DenonメーカーCeol Carionoの使用説明書/サービス説明書
ページ先へ移動 of 49
. CEOL carino Computer Audio System N-2 Owner’s Manual You can print more than one page of a PDF onto a single sheet of paper. Contents Connections Playback Setting procedure Tips Appendix 1 Front p.
Accessories 4 Before using the remote control unit 5 Operating range of the remote control unit 6 Features 7 Part names and functions 8 Front panel 8 Display 10 Rear panel 11 Remote control unit 12 Co.
Tips Tips 35 Troubleshooting 36 Resetting to factory settings 41 Appendix Types of playable digital audio input signals 42 Audio signals that can be input to USB-DAC 42 Playing back Bluetooth devices .
Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Before using the remote control unit The remote control unit has a built-in lithium battery. Pull out the insulation sheet before use. . o Replacing the battery 1. Pull out the battery case while pressing the tab. . Battery case Ta b 2. Insert the lithium battery correctly into the battery compartment as indicated.
Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. . Appro x. 7 m 30° 30° Contents Connections Playback Setting procedure Tips Appendix .
Features 0 Powerful sound with a compact body (25W + 25W high power) You can enjoy music and games with more powerful sound on a computer, smartphone, or tablet.
Part names and functions Front panel . q o y Q0 r t i Q1 w e u A Power button/display ( X ) This turns the power on/to standby. ( v p. 21) The power status is indicated as follows. 0 Power on: Lit 0 Standby: Off B Input source switching key ( W ) This switches input sources.
. o Q0 Q1 y t i u E Headphones jack ( R ) Used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the speaker terminals. NOTE To prevent hearing loss, do not raise the volume level excessively when using headphones.
Display . w e q r A Input source indicator The following is displayed depending on the selected input source. USB-DAC ANALOG IN Bluetooth . . . B Wide Sound indicator Lit when the Wide Sound function is on. C Auto Volume Adjust indicator Lit when the Auto Volume Adjust function is on.
Rear panel . SPEAKERS IMPEDANCE 6 㹼 16 Ȑ OFF ON ANALOG IN USB-DAC SUB WOOFER OUT SPEAKER OPTIMIZATION AC IN R L q t y we r A Speaker terminals (SPEAKERS) Used to connect speakers. ( v p. 17) B Speaker Optimization switch (SPEAKER OPTIMIZATION) This switches the Speaker Optimization function on/off.
Remote control unit . w e r t y u q A Power operation button ( X ) This turns the power on/to standby. ( v p. 21) B Bluetooth button ( V ) This switches the input to Bluetooth. This is also pressed during the paring operation. ( v p. 27) C VOLUME buttons (VOLUME df ) These adjust the volume level.
Installing this unit This unit can be installed in two ways - horizontally or vertically. You can select how to install this unit according to the installation place and your preference. Installing horizontally This orientation is suitable for placing this unit under the monitor when you use a desktop computer.
Installing vertically This orientation is suitable for placing a narrow place such as a place next to a laptop computer. When placing this unit vertically, install as follows with the power button placed on the lower part. . o How to attach the CEOL carino base (for vertical placement) .
Speaker installation You can use the speaker base to place the speaker in three angles. Adjust to your desired angle for placement. . Speaker (supplied) . 10° Speaker base (supplied) . 20° NOTE 0 You cannot remove the speaker net. 0 Place the speaker and speaker base so that they do not rattle.
Connecting the speaker cables Connect the speaker cable with a rubber tube (red) to the + speaker terminal (red), and the other cable to the - speaker terminal (black). 1 Peel off about 10 mm of sheathing from the tip of the speaker cable, then twist the core wire tightly.
Storing speaker cables in the speaker base You can use the cable winder to wind up the loose speaker cable for organized connections. Cable winders are stored under the speaker bases at the time of shipment.
Connecting devices . SPEAKERS IMPEDANCE 6 㨪 16 ǡ AC IN R L ANALOG IN USB-DAC OFF ON SPEAKER OPTIMIZATION SUB WOOFER OUT USB cable (supplied) Stereo mini plug cable (sold separately) Subw oofer cable (sold separately) Smartphone Subw oofer PC o Computer (recommended system) OS 0 Windows ® Vista, Windows 7, and Windows 8 0 Mac OS X 10.
Connecting the power cord After completing all the connections, insert the power cord into the power outlet. . RS 6 㨪 16 ǡ OFF ON ANALOG IN USB-DAC SUB WOOFER OUT SPEAKER OPTIMIZATION L AC IN P ower cor d (supplied) T o household power outlet (230V , 50/60 Hz) NOTE Do not use a power cord other than the supplied one.
o Contents Basic operation Turning the power on 21 Selecting the input source 22 Adjusting the master volume 22 Playing a device Playing music on a computer (USB-DAC) 23 Listening to music via a analo.
Basic operation . V olume adjustment wheel Display Turning the power on 1 Press X to turn on power to this unit. The power indicator is lit. o Switching power to the standby mode 1 Press X . The power indicator is turned off. You can also press X on the remote control unit for this operation.
Selecting the input source o Selecting USB-DAC or ANALOG IN 1 Touch W to select the input source for playback. The following icon appears on the display. . USB-DAC: Plays back audio on the computer. . ANALOG IN: Plays back the device connected to the ANALOG IN connector.
Playing a device Connect the device you want to play back beforehand. (“Connecting devices” ( v p. 18)) Playing music on a computer (USB- DAC) 1 Turn on power to the computer. 2 Press X to turn on power to this unit. The power indicator is lit. 0 The driver is automatically installed on the computer.
[Mac OS] A Select “System Preferences” in the Apple menu and click “Sound”. . q B Click “Output” and select “CEOL carino” for “Select a device for sound output”.
