DellメーカーPP04Xの使用説明書/サービス説明書
ページ先へ移動 of 152
www .dell.com | support.dell.com Dell™ Latitude™ D830 User’ s Guide Model PP04X.
Notes, Notices, and Cautions NOTE: A NOTE indicates important info rmation that helps you make better use of your computer . NOTICE: A NOTICE indicates either potential damage to hardw are or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for pro perty damage, personal injury , or death.
Contents 1 Contents 1 Finding Information 2 About Y our Computer Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Left Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Right Side View .
2 Contents Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Storing a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 4 Using the Keyboard Numeric Keypad . . . . . . . . . . . . . . . . .
Contents 3 Microsoft ® Windows ® XP . . . . . . . . . . . . . . . . . . . . . . . . . 43 Windows Vista™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Using an External M onitor as Y our Pr imary Display: Swappi ng Primary and Secondar y Display s .
4 Contents Extended Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Installing a PC Card o r ExpressCard . . . . . . . . . . . . . . . . . . . . . . . 55 PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 5 Drive Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 CD and DVD drive problems . . . . . . . . . . . . . . . . . . . . . . . . 70 Hard drive problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 E-Mail, Modem, and Internet Problems .
6 Contents If the display is difficult to read . . . . . . . . . . . . . . . . . . . . . . . 84 If only part of the display is readable . . . . . . . . . . . . . . . . . . . . 84 11 Sy stem Setup Program Overview . . . . . . . . . . . . . . . . . . . .
Contents 7 T urning Off Y our Computer . . . . . . . . . . . . . . . . . . . . . . . . . 99 Before W orking Inside Y our Computer . . . . . . . . . . . . . . . . . . . 99 Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Contents Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Returning Items for W arranty Repair or Credit . . . . . . . . . . . . . . . . 133 Before Y ou Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding Information 9 Finding Information NOTE: Some features or media may be opt ional and may not ship with your compu ter . Some features or media may not be available in certain countries. NOTE: Additional information may ship with your computer .
10 Findin g Informa tion • W arranty information • T erms and Conditions (U.S. o nly) • Safety instruc tions • Regulatory inform ation • Er gonomics inform ation • End User Li cense Ag ree.
Finding Information 11 • Solutions — T roubleshooting hints and tips , articles from technician s, and online courses, frequently ask e d questions • Community — Online discussion wi th other .
12 Findin g Informa tion • How to use W ind ows XP and W indows Vista™ • How to work with program s and files • How to personalize my desktop Windows Help and Support Center 1 Click Start or → Help a nd Suppo rt . 2 T ype a word or phrase that desc ribes your problem and click the arrow icon.
About Y our Computer 13 About Y our Computer Fr o n t V i ew DISPLAY LATCH — Keeps the display closed. DISPLAY — F or more information about your display , see "Using the Display" on page 41.
14 About Y our Computer POWER BUTTON — Press the power button to turn on the computer or exit a power ma nagement mode (see "P ower Management Modes" on page 31). NOTICE: T o avoid losing data, turn off your c omputer by performing a Microsoft ® Windows ® operating sy stem shutdown rather than by pressing the power button.
About Y our Computer 15 If the computer is connected to an electric al outlet, the light operate s as follows: – Solid green: The battery is char ging . – Flashing green: The battery is almost fully char ged. – Off: The battery is adequately charged (or e xternal power is not available to char ge the battery).
16 About Y our Computer KEYBOARD STATUS LIGHTS The green li ghts located above the keyboard indicate the followi ng: VOLUME CONTROL BUTTONS — Press these buttons to adjust the speak er volume. MUTE BUTTON — P ress this button to turn off the speakers.
About Y our Computer 17 Le f t S i de V ie w SECURITY CABLE SLOT — Lets you attach a commercially available antitheft device to the computer . F or more information, see "Security Cable L ock" on page 59. NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot.
18 About Y our Computer AUDIO CONNECTORS E XPRESS C ARD SLOT — Supports 34- and 54-mm PCI Expr essCards or US B-based ExpressCards (see "Using Cards" on page 55). WIRELESS SWITCH — T urns on/off wir eless devices such as WiF i and internal cards with Bluetooth wireless technology and scans for W iF i networks.
