DeWaltメーカー50-761の使用説明書/サービス説明書
ページ先へ移動 of 16
INSTRUCTION MANUAL 2 H.P . Dust Collector (Model 50-761) P ART NO. A03570 - 05-12-05 Copyright © 200 5 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582).
2 T ABLE OF CONTENTS SA VE THESE INSTRUCTIONS! IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . .
3 Indicates an imminently hazardous situation which, if not avoided, will r esult in death or serious injury . Indicates a potentially hazardous situation which, if not avoided, could r esult in death or serious injury . Indicates a potentially hazardous situation which, if not avoided, may r esult in minor or moderate injury .
4 GENERAL SAFETY RULES READ AND UNDERST AND ALL WARNINGS AND OPERA TING INSTRUCTIONS BEFORE USING THIS EQUIPMENT . Failure to follow all instructions listed below , may result in electric shock, fire, and/or serious personal injury or pr operty damage.
5 A separate electrical circuit should be used for your machines. This cir cuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. If an extension cor d is used, use only 3-wire extension cor ds which have 3- prong gr ounding type plugs and matching receptacle which will accept the machine’ s plug.
6 EXTENSION CORDS Use proper extension cor ds. Make sure your extension cord is in good condition and is a 3-wir e extension cord which has a 3-pr ong grounding type plug and matching receptacle which will accept the machine’ s plug. When using an extension cord, be sure to use one heavy enough to carry the current of the machine.
7 1. Motor and blower assembly 2. Stand 1 2 Fig. 1 CAR TON CONTENTS 3 4 5 6 7 8 9 3. Dust intake port 4. Cloth-covered bag r etainer ring (2) 5. One micron upper filter bag (2) 6. Six mil plastic lower bag (4) 7. Legs (2) 8. Bag retainer clamp (2) 9. Bag hanging rod (2) Fig.
8 10 11 12 13 14 15 16 17 Fig. 1B 10. Caster (4) 11. Intake cap and ring (3) 12. Bracket for bag hanging rod (2) 13. Knob for attaching legs to blower/motor assembly (4) 14. 3/8” (9.5mm) Lockwasher for attaching casters to stand (4) 15. 5/16” (8mm) Flat washers for attaching legs to blower/motor assembly and for the brackets (6) 16.
9 FOR YOUR OWN SAFETY , DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETEL Y ASSEMBLED AND YOU READ AND UNDERST AND THE ENTIRE INSTRUCTION MANUAL.
10 Fig. 5 Fig. 4 A TT ACHING DUST INT AKE PORTS Place dust intake port (A) Fig. 7 over intake hole (B) opposite the motor . Align four holes (C) in the port with the ones in the motor/blower assembly and fasten with four M4 sheet metal screws. T urn unit over so casters are on the ground.
11 A Fig. 8 Fig. 9 B Fig. 10 Fig. 10A A B B A B A A TT ACHING DUST COLLECTION BAG USING CLOTH COVERED FLEXIBLE RING: 1. T ake cloth-covered bag retainer ring (A) Fig. 8 and place it inside opening of clear plastic dust collection bag. Fold about 6 inches of the bag down around the r etainer ring.
12 Fig. 13 A B C D Fig. 11 Fig. 12 A B A A TT ACHING ACCESSOR Y HOSE TO INT AKE POR T DISCONNECT MACHINE FROM POWER SOURCE BEFORE CONNECTING OR DISCONNECTING HOSE . Model 50-761 provides thr ee 4” dust ports. Proceed as follows for each port with your accessory hoses.
13 FOR OPERA TOR SAFETY , DO NOT OPERA TE THE MACHINE WITH ANY DUST INT AKE HOLES UNCOVERED. THE ROT A TING F AN LOCA TED INSIDE THE BLOWER HOUSING IS ACCESSIBLE THROUGH THE DUST IN-T AKE POR T AND CAN BE HAZARDOUS. AL WA YS WEAR PROPER APP AREL. DO NOT WEAR JEWELR Y AND KEEP FINGERS AND ALL FOREIGN OBJECTS OUT OF THE DUST INT AKE PORT .
14 MAINTENANCE P AR TS, SERVICE OR WARRANTY ASSIST ANCE All Delta Machines and accessories are manufactur ed to high quality standards and ar e serviced by a network of Porter -Cable • Delta Factory Service Centers and Delta Authorized Service Stations.
15 NOTES.
The following are trademarks of POR TER-CABLE • DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE • DEL T A S.A.) (Les marques suivantes sont des marques de fabriquant de la POR TER-CABLE • DEL T A): Auto-Set ® , BAMMER ® , B.O.S.
デバイスDeWalt 50-761の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
DeWalt 50-761をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDeWalt 50-761の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。DeWalt 50-761の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。DeWalt 50-761で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
DeWalt 50-761を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDeWalt 50-761の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、DeWalt 50-761に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDeWalt 50-761デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
