DXG TechnologyメーカーDXG-599Vの使用説明書/サービス説明書
ページ先へ移動 of 34
DXG-599V TWIST HD User’s Manual DXG USA.
i Preface Congratulatio ns on your p urchase of t his advance d camcorder. Make sure that you read th is manual carefully and keep it in a safe place for future reference. About this manual Every effort has been made to ensure that the contents of this manual are correct and up t o date.
ii Precautions General precautions • Do not use or st ore the product in dusty, d irty, or sandy areas , as its componen ts may be da maged. • Do not stor e the product i n a hot e nvironment. H igh temperatures can shorten the life of electronic devices, damage battery and warp or melt certain plas tics.
ii i Notes on the LCD Screen Caution must be observed when dealing with the fluid contained in the LCD. Ensure that fluid does not leak if the screen becomes cracked or damaged. If this occurs, follow these s teps: • If the fluid makes contact with skin, wipe it with a clean cloth then rinse with a large amount of water.
iv • Remove the battery if the camera is not going to be used for a long time. I f the ba ttery is lef t unused for more than 3 mo nths, you need to charge the b attery bef ore use.
1 1 Introduction Read this se ction to lea rn about the features a nd functions of the camcorder. This chapter also cove rs syste m requirements, package contents, and descr iptions of the har dware components.
2 1.3 Unpacking the camcorder The following items should be presen t in the package. If any item is missing or appea rs damaged , contact yo ur dealer imme diately.
3 1.4 About the camcorder Refer to the following illustrations to familiarize yourself with the buttons a nd controls o f this camc order..
4 SEE BELOW FOR A DESCRIPTION OF EACH B UTTON: DEL Button Press DEL button to delete files when you’re in Camcorder or Camera mode . Lock Button In Camera o r Camcorder mode, pr e ss Lock button to “l ock” mode. Left/Right Navigation Buttons When in Camcorder or Cam era Mode : Press LEFT/RIG HT buttons to zoo m.
5 Up/Down Navigation B uttons In Camcorder Mode: Press UP or DOWN buttons to change video resolution. On the upper-left corner of LC D, you will see either 1080p HD, 720p60 Sports Mode, HD720p , WVGA, QVGA as you press up or down In Camera Mode: Press UP/DOWN buttons to change resolution.
6 PLAYBACK Button In Video and Camera modes , press to enter t he playback mode. REC/OK or MIDDLE Navigationa l Button When in Camcorder Mode: Press to start or stop video recording. When in Camera Mode: Press to take a picture. In Settings Mode: Press to Confirm selection.
7 2 Getting started Read this section to learn how to start using the camcorder. This section covers basic f unctions such a s switching on, i nserting the battery and memory card, and configuring preliminary settings.
8 2.2 Inserting the battery This camcorder is designed to use a rechargeable Li-ion battery. Only use the battery supplied or similar battery recommended by the manufacturer or your dealer. z Note : Install the battery exactly as described here. Installing the battery incorrectly could cause damage to the camcorder and possibl y start a fire.
9 2.3 Charging the battery You can charge the battery with the charging unit provided. Follow the steps below to charge your battery. 1. Insert the Li-ion b attery into the charging bay. 2. Connect one end of the power cord to the charging unit and then plug the other end to the wall outlet.
10 2.4 Turning on/off the camcorder Rotate the LCD display CLOCK WISE to turn the camcorder ON. Rotate to ori ginal positi on the LC D to turn off the camcor der. Note: Do not ro tate LCD counterclockwise from original position as th is may damage the LCD.
11 2.6 Connecting to PC us ing a USB/AV cable Connect the camcorder to a computer using the supplied USB/AV cable as shown in the illustration. 2.7 Connecting to TV using an HDMI cable You can also connect the camcorder to a TV using the HDMI cable.
12 2.8 Before you start Before you star t using the ca mcorder, some b asic settings such as date and time and beep function need to be configured. 2.8.1 Setting the date an d time To adjust the date and time, do the following: 1. Turn on the camcorder, and press MODE button to SET .
13 2.8.2 Setting the beep To adjust the beep, do the following: 1. Turn on the camcorder, and move the mode dial to SET . 2. Use UP/Down Navigational button to Select VOLUME.
14 3 Using the camcorder 3.1 Recording videos To record a video, do the following: 1. Turn on the camcorder and press MODE button to CAMCORDER mo de. 2. Press UP/DOWN navigational butto n to change video resolution: 1080p, 720p60, HD720p, WVGA, QVGA 3.