About Y our Computer 19 WIRELESS SWITCH POSITIONS W I -F I C ATCHER ™ LIGHT — The light operates as follows: – Flashing green: Searching for networks – Solid green: Stro ng network found – S.
20 About Y our Computer USB CONNECTORS Connect USB devices, su ch as a mouse, keyboard, or printer ..
About Y our Computer 21 Back View CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vent s. Do not store your computer in a low-airflow environment, such as a closed briefcase, while it is runni ng. Restricting the airflow can damage the computer or cause a fire.
22 About Y our Computer MODEM CONNECTOR (RJ-11) SERIAL CONNECTOR VIDEO CONNECTOR AC ADAPTER CONNECTOR — Connects an AC adapter to the computer . The AC adapter converts AC pow er to the DC power requir ed by the computer . Y ou can connect the AC adapter with your computer turned either on or off.
About Y our Computer 23 NOTICE: When you disconnect the AC adapter cable from the computer , grasp the connector , not the cable itself, and pull firmly but gently to avoid damag ing the cable. When you wrap the AC adapter cab le, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the cable.
24 About Y our Computer page 107). DOCKING - DEVICE CONNECTOR — Lets you attach your computer to the Media Base or other docking device. See the Dell documentation that came with your docking device for more informat ion.
25 T ransferring Information to a New Computer The Microsoft ® Wi n d o w s ® operating system provides the F iles and Settings T ransfer W izard to move data from a source computer to a new co mputer .
26 4 On the F iles and Settings T ransfer Wizard welcome screen, click Next . 5 On the Which computer is this? screen, click Old Computer and click Next . 6 On the Select a transfer method screen, click the transfer method you prefer . 7 On the What do you want to transfer? screen, select the items you want to trans fer and click Next .
27 6 On the Select a transfer method screen, click the transfer method you prefer . 7 On the What do you want to transfer? screen, select the items you want to trans fer and click Next . After the information has been copied, the Completing the Collection Phase screen appears.
28.
Using a Battery 29 Using a Battery Battery Performance NOTE: For information about the Dell warranty for your computer , see the Product Information Guide or separate paper warranty document that shipped with your computer .
30 Using a Battery CAUTION: Misuse of the battery may increase the risk of fi re or chemical burn. Do not puncture, incinerate, disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children. Handle damaged or leaking ba tteries with extreme care.
Using a Battery 31 Check the Battery Health NOTE: Y ou can check battery health in one of two way s: by using the charge gauge on the battery as described below and by using the Battery Meter in Dell QuickSet. Fo r information about QuickSet, right-click the QuickSet icon in the Microsoft® Windows® taskbar , and click Help .
32 Using a Battery •C l i c k Start → Shut Down → Stand by . or • Depending on how you set the powe r management options in the P ower Options Properties window or the QuickSet P ower Management Wizar d, u se one of the followi ng methods: – Pr ess the power button.
Using a Battery 33 Configuring Power Management Settings Y ou can use the QuickSet P ower Managemen t W iza rd or W indows P ower Options Properties to configure the power management settings on y our computer . • T o access the QuickSet P ower Management W izard, double-click th e QuickSet icon in the Microsoft ® Wi n d o w s ® taskbar .
34 Using a Battery 1 If the computer is connected to a docking device (docked), undock it. See the documentati on that came with your docking device for instructions. 2 Ensure that the computer is turned off. 3 Slide the battery-bay latch release on the botto m of the computer until the r elease clicks.
Using the Keyboard 35 Using the Keyboard Numeric Keypad Th e nu me ri c key p ad fu n ct io ns l ike th e nu me r ic key p ad on an external k eyboard. Each k ey on the keypad has multiple functions. The keypad numbers and symbol s ar e marked in blue on the right of the keypad keys.
36 Using the Keyboard Display Functions Power Managemen t Microsoft ® Windows ® Logo Key Functions <Fn><F7> Scales between widescr een and standard aspect ra tio video resolutions. <Fn><F8> Switches the video image to the ne xt display option.
Using the Keyboard 37 T o adjust k eyboard operation, such as the charact er repeat rate, click → Control P anel → Pr i n t e rs an d Other Hardware → Ke yb o a r d . F or information about the Control P anel, see the W indows Help and Support Center (click the Start button or the W indows Vista™ Start button → Help and Support .
