DenonメーカーDN-M991Rの使用説明書/サービス説明書
ページ先へ移動 of 41
1 MINIDISC RECORDER DN - M991R OPERA TING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D’EMPLOI INSTRUCCIONES DE OPERACION BRUKSANVISNING FOR ENGLISH READERS PAGE 00 6 ~ PAGE 0 41 FÜR DEUTSCHE LESER SEITE.
2 LABELS (for U.S.A. model only) CERTIFICATION THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER JAPPLICABLE AT DATE OF MANUFACTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used.
3 SAFETY INSTRUCTIONS 1 . Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warning – All warnings on the appliance and in the operating instructions should be adhered to.
4 NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERV A TIONS RELA TIVES A L ’UTILISA TION NOTE SULL ’USO / NOT AS SOBRE EL USO / AL VORENS TE GEBRUIKEN / OBSER VERA OBSERV AÇÕES QUANTO AO USO • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack.
5 FRONT P ANEL / FRONTPLA TTE / P ANNEAU A V ANT / P ANEL FRONT AL / FRAMSIDA REAR P ANEL / RÜCKW AND / P ANNEAU ARRIERE / P ANEL TRASERO / BAKSIDA DISPLA Y WINDOW / DISPLA Y -FENSTER / FENET.
6 The DN-M991R MD recorder is a table-top type MD recorder designed for use in broadcast stations, for productions, etc. Recording Functions • Auto Level Rec start This function automatically starts.
7 ENGLISH CONTENTS z PART NAMES AND FUNCTIONS ……………………………8 ~ 11 (1) Front Panel ……………………………………………………8, 9 (2) Rear Panel ……………….
8 ENGLISH 1 P AR T NAMES AND FUNCTIONS (1) Front Panel q Cartridge insertion slot • Insert the cartridge as indicated by the arrow on the top. • Once the cartridge is partially inserted.
9 ENGLISH !6 RS232C/RS422A selector switch • Use this to switch the serial remote connector signal between RS232C and RS422A according to the external controller’s signal. !7 RS232C/RS422A connector • This is a serial remote connector. A personal computer or other external controller can be connected to control the DN- M991R externally.
10 ENGLISH (3) Display Window #0 TRACK NO. indicator • This lights When the track number display shows the selected track number. #1 PROGRAM indicator • This lights when the Program play mode is set.
11 ENGLISH H L H L H L H L H L X H SW. No. $3 PITCH indicator • This lights, When the set play speed is set. $4 FS indicator • This lights when the sampling frequency is displayed on the NEXT number display. $5 TIME MODE indicators • “ELAPSED” lights when the elapsed time is displayed.
12 ENGLISH ABOUT MINIDISCS 2 MiniDiscs allow a maximum of 74 minutes (stereo) of recording and playback in a compact size. There are two types of MiniDiscs: those for playback only, and those for recording and playback. Recordable MiniDiscs • These are magneto-optical discs on which both recording and playback are possible.
13 ENGLISH PLAYBACK PRESET FUNCTIONS AND OPERA TIONS (1) List of Preset Functions • Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared even when the power is turned off.
14 ENGLISH (2) Presetting Procedure • Functions can be preset using the buttons on the front panel. • The presettings can also be set using serial remote signals (RS232C/RS422A). • Presettings can be made when no cartridge is loaded or when in the stop, standby, pause, recording pause or recording monitor mode.
15 ENGLISH (3) Detailed Description of Preset Functions (* = initial setting) 1) “Preset Area (*)” (Three different sets (areas) of presettings can be made and used for different purposes.) * Preset Area1 : Set to preset Area 1. Preset Area2 : Set to preset Area 2.
16 ENGLISH 16) “ RecLv (–**) dB” RecLv (–**) dB : Sound detection level for auto record start function. (–66/*–60/–54/–48/–42/–36) 17) “RecOffset (*)” (Recording can be started before sound detection during auto record start operation.
17 ENGLISH 33) “Program1 OFF (ON)” Program1 OFF (ON) : Store the contents of program 1 when on. (Initial setting – “OFF”) 34) “Program2 OFF (ON)” Program2 OFF (ON) : Store the contents of program 2 when on. (Initial setting – “OFF”) 35) “Program3 OFF (ON)” Program3 OFF (ON) : Store the contents of program 3 when on.
18 ENGLISH BASIC OPERA TION (1) Starting Playback 1 2 Make the presettings according to the usage purpose. (See Page 13.) NOTE: Steps 1, 2 and 3 can be performed in the opposite order. 3 4- 1 Select the play mode. Turn the PLAY MODE switch. Load the cartridge.
19 ENGLISH (3) PLAY/PAUSE and STANDBY/CUE Operations (4) Before Starting to Record (5) Method of Recording on Discs • The operation switches between playback and pause each time the PLAY/PAUSE button is pressed. • When the STANDBY/CUE button is pressed during playback, the pickup returns to the position at which playback was started.
20 ENGLISH (6) Starting to Record 1 2 Set the presettings according to the purpose. (Refer to Page 13.) NOTE: Steps 1 and 2 can also be performed in the reverse order. 3 Set the recording pause mode. Press the REC button. Load the cartridge. Flashing (orange) For a disc on which 3 tracks are already recorded.
21 ENGLISH (8) Starting Recording Automatically by Detecting the Input Level This function makes it possible to start recording by detecting the input signal level. 1 Set the presettings. Make the following settings, referring to “Preset Functions and Operations” on Page 13.
22 ENGLISH (9) Incrementing Track Numbers During recording, track numbers can be incremented either manually or automatically. • Track numbers can be incremented manually in the following three ways: 1) Press the REC button ( 4 ) during recording. This increments the track number.
