AKAIメーカーAHC1200の使用説明書/サービス説明書
ページ先へ移動 of 24
.
- 2 - SAFETY INSTR UCTIONS * SEE REAR OF UNIT FOR GRAPHIC SYMBOLS * The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that ma y be of suffi cient magnitude to cause an electric shock.
- 3 - IMPORTANT SAFETY INSTRUCTIONS SAFE USE OF Y OUR EQ UIPMENT Here are a fe w tips to help y ou do this: READ this instruction manual before y ou attempt to use the equipment. NEVER fi t make shift stands or legs with w oodscrews . Use only appro v ed supports and fasteners specially designed for the equipment.
- 4 - T ABLE OF CONTENTS Safety Instructions .................................. 2 Important Safety Instructions................. 3 T able of Contents .................................... 4 Disc Formats ............................................ 5 Accessories .
- 5 - DISC FORMA TS The unit can playbac k discs bearing any of the f ollowing marks: Region Management Information Region Management Information: This unit is designed and man uf actured to respond to the Region Management Information that is encoded on D VDs .
- 6 - A CCESSORIES Remote control (with batteries) ........................................................................................ x 1 A udio/Video cable ........................................................................................
- 7 - CONTR OL REFERENCE GUIDE Remote Control 1) OPEN/CLOSE button Use to open or close the disc tra y . 2) I / ST ANDBY/ON button T urn the unit on and puts it in standby mode. 3) DISPLA Y button Change disc status information displa yed on the TV screen.
- 8 - CONTR OL REFERENCE GUIDE Front and T op P anel Rear P anel Note: Screen sav er - If no button is pressed within 3 min utes, the function will activ ate. If y ou w ant to return the normal screen, press any button. 1) Disc T r ay Opens or closes the disc tra y b y pushing the OPEN/ CLOSE button.
- 9 - A. Connecting y our TV The unit can be connected to your TV in se v eral diff erent w ays , depending on the design of your TV . Notes: • Connect the unit directly to your TV . If y ou connect the unit through a VCR, the pla ybac k picture will be distorted because D V D discs are copy protected.
- 10 - Some TVs or monitors are equipped with component video inputs. Progressive output (D VD) Some TVs or monitors are equipped with Component Video inputs that are capab le of reproducing a progressiv ely scanned video signal. Attention: Make sure y our TV supports progressive scan component video signal.
- 11 - CONNECTIONS B. Connecting a VCR W atching a videotape 1. T u rn on the unit. Use the FUNCTION button on the remote control or the front panel to select "A V IN". 2. T urn on your TV and f ollow the instructions included with it to select the VIDEO function which corresponds to the VIDEO IN jac k that is connected to the main unit.
- 12 - CONNECTIONS D . P ositioning the Speaker s and Subw oofer E. Connecting the Speakers and Subw oofer 6 speaker wires supplied. Both ends of each spek er wire are colour mark ed.
- 13 - CONNECTIONS Plugging in the Unit • Ensure all the components and speakers are connected correctly . • Be sure the AC pow er cord is disconnected and all functions are off before making connections . • When you are not going to use the unit for a long period of time, disconnect the po wer cord.
- 14 - This owner’ s man ual explains the basic instructions f or operating this unit. Some D VDs are pr oduced in a manner that allows specifi c or limited operation during playbac k. Therefore, this unit may not respond to all operating commands.
- 15 - Slow-motion pla y (D VD) 1. Press the SLO W b utton on the remote in pla y mode. • Four speeds are a v ailable . Each time the SLO W b utton is pressed, the speed of slo w-motion pla yback changes in the follo wing sequence: 2. Press the PLA Y b utton to return to nor mal pla yback speed.
- 16 - SPECIAL FUNCTION DISPLA Y function Using the DISPLA Y button, you can chec k the current settings of the f ollowing items: Time, Title/Chapter , A udio , Subtitle and Angle.
- 17 - Y ou can pla y a specifi c title or chapter repeatedly . (Title repeat, chapter repeat, A-B repeat) (D VD) Repeating a Chapter Y ou can pla y the same chapter repeatedly . 1. While the disc is pla ying, press the REPEA T DISC b utton until the “ ” indicator displays on the screen.
- 18 - D VD PR OGRAMMABLE MEMOR Y D VD Pr ogrammable Pla yback Y ou can combine y our f av orite titles/chapters and play them in the order y ou determine. 1. Press the MEMOR Y b utton on the remote control. 2. Use the or button to select the title you w ant, then press the OK button on the remote control to confi rm.
- 19 - When playing CD/JPEG discs , you can modify the Pla y Modes through the T oolkit which appears on the right side of the window . Press the or button on the remote control to navigate between the left/right windows and the or button on the remote control to select fi les/trac ks or play mode items .
- 20 - CUST OMIZING THE FUNCTION SETTINGS A udio 1. Press the SETUP button. 2. Press the or to select Audio . 3. Press the button, then press the or button to select desired option (Subwoof er , T est tones , Digital Output or Channels). 4. Press the button, then press the or button to be adjusted, press the OK button.
- 21 - RADIO OPERA TION 1. Press the FUNCTION button to select RADIO . 2. Press the ST OP button on the front panel or the B AND b utton on the remote control to select FM or MW . 3. Press the TUNING buttons on the remote to tune in to a desired station.
- 22 - Cleaning the Disc A defectiv e or soiled disc inserted into the unit can cause sound to drop out dur ing pla ybac k. Handle the disc by holding its inner and outer edges . • Do NO T touch the surf ace of the unlabeled side of the disc. • Do NO T stick paper or tape on the surf ace .
- 23 - Specifications and external appearance are subject to change without notice. TR OUBLESHOO TING GUIDE SYMPT OM CA USE (AND REMED Y) • Chec k that the A C power cord is connected. • The region number of the disc doesn't match the region number of this Unit.
For more information and warranty conditions, please visit : www .akai.eu Disposal of Used Electrical & Electronic Equipment The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste.
デバイスAKAI AHC1200の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
AKAI AHC1200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAKAI AHC1200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AKAI AHC1200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AKAI AHC1200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AKAI AHC1200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAKAI AHC1200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AKAI AHC1200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAKAI AHC1200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。