38 Using the Keyboard Customizing the T ouc h Pad and T rack Stick Y ou can use the Mouse P roperties window to disable the touch pad and track stick or adjust their settings. 1 Click Control P anel → Mouse . F or information about the Control P anel, see the W indows Help and Support Center .
Using Multimedia 39 Using Multimedia Playing CDs or DVDs NOTICE: Do not press down on the CD or DVD tray when you open or close it. Keep the tray closed when you are not using the drive. NOTICE: Do not move the computer wh ile playing CDs or DVDs. 1 P ress the eject button on the front of the drive.
40 Using Multimedia Adjusting the V olume NOTE: When the speakers are muted, you do not hear the CD or DVD playing. V olume Control Window 1 Click the Start button, point to All P rograms ( or Pr o g r a ms ) → Accessories → Entertainment (or Multimedia ), and then click Vo l u m e C o n t r o l .
Using the Display 41 Using the Display Adjusting Brightness When a Dell™ computer is running on battery power , you can conserve power by setting the disp lay brightness to the lowest comforta ble setting by pr essing <Fn> and the up- or down-arrow key on the key bo a rd.
42 Using the Display If you choose a r esolution or color palette that is higher than the display supports, the settin gs adjust automatically to the cl osest supported values.
Using the Display 43 Microsoft ® Windows ® XP 1 Connect the external monitor , TV , or projector to the computer . 2 Click Start → Settings → Control P anel . 3 Under Pic k a c at eg or y , click Appearance and Themes . 4 Under Pick a task... , click the area you want to ch ange, or under or pick a Control P anel icon , click Display .
44 Using the Display Using an External Monitor as Y o ur Primary Display: Swapping Primary and Secondary Display s T o swap your primary and secondary displa y designations (for example, to use your e.
Using the Display 45 The ambient light sensor is disabled when your computer is shipped to you. If you enable the sensor and then use any of the display brightness k ey combinations , the sensor is disabled and the display brightness is increased or dec reased accordingly .
46 Using the Display.
Setting Up and Using Networks 47 Setting Up and Using Networks Connecting a Network or Broadband Modem Cable Before you connect your computer to a network , the computer must have a network adapter installed and a network cable connected to it. 1 Connect the network cable to the network adapte r connector on the back of your computer .
48 Setting Up and Using Networks 2 Select an option under Choose a connection option . 3 Click Next , and then follow the inst ructions in the wizard. Wireless Local Area Network (WLAN) A WLAN is a se.
Setting Up and Using Networks 49 NOTE: If your computer is set to the Classic Start menu option, you can view net work connections by clicking Start → Settings → Network Connections . If Wireless Network Connection does not appear , you may not have a wireless network card.
50 Setting Up and Using Networks • Establish communication between your computer and your wir eless router . • Configure your wir eless router to communicate with your broadband router .
Setting Up and Using Networks 51 1 Click the W indows Vista Start button → Connect T o → Ma nage wireless ne tworks . 2 Double-click a profile to open the wireless network properties scr een.
52 Setting Up and Using Networks NOTE: Even if you are able to make a call from your ce llular phone in a specific geographical location, that location may not necessarily be withi n a cellular -data coverage zone.
Setting Up and Using Networks 53 NOTE: Before you connect to the Internet, you must activ ate Mobile Broadband service through your cellular service provider . For instructions and for additional information about using the Dell Mobile Broadband Card Utility, see the user's guide available through the Windows Help and Support Center .
54 Setting Up and Using Networks Y ou can use Location P rofile Settings to create profiles for ac cessing th e Internet with your computer in your office, home, or other public places with Internet services. General Mobili ty Settings allows you to change the way network connections are handled.
Using Cards 55 Using Cards Card T ypes See "Specifications" on page 123 for information on supported car d types. NOTE: A PC Card is not a bootable device. The PC Card slot has one connector that supports a si ngle T ype I or T ype II card. The PC Card slot supports CardBus technology and e xte nded PC Car ds.
56 Using Cards 2 Slide the card into the slot until the card is completely seated in its connector . If you encounter too much resistance, do not force the card. Check the card orientation and try again. The computer recognizes most cards and automatically loads the appropriat e device driver .
