DenonメーカーAVR-1911の使用説明書/サービス説明書
ページ先へ移動 of 86
A V SURROUND RECEIVER A VR-1 91 1 Owner ’ s Manual Manuel de l’Utilisat eur Manual del usuar io Simple version Version simplifiée Versión sencilla v 3 Basic version Version basique Versión bá.
I I ENGLISH FRANCAIS ESP AÑOL n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
I I I ESP AÑOL FRANCAIS ENGLISH n NO TES ON USE / OBSERV A TIONS RELA TIVES A L ’UTILISA TION / NO T AS SOBRE EL USO WARNINGS AVERTISSEMENTS ADVERTENCIAS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully.
1 ENGLISH Basic version Advanced version Simple version Information Thank you for purchasing this DENON product. To ensure proper operation, please read these owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
2 ENGLISH Cautions on handling • Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
Simple version 3 ENGLISH Basic version Advanced version Information Simple version Simple version (Simple setup guide) Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater. The “Simple version” describes the installation, connection and setup methods for 5.
4 ENGLISH NOTE • Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and – sides touch each other ( v page 77 “Protection Circuit”).
5 ENGLISH Basic version Advanced version Information Simple version Blu-ray Disc player and TV Use only an HDMI (High Definition Multimedia Interface) cable that bears the HDMI logo (a certified HDMI product). Using a cable without the HDMI logo (an uncertified HDMI product) may result in abnormal playback.
6 ENGLISH Set up speakers (Audyssey ® Auto Setup) 1 2 4 5 3 4 The “Simple version” describes the installation, connection and setup methods for 5.1-channel speakers. See page 32 for the installation, connection and setup methods for speakers other than 5.
7 ENGLISH Basic version Advanced version Information Simple version About setup microphone placement • Measurements are performed by placing the setup microphone successively at multiple positions throughout the entire listening area, as shown in G Example q H .
8 ENGLISH Set up speakers (Audyssey ® Auto Setup) Preparation If “Can cel” is s elect ed “Cancel Auto Setup?” is displayed on the TV screen. If “Yes” is selected, “Audyssey Auto Setup” closes.
9 ENGLISH Basic version Advanced version Information Simple version 11 Use ui to select the item you want to check, and then press ENTER . Step4:Check MultEQ Please check the results of the measured item. Distance Check Channel Level Check Crossover Freq.
1 0 ENGLISH Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey Auto Setup. 1 Use ui to select “Parameter Check” and then press ENTER . 2 Use ui to select the item you want to check, then press ENTER .
1 1 ENGLISH Basic version Advanced version Information Simple version Play back disc 1 2 4 5 3 5 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 1 Press BD to switch an input source for a player used for playback.
Basic version 1 2 ENGLISH F Connections v page13 F Playback (Basic operation) v page20 F Selecting a listening mode (Surround mode) v page28 n Refer to the pages indicated below for information on connecting and playing back the various media and external devices.
1 3 ENGLISH Advanced version Simple version Information Basic version Converting input video signals for output (Video conversion function) This unit is equipped with four types of video input connectors (HDMI, Component video, S-Video and video) and two types of video output connectors (HDMI and video).
1 4 ENGLISH Connecting an HDMI-compatible device You can connect up to five HDMI-compatible devices to the unit. HDM I fu nctio n This unit supports the following HDMI functions: • 3D • Deep Color ( v page76) • Auto Lip Sync ( v page57) • x.
1 5 ENGLISH Advanced version Simple version Information Basic version Abo ut A RC (A udio retu rn c hann el) fun cti on The Audio Return Channel in HDMI 1.4 enables a TV, via a single HDMI cable, to send audio data “upstream” to this unit. NOTE • To enable the ARC function,set “HDMI Control” to “ON” ( v page57).
1 6 ENGLISH Connecting a TV • Select the connector to use and connect the device. • For video connections, see “Converting input video signals for output (Video conversion function)” ( v page13). • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page14).
1 7 ENGLISH Advanced version Simple version Information Basic version Connecting a set-top box (Satellite tuner/cable TV) • You can watch satellite or cable TV. • Select the connector to use and connect the device. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page14).
1 8 ENGLISH Connecting a control dock for iPod • Connect a control dock for iPod to the unit to enjoy video and music stored on an iPod. • For a control dock for iPod, use ASD-1R, ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W made by DENON (sold separately).
