Elation ProfessionalメーカーDMX Programmerの使用説明書/サービス説明書
ページ先へ移動 of 16
FLOW CHART ................................................................................................1 CONTROLS & FUNCTIONS.......................................................................2 REAR CONTROLS ...............................
Elation Professional® www .elationlighting.com - DMX Programmer Page 1 1 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 • Reversible DMX Polarity Output • 64 DMX Channels • 8 Scanners buttons (u.
1. FIXTURE BUTTONS - Used to Select any or all of 8 fixtures. 2. SPEED/F ADE TIME F ADER- Used to adjust the F ADE TIME. Fade Time is the amount of time it takes the DMX Programmer to completely change from one scene to another . Used also to adjust the rate of the program speed in Auto Mode.
Notice: Be sure to follow figures two and thr ee when making your own cables. Do not use the ground lug on the XLR connector . Do not connect the cable’ s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’ s outer casing.
Conductor 5-Pin XLR Male (In) 3-Pin XLR Female (Out) Pin 1 Pin 5 - Do Not Use Pin 4 - Do Not Use Pin 3 Pin 2 Pin 1 Pin 3 Pin 2 Not Used Not Used Data T rue (+ signal) Data Compliment (- signal) Ground.
1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate recor d mode. A red LED above the button will be lit and the LCD WINDOW will indicate your in record mode by dis- playing “1: REC”. Press the RECORD BUTTON again, the LCD Display will show “REC.
Elation Professional® www .elationlighting.com - DMX Programmer Page 12 Elation Professional® www .elationlighting.com - DMX Programmer Page 11 SCENE COPY : This function allows you to copy the settings of one scene to another . 1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate recor d mode.
Elation Professional® www .elationlighting.com - DMX Programmer Page 14 Elation Professional® www .elationlighting.com - DMX Programmer Page 13 RECORD A PROGRAM ON THE FL Y : 1. PRESS AND HOLD the RECORD BUTTON for three (3) seconds to activate recor d mode.
Elation Professional® www .elationlighting.com - DMX Programmer Page 16 Elation Professional® www .elationlighting.com - DMX Programmer Page 15 RESET ALL MEMOR Y : This function will erase all scenes and program programs. The unit must be off, to perform this function.
Elation Professional® www .elationlighting.com - DMX Programmer Page 18 Elation Professional® www .elationlighting.com - DMX Programmer Page 17 There are 7 data folders in the CF Card Menu. All “ALL”, Scenes “SCEN, Program 1 “Pro1”, Program 2 “Pro2”, Program 3 “Pro3, Program 4 “Pro4”, and Set “SEt”.
Elation Professional® www .elationlighting.com - DMX Programmer Page 20 Elation Professional® www .elationlighting.com - DMX Programmer Page 19 DOWNLOAD SOFTWARE BY RS-232 T o connect to a PC, you will need a serial lap link cable. NOTE: A stan- dard RS-232 cable will not work.
the RECORD BUTTON, press the UP BUTTON until the LED WINDOW shows “3:d.Pr”. 4. Press the RECORD BUTTON to access data download, the LED WINDOW will now show “ALL”, one of the seven (7) data folders in the DMX Programmer . 5. Select the desired data file you wish to download from your DMX Programmer .
Elation Professional® www .elationlighting.com - DMX Programmer Page 24 Elation Professional® www .elationlighting.com - DMX Programmer Page 23 WHEN ST ARTING ADDRESS IS THE ONE SELECTED 1 2 3 5 4 7.
Elation Professional® www .elationlighting.com - DMX Programmer Page 25 TWO YEAR LIMITED WARRANTY A. Elation ® hereby warrants , to the original pur programr , Elation ® products to be free of manuf actur ing defects in material and wor kmanship for a per iod of 2 Y ears (730 days) from the date of purprogram.
D M X P r og ra mm er ™ N ot es D M X P r og ra mm er ™ N ot es Elation Professional® www .elationlighting.com - DMX Programmer Page 28 Elation Professional® www .
Specifications POWER SUPPL Y : DC 9-15V , 500mA min. DMX CHANNELS: 64 DMX Channels INPUT/OUTPUTS: DMX Out 3-Pin Neutrik Chassis Connector RS-232 Port DB 9 Connector Fog Machine Connector 5-Pin Din Connector USB Connector for DJ W ork Light AUDIO TRIGGER: Built-In Microphone DIMENSIONS: 360mm(L) x 193mm(W) x 74mm(H) 14.
デバイスElation Professional DMX Programmerの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Elation Professional DMX Programmerをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElation Professional DMX Programmerの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elation Professional DMX Programmerの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elation Professional DMX Programmerで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elation Professional DMX Programmerを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElation Professional DMX Programmerの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elation Professional DMX Programmerに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElation Professional DMX Programmerデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。