Using Cards 57 The computer recognizes most cards and automatically loads the appropriate devi ce driver . If the configuration program tells you to lo ad the manufacturer's dr ivers, use the floppy disk or CD that came with the card. If you have an adapter , such as the one shown belo w , you can use 34-mm ExpressCards in the PC Car d slot.
58 Using Cards.
Securing Y our Computer 59 Securing Y our Computer NOTE: For information on how to secure your computer while traveling, see "T raveling With Y our Computer" on page 89. Security Cable Lock NOTE: Y our computer does not ship with a security cable lock.
60 Securing Y our Computer 2 Slide the smart card into the smart card slot until the card is completely seated in its connector . The smart card protrudes approximately .5 i nch from the slot. The smart card slot is located below the PC Card slot. If you encounter too much resistance, do not force the card.
Securing Y our Computer 61 NOTE: Some hard drives do not support hard drive passwords. NOTICE: Passwords provide a high level of security for data in your computer or hard drive.
62 Securing Y our Computer The administrator password can be used instead of the primary passwor d. Whenever you are prompted to enter the primary password, you ca n enter the administrator password. NOTICE: If you disable the administrator password, the primary password is also disabled.
Securing Y our Computer 63 • The administrative password will only work to u nlock a hard disk on the computer on wh ich the hard disk password was created. This means a pass word-protected hard disk can not be removed from one computer , placed in a second compute r and be unlocked using the administrative pass word on the second computer .
64 Securing Y our Computer Security Management Software The security management software is designed to util ize four different features to help you secure you r computer: • Log-in management • P .
T roubleshooting 65 T roubleshooting Dell T echnical Update Service The Dell T echnical Update service provides proactiv e e -m a il no t if ic a ti on of s of tw a re a nd h ard wa re updates for your computer . The service is fr ee an d can be customized for content, format, and how frequently you r eceive notifications.
66 T roubleshooting NOTE: Before attempting option B, the com puter must be powered down completely. b P ress and hold the <Fn> k ey wh ile powering the computer on. NOTE: If you see a message stating t hat no diagnostics utility partiti on has been found, run the Dell Diagnostics from the Drivers and Utilities CD .
T roubleshooting 67 2 After you have selected the Test System option from the main menu, the following menu appears. NOTE: It is recommended that you select Extended Test from the menu below to run a more thorough check of devices in the computer .
68 T roubleshooting 5 When the tests are complete, close th e test screen to r eturn to the Main Menu screen. T o exit the Dell Diagnostics and restart the computer , close the Main Menu screen. 6 Remove the Dell Drivers and Utilities CD (if applicable).
T roubleshooting 69 • Access the help file for the Dell Support Utility • View f requently ask ed questions • Learn more about the Dell Support Utility • T urn the Dell Support Utility off Dou.
70 T roubleshooting NOTE: Because of different regions worldwide and different disc formats, not all DV D titles work in all DVD drives. Problems writing to a CD/DVD-RW drive C LOSE OTHER PROGRAMS — The CD/D VD-RW drive must r eceive a steady stream of data when writing.
T roubleshooting 71 E-Mail, Modem, and Internet Problems CAUTION: Before you begin any of the procedures in this s ection, follow the safety instructions in the Product Information Guide . NOTE: Connect the modem to an analog telephone connector only .
72 T roubleshooting Error Messages F ill out the Diagnostics Checklist (see "Diagnostics Ch ecklist" on page 135) as you complete these checks. CAUTION: Before you begin any of the procedures in this s ection, follow the safety instructions in the Product Information Guide .
T roubleshooting 73 Diagnostics (see "Dell Diagnostics" on page 65). H ARD - DIS K DRIVE CONTROLLER FAILURE 0— The hard drive does not respond to commands from the computer . Shut down the computer , remove the hard drive (see "H ard Drive" on page 100), and boot the computer from a CD.
74 T roubleshooting faulty or improperly seated. Reinstall the memory module s (see "Memory" on page 107) and, if necessary , replace them. N O BOOT DEVICE AVAILABLE — The computer cannot find th e hard drive. If the har d drive is your boot device, ensur e that the drive is installed, properly seated, and partitioned as a boot device.
T roubleshooting 75 "Dell Diagnostics" on page 65). X : IS NOT ACCESSIBLE . T HE DEVICE IS NOT READY — Insert a disk into the drive and try again. W ARNING : B ATTERY IS CRITICALLY LOW — The battery is running out of charge . Replace the battery , or connect the computer to an electrical outlet.
