DenonメーカーAVP-A1HDCI(A)の使用説明書/サービス説明書
ページ先へ移動 of 127
AV SURROUND PRE-AMPLIFIER AVP-A1HDCI Owner’s Manual G raphical U ser I nterface Use this manual in combination with the operating guide displayed on the GUI screen.
I n SAFETY PRECAUTIONS C AU T I O N RISK O F ELECTRIC S HOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
I I • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Eviter des températures élevées. Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère. • Handle the power cord carefully.
Accessories ····················································································· 3 Cautions on Han.
Troubleshooting ······························································ 1 03 ~ 1 07 Specifications ···············.
Connections Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications In addition to the AVP-A1HDCI, the included main remote control unit (RC-1067) can also be used to operate the equipment listed below.
Connections Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications For buttons not explained here, see the page indicated in parentheses ( ).
Connections Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications t u Q4 Q8 Q9 o i Q1 Q0 Q6 Q2 Q3 Q5 Q7 y w q e r q Input signal indicators w Input signal channel indicators These light when digital signals are input.
Connections Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications q W1 i W0 W2 W3 W4 Q9 Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q1 Q0 o i w e r t y u q CONTROL LINK connector ····.
Connections Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications q i w e r t y u o Q1 Q3 Q4 Q2 Q0 Q5 Q6 Q7 Q9 W0 W2 W5 W7 W6 W4 W3 W1 Q8 q Signal transmission i.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications A udio cables Video cables Coaxial digital connections (Orange) Coaxial digit al (75 Ω/oh.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications G Flow of video signals for ZONE2 H • This function automatically converts various formats of video signals input to the AVP-A1HDCI into the format used to output the video signals from the AVP-A1HDCI to a monitor.
0 Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and a monitor.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SPEAKERS XLR RCA SP.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications With HDMI connections, the video and audio signals can be transferred with a single cable.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications • Connect the cables to be used ( v page 9 “Video Conversion Function”). • With HDMI connections, the video and audio signals can be transferred with a single cable.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Record Player • When connecting a record player with an MC cartridge, use a commercially available MC head amplifier or a step-up transformer.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications 47*%&0 065 "6%*0 7*%&0 $0.10/&/57*%&0 : 1 # 1 3 7*%&0 065 065 "6%*0 3 - 065 065 R L R L 015*$"- TV/CABLE Tuner Connect the cables to be used.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Connecting the Recording Components Digital Video Recorder Connect the cables to be used.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications R L R L R L R L 47*%&0 47*%&0 */ 3 - 3 - */ */ 065 "6%*0 "6%*0 7*%&0 7*%&0 */ 065 015*$"- 015*$"- 065 "6%*0 "6%*0 7*%&0 7*%&0 065 065 )%.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications USB Port • In the initial status, USB memory devices can be used by connecting them to the USB port on the front panel. • To change the port to be used, see “USB Select” on page 49.
0 Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Antenna terminals An F-type FM antenna cable plug can be connected directly.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Network Audio [Wired LAN] [Wireless LAN] To WAN side Internet Router Computer To LAN po.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Multi Zone ZONE2 or ZONE3 Pre-out Connections • If another power amplifier or pre-ma.
Getting Star ted Setup Playbac k Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications NO TE • Insert the AC plugs securely. Incomplete connections could cause noise. • Only use the AC outlets to plug in audio devices. Do not use them as power supplies for hairdryers or anything other than audio equipment.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Auto Setup Optimize settings for speakers in use. Some typical examples are described below. AU TO SE TU P 1 2 3 4 5 St ar t RETU RN Pr e- out A ss ig n XL R Out P ol ar it y Co nf ig.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications GUI Menu Map Parameter ( v page 52 ~ 56) Information ( v page 56, 57) n Status • .
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications * M * M Example q Example w ( :Measuring positions) • Audyssey MultEQ ® XT automatically measures the acoustical problems in the listening environment to create the best audio experience for your home theater.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Configuration The speaker system to be measured can be selected ahead of time here. [Selectable items] 9.1 z 1 7.1 z 1 5.1 z 1 9.2 z 2 7.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Error Messages If the auto setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Make detailed settings for various parameters Speaker Setup Use this procedure to set the speakers manually or if you wish to change the settings made with the auto setup procedure .
