AKAIメーカーACAD100Nの使用説明書/サービス説明書
ページ先へ移動 of 38
.
2 T able of contents 1. Disposal of used electrical and electronic equipment ................................................. 4 1.1 Disposing of the battery / batteries .................................................................................
3 ACAD100N 1 1. Anti-theft system ........................................................................................................... 29 1 1.1 Remove the panel ....................... ...........................................................
4 Disposal of used electrical and electr onic 1. equipment Z The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste.
5 ACAD100N Please familiarize yourself with the different functions of your device before you begin driving. Excessively high volumes can pose a risk for you and other people in traffic. Therefore always select the volume at such a level that environmental sounds (horns, sirens, etc.
6 Before the final installation of the device into a DIN insertion compartment in the dashboard, connect the cables and test the connections. Only use the accessories included in the delivery . Usage of unauthorized components can cause damages.
7 ACAD100N Installa tion 3. Unpacking and checking the contents 3.1 Please check if the following items and accessories are included in the received package:.
8 1x Car Radio/Navigation Bluetooth 1x Protective carrying case for detachable front panel 1x Mounting bracket 1x Assemble bar 1x Screw B15x16 4x Bolt M5 4x Nut M5 1x Flat washer 1x Spring washer 2x U.
9 ACAD100N Detachable control panel 3.3 Detaching the control panel 1 2 3 4 4 5 6 Switch the power off. Press the OPEN button to release the panel. Pull the panel out. Attaching the control panel Insert the left side of the control panel into the main unit.
10 Electrical connection 3.5 1 10 9 4 7 8 B A 5 6 2 3 1 Audio Video Input 2 Audio Video Output 3 Subwoofer Output (Blue) 4 ISO Cable Connection 5 Driver Safety wire (Brown) W ARNING The Driver Safety .
1 1 ACAD100N ISO A CONNECTOR NOTE Depending on the manufacturer , the contacts on your vehicle connection may be assigned differently . This is not a defect of the device but caused by a deviating connector pin assignment by the manufacturer of your vehicle.
12 1 EJECT button: Press to flip the front panel down and eject the disc. If the disc is not removed for about 10 seconds afte eject, the disc is reinserted automatically . When disc in/ out, put front panel at 0 degree to avoid distortion of disc. 2 OK button: Press it in the menu to confirm settings.
13 ACAD100N - [5-6]: Fast-forward/reverse buttons: use these buttons for fast forward (FF) or fast reverse (REW) search in a track. 15 AMS button: In Radio mode: Short press to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds.
14 7 Next/previous track buttons: In RADIO mode, press to search a previous or next station automatically , press and hold for two seconds to start search a station manually , then press them to tune each frequency step upward or downward.
15 ACAD100N Main menu 5. The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another . Read this chapter for a guided tour . Unit starts by displaying the Main menu. This is the root of the screen hierarchy , and you can simply access all features by tapping on the touch screen buttons.
16 mode Color Setting Read/Play files in USB memory Play files from Disc Read/Play files in main SD card** Quit DVD Player Exit this onscreen menu Press Previous track button to restart a track, press it twice to skip to the previous track. Press Next track button to skip to the next track.
17 ACAD100N Drive W arning 5.6 DVD Player will not display a DVD screen while vehicle is moving for driver ’s safety . Only when the handbrake is on and the driver safety wire is correctly connected, a DVD screen will be displayed. Enjoy sound only when driving.
18 Radio play er 6. T o start Radio, tap RADIO button on main menu screen. Button Function Quit Radio Start Navigation V oice guide over radio sound Press to search a previous or next station automatically . Press and hold to search manually , then press them to tune each frequency step upward or downward.
19 ACAD100N A V -IN Mode 7. T o start A V -IN Mode, tap on A V -IN button from main menu screen. Button Function N A V I Start Navigation Navigation V oice guide on Color Setting Exit A V -IN Color setting No Signal W arning NO VIDEO SIGNAL will be displayed when there is no Video source signal detected.
