DemcoメーカーTI110の使用説明書/サービス説明書
ページ先へ移動 of 20
Page 1 OPERA T ORS MANUAL TI1 10 & TI1 10SB T OW DOLL Y T O W -IT ASSEMBLY CALIBRATION OPERATION REPLACEMENT PARTS READ complete manual CAREFULLY BEFORE attempting operation. 08/03 RD20006, Rev 3 DEMCO Dethmers Mfg. Co. 4010 320th St. P .
Page 2 We have discovered 1992 and newer model cars that are too wide in the body area to properly fit on a TI110 - 8' wide tow dolly even though the front tire measurement is less than 70". The 1992 and newer Oldsmobile 88 and 98 are in this category, there may be others.
Page 3 SAFETY SIGN LOCA TIONS Types of safety sign and locations on Tow It are shown in illustration below. Good safety requires that you familiarize yourself with various safety signs, type of warning, and particular function related to that area, that requires your SAFETY AWARENESS.
Page 4 BOL T TORQUE TORQUE DA T A FOR ST ANDARD NUTS, BOL TS, AND CAP SCREWS. T ighten all bolts to torques specified in chart unless otherwise noted. Check tightness of bolts periodically , using bolt chart as guide. Replace hardware with same grade bolt.
Page 5 MAINTENANCE Periodically check all bolts and nuts to ensure proper tension or torque. An occasional drop of oil may be required on the moving parts of the tie down winches. Grease the center pivot pin grease zerk every 1500 miles. Grease the main frame platform skids every 1500 miles.
Page 6 TESTING LIGHTS BEFORE USE 1. Check that the WHITE (ground) wire of the wiring harness is connected to the Tow-It frame and the WHITE (ground) wire is connected to the frame of the towing vehicle.
Page 7 Step 5. With someone safely guiding you, slowly drive ve- hicle onto platform FRONT FORWARD. (Any vehicle mounted on tow dolly must be mounted with front of the vehicle facing forward.) Drive the car forward until the tires touch the ramps. Make sure the tire is aligned to ascend onto the ramps.
Page 8 - Examine winches and straps to make sure they are in good condition. - Check wheel nuts every trip. - Tires must be inflated to recommended pressure by tire manufacturer. - Be certain the safety lock pins lock the strap winches. - Retighten the straps over the tires after the first 5 miles of travel.
Page 9 1. Extent and Duration of this Warranty: Your Demco Tow-It is warranted to be free from defects in materials and workmanship under normal use and service for a period of one year after date of purchase by the original (first) retail owner, or until it is resold or transferred by the original owner.
Page 10 REF. QTY. N O . PART NO. REQíD DESCRIPTION REF. QTY. N O . PART NO. REQíD D E SCRIPTION 5217 Coupler Repair Kit not included for Fulton 5000 lb. coupler Please order replacement parts by PART NO. and DESCRIPTION . 24 25 26 28 33 34 36 37 38 29 35 1.
Page 11 5341 Sure Lube TM Hub Assembly 101 89 90 91 92 93 94 95 96 97 98 99 100 LEFT WINCH SHOWN 3 4 5 6 7 8 9 10 11 12 12 13 14 15 16 17 18 19 20 20 21 22 23 26 27 30 31 32 40 41 41 42 42 43 43 44 44.
Page 12 T OW-IT ASSEMBL Y INSTRUCTIONS Pigtail Brown/Green Brown/Yellow Yellow Brown Green 1. Place the mainframe on blocks or some other sturdy support so that the frame rests approximately 8"-10" off the ground.
Page 13 WHITE Ground BROWN Tail Lights and License Plate Light YELLOW Left Turn and Stop GREEN Right Turn and Stop COLOR CODE FOR WIRING HARNESS harness at the fender pocket, the wire ends SHOULD NOT be stripped. Use the wire connectors to make all contacts.
Page 14 SURGE BRAKE ASSEMBL Y 1 3 4 5 6 9 10 11 11 12 13 14 15 16 17 18 19 16 11 12 8 7 2 11 20 REF. QTY. N O . PART NO. REQíD. DESCRIPTION BRAKE LINES PARTS LIST 21 22 1. 02189 1 Handle Grip 2. 02383 2 36" Safety Chain 3. SB587 1 80" Brake Line 4.
Page 15 5695 - Emergency Lock Cam Replacement Kit 20. ----- 1 7/16î-14UNC x 1 1/4î Hex Head Bolt (Gr. 5) 21 . ----- 1 7/16î-14UNC Lock Nut (Center Punch) 22.
Page 16 REF. PART QTY. NO . N O. REQíD. DESCRIPTION 10" BRAKE CLUSTER PARTS LIST Please order replacement parts by PART NO. and DESCRIPTION. Brake shoe kit can be ordered for one complete axle only.
Page 17 MODEL DA91 ACTUA T OR P ARTS BREAKDOWN 5398 Master Cylinder Repair Kit (gasket 05681 included) 2î Lever Lock Coupler RATED AT 6000# not included REF. N O . PART NO. QTY. DES CR IPTION Model 91 ACTUATOR PARTS LIST 1. 09417 1 6000# 2" Lever Lock Coupler (zinc plated) 2.
Page 18 1. 00059 4 3/8" Flatwasher 2. 02592 8 3/8"-16UNC Nylon Insert Locknut 3. 01888-25 1 Tool Box 4. 00182 1 Small Hair Pin 5. 02717-25 2 Mounting "Z" Bracket 6. 00907 4 3/8"-16UNC x 1" Hex Head Bolt (gr.5) 7. 02759 2 3/8"-16UNC x 3" Square U-Bolt OPTIONAL WINCH KK2TB QTY.
Page 19 1 2 3 - KK2WJ QTY. Optional Wheel Jack w/ hardware Please order replacement parts by PART NO. and DESCRIPTION. OPTIONAL WHEEL JACK WHEEL JACK PARTS LIST * All options may not mount on tow dolly simultaneously.* REF. PART QTY. NO . N O. REQíD.
Page 20.
デバイスDemco TI110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Demco TI110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDemco TI110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Demco TI110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Demco TI110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Demco TI110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDemco TI110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Demco TI110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDemco TI110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。