0 Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Distance measurement Select the speaker you want to set, then set the distance. Set the value closest to the measured distance. [Variable range] 0.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications j Surround Speaker Select surround speakers to use for each surround mode. Operating from the main remote control unit Press the SPKR button.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications HDMI Setup Make settings for HDMI video/audio output. F Menu tree F Manual Setup HDMI Setup a Color Space s RGB Range d Aut o Lip S ync f Audio g Monitor Out h HDMI Control a Color Space Make settings for output color space.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications a EXT. IN Setup Setup playback method for analog signals inputted from external input connectors (EXT. IN). Audio Setup Make settings for audio playback.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications d Downmix Option Set dyn amic ra nge for dow nmi x pl ayb ack of Dolb y D igit al sour ces . [Selectable items] ON OFF • Set this to “ON” if the sound from the front speakers seems distorted.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Network Setup Make network settings. F Menu tree F Manual Setup Networ k Setup a Networ k Setup s Other d Networ k Infor mation 1 Connect the LAN cable ( v page 21).
Getting Star ted Connections Setup Playback Remote Control Multi-Zone Infor mation T r oubleshooting Specifications Setup b If the access points are not detected automatically, use the i but ton to select the “Manual” and press the ENTER but ton.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications r Use the ui but ton to select the Security and press the i but ton. [Selectable items] None : Select if not encrypted. Can also be used even without encryption, through we recommend encryption for improved security.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications n Proxy settings Make this setting when connecting to the Internet via a proxy server. q On the GUI menu, select “Manual Setup” – “Network Setup” – “Network Setup” – “Detail” and press the ENTER but ton.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Zone Setup Make settings for audio playback in a multi-zone system. F Menu tree F Manual Setup Zone Setup a ZONE2 s ZONE3 d OSD a ZONE2 Make settings for audio playback in a ZONE2 system.
0 Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Option Setup Make various other settings.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications s XLR Out Polarity Set to switch the XLR pre-out terminal polarity. d POA Setting Set whe n co nne ctin g t he r ece iver to a P OA- A1HD CI.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Master Volume Master volume display during adjustment. [Selectable items] ON OFF NET/USB / iPod / T uner This sets the time the on-screen display is displayed when an operation is performed.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications A4 Remote ID Set remote control ID.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Notes concer ning use of “Fir mwar e Update ” and “ Add New F eatur e” • In order to use these functions, you must hav e the correct system requirements and set tings f or a broadband Internet connection.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications In pu t So urc e Se le ct io n F Menu tree F Source Select TUNER PHONO CD D VD HDP TV/CBL SA T V CR D VR-1 D VR-2 V .
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Source Select XM a Play d Preset Skip A4 Antenna Aiming g Video h Input Mode j Rena.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications This ca n be se t wh en “i/p Sc aler ” i s se t t o an yth ing oth er t han “OF F”. Aspect This sets the aspect ratio when outputting 480i/576i or 480p/576p input signals from the HDMI output connector.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications l Input Att. Set when replay sound is distorted because the input level is too large. [Selectable items] OFF –6dB A0 Playback Mode (iPod) Make settings for iPod playback.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications A2 Playback Mode Make settings for “NET/USB” playback. [Input source] NET/USB USB Select Select USB port to use. [Selectable items] Front Rear Repeat Make settings for repeat mode.
0 Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Surround Mode HOME THX CINEMA THX surround sound mode to recreate the authentic sound of movie soundtracks.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Input signal Display Dolby Digital Source DOLB Y DIGIT AL (other than 2c h) / DOLB .
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications For details, see page 96. • To cancel, press the PURE DIRECT button on the main unit or the PURE button on the main remote control unit.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications DRC Compress dynamic range (difference between loud and soft sounds). [Selectable items] Auto Low Middle High OFF This can be set in the Dolby TrueHD mode.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Subwoofer Att. Attenuate subwoofer level when using EXT. IN input. [Selectable items] ON OFF Set this to “ON” if the subwoofer channel level seems too high when playing Super Audio CD.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications About the REST ORER function • Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AA C reduce the amount of dat a by eliminating signal components that are hard for the human ear to hear .
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications Information a MAIN ZONE Shows information about settings for MAIN ZONE. The items displayed differ according to the input source. s ZONE2/3/4 Shows information about settings for multi-zone.