76 T roubleshooting C HECK THE KEYBOARD CABLE — Shut down th e computer . Disconnect the keybo ard cable and check it for damage, and firmly reconnect th e cable. If you are using a keyboar d extension cable, disconnect it and connect the keyboar d directly to the computer .
T roubleshooting 77 mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off. Then restart your computer . A program st ops responding or crashes re peatedly NOTE: Software usually includes installation instructions in its documentation or on a floppy disk or CD.
78 T roubleshooting with spywar e. Use an anti-virus prog ram that includes anti-spywar e prot ection (your progra m may requir e an upgrade) to scan the compu ter and remove spywar e. F or more information, go to support.dell.com and search for the keywor d spyware .
T roubleshooting 79 C HECK YOUR NETWORK SETTINGS — Contact your network administrator or the person who set up your network to verify that your network settings are corr ect and that the tnetwork is functioning. F or more information on the different types of ne two rks, see "Setti ng Up and Using Networks" on page 47.
80 T roubleshooting up. T EST THE ELECTRICAL OUTLET — Ensur e that the electrical outlet is working by testing it with another device, such as a lamp. C HECK THE AC ADAPTER — Check the AC adapte r cable connections. If the AC adapter has a light, ensure that the light is on.
T roubleshooting 81 E NSURE THAT THE PRINTER IS TURNED ON C HECK THE PRINTER CABLE CONNECTIONS — • See the printer documentation for cable connection information. • Ensure that the printer cables are secur ely connected to the printer and the computer .
82 T roubleshooting No sound from integ rated speakers A DJUST THE W INDOWS VOLUME CONTROL — Double-click the speaker icon in the lower -right corner of your screen. Ensur e that the volume is turned up and that the sound is not muted. Adjust the volume, bass, or treble controls to eliminate distortion.
T roubleshooting 83 3 T urn on the computer . 4 At the W indows desktop, use the touch pad to move the cursor around, select an icon, and open it. If the touch pad operates correctly , the mouse may be defective.
84 T roubleshooting R OTATE THE COMPUTER TO FACE A DIFFERENT DIRECTION — Eliminate sunlight glare, which can cause poor picture quality . A DJUST THE W INDOWS DISPLAY SETTINGS — 1 Click Start → Control P anel → Appearance and Themes . 2 Click the area you want to change or click the Display icon.
Sy stem Setup Program 85 Sy stem Setup Program Overview NOTE: Y our operating sy stem may automatically configure most of the options available in the sy stem setup program, thus overriding options that you set th rough the sy stem setup program.
86 Sy stem Setup Program In the system setup program, primary categories of settings ar e listed on the left. T o view the types of settings in a category , highlight th e category and press <Enter>. When you highlight a setting type, the right side of the scr een displays the value for that setting type.
Sy stem Setup Program 87 2 If the computer is connected to a docking device (docked), undock it. See the documentati on that came with your docking device for instructions. 3 Connect the computer to an electrical outlet. 4 T urn on the computer . When the DELL logo appears, pres s <F12> immediately .
88 Sy stem Setup Program.
T raveling With Y our Computer 89 T raveling With Y our Computer Identifying Y our Computer • Attach a name tag or business card to the computer . • W rite down your Service T ag and stor e it in a safe place a way from the computer or carrying case.
90 T raveling With Y our Computer • Consider changing your power man agement opti ons to maximize battery operating time (see "Configuring P ower Management Settings" on page 33).
Reinstalling Software 91 Reinstalling Software Drivers What Is a Driver? A driver is a program that controls a device such as a printe r , mouse, or k eyboa rd. All devices r equi re a driver program. A driver acts like a translator betw een the device and any other programs that use the device.
92 Reinstalling Software Scroll down the list to se e if any device has an ex clamation poin t (a yellow circle with a [ !] ) on the device icon. If an ex clamation point is next to the device name, you may need to try "Reinstalling Drivers and Utilities" on page 92.
Reinstalling Software 93 time that you run the CD, it might prompt you to install setup files. Click OK , and follow the instructions on the screen to continue. 3 Fr o m t h e Language drop-down menu in the toolbar , select your preferr ed language for the driver or utility (if available).
