Dellメーカー1535の使用説明書/サービス説明書
ページ先へ移動 of 41
Dell™Studio1535/1536ServiceManual Before You Begin Base Cover Coin - Cell Battery Memory Hard Drive Processor Thermal - Cooling Assembly Processor Module Center Control Cover Keyboard Wi.
Back to Contents Page Base Cover Dell™Studio1535/1536ServiceManual Removing the Base Cover 1. Ensure that the computer is turned off.
Back to Contents Page Before You Begin Dell™Studio1535/1536ServiceManual Recommended Tools Before Working Inside Your Computer This document provides procedures for removing and installing the components in your computer.
9. Turn the computer top side up, open the display, and press the power button to ground the system board. Back to Contents Page 1 battery 2 battery release latch.
Back to Contents Page Flashing the BIOS Dell™Studio1535/1536ServiceManual If a BIOS - update program CD is provided with a new system board, flash the BIOS from the CD. If you do not have a BIOS - update program CD, flash the BIOS from the hard drive.
9. Double - click the file icon on the desktop and follow the instructions on the screen. Back to Contents Page .
Back to Contents Page USB/Audio Board Dell™Studio1535/1536ServiceManual Removing the USB/Audio Board 1. Follow the procedures in Before You Begin . 2. Remove the optical drive (see Removing the Optical Drive ). 3.
Back to Contents Page Camera Dell™Studio1535/1536ServiceManual Removing the Camera Module 1. Follow the instructions in Before You Begin . 2. Remove the display bezel (see Removing the Display Bezel ). 3. Loosen the two screws connecting the camera to the display cover.
Back to Contents Page Center Control Cover Dell™Studio1535/1536ServiceManual Removing the Center Control Cover 1. Follow the procedures in Before You Begin . 2. Remove the two screws securing the center control cover from the battery bay.
8. Lift the keyboard and hold it up and slightly forward to access the media control buttons connector on the system board. 9. Disconnect the media control buttons cable from the connector on the system board. Replacing the Center Control Cover 1.
Back to Contents Page Coin - Cell Battery Dell™Studio1535/1536ServiceManual Removing the Coin - Cell Battery 1. Follow the instructions in Before You Begin . 2. Remove the base cover (see Removing the Base Cover ). 3.
Back to Contents Page Processor Module Dell™Studio1535/1536ServiceManual Removing the Processor Module 1. Follow the instructions in Before You Begin . 2. Remove the processor thermal - cooling assembly (see Removing the Processor Thermal - Cooling Assembly ).
When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the others, the module is not seated properly. 3. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.
Back to Contents Page Processor Thermal - Cooling Assembly Dell™Studio1535/1536ServiceManual Removing the Processor Thermal - Cooling Assembly 1. Follow the instructions in Before You Begin . 2. Turn the computer over and remove the base cover (see Removing the Base Cover ).
.
Back to Contents Page Display Dell™Studio1535/1536ServiceManual Display Assembly Display Bezel Display Panel Display Inverter Display Hinges Display Assembly Removing the Display Assembly 1.
8. Disconnect the display data cable from the connector on the system board, loosen the captive screw, and release the cable from the securing plastic tabs. 9. Disconnect the camera cable from the system board, loosen the captive screw, and release it from the securing plastic tabs.
7. Replace the keyboard (see Replacing the Keyboard ). 8. Replace the center control cover (see Replacing the Center Control Cover ). 9. Close the display and turn the computer over. 10. Replace and tighten the two screws securing the display assembly to the bottom of the computer.
Display Panel Removing the Display Panel 1. Follow the instructions in Before You Begin . 2. Remove the display assembly (see Removing the Display Assembly ). 3. Remove the display bezel (see Removing the Display Bezel ). 4.
8. Turn over the display panel and remove the conductive tape on the display board. 9. Disconnect the display cable from the display board. Replacing the Display Panel 1.
9. Replace the keyboard (see Replacing the Keyboard ). 10. Replace the center control cover (see Replacing the Center Control Cover ). Display Inverter Removing the Display Inverter 1. Follow the instructions in Before You Begin .
3. Remove the display panel without removing the display bracket. See Removing the Display Panel . 4. Remove the four screws (two on each side) securing the display hinges to the display cover. 5. Remove the display hinges. Replacing the Display Hinges 1.