Getting Star ted Connections Playbac k Remote Control Multi-Zone Information T roubleshooting Specifications A ut o Sur round Mode Shows inf ormation about auto surround mode set tings. The surround mode f or whic h the last memor y function was used f or the dif f erent input signal types is displayed.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications <ON/ST ANDBY> <POWER> <PHONES> SOURCE SELECT MASTER VOLUME SOURCE S.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Presetting Radio Stations (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset.
0 Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Program Type (PTY) PTY identifies the type of RDS program.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications [SEARCH] [NUMBER] [ d f ] uiop ENTER [SA T TU] (AMP mode) [ TU] [SEARCH] [CHANNEL] [TUNER] op [ TU] 1 Either turn <SOURCE SELECT> or press [TUNER] (AMP mode) to select “TUNER”.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications 1 Either turn <SOURCE SELECT> or press [SAT TU] (AMP mode) to select “XM”. : ”Sour ce Select” ( v page 45) 2 To operate using the main remote control unit, set the remote control unit to the TUNER ( ) mode.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications <SOURCE SELECT> <ON / ST ANDBY> <ST A TUS> ui About the button name.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Check the HD Radio Reception Information Press <STATUS> while an HD Radio broadcast is being received. The current reception information is shown on the display.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications <ST A TUS> ENTER uio p uiop [SEARCH] [CHANNEL +/−] ENTER [ 8 ] , [ 9 ] , [ 6 .
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications n USB memory devices A USB memory device can be connected to the AVP-A1HDCI’s USB port to play music and still picture (JPEG) files stored on the USB memory device.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications To pause During playback, press ENTER . Press again to resume playback. To stop During the play or pause mode, press and hold ENTER . Searching up or down pages Press [SEARCH] , then press o (down) or p (up).
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications 1 Press [MEMO] while the Internet radio station you want to register is playing. 2 Use ui to select “Favorites”, then press ENTER .
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Playing Files Stored on USB Memory Devices Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on the AVP-A1HDCI.
0 Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications NO TE • The AVP-A1HDCI is equipped with two USB ports, one each on the front and rear panels. It is not possible to use the set with USB memory devices connected to both the ports at the same time.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Operating the A VP -A1HDCI Using a Browser (Web control) This function lets you operate the A VP -A1HDCI using Internet Explorer.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications [Example 4] PD A menu screen NO TE You cannot change setup menu operations and zone name on the PDA menu screen. [Example 5] Net A udio operating screen Select to operate each zone.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications <ZONE2/3/4 / REC SELECT> <PHONES> <SOURCE SELECT> About the button .
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications Convenient Functions HDMI Control Function When connecting the AVP-A1HDCI to a television or player compatible with the HDMI control function, the following operations are possible.
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications CH SELECT <POWER> <ST ANDARD> <HOME THX CINEMA> QUICK SELECT uio p .
Getting Star ted Connections Setup Remote Contr ol Multi-Zone Infor mation T roubleshooting Specifications 1 T urn off the power using <POWER> . 2 Press <POWER> while simultaneously pressing <ST ANDARD> and <HOME THX CINEMA> .
Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications R em o t e C o n t r o l U ni t O p e r a t i o ns Main Remote Control Unit • On the main remote control unit, the display switches according to the device being operated and the mode.
Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications [MENU] [MODE SELECTOR] [CH + / SHUFFLE], [CH – / REPEA T] [SETUP/ SEARCH] [ENTER] [RETURN].
Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications [MENU] [CH +/–] [TV/VCR] [ENTER] [DISPLA Y] [0 ~ 9, +10] [ uiop ] [SETUP] [ 1 ], [ 8 9 ], .
0 Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications Setting the Remote ID When using multiple DENON AV receivers in the same room, make this setting so that only the desired AV receiver operates. 1 Press [AMP] to set the main remote control unit to the AMP mode.
Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications System Call Function This function lets you register a series of operations at a single button.
Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications 1 Press [MODE SELECTOR] for the device you want to reset. 2 Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications S u b R e m o t e C o n t r o l U n i t O p e r a t i o n s • The sub remote control unit is equipped with frequently used buttons, so it can be used for simple remote control unit operations.
Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications Device operated SA T TU (XM) NET / USB iPod Zone selection M Z2 Z3 Z4 M Z2 Z3 Z4 M Z2 Z3 Z4 .
Getting Star ted Connections Setup Playback Multi-Zone Infor mation T roubleshooting Specifications [USB] [ALL MUSIC/ FA VORITES] [ZONE SELECT] [ZONE OFF] [MENU] [RANDOM] [REPEA T] [ADV ANCED SETUP] 1 Press [ZONE SELECT] . The currently selected multi-zone indicator lights.