5 Plays back audio on the computer. The speakers output music from the computer. NOTE 0 Perform operations such as playback and stop by using the player software on the computer.
Listening to music on a Bluetooth device You can listen to music wirelessly by connecting this unit to a Bluetooth device via Bluetooth. o Paring Pairing (registration) is an operation that is required in order to connect a Bluetooth device to this unit using Bluetooth.
o Case 1: Paring with this unit for the first time 1 Turn on the Bluetooth function on the Bluetooth device. 0 For details, see the owner’s manual for your Bluetooth device. . Bluetooth ON 2 Press X to turn on power to this unit. The power indicator is lit.
4 Select “CEOL carino” from the list of devices displayed in the screen on the Bluetooth device. When the paring completes and the Bluetooth connection is established, the indicator on the display, which was flashing, is lit.
o Case 2: Connecting a Bluetooth device that this unit performed paring for before 1 Turn on the Bluetooth function on the Bluetooth device. 0 For details, see the owner’s manual for your Bluetooth device. . Bluetooth ON 2 Select “CEOL carino” from the list of devices displayed in the screen on the Bluetooth device.
o Case 3: Connecting a Bluetooth device with the NFC function via NFC You can just touch this unit with a Bluetooth device to turn on power to this unit and perform paring or establish a connection between this unit and the Bluetooth device. 1 Turn on the NFC function on the Bluetooth device.
o Simultaneously connecting multiple Bluetooth devices (multi point function) This unit can only output music from one connected Bluetooth device, but up to 3 Bluetooth devices can simultaneously be connected. (“Listening to music on a Bluetooth device” ( v p.
Convenient function menu Wide Sound function You can use the Wide Sound function to enjoy more spatial sound. 1 Touch S . appears on the display. Auto Volume Adjust function Music sources on the Internet such as streaming music distribution services and YouTube have various volume levels.
Setting the auto standby mode You can configure this unit to automatically switch to standby when you do not operate this unit for approx. 15 minutes with no audio input. At time of purchase, this mode is set to “On”. . Turning the auto standby mode off 1 Press X on tis unit for 5 seconds or longer.
o Contents Tips I want to turn on power to this unit from a Bluetooth device 35 I want to switch the connection to a different Bluetooth device 35 I want to connect to an NFC enabled device via NFC 35.
Tips I want to turn on power to this unit from a Bluetooth device 0 Once you perform paring between this unit and a Bluetooth device, you can turn on power to this unit by operating the Bluetooth device. Select “CEOL carino” from the list of Bluetooth devices to turn on power to this unit.
Troubleshooting 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section.
o No sound comes out Symptom Cause / Solution Page Audio is not output. 0 Check the connections for all devices. 18 0 Check the sound settings on the computer. 23 0 Insert connection cables all the way in. - 0 Check that the covered part of the speaker cable is not inserted into the speaker terminal.
o Sound is distorted or interrupted, or noise occurs Symptom Cause / Solution Page Sound is distorted or interrupted, or noise occurs. 0 Adjust to an appropriate volume level on this unit and the connected devices. 22 0 Place the device connected via Bluetooth closer to this unit.
o The input source does not switch Symptom Cause / Solution Page Even when I touch the input source switching key ( W ), the input source does not switch. 0 Touch the input source switching key ( W ) with your finger properly. 22 0 Use the input source switching button ( W ) on the remote control unit to switch the input source.
o Operations cannot be performed through the remote control unit Symptom Cause / Solution Page Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 5 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
Resetting to factory settings Perform this when this unit does not operate properly. Various settings are reset to the factory default values. Make settings again. . 1 When this unit is in the standby mode, press X while holding : . “INITIALIZE” appears on the display and this unit restarts.
Types of playable digital audio input signals Audio signals that can be input to USB- DAC Types of audio signals that can be input Input signal specifications Linear PCM Sampling frequency: 44.
Explanation of terms Bluetooth Technology for near field wireless communications. This unit can connect to Bluetooth devices wirelessly. To establish a Bluetooth connection, you must perform paring (registering) beforehand. NFC (Near Field Communication) Technology for near field wireless communications.
Trademark information . The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners.
Specifications o Audio section Rated output: 2-channel 20 W+20 W (6 Ω/ohms, 1 kHz, T.H.D. 0.7 %) Maximum effective output power: 25 W+25 W (6 Ω/ohms, 1 kHz, T.H.D. 10 %) Output connectors: Speaker: 6-16 Ω/ohms (impedance) Headphones: Φ3.5 mm jack Total harmonic distortion rate (1 kHz, 1 W, 6 Ω/ohms): ANALOG IN: 0.
o Bluetooth section Communication system: Bluetooth version 3.0 Transmission power: Maximum 2.5 mW (Class2) Maximum communication range: Approx. 10 m in line of sight * Frequency band: 2.4 GHz band Modulation method: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP 1.
o Dimensions Unit : mm . 120 175 162 7 1 175 201 26 60 67 7 This unit (PMA-N2) . Speakers (SC-N2) 98 81 24 88 125 98 103 98 Max. 139 o Weight This unit (including the CEOL carino base): 1.
Index v A Accessories ..................................................... 4 Adjusting the volume ...................................... 22 Auto Standby ................................................. 33 Auto Volume Adjust function ................
www.denon.com D&M Holdings Inc. 3520 10326 00AD 50.
デバイスDenon Ceol Carionoの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Denon Ceol Carionoをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDenon Ceol Carionoの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Denon Ceol Carionoの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Denon Ceol Carionoで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Denon Ceol Carionoを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDenon Ceol Carionoの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Denon Ceol Carionoに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDenon Ceol Carionoデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。