1 9 ENGLISH Advanced version Simple version Information Basic version Connecting a CD player • You can enjoy CD sound. • Select the connector to use and connect the device.
20 ENGLISH Playback (Basic operation) n Playing a Blu-ray Disc player/DVD player ( v page21) n Playing a CD player ( v page21) n Playing an iPod ® ( v page22) n Tuning in radio stations ( v .
21 ENGLISH Advanced version Simple version Information Basic version Adjusting the master volume Use VOL df to adjust the volume. n When the “Volume Display” setting ( v page59) is “Relative” G Adjustable range H – – – –80.5dB – 18.
22 ENGLISH Playing an iPod ® There are two methods for iPod playback. q Use a DENON Control dock for iPod to play back. You can play back both video, photo and audio. w Connect an iPod directly to the USB port to play back. You can play back audio only.
23 ENGLISH Advanced version Simple version Information Basic version Playing an iPod ® n Viewing photos and videos on an iPod ® in the Remote mode This unit can play back on a TV screen photos and data stored on an iPod equipped with a slide show or video function.
24 ENGLISH Playing an iPod ® 4 Press SEARCH and hold it down for 2 seconds or more to select the display mode. • There are two modes for displaying the contents recorded on the iPod. Browse mode Display iPod information on the TV screen. • English letters, numbers and certain symbols are displayed.
25 ENGLISH Advanced version Simple version Information Basic version Tuning in radio stations Important information n Using the HD Radio™ receiver HD Radio stations offer higher sound quality than conventional FM/ AM broadcasts. It is also possible to receive data services and select broadcasts from among up to eight multicast programs.
26 ENGLISH Tuning in radio stations n Listening to preset stations 1 Press SHIFT to select the memory block (A to G). 2 Press CH + , CH – or 1 – 8 to select the desired preset channel. You can also operate via the main unit. In this case, perform the following operations.
27 ENGLISH Advanced version Simple version Information Basic version Playing a USB memory device Playing back music files recorded on a USB memory device. Important information n USB memory devices A USB memory device can be connected to the USB port of this unit to play music files stored on the USB memory device.
28 ENGLISH Standard playback n Surround playback of 2-channel sources 1 Playing the source ( v page 21 – 27). 2 Press STANDARD to select the surround decoder to play back multichannel sound. • Each time STANDARD is pressed, the surround mode is switched.
29 ENGLISH Advanced version Simple version Information Basic version 3 Select the mode corresponding to the playback contents with the menu “Surround Parameter” – “Mode” ( v page 49) to enjoy your favorite sound mode. Cinema This mode is suited for movie sources.
30 ENGLISH DENON original surround playback 1 Playing the source ( v page 21 – 27). 2 Press SIMULATION to select the surround mode. • Each time SIMULATION is pressed, the surround mode is switched. MULTI CH STEREO This mode is for enjoying stereo sound from all speakers.
Advanced version 31 ENGLISH Basic version Simple version Information Advanced version F Speaker installation/connection (Other than 5.1-channel) v page32 F Playback (Advanced operation) v page36.
32 ENGLISH Whe n 6. 1ch ( Surr ound back spe ake r) i nst alle d FL FR C SB SL SR SW z 1 z 2 Listening position z 1 22˚ – 30˚ z 2 90˚ – 110˚ Whe n Fr ont A /B s peake rs i nsta lle d FR(A) FR(.
33 ENGLISH Basic version Simple version Information Advanced version Connect • For the method of connecting 5.1-channel speakers, see page 4. • For the method of connecting the TV, see page 5. 7.1 -cha nnel (Fro nt he ight spe ake r) c onn ecti on For 7.
34 ENGLISH Connect Fro nt A /B co nnec tion The second set of front speakers can be connected to the SURR. BACK/AMP ASSIGN terminals. In this case, set “Amp Assign” of “Set up speakers” ( v page35) to “Front B”.
35 ENGLISH Basic version Simple version Information Advanced version 1 Set up the remote control unit n Set up the zone mode Press ZONE SELECT to switch the zone mode to “MAIN”. The “MAIN” indicator lights. Press ZONE SELECT n Set up the operation mode Press AMP to set the remote control unit to amplier operation mode.