Getting Star ted Connections Setup Playback Remote Control Information T r oubleshooting Specifications Multi-Zone Connections and Operations Connectors for audio output Audio signals Connecto.
Getting Star ted Connections Setup Playback Remote Control Information T r oubleshooting Specifications Multi-Zone Operations Turning the Power On and Off G Operation on the main unit H Press <ZONE2 ON/OFF> , <ZONE3 ON/OFF> or <ZONE4 ON/OFF> for the zone to be operated.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Surround back speakers The THX Surround EX format adds new “Surround Back” (SB) channels to the conventional 5.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications G 2 H When not using surround back speakers Subwoofer Surround speakers Monitor Center spe.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Dolby Pro Logic g x Dolby Pro Logic g x is a further improved version of the Dolby Pro Logic g matrix decoding technology. Audio signals recorded in 2-channels are decoded to achieve a natural sound with up to 7.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Adaptive Decorrelation™ In a movie theater, a large number of surround speakers help create an enveloping surround sound experience, while in a home theater there are usually only two speakers.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Audyssey HDCD ® is an encoding/decoding technology that greatly reduces the distortion th.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications HDMI (High-Definition Multimedia Interface) HDMI is a digital interface standard for next generation TVs based on DVI (Digital Visual Interface) standards and optimized for use in consumer equipment.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Surround Mode Signals and adjustabilit y in the dif f erent modes Parameter (def ault valu.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Button Note Input signals ANALOG LINEAR PCM / W A V WMA (Windows Media Audio) / MP3 / MPEG.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Button Note Input signals ANALOG LINEAR PCM / W A V WMA (Windows Media Audio) / MP3 / MPEG.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Button Note Input signals ANALOG LINEAR PCM / W A V WMA (Windows Media Audio) / MP3 / MPEG.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Windows Media Player ver.11 vTuner This is a free online contents server for Internet radio. Note that usage fees are included in upgrade costs.
Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications WPA (Wi-Fi Protected Access) This is a security standard established by the Wi-Fi Alliance.
00 Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Video Conv ert Input signal Monitor output Monitor output (when GUI menu displa yed) HDMI C.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Video Convert Input signal Monitor output (Normally) Monitor output (when GUI menu displa.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone T roubleshooting Specifications Input signal Monitor output S-VIDEO VIDEO VIDEO A A A A S S (VIDEO) S A S (S-VIDEO) S S S.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Infor mation Specifications If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Infor mation Specifications Sympt om Cause Count er measur e P age No sound is produced from center speaker . • Y ou are pla ying a monaural source (TV , AM radio broadcast, etc.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Infor mation Specifications Sympt om Cause Count er measur e P age When a USB memor y device is connected, “USB” is not display ed on the GUI menu. • The set cannot recogniz e a USB memor y device.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Infor mation Specifications Sympt om Cause Count er measur e P age Cannot login to Rhapsody . (“Username or Passw ord is incorrect” is display ed) • Login information is incorrect.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Infor mation Specifications G XM Satellite Radio H Sympt om Cause Countermeasur e P age ”NO SIGNAL ” is display ed. • The signal cannot be received. • Reposition your XM Mini-T uner and Home Doc k antenna.
0 Getting Star ted Connections Setup Playback Remote Control Multi-Zone Infor mation T r oubleshooting n HD Radio section [FM] [AM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 1 0 -15 W) Receiving Rang e: 87 .5 MHz ~ 1 07 .9 MHz 530 kHz ~ 1 71 0 kHz Usable Sensitivity: 1 .
PRESET CODE List of pr eset codes Denon Amp D Denon 81001, 82001, 83001, 84001 Denon T uner D Denon (Analog) 52863, 52795, 52800, 52805 Denon (XM Radio) 52864, 52812, 52813, 52814 Denon Digital T .
PRESET CODE T eac 40490, 40393, 40420 T echnics 40029, 40303 T echwood 40303 Thomson 40053 Thorens 40157 Thule Audio 40157 T okai 40420 U Universum 40157, 40053 V Victor 40072 W Wadia 40393 Wards .
Eurocrypt 00455 EuroLine 01251 Europa 00863 Europhon 00299 Eurosky 00262, 00299 Eurostar 00818 Eutelsat 00713 Expressvu 00775, 01775 F Fenner 00713 Ferguson 00455, 01291, 01743 Finlandia 00455 Finlux .
