Elo TouchSystemsメーカーMonitorMouse FOR WINDOWS NT Version 2.0の使用説明書/サービス説明書
ページ先へ移動 of 35
® MonitorMouse FOR WINDOWS NT Version 2.0 Manual Version 2.0.
MonitorMouse ® for W indows NT Version 2.0 User’s Guide Manual Version 2.0 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.com A Raychem Company P/N 008013-A DOC # SW000081.
ii Trademark Acknowledgements IntelliTouch, AccuTouch, and MonitorMouse are registered trademarks, and ELODEV is a trademark of Elo TouchSystems, Inc. All other trademarks are the property of their respective holders. Copyright Copyright © 1997 by Elo TouchSystems, Inc.
iii CONTENTS Chapter 1 - Introduction ............................................................................. 1 About this Manual .................................................................................................. 1 About MonitorMouse for Windows NT .
iv Appendix B - Programming Options ....................................................... 27 Z-Axis Capabilities ............................................................................................... 27 Launching the Touchscreen Control Panel .
1 Introduction • About this Manual 1 • About MonitorMouse for Windows NT 2 • Product Registration 3 • Contacting Elo 3 A BOUT THIS M ANUAL This manual provides all of the information you need to install and use MonitorMouse for Windows NT, Elo TouchSystems’ touchscreen driver designed for Windows NT.
2 Chapter 1 - Introduction See the README.TXT file on the accompanying disk. It contains any additions or changes made after this manual was printed. For details on available product configurations, touchscreen theory of operation, and general troubleshooting, see the IntelliTouch Ultra Product Manual or the AccuTouch Product Manual as appropriate.
Product Registration 3 MonitorMouse for Windows NT also works with most DOS applications run in a window on the Windows NT desktop. Video Compatibility The video function of the display and the Elo touchscreen installed on the display are entirely separate systems.
4 Chapter 1 - Introduction Product announcements, press releases, application notes, software drivers and utilities are available on the web site, CompuServe and the Elo BBS. Your comments and suggestions are welcome. Web: www.elotouch.com BBS: (423) 482-9840 (Downloads only, up to 14.
5 Installing MonitorMouse for Windows NT • Before You Begin 5 • Configuring the Controller 6 • Installing the Software 6 • MonitorMouse for Windows NT Files 9 • Modifications to Windows NT Configuration 11 B EFORE Y OU B EGIN First, be sure Windows NT is installed and operating properly with your mouse.
6 Chapter 2 - Installing MonitorMouse for Windows NT C ONFIGURING THE C ONTROLLER Elo typically ships touchscreen controllers preconfigured for use with Elo software, including MonitorMouse for Windows NT. Install the Elo touchscreen hardware as described in the AccuTouch Product Manual or IntelliTouch Ultra Product Manual .
Installing the Software 7 5. Follow the directions on the screen. 6. MonitorMouse for Windows NT provides two Installation options. Most users should select Typical (the default) and click Next to continue. Custom allows you to install the sample touchscreen programming files.
8 Chapter 2 - Installing MonitorMouse for Windows NT 10. Click the Start button, then click Settings, then click Control Panel. 11. Double-click Elo Touchscreen to run the Touchscreen Control Panel.
MonitorMouse for Windows NT Files 9 12. Click the Calibrate button and touch each of the three targets as they appear on the screen. Touch Yes when the cursor lines up correctly with your finger.
10 Chapter 2 - Installing MonitorMouse for Windows NT The following files are installed by the MonitorMouse for Windows NT Setup program when using the Typical installation option: README.TXT Copied to ELO directory. MONMOUSE.SYS Touchscreen driver designed for Windows NT.
Modifications to Windows NT Configuration 11 M ODIFICA TIONS T O W INDOWS NT C ONFIGURA TION The MonitorMouse for Windows NT Setup program makes the following modifications to Windows NT: 1. Copies driver files to your hard disk and updates previous installations of Elo driver software.
