DenonメーカーPMA-50の使用説明書/サービス説明書
ページ先へ移動 of 67
. PMA-50 INTEGRATED AMPLIFIER Owner’s Manual You can print more than one page of a PDF onto a single sheet of paper. Contents Connections Playback Setting procedure Tips Appendix 1 Front panel Displ.
Accessories 4 Features 5 High quality 5 High performance 5 Part names and functions 6 Front panel 6 Display 8 Rear panel 9 Remote control unit 10 Connections Connections 11 Installing this unit 12 Ins.
Tips Tips 50 Troubleshooting 51 Resetting to factory settings 58 Appendix Types of playable digital audio input signals 59 D/A Converter 59 Playing back Bluetooth devices 59 Bluetooth communications 5.
Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Features High quality 0 Equipped with a high-quality class D amplifier The amplifier section incorporates DDFA ® technology from CSR. The output stage circuit has a discrete construction which realizes higher S/N and lower distortion compared to conventional class D amplifiers.
Part names and functions Front panel . w i e t y u q r A Power operation button ( X ) This turns the power on/to standby. ( v p. 24) The power status is indicated as follows. 0 Power on: Display lit 0 Standby: Display off B Protection circuit indicator This blinks when the protection circuit has operated.
. i u . Q 0 o G Headphones jack Used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the speaker terminals. NOTE To prevent hearing loss, do not raise the volume level excessively when using headphones.
Display . q w A Input source indicator The following is displayed depending on the selected input source. USB-DAC COAXIAL OPTICAL-1 OPTICAL-2 AUX Bluetooth . . . . . . B Information display Displays items such as information on the audio signal being input or the name of a Bluetooth device.
Rear panel . AUDIO PRE OUT IN RL OPTICAL 2 OPTICAL 1 USB-DAC COAXIAL AUDIO DIGITAL IN SPEAKERS IMPEDANCE : 4 㹼 16 Ȑ AC IN SUBWOOFER q r t we A AC inlet (AC IN) Used to connect the supplied power cord. ( v p. 22) B Speaker terminals (SPEAKERS) Used to connect speakers.
Remote control unit . INPUT SELECT IN PU T SE LE CT VOLUME VOL UME DIMMER DI MM ER SETUP SET UP BACK BA CK POWER PO WER ENTER EN TER y t w q e r u i o A Bluetooth button ( V ) This switches the input to Bluetooth. This is also pressed during the pairing operation.
Connections o Contents Installing this unit 12 Installing horizontally 12 Installing vertically 13 Before using the remote control unit 15 Connecting speakers 17 Connecting to a device with analog aud.
Installing this unit This unit can be installed in two ways - horizontally or vertically. You can select how to install this unit according to the installation place and your preference. Installing horizontally The feet are initially attached to the unit for horizontal installation.
Installing vertically This orientation is suitable for placing a narrow place such as a place next to a laptop computer. . 1 Remove the feet. . 0 Rotate each of the 4 feet counter-clockwise to remove. 2 Insert the supplied caps (silver) into the holes from which the feet were removed.
3 Remove the cap (black). . NOTE Be careful not to damage your nails when removing the caps. If necessary, use a thin-tipped tool to remove the caps. However, be careful not to damage the unit when using tools. 4 Rotate the removed feet clockwise to attach them.
Before using the remote control unit The remote control unit has a built-in lithium battery. Pull out the insulation sheet before use. . o Replacing the battery 1. Insert a pointed object into the hole in the battery case and pull out the battery tray.
Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. . Appro x. 7 m 30° 30° [Horizontal installation] .
Connecting speakers NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable core wires do not protrude from the speaker terminal.
Speaker connection . AUDIO IN RL OPTICAL 2 OPTICAL 1 USB-DAC COAXIAL AUDIO DIGITAL IN AC IN SPEAKERS IMPEDANCE : 4 㹼 16 Ȑ PRE OUT SUBWOOFER wq wq (R) (L) Contents Connections Playback Setting proce.
Connecting to a device with analog audio output connectors This unit can be connected to an analog device such as a CD player. . PRE OUT OPTICAL 2 OPTICAL 1 USB-DAC COAXIAL AUDIO DIGITAL IN SPEAKERS I.
Connecting to a device with digital audio output connectors Use this connection to input digital audio signals to this unit, and convert the signals for playback using the D/A converter of this unit.
Connecting a PC or Mac By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable (supplied), this unit can be used as a D/A converter.
Connecting the power cord Wait until all connections have been completed before connecting the power cord. . USB-D A SPEAKERS IMPEDANCE : 4 㨪 16 ǡ AC IN P ower cord (supplied) T o household power o.
o Contents Basic operation Turning the power on 24 Selecting the input source 25 Adjusting the master volume 26 Switching the display’s brightness 26 Playing a device Playing music on a computer (US.
