DCSメーカーBGB131-BIの使用説明書/サービス説明書
ページ先へ移動 of 22
THE PROFESSIONAL SIDE BURNER Use a nd Ca re Guide MODELS: BGB131 BGB132 BGB131-BI BGB132-BI.
1 A MESSA GE T O OUR CUST OMERS We are glad that you selected the Professional Side Burner by DCS. Because this appliance c ontains features not found on any other burner , we recommend that you read this entire booklet before your first use . Keep it in a handy place as it has answers to questions that may occur during future use.
TA B L E O F CO N T ENTS 2 SAFET Y PRACTICES AND PRECA UTIONS ..................................................................................................3-4 SIDE BURNER 131/132 SIDE MOUNT MODEL INST ALLA TION ...................................
3 SAFET Y PRACTICES & PRECA UTIONS Improper use or installation is dangerous. Car efully follow these instructions. Always remov e the cover bef ore lighting the Prof essional Side Burner . Never use the Side Burner if a leak is present. Do not use a flame to check for gas leaks.
INST ALLA TION OF SIDE BURNER: All BGB131 and BGB132 models can be installed in c ombustible enclosure with zero clear ance from the back, sides and bottom.
5 SIDE BURNER 131/132 SIDE MOUNT MODEL INST ALLA TION 2 " 23- 3/4" 10-3/8" 26- 3/4" 12- 3/4 " 2 " 15 -3 / 4 " Standard construction 13-1/8" 10 - 1/4" 2&quo.
SIDE BURNER BUIL T-IN MODEL INST ALLA TION 6 INST ALLA TION OF SIDE BURNER BUIL T-IN: All BGB131-BI and BGB132-B I models can be installed in combustible enclosure with zero clearance from the back, side and bottom.
7 SIDE BURNER BUIL T-IN MODEL INST ALLA TION 22- 1/8" 2 " 25- 1/2" 10-1/16" 25- 1/2" 11- 3/4" 2 " 14 -3 / 4 " Single Side Burner Dual Side Burner Standard const.
8 GAS REQUIREMENTS GAS REQUIREMENTS: Ve rify the type of gas supply to be used, either natural or LP . Make sure the marked gas on the appliance rating plate(s) and hook-up kit agrees with that of the supply . Never c onnect an unregulated gas line to the appliance.
9 GAS REQUIREMENTS LP T ANK REQUIREMENTS A dented or rusty LP tank may be hazardous and should be checked by y our LP supplier . Never use a cylinder with a damaged valve . T he LP gas cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.
10 LEAK TESTING & LIGHTING INSTRUCTIONS WA R N ING: Do not sm oke while leak testing . Extinguish all open flames. Ma ke a soap solution of one par t liquid detergent, and one par t water . Never test for leaks with an open flame. F or LP units, check with a full cylinder .
11 LIGHTING INSTRUCTIONS MA TCH LIGHTING Hold a fireplace lit match near the burner ports, turn the control knob counterclockwise to “HI” .M o v e y our hand immediately once the burner is lit.
12 FINAL CHECKLIST Specified clearances maintained to combustibles . Pr ofessional Side Burner is properly mounted . All internal packaging removed . Burner is seated properly and does not rock. Each burner lights satisfactorily , individually or with adjacent burner lit.
13 GENERAL CLEANING BURNERS Fo r proper lighting and performance k eep the burners clean. I t is necessary to clean the burners if they do not light even though the igniter clicks , if there has been a severe boil o ver , or when the flame does not burn blue.
14 TROUBLESHOO TING Burner won ’t light when the ignition is pushed. Burner flame is yellow or orange , in c onjunction with the odor of gas. Lo w heat with k nob in “HI” position. Remove the burner grat e. With the control knob in the “OFF” position, listen to the electrode while engaging the ignition.
15 SINGLE SIDE BURNER P ARTS LIST FOR BGB131 & BGB131-BI NO TE: P art list t ypical for BGB131 & BGB131-BI models . Illustration sho ws BGB131-BI model.
16 DOUBLE SIDE BURNER P ARTS LIST FOR BGB132 & BGB132-BI NO TE: P art list t ypical for BGB132 & BGB132-BI models . Illustration sho ws BGB132-BI model.
17 SINGLE & DOUBLE SIDE BURNER WIRING DIA GRAM SP ARK ELECTRODE (P/N 12224) SP ARK ELECTRODE (P/N 12224) SINGLE SIDE B URNER DOUBLE SIDE B URNER 1.
18 WA R R A N T Y LENGTH OF W ARRANT Y DCS warrants all other Side Burner components parts and labor to the original purchaser to be free of factor y defects in material and workmanship for a period of one (1) y ear from the original date of purchase.
19 SERVICE HOW T O OBT AIN SERVICE: F or warranty ser vice, please contact your local service provider or DCS Customer Car e Center at (888) 281-5698, Monday thru Frida y , 6 am- 4:30 pm PST .
NO TES 20.
21 Pa rt No. 17712 Rev. B Litho in USA 03/2004 As product improvement is an ongoing pr ocess at DCS, we r eserve the right to change specifications or design without notice. 5800 Skylab Road, Huntington Beach, CA 92647 T el: 714.372.7000 • Fax: 714.
デバイスDCS BGB131-BIの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
DCS BGB131-BIをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDCS BGB131-BIの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。DCS BGB131-BIの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。DCS BGB131-BIで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
DCS BGB131-BIを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDCS BGB131-BIの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、DCS BGB131-BIに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDCS BGB131-BIデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