94 Reinstalling Software NOTE: The Use r Account Control window may appear . If you are an administrator on the compute r , click Continue ; otherwise, contact your administrator to enter the Device Manager . 3 Double-click the type of device for which you are installing the driver (for example, Aud i o or Vi d e o ).
Reinstalling Software 95 Using Microsoft Windows Sy stem Restore The Microsoft W indows operating systems provides a Sy stem Restore option which allows you to return your computer to an earlier opera.
96 Reinstalling Software Enabling Sy stem Restore NOTE: Windows Vista does not disable Sy stem Restore, rega rdless of available disk space. Therefore, the following steps apply to Windows XP only . If you reinstall W indows XP with le ss than 200 MB of free har d-disk spa ce available, System Restore is automatically disabled.
Reinstalling Software 97 NOTE: The next steps change the boot sequence for one time onl y . On the next start-up, the computer boots according to the devices specified in the sy stem setup program. 4 When the boot device list appears, highlight CD/D V D/CD-R W Drive and press <Enter>.
98 Reinstalling Software.
Adding and Replacing Parts 99 Adding and Replacing Parts Before Y ou Begin This chapter provides procedures for removing and installing the co mponents in your computer .
100 Adding and Replacing Parts NOTICE: Only a certified service technician should perform repairs on your computer . Damage due to servicing that is not authorized by Dell is not covered by your warranty . NOTICE: When you disconnect a c able, pull on its connector or on its pull-tab, not on the cable itself.
Adding and Replacing Parts 101 NOTICE: When the hard drive is not in the computer , store it in pr otective antistatic packag ing. See "Protecting Against Electrostatic Discharge" in the Product Information Guide . 3 Slide the hard drive carrier out of the computer .
102 Adding and Replacing Parts Returning a Hard Drive to Dell Return your old har d drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.
Adding and Replacing Parts 103 Removing and Installing Media Bay Devices NOTICE: T o prevent damage to devices, store them in a sa fe, dry place when they are not installed in the computer . Avoid pressin g down on them o r placing heavy object s on top of them.
104 Adding and Replacing Parts 5 P ush the new device into the ba y until it click s. Hinge Cover CAUTION: Before you begin any of the procedures in this s ection, follow the safety instructions in the Product Information Guide .
Adding and Replacing Parts 105 4 Ease the hinge cover up, moving from right to left, and remove it. 5 T o r eplace the hinge cover , insert the left edge of th e cover into the hinge cover slot, and press from left to right until the c over snaps into place.
106 Adding and Replacing Parts 5 P ull up on the pull-tab to disconnect the keyboard cable connector from the keyboard connector on the system board. NOTICE: T o avoid scratching the palm rest when rep lacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and then secure the keyboard in place.
Adding and Replacing Parts 107 Memory Y ou can incr ease your computer memory by installing memory modules on the system board. See "Specifications" on page 123 for in formation on the memory supported by your computer . Install only memory modules that are intended for your computer .
108 Adding and Replacing Parts NOTICE: Insert memory modules at a 45-degr ee angle to avoid damaging the connector . NOTE: If the memory module is not installed properly, t he computer may not boot properly .
Adding and Replacing Parts 109 2 T urn the computer upside-down, loosen the captiv e screw on the memory module cover , and then remove the cover . NOTICE: T o prevent damage to the memory module connector , do not use tools to spread the memory-module securing clips.
110 Adding and Replacing Parts NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMM A” before you install a module in the connect or labeled “DIMM B.” Insert memory modules at a 45-degree angle to avoid damaging the connector .
Adding and Replacing Parts 111 T o confirm the amount of memory installed in the computer , click Start or → Help and Support → Computer Inform ation . Subscriber Identity Module (SIM) Card CAUTION: Before you begin any of the procedures in this s ection, follow the safety instructions in the Product Information Guide .
112 Adding and Replacing Parts Wireless Local Area Network (WLAN) Cards 1 F ollow the procedures in "Befor e Y ou Begin" on page 99. 2 Remove the hinge cover (see "Hinge Cover" on page 10 4). 3 Remove the keyboar d (see "Keyboar d" on page 105).
Adding and Replacing Parts 113 c Lift the card out of its connector . NOTICE: The card connector is keyed to ensure correct inserti on. If you feel resistance, reinstall the card to realign it in the connector . NOTE: Do not insert a WWAN network card into the WLAN card slot.