23 ENGLISH HANDY OPERA TIONS (1) Setting Cue Points With this function, cue points can be set at any positions in tracks then searched for during playback. Up to five cue points can be set per track. 1 In the standby, pause, manual search or play mode: Set the EDIT mode.
24 ENGLISH (2) Direct Search for Cue Points When cue points are stored on a track, they can be used for direct search. 2 Set the cue direct search mode. Press the CUE SEARCH button. NOTE: The cue direct search mode cannot be set if no cue points are stored on the disc.
25 ENGLISH (3) Instantaneous play (Hot Start) Data loading. Set the cartridge and cue or pause at the track for hot start playback. 1 • When the data loading is completed, the STANDBY/CUE button will light and the unit will be set to instantaneous play (Hot Start) standby.
26 ENGLISH PROGRAMMED PLA YBACK • The tracks can be programmed to play in a certain order. • Up to 25 tracks can be programmed. • Programmed playback is performed according to the play mode (single or continuous) and preset finish mode (stop, next, recue or repeat) settings.
27 ENGLISH 5- 1 Inserting a track in the program. Select the position at which to insert a track. Turn the select knob. 5- 2 Set the program insert mode. Press the SEARCH 7 button. 5- 3 Perform the same operations as in steps 4-1 and 4-2 to select the track to be inserted.
28 ENGLISH (4) Presetting Programs • Programs can be stored in the preset memory. When a cartridge for which a program is preset is loaded, the programmed playback mode is set automatically. • Programs can be stored for up to three cartridges. 1 Input the program.
29 ENGLISH EDITING FUNCTIONS There are nine editing functions possible on MDs, as described below. Here we describe these functions briefly. q Cue erase function (erasing cue signals) Cue signals (external control signals) recorded on the disc can be erased without affecting the tracks.
30 ENGLISH (2) Editing Function Select 1 Load the cartridge. 2 Set the edit mode. Press the MODE button. 4 Select the edit function. Turn the select knob. NOTES: • “Cue Erase?” is not displayed if no cue signals is set. • “Divide?”, “Combine?” and “Move?” are not displayed in the stop mode.
31 ENGLISH (4) Erasing Tracks ‹Track erase function› (5) Erasing All the Tracks on the Disc ‹All erase function› 1 Select the track erase function. (see page 30.) Select “Track Erase?” and press the SELECT knob. 3 Erase the select track. Press the REC button.
32 ENGLISH (7) Combining Two Tracks ‹Combine function› 2 Select the tracks to be combined. Use the select knob to set the cue mode at the second of the tracks to be combined. 03Tr 02Tr cue 1 Select the combine edit mode function. (see page 30.) Select “Combine?” and press the SELECT knob.
33 ENGLISH (9) Pitch on the disc ‹Disc’s pitch function› 2 Select the pitch. The pitch can be selected by turning the SELECT knob. 1 Select the disc’s pitch function. (see page 30.) Select “Pitch? **.*%” and press the SELECT knob. 3 Write the pitch on the disc.
34 ENGLISH (10) Inputting (Changing) Names ‹Title function› 1 Select the name input edit item. (see page 30.) Select “Track Name?” or “Disc Name?” and press the SELECT knob. If a name is already set, the name is displayed and the first character flashes.
35 ENGLISH (11) Exit the Edit Mode or Undoing Editing ‹Undo functions› 1 Press the MODE button. • When editing is executed, the message “UTOC Write?” asking you whether or not you want to write the UTOC is displayed. • The edit mode is canceled when editing is not being executed.
36 ENGLISH • Functions of keys to CONNECTING AND OPERA TING A KEYBOARD NOTE: Turn off the power of the DN-M991R before connecting the keyboard. (1) Connecting the Keyboard (2) Keyboard Operations An IBM PC compatible keyboard can be connected and used to control the DN-M991R.
37 ENGLISH • When editing names Esc Tab Ctrl 1234567890 = _! @ # $ % ^ & () _ + QWE R T Y U I O P [ ] {} / Ctrl | ASDFG HJ KL ; ` :" Z Alt Capslock Shift X C V B N M , .
38 ENGLISH RESETTING THE MICROPROCESSOR HANDLING CARTRIDGES Discs are stored inside cartridges, so they can be handled easily without worrying about dust or fingerprints. Be careful of the following in order to keep recordings in optimum condition. • Keep cartridges away from magnets and sources of strong magnetic forces.
39 ENGLISH MESSAGES Messages appear on the display when operating the set. The meanings of the messages are described below. Message Description Indicates that editing was not possible. Indicates that the track number cannot be incremented by pressing the REC button during recording.
40 ENGLISH SYSTEM LIMIT A TIONS (1) Track Number Limits • Up to 255 tracks can be recorded when recording the tracks successively starting from the first track on blank or no-track discs. In the following cases, however, the number of tracks that can be recorded decreases: When editing has been performed.
41 ENGLISH SPECIFICA TIONS GENERAL Type: MiniDisc Recorder Recordable/Playable Discs: Playback: Pre-mastered MDs and recordable MDs Recording: Recordable MDs Recording System: Magneto-optical overwriting system (Magnetic field modulation) Signal Compression System: ATRAC (Adaptive Transform Acoustic Coding) version 4.
デバイスDenon DN-M991Rの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Denon DN-M991Rをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDenon DN-M991Rの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Denon DN-M991Rの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Denon DN-M991Rで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Denon DN-M991Rを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDenon DN-M991Rの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Denon DN-M991Rに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDenon DN-M991Rデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