36 ENGLISH n HDMI control function ( v page36) n Sleep timer function ( v page37) n Adjusting the volume of the speakers ( v page37) n Quick select function ( v page38) n Various memory fu.
37 ENGLISH Basic version Simple version Information Advanced version Convenient functions Sleep timer function The power automatically goes into standby once the set time has elapsed. This is convenient for playing sources while going to sleep. Press SLEEP and display the time you want to set.
38 ENGLISH Convenient functions Quick select function All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same. n Saving the settings 1 Set the items below to the settings you want to save.
39 ENGLISH Basic version Simple version Information Advanced version Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a different room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2.
40 ENGLISH Adj usti ng th e vo lume Use VOL df to adjust the volume. G Adjustable range H – – – –80dB – –40dB – 18dB (When the “Volume Display” ( v page59) setting is “Relative.
41 ENGLISH Basic version Simple version Information Advanced version Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. How to make detailed settings Setting items Number Detailed items Description Page 1.
42 ENGLISH Examples of on-screen display and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. On-screen Display Front Display Description Top men u dis play MENU 1.Audio Adjust 2.Information 3.
43 ENGLISH Basic version Simple version Information Advanced version Inputting characters “Preset Name” ( v page 46), “Rename” ( v page 48), “Zone Rename” ( v page 60) and “Quick Select Name” ( v page 59)can be changed as desired.
44 ENGLISH Keyboard screen n Display of a keyboard input screen 5-4.Rename [DVD ] [a/A] [SP] [ ] [ ] [OK] UVWXYZ’()*+-./:;<=>? [ENT]:Input [RTN]:Cancel [SFT]:a/A [SRCH]:Normal A BCDEFGHIJKLMNO.
45 ENGLISH Basic version Simple version Information Advanced version Ite ms t hat c an b e set wit h th e I nput Se tup proce dure 5-1.Auto Preset Auto Tuning Preset Station Memory Storing Preset Memory Start [ENT]:Start [RTN]:Back 5-2.Preset Skip Block : A A4 FM 93.
46 ENGLISH Input Setup Preset Name Assign a name to a preset memory. Setting items Setting details A1 – G8 Select the preset channel. HD Radio • Up to eight characters can be input. • For character input, see page 43. Default The changed preset name is returned to the default setting.
47 ENGLISH Basic version Simple version Information Advanced version Input Setup Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Setting items Setting details Component Set this to change the component video input connectors assigned to the input sources.
48 ENGLISH Input Setup Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Input Mode Default settings are underlined. The input modes available for selection may vary depending on the input source.
49 ENGLISH Basic version Simple version Information Advanced version Surround Parameter Default settings are underlined. Adjust surround sound parameters. It may not be possible to set this item depending on the input signal. Setting items Setting details Mode Set the play modes for the different surround modes.
50 ENGLISH Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Setting items Setting details Panorama Assign front L/R signal also to surround channels for wider sound. ON : Set. OFF : Do not set.
51 ENGLISH Basic version Simple version Information Advanced version Audio Adjust Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Audyssey Settings Default settings are underlined. Set MultEQ ® , Dynamic EQ ® and Dynamic Volume™.
52 ENGLISH Audio Adjust Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Setting items Setting details Dynamic EQ ® Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics.
53 ENGLISH Basic version Simple version Information Advanced version Audio Adjust Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Manual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker.
54 ENGLISH Manual Setup Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display or other settings. • If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to set MultEQ ® , Dynamic EQ ® and Dynamic Volume™ ( v page51, 52).
55 ENGLISH Basic version Simple version Information Advanced version Manual Setup Setting items Setting details Bass Setting Set subwoofer and LFE signal range playback.
56 ENGLISH Setting items Setting details Channel Level Set the volume of the test tone to be the same when it is output from each speaker. Test Tone Start : Output test tone. • FL / C / FR / SR / SBR z / SBL z / SL / FHL / FHR / SW : Select the speaker.
57 ENGLISH Basic version Simple version Information Advanced version Audio Setup Default settings are underlined. Make settings for audio playback. Setting items Setting details 2ch DIRECT/STEREO Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.
58 ENGLISH Setting items Setting details 2ch DIRECT/STEREO (Continued) Distance FL / Distance FR : Select the speaker. • 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to the speaker. Set so that the difference between the front left speaker and front right speaker distances is 20.
59 ENGLISH Basic version Simple version Information Advanced version Manual Setup Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Option Setup Default settings are underlined. Make various other settings.