114 Adding and Replacing Parts Mobile Broadband or Wireless Wide Area Network (WW AN) Cards 1 F ollow the procedures in "Befor e Y ou Begin" on page 99. 2 Remove the hinge cover (see "Hinge Cover" on page 10 4). 3 Remove the keyboar d (see "Keyboar d" on page 105).
Adding and Replacing Parts 115 c Lift the card out of its connector . NOTICE: The card connectors are keyed to ensure correct insertion. If you feel resistance, reinstall the card to realign it in the connector . 6 Install the card. NOTICE: T o avoid damaging the WWAN card, never place cables on top of or under the card.
116 Adding and Replacing Parts NOTE: If you ordered a FCM car d with your co mputer , the card is alr e ady installed . 1 F ollow the procedures in "Befor e Y ou Begin" on page 99. 2 Remove the hinge cover (see "Hinge Cover" on page 10 4).
Adding and Replacing Parts 117 NOTICE: T o avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer . NOTICE: T o avoid damaging the sy stem board, you must remove the main battery before you begin working inside the computer .
118 Adding and Replacing Parts Coin-Cell Battery CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide . NOTICE: T o avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer .
Adding and Replacing Parts 119 4 Remove the battery cable connector from the connector on the system board. 5 Being careful not to br eak the plastic, slightly raise the corner of the mylar above the battery . 6 While holding the mylar , grasp the battery an d pull it out of the battery compartment.
120 Adding and Replacing Parts.
Dell™ QuickSet 121 Dell™ QuickSet Dell™ QuickSet provides you with easy access to configure or view the fo llowing types of settings: • Network connectivity • P ower management •D i s p l .
122 Dell™ QuickSet.
Specifications 123 Specifications Processor P rocessor type Intel ® Core™ Duo processor Intel ® Celeron ® processor (Japan only) L1 cache 64 KB (internal) L2 cache 2 MB (on die) External bus fr e.
124 Specifications WHQL certification PC/SC Compatibility compatible within a PKI environment Insert/eject cycles certified for up to 100,000 cycles Memory Memory module connector two us er -acces sib.
Specifications 125 W ireless internal WLAN, WW AN, and Bluetooth ® wireless support (if optional car ds are purchased) Video Video type integrated on system boar d or discrete graphics on system boar.
126 Specifications Internal PCI bus/HD A External microphone miniconnector ; stereo headphones/speakers miniconnector Speak er two 4-ohm speake rs Internal speaker amplifier 2- W channel into 4 ohms V olume controls keyboar d shortcuts or program m enus Display T ype (active-matrix TFT) WXGA, WSXGA+, or WUXGA Dimensions: Height 207.
Specifications 127 Keyboard Number of k eys 87 (U.S. and Canada ); 88 (Europe); 91 (Japan) Key t ravel 2.7 mm ± 0.3 mm (0.11 inch ± 0.016 inch) Key spacing 19.05 mm ± 0.3 mm (0.75 inch ± 0.012 inch) Layout QWERTY/AZER TY/Kanji T ouch Pad X/Y position resolution (graphics table mode) 240 cpi Size: Wi d t h 64.
128 Specifications Operating time varies depending on operating conditions and can be significantly reduced under certain power -intensive conditions (see "Battery P erformance" on page 29 f.
Specifications 129 Environmental T emperatu re range: Operat ing 0° to 35°C (32° to 95°F) Storage –40° to 65°C (–40° to 149°F) Relative humidity (maximum): Operat ing 10% to 90% (noncondensing) Storage 5% to 95% (noncondensing) Maximum vibration (using a random-vibration spectrum that simulates user environment): Operat ing 0.
130 Specifications.
Getting Help 131 Getting Help Obtaining Assistance 1 See "T r oubleshooting" on page 65 for i nformation and procedures that pertain to the problem your computer is experiencing. 2 R un the Dell Diagnostics (see "Dell Diagnostics" on page 65 ).
132 Getting Help www .dell.com www .dell.com/ap (Asian/P acific countries only) www .dell.com/jp (Japan only) www .euro.dell.com (Europe only) www .dell.com/la (Latin American a nd Caribbean countries) www .dell.ca (Canada only) Y ou can access Dell Support through the fo llowing websites and e-mail addr esses: • Dell Support websites support.