15 The Video Recording Screen Icon Description Indicates the camcorder is currently in Video mode. Indicates the video resolu tion. When red Key icon is on, this indicates that it is locked in Camcorder mode. Zoom (Only for 720p, WVGA) Indicates the amount of battery power left.
1 6 3.2 Playing videos To play back videos, do the following: 1. While in CAMCORDER MODE, press the PLAY button to enter the playback mode. 2. Use the left/right Navigational B utton to browse the recorded videos. z Press Down Navigatio nal Button to enter thumbnail mode.
1 7 The Video Playback Screen Icon Description Indicates the camcorder is currently in Video Playback mo de. 1/6 Indicates the number of recorded files.
18 3.2.1 Deletin g One Video File The Delete One selection allows you to delete an individual file from your camco rder. To delete a file, do the following: 1. When in Camcorder Mode, press the PLAY button to e nter the playback mode. 2. Use the left/right Navigation Butt on to select video file.
19 3.2.2 Del ete All Video Files The Delete all selection allows you to delete all files from your camcorder. To delete all files, do the following: 1.
20 3.3 Shooting photos To shoot a photo, do the following: 1. Turn on the camcorder by tw isting the LCD clockwise. 2. Press the MODE button to Camer a mode. z You can opt to change the resol ution befor e taking a picture by pressing the Up/Down navigational Button i.
21 The Photo Shooting Screen Icon Description Indicates the camcorder is currently in Camera mode. 5M/16M Indicates the image size. Select 5M or 16M. Indicates the amount of battery power left. SD Indicates that files are saved to SD card Indicates the number of shots left.
22 3.4 Viewing photos To view photos, do the following: 1. While in CAMERA MODE, press the Play Button to ente r the Photo Playback . 2. Use the left/right Navigation Butt on to browse photos. • Press DOWN Na vigational Butto n to enter the thu mbnail mode.
23 3.4.1 Delete One Photo File The Delete One selection allows you to delete an individual file from your camco rder. To delete a photo file, do the following: 1. When in Camera Mode, press the PLAY button to enter the playback mode. 2. Use the left/right Navigation Butt on to select photo file.
24 3.4.2 Delete All Photo Files The Delete all selection allows you to delete all files from your camcorder. To delete all files, do the following: 6. When in Camcorder Mode, press the PLAY button to e nter the playback mode.
25 3.5 Settings To access the System menu, do the following: 1. Press MODE button until to l to SET . 2. Use the Down Navigational Bu tton to select the desired option. a. VOLUME/BEEP : Press Left or Right navigational button to turn off/ on BEEP b. TV STANDARD : Press Left or Right navigational button to select PAL or NTSC.
2 6 Appendix Specifications General Imaging sensor 1/3.2” CMOS 5.0Megapixel Sensor Active pixels 5.0 Megapixel Storage medi a Internal: Built-in 128MB Flash Memory SD Card (Up to SDH C 32GB Cla ss6) Available memory storage is 78MB. Lens F2.8, f=4.76mm Fixed Lens Focus range 5feet-infinity Still image Format: JPEG (EXIF 2.
2 7 General TFT monitor 3.5” TFT (960 x 240 pixels) (16 :9) White balance Auto PC interface USB 2.0 (High Speed) TV out format NTSC / PAL via HDMI or AV cable Shutter speed Video: 1/30 ~ 1 /2000 sec. Still: 2 ~ 1/4000 sec. Power supply Li-ion Battery NP-40 SDHC Logo is a trademark of SD-3C, LL C.
To transfer files to your PC: 1) Turn the cam era on. 2) Connect the USB cable. (The LCD will go blank this is normal). 3) A window pops-up giving options for viewing and copying files.
29 We b s i t e : Please visit our website at w ww .dxgusa.com for any product updates or special announcements. Y ou can also check out our online support desk where you can register your product, send emails to our technical support, and find a list of frequently asked questions (F AQs).
デバイスDXG Technology DXG-599Vの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
DXG Technology DXG-599Vをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはDXG Technology DXG-599Vの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。DXG Technology DXG-599Vの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。DXG Technology DXG-599Vで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
DXG Technology DXG-599Vを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はDXG Technology DXG-599Vの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、DXG Technology DXG-599Vに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちDXG Technology DXG-599Vデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
