the destination to be copied, select 'Copy here' and press [ENTER].
RECORDING EDITING 49 Follow these instructions to play back a scene from the Title List. 4 Select the title to playback using [ENTER]. 5 Then select ‘Play‘ using [ … † ]. Press [ENTER] to play the title. Or press [PLAY/PAUSE] to play the title.
50 Editing a HDD title Renaming (Labeling) a Title Follow these instructions to rename a title list name,i.e., to edit the title of a recorded program. 4 Select the title to be labeled using [ENTER]. 5 Select ‘Edit’ using [ … † ] . 6 Press [ENTER] to go to submenu.
EDITING 51 • Hide Chapter : Use to hide or unhide chapter markers in the title. Depending on whether a chapter is currently hidden or unhidden, one of the following options will be available : Hide : press [ENTER] to hide the current chapter during playback.
52 Dubbing a HDD title to DVD disc Follow these instructions to copy the title(s) selected with the same properties (title name, duration, index picture, Lock, Chapter Mark) information over to DVD. 4 Select the title to be dubbed using [ENTER]. 5 Then select ‘Dubbing‘ using [ … † ].
EDITING 53 Disc Manager Disc Manager This section explains edit functions for the entire disc and for the titles in the disc. At first, go to ‘Disc Menu’ mode. 1 Press [MENU] to go to ‘Disc Menu’ menu. 2 If you want to display ‘Title Edit’ menu, press [ √ ] in ‘Disc Menu’ menu.
54 Lock/Unlock Disc (DVD±R W) If you want to protect a disc from accidental recording, editing, or erasing, you can lock the disc. Later, if you change your mind, you can unlock the disc. 4 Use [ œ / √ ] to select ‘Lock/Unlock Disc’. Press [ENTER] as shown on the screen.
EDITING 55 If ‘Lock Disc’ is set to ‘On’ in the DISC Settings menu, you cannot rename your disc; see page 54. Change Disc Name You can rename your disc to any name you choose. The default disc name is ‘MY DVD‘. 4 Use [ œ / √ ] to select ‘Change Disc Name‘.
56 Change Name To change the name of a title: 4 Select ‘Change Name’ using [ œ √ ] . 5 Press [ENTER] to change the title name. 6 The Keyboard Menu will be displayed. Use [ œ √…† ] to select a character or function and press [ENTER]. CLR : Clear the whole title.
EDITING 57 When you insert a DVD±R or DVD±RW disc already recorded by your HDD/DVD Recorder, you can edit the titles and chapters in a variety of ways. At first, go to ‘DVD Edit’ mode. 1 Press [MENU] to go to ‘Disc Menu’ menu. 2 Select the recorded title you want to edit using [ …† ].
58 Disc Manager desired chapter number and then press [ENTER]. Edit Chapters You can add a chapter marker anywhere in a title during playback. Once the chapter is marked, you can use the chapter search feature as described above. You can add/delete chapter markers or delete all chapter markers in a title.
EDITING REFERENCE 59 Check the following guide for the possible cause of a problem before contacting customer support. Symptom Cause Solution T r oubleshooting T r oubleshooting Plug the power cord into the wall outlet securely. Select the appropriate video input on the TV so the picture from the HDD/DVD Recorder appears on the TV screen.
60 Troubleshooting Symptom Cause Solution When the HDD/DVD Recorder is moved from a cold place to a warm place. Under extremely humid conditions. Keep the HDD/DVD Recorder plugged into an AC power outlet with the power on. This will help prevent condensation.
REFERENCE 61 General Power requirements 200–240V~, 50/60 Hz Power consumption 40W Dimensions(approx.) 435 x 55 x 343 mm (w x h x d) Mass (approx.) Net : 4.
GU ARANTEE REGISTRA TION IMPORT ANT TEAR OFF HERE AND RETURN TODAY REGISTERING Y OUR NEW D AEWOO PR ODUCT To register you product for its 12 month guarantee please complete and return the section below. MR MRS MS SURNAME NUMBER/HOUSE NAME/STREET COUNTRY MODEL No.
DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit.
デバイスDaewoo DH-6100Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Daewoo DH-6100Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDaewoo DH-6100Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Daewoo DH-6100Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Daewoo DH-6100Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Daewoo DH-6100Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDaewoo DH-6100Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Daewoo DH-6100Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDaewoo DH-6100Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