Satstation 01083 Schaub Lorenz 01214 Schneider 00710, 01206, 01251 Schwaiger 00394, 00504, 00863, 01075, 01083, 01111, 01317, 01334, 01412, 01457 SCS 00299 Sedea Electronique 00125, 01206, 01283, 0162.
Akashi 10009, 10860 Akiba 10037, 10218, 10455 Akira 10418 Akito 10037 Akura 10171, 10009, 10037, 10163, 10218, 10264, 10668, 10714, 11037, 11498, 11556, 11982 Alaron 10170 Alba 10009, 10036, 10037, 10.
E Easy Living 11248 Eaton 10060 Ecco 10773 ECE 10037 Edison-Minerva 10487 Elbe 10037, 10217, 10218, 10362, 10610 Elcit 10163 Electroband 10000 Electrograph 11755 Electrohome 10154, 10000, 10463, 10150.
JVC 10054, 10093, 10463, 10053, 10030, 10070, 10036, 10218, 10371, 10418, 10508, 10606, 10650, 10653, 10683, 10731, 11253, 11923 K Kaige 10009, 10264, 10817 Kaisui 10009, 10037, 10217, 10218, 10455 Ka.
Panasonic 10054, 10000, 10156, 10250, 10051, 10236, 10030, 11947, 11946, 11941, 11480, 11310, 11291, 11271, 10853, 10650, 10548, 10508, 10367, 10361, 10226, 10208, 10163, 10108, 10037, 10035 Panavisio.
Strong 11149, 11163 Studio Experience 10843 Stylandia 10217 Sunkai 10218, 10455, 10487, 10610, 10865 Sunstar 10009, 10037, 10264, 10371 Sunwatt 10455 Sunwood 10037 Superla 10217 Superscan 10093, 10864.
E Elfunk 11037 F Ferguson 11037 Finlux 11556 G Goodmans 10587, 11037, 11900 H Hitachi 11960 J JDV 11982 Jensen 11933 K KLH 11962 L Lenco 10587 Logik 11037 Luker 11982 Luxor 11037 M Matsui 11037 Maxim .
S Sharp 11917 Sylvania 11944 Symphonic 11944 T T oshiba 11945 b 3 S Sharp 20807 b 4 A Akai 30899 E Emerson 30821 ESA 30821 M Magnavox 30821 P Panasonic 31362, 31462 R RCA 31132 S Sharp 30630 Superscan.
Luxor 20048, 20047, 20104, 20043, 20046, 20106, 20315 LXI 20037, 20000, 20042, 20067 M M Electronic 20037, 20240, 20000, 20038 Magnadyne 20081 Magnasonic 20037, 20240, 20000, 20278, 21278 Magnavox 200.
TNIX 20037 T ocom 20240 T okai 20037, 20104, 20041 T opline 20348 T oshiba 20081, 20240, 20045, 20000, 20042, 20067, 20043, 20209, 20041, 20352, 20432, 20742, 20845, 21008, 21145, 21972, 21996 T osoni.
Entivo 30503, 30539 Enzer 30784, 30770, 31228 ESA 30821, 31268 EuroLine 30675, 30788, 31115, 31233 F Fenner 30651 Ferguson 30651, 30695, 30713, 30884, 30898, 31695, 31730 Finlux 30672, 30591, 30741, 3.
Salora 30741 Sampo 30752, 31321, 31347 Samsung 30490, 30573, 30744, 30199, 30820, 30899, 31044, 31075, 31635, 31932 Sansui 30784, 30695, 30751, 30763, 30768, 31051, 31228, 31230, 31695, 31832 Sanyo 30.
PRESET CODE D VD pr eset codes / Codes prér églés D VD e Model No. / Modéle numéro 32134 (def ault / déf aut) 30490 D VD-555 D VD-755 D VD-900 D VD-91 0 D VD-955 D VD-1 0 00 D VD-1 200 D .
デバイスDenon AVP-A1HDCI(A)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Denon AVP-A1HDCI(A)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDenon AVP-A1HDCI(A)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Denon AVP-A1HDCI(A)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Denon AVP-A1HDCI(A)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Denon AVP-A1HDCI(A)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDenon AVP-A1HDCI(A)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Denon AVP-A1HDCI(A)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDenon AVP-A1HDCI(A)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
