AiwaメーカーCDC-X155の使用説明書/サービス説明書
ページ先へ移動 of 20
mi!!itt DIGITAL AUDIO CDC-X175M ,“ CDC”X155M Y“ STEREO CAR CD RECEIVER RADIO-TOCADISCOS DE CD ESTEREOFONICO PARA AUTOMOVIL OWNER’S RECORD For your convenience, record the model number and serial number (you will find them on the right side of your set) in the space provided below.
Welcome Thank you for your purchasing this AIWAproduct. To optimize the performance of this unit, please read through this manual carefully. In addition to this operating instructions manual, be sure to refer to the separate installation and connections manuals as well.
TABLE OF CONTENTS FRONT PANEL .... .. ..... ... ... ... ....... ...... .. ...... ...... ... .. . . ...... .. ........ ..... ... ....... ...... ... ... ...... ....... .. . ...... .. . . .. .. . .. 3 DETACHING AND AITACHING THE FRONT PANEL . ..... .....
FRONTPANEL Display window @H-BASS button @ PWR (power ontoff) button @ SEL (selsct) bunon @+/- (sudlo control) button @CD button @BAND button @OPEN button @CD CH (CD changer) button* OTUNEMISC* VIA btrttone @ MtJTE button @TAPE IN jack (3.
DETACHING AND ATTACHING THE FRONT PANEL 1 2 You can detach the front panel from the unit and carry it with you when you leave your car unattended. When you carry the front panel out of your. car, use the supplied earring case. 1 Press PWR to turn the unit off.
SELECTING THE COLOR OF THE ILLUMINATION (CDC-X175M only) You can select the color of the illumination between green and amber. Detach the front panel and slide the switch on the back of the front panel to the “G (green) position or “A (amber) position.
RADIO OPERATION PWR 4 1,2 3 You can turn the unit on by pressing any button except OPEN on the front panel. 1 2 3 4 Press BAND to turn the radio on. The radio frequency appears. Press BAND sgsin to select the bsnd from smong F1 (FM1), F2 (FM2), F3 (FM3) snd AM.
PRESETTING STATIONS 21 1 2 Press BAND to selects deeired bsnd from smong FI (FM1), F2 (FM2), F3 (FM3) snd AM. ( 1 Press snd hold A.ME for more thsn 1.5 seconde to activate the eutomatic presetting function. The six stronaest available stations will be stored in memory onthepresetstation buttons 1 to 6 in order of their signal strength.
1 2 1 2 Press BAND to select a desired band from smong F1 (FM1), F2 (FM2), F3 (FM3) and AM, Prese the dasired I)reset station button, The number of the-pressed preset station button appears next to the frequency indication.
Press SEL. MY INFORMATION SWITCH 5,7,9,12 6 4 5 6 7 8 9 Set the time you wieh the unit to turn on in Radio mode. Press TUNE T to set the hour. Press TUNE A to set the minutes. Praas SEL. The “BAND SEL” indication flashes. Prees SEL again. Radio indication flashes.
lf3 2 1 With the unit turned off, press DRV for more thsn 1.5 seconds. The “PROGRAM indication flashes in the display window. Z Press TUNE Y or TUNE A repeatedly until the “PROG ON” indication fleshes.
SOUNLIADJUSTMENTS MUTE button Press this button to temporarily Iowerthevolume. Press it again to restore the previous volume. You can adjust the position of sound stage to best serve a particular seat just by pressing DRV. DRV Press DRV to change the position of sound stage.
CD PLAY 3 21 1 2 3 Press OPEN to open the front psnel and insert a CD. Cloee the front panel and press CD. CD play starts and the track number and elapsed playing time appear. CD indicator Track number J ~ Elapsed playing time Adjust the volume with i- or -.
CD PLAY CD CHANGER PLAY Press INT during CD play. The “SCAN indication lights up and the first 10 seconds of all the tracks on the disc are played in order.
To skip tracks Buttons Press” Press and hold w Skips to the next Advances track rapidly Releases to resume play w Skips back to Reverses the beginning of rapidly the current track Releases to resume play *Press for less than 0.5 second. TO skip diSCS To skip to the next disc, press DISC A.
SETTING THE BEEP TONE The unit is preset at the factory to beep each time you press any button on the front panel except OPEN. You can stop beeping by following the procedure below. 1 2 Press and hold down 1 and 4 at the same time while the unit ie turned on.
TROUBLESHOOTING In the following cases, the corresponding error code indicator appears. Internal CD player: Error code ERROR 03 cause ~ The disc cannot be read properly. The disc may be damaged or dirty. Insert CD Change~ Error code Cause Solution ERROR 01 The disc magazine is not properly Ineerfed in Re-insert the magszine.
SPECIFICATIONS RADIO SECTION (FM) Frequency Range 87.5 MHz-108 MHz (lOo-kHz steps) 87.5 MHz-108 MHz Y-B; steps) Usable Sensitivity 50 dB Quieting Sensifivi~: 17,2 dBf IF Rejection 80 dB Frequency Resp.
.
88-KC4-901 -01 980122BTM-OX Printed in China AIWA CO.,LTD..
デバイスAiwa CDC-X155の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Aiwa CDC-X155をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAiwa CDC-X155の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Aiwa CDC-X155の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Aiwa CDC-X155で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Aiwa CDC-X155を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAiwa CDC-X155の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Aiwa CDC-X155に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAiwa CDC-X155デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