Basic operation . Display V olume control knob . INPUT SELECT IN PUT SE LEC T VOLUME VOLU ME DIMMER DI MME R SETUP SETUP BACK BA CK POWER POW ER ENTER ENT ER Turning the power on 1 Press X to turn on power to this unit. Turns the display on. o Switching power to the standby mode 1 Press X .
Selecting the input source o Selecting USB-DAC, DIGITAL IN or ANALOG IN 1 Press q to select the input source to be played. The following icon appears on the display. . USB-DAC: Plays back audio on the computer. . COAXIAL: Plays back the device connected to the COAXIAL connector.
Adjusting the master volume 1 Turn the volume control knob to adjust the volume. The volume level appears on the display. 0 You can also press VOLUME df on the remote control unit for this operation. 0 You can adjust the volume level to --- dB (minimum) and between -90 dB and 0 dB.
Playing a device Connect the device you want to play back beforehand. (“Connections” ( v p. 11)) Playing music on a computer (USB- DAC) You can enjoy high-quality audio playback from the D/A converter built in to this unit by inputting music files into this unit from a computer via USB connection.
o Installing the dedicated driver (Windows OS only) n Installing the driver software 1 Disconnect the USB cable between your PC and the unit. 0 The driver software cannot be installed correctly if your PC is connected to the unit by a USB cable.
C The wizard menu is displayed. Click “Next”. . e D Read the Software Licensing Agreement, and click “I accept the terms in the license agreement”.
F Click “Install” on the installation start dialog. 0 The installation starts. Do not perform any operation on the PC until the installation is completed. . y G In the Windows security dialog, select “Always trust software from “DandM Holdings Inc.
I When the installation is completed, click “Finish”. . o 5 With the unit power off, connect the unit and PC using a USB cable (supplied). 0 For the connection procedure, refer to the “Connecting a PC or Mac” ( v p. 21) section. 6 Press POWER X .
9 Checking audio output. Outputs a TEST signal from the PC and checks the audio output from the USB-DAC function. A Select “Digital Audio Interface” and click “Properties”.
o Audio Device Settings (Mac OS X only) A Move the cursor to “Go” on the computer screen, and then click “Utilities”. 0 The utility list is displayed. B Double-click “Audio MIDI Setup”. 0 The “Audio Devices” window is displayed. C Check that “Use this device for sound output” is checked in “PMA-50”.
o Playback Install the desired player software on your computer beforehand. Use the rear panel USB-DAC port to connect this unit to a computer. ( v p. 21) 1 Press q to switch the input source to “USB-DAC”. Start playback on the computer’s player software.
Listening to music via a digital connection (COAXIAL/OPTICAL-1/ OPTICAL-2) 1 Press q to switch the input source to “COAXIAL”, “OPTICAL-1” or “OPTICAL-2”. The digital audio signal that is being input is shown as follows in the display. You can also press INPUT SELECT df on the remote control unit for this operation.
Listening to music via a analog connection (AUX) 1 Press q to switch the input source to “AUX”. 2 Play back music on the connected device. The speakers output music from the connected device.
Listening to music on a Bluetooth device You can listen to music wirelessly by connecting this unit to a Bluetooth device via Bluetooth. o Pairing Pairing (registration) is an operation that is required in order to connect a Bluetooth device to this unit using Bluetooth.
o Case 1: Pairing with this unit for the first time 1 Press X to turn on power to this unit. Turns the display on. . 2 Turn on the Bluetooth function on the Bluetooth device. 0 For details, see the owner’s manual for your Bluetooth device. . Bluetooth ON 3 Press V for 3 seconds or longer.
4 Select “Denon PMA-50” from the list of devices displayed in the screen on the Bluetooth device. When pairing is complete and the device is connected via Bluetooth, the device name appears on the display of this unit.
5 Play back music on the Bluetooth device. The speakers output music that the Bluetooth device is playing back. 0 Adjust to the appropriate volume level. 0 When the pairing fails, retry from step 3. 0 To perform pairing for another Bluetooth device, repeat steps 2 to 5 for each device you want to perform pairing for.
o Case 2: Connecting a Bluetooth device that this unit performed pairing for before 1 Turn on the Bluetooth function on the Bluetooth device. 0 For details, see the owner’s manual for your Bluetooth device. . Bluetooth ON 2 Select “Denon PMA-50” from the list of devices displayed in the screen on the Bluetooth device.
o Case 3: Connecting a Bluetooth device with the NFC function via NFC You can just touch this unit with a Bluetooth device to turn on power to this unit and perform pairing or establish a connection between this unit and the Bluetooth device. 1 Turn on the NFC function on the Bluetooth device.
o Simultaneously connecting multiple Bluetooth devices (multi point function) This unit can only output music from one connected Bluetooth device, but up to 3 Bluetooth devices can simultaneously be connected. (“Listening to music on a Bluetooth device” ( v p.
o Switching the playback device 1 Stop or pause the device that is currently played back. 2 Play back the device that you want to output music from. Turn the power of this unit to standby before turning the Bluetooth function of the Bluetooth device off.
Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. Setting items Description Page Source Direct Sets the tone adjustment.
. INPUT SELECT IN PU T SE LE CT VOLUME VOL UME DIMMER DI MM ER SETUP SETU P BACK BA CK POWER PO WER ENTER EN TER SETUP BACK uio p ENTER o Menu operation 1 Press SETUP. The menu is displayed on the display. 2 Use ui to select the menu to be set or operated, then press ENTER.
Source Direct Set whether to adjust the tone. Off (Default) : Adjusting the tone. On: Tone is not adjusted. Tone adjustments (Bass, Treble, Balance) are disabled. Bass Adjusts the bass sound. –8dB – +8dB (Default : 0dB) Treble Adjusts the treble sound.
Bluetooth Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. On (Default) : Enables the Bluetooth function. Off: Disables the Bluetooth function. When Bluetooth is “Off”, the input source cannot be switched to Bluetooth.
o Contents Tips I want to turn on power to this unit from a Bluetooth device 50 I want to switch the connection to a different Bluetooth device 50 I want to connect to an NFC enabled device via NFC 50.
Tips I want to turn on power to this unit from a Bluetooth device 0 Once you perform pa i ring between this unit and a Bluetooth device, you can turn on power to this unit by operating the Bluetooth device. Select “PMA-50” from the list of Bluetooth devices to turn on power to this unit.
Troubleshooting 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section.
o Power does not turn on / Power is turned off Symptom Cause / Solution Page Power does not turn on. 0 Check whether the power cord is correctly inserted into the power outlet. 22 0 Check the connection between this unit and the power cord. 22 0 This unit is in the standby mode.
o No sound comes out Symptom Cause / Solution Page Audio is not output. 0 Check the connections for all devices. 17 0 Check the sound settings on the computer. 27 0 Insert connection cables all the way in. - 0 Check that the covered part of the speaker cable is not inserted into the speaker terminal.
o Sound is distorted or interrupted, or noise occurs Symptom Cause / Solution Page Sound is distorted or interrupted, or noise occurs. 0 Adjust to an appropriate volume level on this unit and the connected devices. 26 0 Place the device connected via Bluetooth closer to this unit.
o Files on a computer cannot be played back Symptom Cause / Solution Page This unit is not recognized on the computer. 0 Reconnect the USB cable to the USB port on your computer. When this unit is still not recognized after reconnection, connect to a different USB port.
o Audio from digital devices cannot be played back (Coaxial/Optical) Symptom Cause / Solution Page “Unlocked” is displayed. 0 When digital audio signals cannot be detected properly, “Unlocked” is displayed. 35 “Unsupported” is displayed. 0 “Unsupported” is displayed when audio signals that are not supported by this unit are input.
o Operations cannot be performed through the remote control unit Symptom Cause / Solution Page Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 15 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
Resetting to factory settings Perform this when this unit does not operate properly. Various settings are reset to the factory default values. Make settings again. . 1 When this unit is in the standby mode, press X while holding q . “INITIALIZE” appears on the display and this unit restarts.
Types of playable digital audio input signals D/A Converter o Compatible formats n USB-DAC Sampling frequency Bit length DSD (2-channel) 2.8/5.6 MHz 1 bit Linear PCM (2-channel) 32/44.1/48/88.2/96/ 176.4/192 kHz 16/24 bits n Coaxial/Optical Sampling frequency Bit length Linear PCM (2-channel) 32/44.
Explanation of terms Bluetooth Technology for near field wireless communications. This unit can connect to Bluetooth devices wirelessly. To establish a Bluetooth connection, you must perform pairing (registering) beforehand.
Trademark information . The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners.
Specifications o Audio section 0 Output performance Rated output: both channels driven 25 W+25 W (8 Ω/ohms, 1 kHz, T.H.D. 0.1 %) 50 W+50 W (4 Ω/ohms, 1 kHz, T.H.D. 1.0 %) Output connectors: Speaker: 4-16 Ω/ohms Headphones: Φ6.3 mm jack Total harmonic distortion: 0.
o Bluetooth section Communication system: Bluetooth version 3.0 Transmission power: Maximum 2.5 mW (Class2) Maximum communication range: Approx. 10 m in line of sight * Frequency band: 2.4 GHz band Modulation method: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP 1.
o Dimensions Unit : mm . 200 6 80 86 6 154 30 170 23 23 240 258 18 258 40 o Weight: 2.5 kg Contents Connections Playback Setting procedure Tips Appendix 64 Front panel Display Rear panel Remote Index.
Index v A Accessories ..................................................... 4 Adjusting the volume ...................................... 26 Auto Standby ................................................. 48 v C Computer (recommended system) ..........
.
www.denon.com D&M Holdings Inc. 3520 10369 00AD 66.
デバイスDenon PMA-50の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Denon PMA-50をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDenon PMA-50の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Denon PMA-50の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Denon PMA-50で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Denon PMA-50を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDenon PMA-50の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Denon PMA-50に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDenon PMA-50デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。