AiphoneメーカーMASTER STATION AI-MS900の使用説明書/サービス説明書
ページ先へ移動 of 16
INSTR UCTION MANU AL MASTER ST A TION AI-MS900 Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. Be sure to leave system installations, adjustments, and data settings to the dealer from whom you have purchased.
2 T ABLE OF CONTENTS 1. SAFETY PRECA UTIONS ............................................................................................. 3 2. FCC REQUIREMENTS ...........................................................................................
3 1. SAFETY PRECA UTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
4 (4 ) If the AI-900 disrupts the telephone network, the telephone company can discontinue your service temporarily. If possible, the telephone company will notify you in advance. If advance notice is not practical, they will notify you as soon as possible.
5 5. GENERAL DESCRIPTION The AI-MS900 can make calls to or receive calls from the substation or the master station (telephone). It utilizes 2 pairs of twisted cables. 6. NOMENCLA TURE AND FUNCTIONS 2 ABC 13 DEF 12 34 56 78 5 JKL 4 GHI 6 MNO 8 TUV 7 PRS 9 WXY 0 C OPER P T T REDIAL XFER # HANDSET REGISTER Do not connect thei jack to telephone line.
6 7. INST ALLA TION 7.1. Mounting 7.1.1. Desk-top mounting Connect the supplied modular-plug cord. 7.1.2. Wall mounting Pull out, rotate, and reset the cradle hook, then mount the station on the wall using the supplied wall mounting frame. Remove the cradle hook.
7 7.2. Connection and Adjustment 7.2.1. External speaker connection Follow the procedures below when connecting an external speaker (8 Ω ). Step 1. Remove the AI-MS900's rear terminal cover and set the internal slide switch to the [EXT. SP] position.
8 8. OPERA TION 8.1. Calling a Substation Step 1. Dial the desired substation number. (Dialing can be performed with the handset on-hook or off- hook.) Step 2. Following a brief call tone, the master station is automatically connected to the substation.
9 Step 3. The call tone stops and conversation can proceed when the called party answers. Step 4. To terminate the conversation, replace the handset or press the [C] key. 8.3. Being Called Step 1. A trill call tone is heard. Step 2. Lifting the handset stops the call tone and permits conversation to proceed.
10 8.4. Con versation Method There are three different conversation methods possible when the master station is used. The conversation method is determined by the other party's station type and handset use.
11 8.5. Calling P arty Display and Selective Response 8.5.1. Calling party display The master station can only display one of up to 64 calling stations by means of its 6-digit number or 8- character name.
12 8.5.2. Selective response When multiple calls are simultaneously made to the master station, the master station can select and answer any desired calling party. (Note this function can only be performed by a dedicated master station and not a telephone.
13 8.6. A uto Dialing 8.6.1. Auto dialing key call A one-touch press of an auto dialing key automatically dials the station number or functional number of dialing sequence to activate Paging, Call Forwarding, or other functions assigned to into that key.
14 Step 5. Press the new keys to register using the dialing keys [0] – [9] or function keys [ ], [#] or [REDIAL]. Notes • If the [C] key is pressed before dialing a complete number, the contents before the [C] key was pressed are all erased. • Mark "-" is displayed when the [REDIAL] key is pressed.
15 Step 5. Press the [PTT] key again. The erasure is then completed, as indicated by a confirmation tone. Step 6. Shift the [REGISTER] switch back to the OFF position. The station will be placed in standby mode. 8.6.4. Auto dialing key registration confirmation Step 1.
Printed in Japan 133-06-236-80 8.7. Redial By one-touch pressing the master station's [REDIAL] key, the last dialed number will be dialed again. 9 2 Call No.
デバイスAiphone MASTER STATION AI-MS900の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Aiphone MASTER STATION AI-MS900をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAiphone MASTER STATION AI-MS900の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Aiphone MASTER STATION AI-MS900の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Aiphone MASTER STATION AI-MS900で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Aiphone MASTER STATION AI-MS900を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAiphone MASTER STATION AI-MS900の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Aiphone MASTER STATION AI-MS900に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAiphone MASTER STATION AI-MS900デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