60 ENGLISH Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Manual Setup Setting items Setting details Quick Select Name (Continued) Template : The display name can be changed by selecting “Operation” and “Device Name” from the previously set templates.
61 ENGLISH Basic version Simple version Information Advanced version Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu Information Show information about receiver settings, input signals, etc.
62 ENGLISH Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers. Operating AV equipment 1 Press ZONE SELECT to select a zone for operation.
63 ENGLISH Basic version Simple version Information Advanced version Registering preset codes 1 Press ZONE SELECT to switch the zone mode to “MAIN”. The “MAIN” indicator lights. 2 Press AMP to set the remote control unit to amplier operation mode.
64 ENGLISH Registering preset codes Operating components The supplied remote control unit can control a component other than this unit. 1 Switch the input source ( v page 20). 2 Operate the component. • For details, refer to the component’s operating instructions.
65 ENGLISH Basic version Simple version Information Advanced version Operating components Specifying the zone used with the remote control unit When the ZONE SELECT button is pressed, only the set zone can be operated with the remote control unit. 1 Press and hold POWER ON and ZONE/DEVICE ON for at least 3 seconds.
Information 66 ENGLISH F Part names and functions v page67 F Other information v page71 F Troubleshooting v page78 F Specifications v page80 F Index v page81 Information Here, we list various information related to this unit. Please refer to this information as needed.
67 ENGLISH Basic version Advanced version Simple version Information Front panel For buttons not explained here, see the page indicated in parentheses ( ).
68 ENGLISH Rear panel See the page indicated in parentheses ( ). w q e r t y u i Q0 Q2 Q1 Q3 o q ZONE2 connectors ···········································.
69 ENGLISH Basic version Advanced version Simple version Information Remote control unit For buttons not explained here, see the page indicated in parentheses ( ).
70 ENGLISH Operating range of the remote control unit P oint the remote control unit at the remote sensor when operating it. 30° 30° Approx. 23 ft /7 m NOTE The set may function improperly or the re.
71 ENGLISH Basic version Advanced version Simple version Information Other information n Trademark information ( v page71) n Surround ( v page72) n Explanation of terms ( v page76) Trademark information This product uses the following technologies: Manufactured under license from Dolby Laboratories.
72 ENGLISH Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater.
73 ENGLISH Basic version Advanced version Simple version Information Surround Surround mode ( v page28) Surround Parameter ( v page49) Tone z 15 ( v page51) Audyssey Settings z 20 ( v page51) RESTORER z 19 ( v page53) AFDM z 12 ( v page50) S.
7 4 ENGLISH Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Sym bols in t he t able F This indicates the default surround mode.
75 ENGLISH Basic version Advanced version Simple version Information Surround Surround mode ( v page28) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL LINEAR PCM (multi ch) LINEAR PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.
7 6 ENGLISH Explanation of terms A Adobe RGB color / Adobe YCC601 color Like x.v.Color, each of these color spaces defines a palette of available colors that is larger than the traditional RGB color model.
77 ENGLISH Basic version Advanced version Simple version Information DTS NEO:6™ Surround DTS NEO:6™ is a matrix decoding technology for achieving 6.1-channel surround playback with 2-channel sources. It includes “DTS NEO:6 Cinema” suited for playing movies and “DTS NEO:6 Music” suited for playing music.
78 ENGLISH If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below.
79 ENGLISH Basic version Advanced version Simple version Information G HDMI H Symptom Cause/Solution Page No audio is output with HDMI connection. • Check the connection of the HDMI connectors. • When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “Amp”.
80 ENGLISH Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. SURROUND MODE 0 SURROUND MODE 1 ON/ST ANDBY 1 Turn off the power using ON/STANDBY .
81 ENGLISH Basic version Advanced version Simple version Information Ind ex v Numerics 2.1-channel ··················································.
82 ENGLISH Progressive Mode ·············································· 47 Protection circuit ····························.
D&M Holdings Inc. Printed in China 5411 1 041 7 006D www.denon.com.
デバイスDenon AVR-1911の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Denon AVR-1911をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDenon AVR-1911の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Denon AVR-1911の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Denon AVR-1911で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Denon AVR-1911を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDenon AVR-1911の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Denon AVR-1911に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDenon AVR-1911デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。