Back to Contents Page Hard Drive Dell™Studio1535/1536ServiceManual Removing the Hard Drive 1. Follow the procedures in Before You Begin . 2. Turn the computer over and remove the base cover (see Removing the Base Cover ).
8. Disconnect the hard drive cable from the connector on the hard drive.. Replacing the Hard Drive 1. Follow the instructions in Before You Begin . 2. Connect the hard drive cable to the connector on the hard drive. 3. Replace the hard drive cage and tighten the four screws to secure the cage to the hard drive.
Back to Contents Page Keyboard Dell™Studio1535/1536ServiceManual Removing the Keyboard 1. Follow the procedures in Before You Begin . 2. Remove the center control cover (see Removing the Center Control Cover ). 3.
Replacing the Keyboard 1. Follow the procedures in Before You Begin . 2. Slide the keyboard cable into the keyboard connector. 3. Rotate the keyboard connector latch to secure the cable. 4. Align the tabs along the bottom of the keyboard and slide them into the slots of the palm rest.
Back to Contents Page Battery Latch Assembly Dell™Studio1535/1536ServiceManual Removing the Battery Latch Assembly 1. Follow the instructions in Before You Begin . 2. Remove the base cover (see Removing the Base Cover ).
1. Slide the battery latch assembly into place. 2. Replace and tighten the screw securing the battery latch to the computer cover. 3. Follow the steps in Removing the Battery Latch Assembly in the reverse order.
Back to Contents Page Memory Dell™Studio1535/1536ServiceManual You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Quick Reference Guide for information on the memory supported by your computer.
3. Replace the base cover (see Replacing the Base Cover ). 4. Slide the battery into the battery bay until it clicks into place, or connect the AC adapter to your computer and an electrical outlet.
Back to Contents Page Microphone Dell™Studio1535/1536ServiceManual Removing the Microphone Module 1. Follow the procedures in Before You Begin . 2. Remove the palm rest. See Removing the Palm Rest . 3. Disconnect the microphone cable from the system board and remove the microphone module.
Back to Contents Page Wireless Mini - Card Dell™Studio1535/1536ServiceManual Your computer supports three Mini - Card slots: l Two Full Mini - Card slots – for WWAN, WPAN, .
Replacing the Mini - Card 1. Follow the instructions in Before You Begin . 2. Remove the new Mini - Card from its packaging. 3. Insert the Mini - Card connector at a 45 - degree angle into the appropriate system board connector. For example, the WLAN card connector is labeled WLAN and so on.
Back to Contents Page .
Back to Contents Page Optical Drive Dell™Studio1535/1536ServiceManual Removing the Optical Drive 1. Follow the procedures in Before You Begin . 2. Remove the palm rest (see Removing the Palm Rest ). 3. Remove the three screws on the optical drive and take out the optical drive from the bay.
Back to Contents Page 1 optical drive 2 optical drive interposer.
Back to Contents Page Palm Rest Dell™Studio1535/1536ServiceManual Removing the Palm Rest 1. Follow the instructions in Before You Begin . 2. Remove the base cover (see Removing the Base Cover ). 3. Remove the eight screws from the bottom of the computer.
9. Moving from left to right, carefully lift the palm rest along the rear edge, near the hinge brackets, then gently lift the palm rest to remove it from the computer. Replacing the Palm Rest 1. Align the palm rest with the base of the computer and gently snap it into place.
Back to Contents Page Speaker Assembly Dell™Studio1535/1536ServiceManual Removing the Speaker Assembly 1. Follow the instructions in Before You Begin . 2. Remove the palm rest (see Removing the Palm Rest ). 3. Remove the four screws (two on each side) on the speakers.
Back to Contents Page System Board Assembly Dell™Studio1535/1536ServiceManual The BIOS chip in the system board contains the Service Tag, which is also visible on a barcode label on the bottom of the computer.
1. Replace the system board in position. 2. Replace the four screws on the top of the system board. 3. Connect the system board cable. 4.
デバイスDell 1535の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Dell 1535をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDell 1535の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dell 1535の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dell 1535で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dell 1535を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDell 1535の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dell 1535に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDell 1535デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。