Eltaxメーカー5.0の使用説明書/サービス説明書
ページ先へ移動 of 20
O p e r a t i o n M a n u a l D AB-50 DAB/FM T uner.
01 ACCESSORIES Accessories 1 x DAB-50 1 x Remote control 2 x Batteries (Optional) 1 x DAB/FM Antenna (Optional) 1 x Operation Manual This operation manual supplies all the information that you need to have about your T angent DAB-50.
02 CONTENTS ACCESSORIES Accessories 01 CONTENTS Contents 02 SAFETY PRECAUTIONS Safety precautions 03 IMPORT ANT SAFETY INSTRUCTIONS Important safety instructions 04 IMPORT ANT INFORMA TION Important i.
TO MINIMISE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET AS IT CONT AINS DANGEROUS VOL T AGE.
W ARNING: IT IS IMPORT ANT THA T YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE UNIT . KEEP THIS MANUAL FOR FUTURE REFERENCE. This unit was designed and manufactured with a view to providing maximum safety for the user .
Service Do not attempt to carry out any service work yourself. By opening or removing the cabinet, you will be exposed to dangerous voltage or other hazards.
IMPOR T ANT INFORMA TION Handling instructions The top and back panel of the unit may become warm after prolonged use. This is not due to a defect. T urn off the power when the unit is not used.
07 CONNECTION Connection to the mains Do not turn on the power before all connections have been made correctly . Check that all connections have been made correctly before turning on the power . Check that the mains voltage is 230-240V AC50Hz before turning on the power.
08 REMOTE CONTROL Installation of batteries Remove the cover as illustrated. Position two batteries of the type AAA/R03/UM4 in the battery compartment. Make sure that the orientation of the batteries is correct (see drawing at bottom). Replace the cover .
09 Some of the functions of the unit can only be performed by means of the remote control. Some functions are connected with the selected signal input source. Some buttons on the remote control may therefore not be available if the corresponding signal input source has not been selected.
8 9 1 0 1 2 3 4 5 6 7 10 FRONT P ANEL AND CONNECTIONS Front panel Mains switch: Used to interrupt the mains voltage. LED indicator: Lights green when the unit is turned on. Lights red when the unit is in standby mode or in operation. Preset no. 1: Selects the station saved under no.
1 1 FRONT P ANEL AND CONNECTIONS Connections 1 2 3 4 5 Stereo Output: Analogue stereo output. For connection to stereo amplifier or receiver with analogue input. Optical Output : Optical SPDIF output. For connection to stereo amplifier or receiver with digital input.
12 CONNECTION Audio connection layout Subwoofer (Optional) PHON O TUNER DVD CD AUX 1 AUX 2 FUNC TION VOLU ME POWE R HEAD PHON E AMP- 50 AMPL IFIE R Analog amplifier/receiver PHON O TUNER DVD CD AUX 1 .
13 Op ti c al O ut pu t An te n na C on tr a st Op ti c al O ut pu t An te n na C on tr a st For an optimal result it is recommended to install a DAB antenna on the roof or on the loft. The supplied antenna must be adjusted for the best possible result by means of the signal bar described above.
14 PH ON O PO WE R DA B- 50 D AB /F M TU NE R 1 3 3 T urn on the unit by pressing the mains switch. Press the standby button on the remote control to switch to standby mode. The display will turn of f and all functions will be reduced to a minimum to make sure that the unit uses minimal power .
15 OPERA TION AND FUNCTIONS DAB tuning When the unit is turned on for the first time, all settings will be default settings. The settings can be changed according to your preference. When the unit is turned off the next time, these settings will naturally be saved as the new default settings.
16 OPERA TION AND FUNCTIONS FM tuning The DAB-50 offers both manual and automatic tuning on the FM band. This makes it possible to save just one specific channel.
17 TROUBLESHOOTING T roubleshooting PROBLEM CAUSE/REMEDY No power when the unit is turned on. - Switch on the electric current at the socket. - Check that the plug has been correctly inserted into the socket. - The internal fuse has blown and must be replaced by a qualified service technician.
18 TECHNICAL DA T A T echnical data RF section: T uner bands DAB 174-240MHz (Band III) FM 87.5-108.0MHz Sensitivity -96dBm type Display: 2 lines of 16 characters LED backlight Presets 4 Audio outputs Stereo, 2.
www . .c om tangent - audio.
デバイスEltax 5.0の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Eltax 5.0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEltax 5.0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eltax 5.0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eltax 5.0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eltax 5.0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEltax 5.0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eltax 5.0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEltax 5.0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。