12 Chapter 2 - Installing MonitorMouse for Windows NT.
13 Using MonitorMouse for Windows NT • Touchscreen Control Panel 13 • Tips on Using the Touchscreen in Windows NT 17 • Running DOS Programs from NT 19 • Tips on Using the Touchscreen in Wi.
14 Chapter 3 - Using MonitorMouse for Windows NT Running the Touchscreen Control Panel 1. Touch the Start button, then touch Settings, then touch Control Panel. 2. Double-touch Elo Touchscreen to run the Touchscreen Control Panel. Calibration Select Calibrate to initiate the calibration sequence.
Touchscreen Control Panel 15 Once calibrated, MonitorMouse for Windows NT will be ready to run automatically each time the system is restarted. Recalibration should only be necessary after moving or resizing the video image, or after changing either the touchscreen, controller, or monitor.
16 Chapter 3 - Using MonitorMouse for Windows NT application that does not use double-clicking, you may use one of the other modes. The double-click speed for the mouse and touchscreen can be adjusted with the mouse Control Panel. It may be helpful to adjust this threshold toward the slower end of the scale.
Tips on Using the Touchscreen in Windows NT 17 T IPS ON U SING THE T OUCHSCREEN IN W INDOWS NT The following are suggestions for using the touchscreen with Windows NT.
18 Chapter 3 - Using MonitorMouse for Windows NT Scrolling Scrolling lists can be performed by touching the scroll bars, as you would with the mouse. Some lists can be scrolled more easily by touching the data area, sliding your finger to an edge, then continuing to slide outside the area.
Running DOS Programs from NT 19 R UNNING DOS P ROGRAMS FROM NT DOS mouse-driven programs run from Windows NT may also use the touchscreen when run in a window.
20 Chapter 3 - Using MonitorMouse for Windows NT 7. The application must be intuitive. Guide the user. Limit choices. Test the application on focus groups. If anyone pauses for even a moment, think how to improve the application so it is totally obvious.
21 $SSHQGL[$ Troubleshooting • General Information 21 • Diagnostic Utilities 23 G ENERAL I NFORMA TION Should you experience operational difficulties with the touchscreen system either during or after installation, this appendix should help you determine the source of the problem.
22 Appendix A - Troubleshooting Display Problems If you are experiencing a display problem (such as no video, horizontal and vertical synchronization, raster non-linearities, etc.), realize that the video function of the display and the Elo touchscreen installed on the display are entirely separate systems.
Diagnostic Utilities 23 directory by the Setup program. See COMDUMP and BUSSTAT later in this appendix. The cursor moves but does not line up with my finger. You need to run the calibration routine in the Control Panel. • Open the Elo Touchscreen Control Panel and select the Calibrate button.
24 Appendix A - Troubleshooting It is possible that non-linearity or other problems may exist even if data is being reported to the computer. From the coordinate display, you can determine which corner is the origin and watch both X and Y increase steadily as you slide your finger to the diagonally opposite corner.
Diagnostic Utilities 25 For instructions on how to format the command line and display the version number of COMDUMP, just type: COMDUMP [Enter] Once in COMDUMP, the raw (untranslated) data received from the controller is displayed. Normally, data is displayed at a constant rate only when the touchscreen is touched.
26 Appendix A - Troubleshooting.
27 $SSHQGL[% Programming Options • Z-Axis Capabilities 27 • Launching the Touchscreen Control Panel 29 • Calibrating from Within Your Program 29 Z-A XIS C AP ABILITIES Windows NT programmers can take advantage of IntelliTouch Z-axis capabilities.
28 Appendix B - Programming Options The following example code demonstrates how to obtain Z data. For a complete example, see the included source code for ZAXIS.
Launching the Touchscreen Control Panel 29 IoctlResult = DeviceIoControl( hndFile, // Handle to device IoctlCode, // IO Control code NULL, // We don't need input data 0, // No input buffer required, 0 bytes &IOBuffer, // Buffer from driver. // This buffer will contain Z data DataLength, // Length of buffer in bytes.
30 Appendix B - Programming Options.
デバイスElo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElo TouchSystems MonitorMouse FOR WINDOWS NT Version 2.0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