Getting Help 133 Automated Order -Status Service T o check on the status of any Dell pr oducts that you have ordered, you can go to support.dell.com , or you can call the automated or der-status service. A r ecording prompts you for the information needed to locate and r eport on your order .
134 Getting Help Before Y ou Call NOTE: Have your Express Ser vice Code ready when you ca ll. The code helps Dell’ s automated-support telephone sy stem direct your call more efficiently . Y ou may also be asked fo r your Service T ag (located on the back or bottom of your computer).
Getting Help 135 Contacting Dell F or customers in the United Stat es, call 800- WWW -DELL (800-999-335 5). Diagnostics Checklist Name: Date: Address: Phone number : Service T ag (bar code on the back.
136 Getting Help NOTE: If you do not have an active Inte rnet connection, you can find contac t information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options.
Appendix 137 Appendix Cleaning Y our Computer CAUTION: Before you begin any of the procedures in this s ection, follow the safety instructions in the Product Information Guide . Computer , Keyboard, and Display CAUTION: Before you clean your computer , disconnect the com puter from the electrical outlet and remove any installed batteries.
138 Appendix Cleaning a Non-Optical Mouse 1 Clean the outside casing of the mouse with a cl oth moistened with a mild cleaning solution. 2 T urn the retainer ring on the unders ide of your mouse counterclockwise, and then remove the ball. 3 W ipe the ball with a clean, lint-free cloth.
Appendix 139 Macrovision Product Notice This product incorporates copyri ght protecti on technolog y that is protected by U.S. patents and other intellectual property rights.
140 Appendix Company name: Dell Inc. W orldwid e Regulatory Comp liance & Environme ntal Affairs One Dell W ay Round Rock, TX 78682 USA 512-338-4400.
Glossary 141 Glossary T erms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer . A AC — alternating current — The form of electricity that powers your computer when you plug the A C adapter power cable in to an electrical outl et.
142 Glossary byte — The basic data unit us ed by your computer . A byte is usually equal to 8 bits. C C — Celsius — A temperature measur ement scale where 0° is the fre ezing point and 100° is the boiling point of water .
Glossary 143 unit size or stripe width . DMA — direct memory access — A channel that allows certain types of data transfer between RAM and a device to bypass the processor .
144 Glossary you to use a second monitor as an extension of your display . Also r eferred to as dual display mode . extended PC C ard — A PC Card that e xtends beyond the edge of the PC Card slot when installed. F Fa h r e n h e i t — A temperatur e measurement scale wher e 32° is the fre ezing point and 212° is the boiling point of water .
Glossary 145 components ar e fabricated for use in computer , audio, and video equipment. IDE — integrated device electronics — An interface for mass storage devices in which the controller is integrated into the har d drive or CD drive. IEEE 1394 — Institute of Electrical and Electronics Engineers, Inc.
146 Glossary computer . Because the data in memory is not permanent, it is recommended that you frequent ly save your files while you are working on them, and alway s save your files befor e you shut down the computer . Y our computer can contain several different forms of memory , such as RAM, ROM, and video memory .
Glossary 147 providing a high-speed data path between the processor and devices such as video , drives , and networks. PCI Express — A modification to the PCI interface that boosts the data transfer rate between the processor and the devices attached to it.
148 Glossary system board that k eeps the date and time after you shut down the computer . RT C R S T — r eal-time clock reset — A jumper on the system board of some computers that can often be used for troubleshooting problems.
Glossary 149 resolutions up to 1280 x 1024. SXGA+ — super -extended graphics array plus — A video standard for video car ds and controllers that supports resolutions up to 1400 x 1050. system board — The main circuit board in your computer . Also known as the motherboard .
150 Glossary video resolution — See res ol ut i on . virus — A program that is designed to inconvenience you or to destroy data stor ed on your computer . A virus program moves from one computer to another through an infected disk, softwar e downloaded from the Internet, or e-mail attachments.
デバイスDell PP04Xの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Dell PP04Xをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDell PP04Xの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Dell PP04Xの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Dell PP04Xで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Dell PP04Xを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDell PP04Xの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Dell PP04Xに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDell PP04Xデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。