DVDOメーカーDVD VCR Comboの使用説明書/サービス説明書
ページ先へ移動 of 15
062210 1 DVDO iScan Duo Owner’s Manual Supplement Firmware Version 2.20 (Build 067a) This document provides additional information for the DVDO iScan Duo configured with the latest firmware. It is a supplement to the iScan Duo Owner’s M anual. This release includes improvements/bug fixes in Releases 2.
062210 2 At each IRE setting, in addition to Red, Green and Blue, the on -screen menu includes White-x, White-y, White- Y adjustments. Ma in Menu > Output Setup > Gray Scale > White-x Ma in Menu > Output Setup > Gray Scale > White-y Ma in Menu > Output Setup > Gray Scale > White-Y 2.
062210 3 DVDO iScan Duo Owner’s Manual Supplement Firmware Version 2.10 (Build 062n) This document provides additional information for the DVDO iScan Duo configured with the latest firmware. It is a supplement to the iScan Duo Owner’s M anual. This release includes improvements/bug fixes in Release 2.
062210 4 The TPG automatically generates only the Red primary (75IRE). 5. Enter the measured Red-x value. Note the indicators reflect only the output of the Test Pattern Generator. 6. Select Red-y and enter the measured Red-y value 7. Repeat step 4,5 and 6 with Green-x and Green-y The TPG automatically generates only Green primary (75IRE).
062210 5 480i/240p (treated as one format) 576i/288p (treated as one format) 480 p 576p 720p50 720p60 1080i50 1080i60 1080p24 1080p25 1080p30 1080p50 1080p60 VGA SVGA XGA SXGA The input settings that .
062210 6 The Y/C Delay control shifts the phase of the luminance (Y) with r espect to chrominance (C) in the video signal to correct for delay between Y and C, which causes color smearing in the image. The default setting is 0. This co ntrol is available in the Picture Controls menu.
062210 7 Ma in Menu > Input Adjust > Input Color Space The menu selection is as follows Auto (default) RGB YCbCr 422 YCbCr 444 4.2 Input Colorimetr y This control is for HDMI inputs only.
062210 8 Off The iScan Duo turns off HDCP on its input. This feature speeds up the iScan Duo’s ability to lock onto an input signal when HDCP is not needed. 5. New Configur ation con trol A menu item was added to allow users to control the OSD display.
062210 9 6.2 Mask Level A mask is created when Underscan feature which reduces the output imag e size to less than the maximum display size. Typically Underscan is used if the image g oe s beyond the display. The mask level can be adjusted from 0 IRE (black) to 100 IRE (white) with a slider bar control.
062210 10 Input and Output HDCP modes Input Colorimetry Menu Timeout Menu Navigation More consistent factory default commands See Updated Serial Automation command docum ent for more details 8. Other Impr ovement s Added 1080p30 pre-defined output format .
062210 11 DVDO iScan Duo Owner’s Manual S upplement Date: 2/ 15 /10 Firmware Version: 2.00 Build 051 This document provides additional information for the DVDO iScan Duo co nfigured with the latest firmware. It is a supplement to the iScan Duo user manual.
062210 12 Note: This control is currently not updating the c hromaticity values in our input EDID Output Chromaticity Similarly, there are the Output Chromaticity controls which are required for accurate calibration.
062210 13 Using iScan Duo’s Test Pattern Generator 1. Enable test pat tern generator by pressing the ‘Test Pattern O n/Off’ button on the Duo’s remote or using the on -screen menu Output Setup > Test Patter ns > On. 2. Adjust primaries and white point using the on-screen menu.
062210 14 There are 2 ways to use this control. a) Using the iScan Duo’s test pattern generator as a reference so urce b) Using an external video source to generate the re ference test patterns Using iScan Duo’s Test Pattern Gener ator 1.
062210 15 2. Support for Audio only optical and coax sources This feature is for users who have digital audio only (coax and optical) source (i.e. no video source) and want to use it with Duo. Previously this feature is not available because the Duo goes into standby mode when there is no video i nput (auto standby - on).
デバイスDVDO DVD VCR Comboの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
DVDO DVD VCR Comboをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDVDO DVD VCR Comboの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。DVDO DVD VCR Comboの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。DVDO DVD VCR Comboで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
DVDO DVD VCR Comboを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDVDO DVD VCR Comboの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、DVDO DVD VCR Comboに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDVDO DVD VCR Comboデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。