20 Bluetooth mode 8. W ARNING Driving and having a T elephone conversation at the same time is dangerous, please park your car before having a telephone conversation.
21 ACAD100N In Bluetooth main menu, Bluetooth Disconnect Profile screen will show when a profile is linked in Hands free profile or A2DP profile. Auto-connect - Disconnect 8.
22 Speed Dial Mode 8.6 A stored number can be stored as a speed dial (abbreviated number) by pressing a number (any number from 0 to 9) for 3-4 seconds. The device informs with the screen as shown that a dial number has already been stored as speed dial.
23 ACAD100N Utility 8.10 Utility contains various features for user comfort and convenience. T ap on the Utility Control button from main menu screen to enter Utility menu screen. Press BACK button to return to Main Menu Screen. Calculator 8.1 1 Execute calculator Application.
24 Setting contr ol 9. Y our device has default system settings. Y ou can customize the settings to suit your personal needs. Once you change settings, your new settings will remain until you change it again. T o start SETTING, tap on button from main menu screen.
25 ACAD100N Button Function Brightness TFT Panel brightness control A V1 Rear CAM / Other Rear Gear Enable/Disable Rear CAM: set A V1 as rear cam, Other: set A V1 as A V IN.
26 T A 9.5 T A SEEK mode When newly tuned station does not receive TP information for 5 sec, the radio retunes to next station which has not the same station (PI) as the last station, but has the TP information.
27 ACAD100N D VD setup menu 10. Press the SETUP button on the remote control to enter the DVD player setup menu to setup the DVD player operation setting. Press SETUP button to enter into the system settings main menu. Press the left or right arrow buttons to move to the highlighted menu item and select one of the Setup Pages.
28 Audio setup 10.3 Down Mix setup Press the DOWN arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to ‘STEREO’. If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect), select ‘L T/RT’.
29 ACAD100N Anti-theft system 11. Remove the panel 1 1.1 Press the POWER button to switch the power off. Press OPEN button to detach the panel. Pull the panel out. Place the panel into the case and take it with you when you leave the car .
30 Handling discs 12. Dirty , scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. T o keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity , high temperature or dust.
31 ACAD100N Cleaning 13. Cleaning the cabinet 13.1 Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth with a weak solution of soapy water , and then wipe clean. Cleaning discs 13.2 Fingerprints should be carefully wiped from the surface of disc with a soft cloth.
32 T r oubleshooting 14. Symptom Cause Solution No power . The car ignition is not on. If the power supply is properly connected to the car accessory , switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Disc cannot be loaded. Presence of disc inside the player .
33 ACAD100N Ser vice and war r anty 15. In case of technical problems with your product, contact the sales outlet where you have purchased this product AKAI Benelux grants you a 1-year warranty from the invoice date. In case of defects, the buyer only has a right to subsequent performance.
34 T ec hnical da ta 16. General Parameter V alue Operation V oltage Range 1 1-16.0 V DC Maximum Operation Current 10 A Grounding System Car Battery , Negative Pole Installation Dimension (W/H/D) 178 .
35 ACAD100N GPS system 17. W arnings and safety information 17.1 AKAI NA VI PLUS is a navigation system that helps you find your way to your selected destination.
36 GPS antenna installation 17.3 The unit determines its position by communicating with the Global Positioning Satellites through its GPS antenna. The waterproof antenna may be mounted inside or outside of the vehicle. If you opt for interior mounting, keep in mind that the GPS antenna can normally not “see” through metal.
37 ACAD100N Notes 18..
Heeft u na het lezen van deze handleiding nog vragen? Neemt u dan contact op met AKAI Benelux via: 0900-3555333 Avez-vous des questions après avoir lu ce manual? Contactez AKAI Benelux par téléphone au : 070-355505 www .
デバイスAKAI ACAD100Nの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AKAI ACAD100Nをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAKAI ACAD100Nの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AKAI ACAD100Nの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AKAI ACAD100Nで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AKAI ACAD100Nを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAKAI ACAD100Nの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AKAI ACAD100Nに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAKAI ACAD100Nデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
