ElectroluxメーカーU 86000-4の使用説明書/サービス説明書
ページ先へ移動 of 28
SANT O U 86000-4 I Refriger ator Oper ating Instructions PERFEKT IN FORM UND FUNKTION.
2 Dear customer , Before placing your new r efrigerator/fr eezer into operation please r ead these operating instructions car efully . They contain important informa- tion for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e refer ence.
3 Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance P ackaging Information .
4 Important Safety Instructions These warnings ar e provided in the inter ests of your s afety . Ensur e you fully understand them befor e installing or u sing the appliance. Y our safety i s of paramount importance. If you ar e un sure about the meaning of these warnings contact the Cu stomer Care Department for assi stance.
Important Safety Instructions 5 Safety of children • P ackaging (e.g. wraps, polystyr ene) can be dangerous for childr en. There is a risk of suffocation! K eep packaging material away from children! • Please make old appliances unusable prior to disposal.
6 Disposal Appliance P ackaging Information All materials are envir onmentally sound! They can be disposed of or burned at an incinerating plant without danger . About the materials: The plastics can be recycled and ar e identified as follows: >PE< for polyethylene, e.
7 Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperatur e.
Installation 8 Grid pr eparation The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requir es. Warning! When changing the side at which the door opens, r emove plug from the mains.
Installation 9 6 8 7 2 3 10 11 9 12 13 Warning! After completion of the door rever sing opera- tion, check that the door gasket adheres to the cabi- net. If the ambient temper- ature is cold (i.e. in Winter), the gasket may not fit per- fectly to the cabinet.
Installation 10 Installation kit ☞ Building the appliance in under a worktop The dimensions of the recessed installation area must corr espond with those indicated in the figure. ☞ 600 550 min. 600 1 1xA 12 1xB 2xC 2 2 1 1 2 2. To fit these br ackets remove the two scr ews at the top left and right hand front corner s of the cabinet.
4. Push the appliance into place. The plug socket nec- essary for connection of the appliance to the elec- tricity supply should be positioned, so that the plug is not placed in the recess. To adjust the height pr o- ceed as follows: 5. Loosen or tighten the two front feet.
4 11 5 ° 9. To mount the furnitur e door proceed as shown in the fig- ures: Installation 12 6 a b 10 1 2 3 4 C 8. Push the appliance into place and r etain the cab- inet with screws thr ough the securing brackets into the worktop or adjacent woodwork as necessary .
7 8 ab clic clic c C C Installation 13.
Installation 14 Upper part of kitchen furniture panel Lower part of kitchen furniture panel 9/a 275 275 max 100 11 = = 10 9 b a = = 1 2 10 1 2 3 45 °.
10. Refit the covering strip. 13 A Installation 15 12.
Installation 16 Fitting the plinth Important! For the efficient operation of the appliance, it is important that the original ventilation grid is used. • For an opening height dimension A=820 mm and a plinth height dimension a=1 00 mm, the plinth may be fitted without adjustments.
Installation Electrical Connection Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability s hould these safety mea- sures not be observed.
18 Description of the appliance View of the appliance 1 Butter/cheese compartment 2 Sliding shelf 3 Bottle shelf 4 Vegetable dr awers 5 Storage shelves 6 Thermostat Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”).
19 Starting up and temper atur e regulation Important! Only use the appliance when built–in! ☞ 1. Connect the appliance to the mains electricity supply . When the refriger ator compartment door is opened, the internal light- ing is switched on. The temperatur e control knob is located on the right hand side of the refriger ator compartment.
20 Switching off the appliance To switch off the appliance, turn the temper ature r egulator to position "0". If the appliance is not going to be u sed for an extended period: ☞ 1. Remove all refriger ated packages. 2. Switch off the appliance by turning the thermostat knob to position "0".
Interior Accessories V ariable Storage Box Some models are equipped with a variable stor- age box which is fitted under a door shelf com- partment and can be slid sideways. The variable box can be hung from a storage shelf in the r efrigerator com- partment: ☞ 1.
Corr ect stor age For physical reasons, ther e are differ ent temperatur e regions in the fridge. The coldest region is on the lowest storage shelf. Warmer r egions are the top storage shelf, the vegetable drawer and the stor age compartments on the door .
23 Cleaning and Car e For hygienic reasons the appliance interior , including interior acces- sories, should be cleaned regularly . Warning! • The appliance must not be connected to the mains during cleaning.
24 An accumulation of dust will affect the performance of the appliance and cause excessive electricity consump- tion. The structure of the appliance permits you to clean the rear zone close to the wall, using a vacuum cleaner . ☞ 1. Remove the plinth (1), then the venti- lation grid (2); 2.
What to do if ... 25 The compressor does not start immediately after changing the temperatur e setting. This is normal, no error has occurred. Water in the bottom of the cabinet. Water dr ain hole is blocked. See the “Cleaning and Care” section. The compressor starts after a period of time.
26 Regulations , Standar ds, Guidelines This appliance was designed for household use and was manufactured in accordance with the appr opriate standards.
27 the regulations of the German Society of Electrical Engineer s (VDE) were observed in the manufactur e of this appliance. The refriger ant circuit has been checked for leaks. This appliance is in accordance with the following EU guidelines: – 73/23/EWG dated 19 February 1973 - low voltage guidelines.
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Electrolux plc 2004 2222 682-16 -00- 0304 Subject to change without notice.
デバイスElectrolux U 86000-4の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Electrolux U 86000-4をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElectrolux U 86000-4の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Electrolux U 86000-4の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Electrolux U 86000-4で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Electrolux U 86000-4を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElectrolux U 86000-4の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Electrolux U 86000-4に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElectrolux U 86000-4デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。