Emersonメーカー00809-0100-4102の使用説明書/サービス説明書
ページ先へ移動 of 154
Reference Manual 00809-0100-4102, Rev AA May 2013 R osemount 2051 Wireless Pre ssure T ransmitters Pressure , Le v el, and Flow Solutions with WirelessHART™ Prot ocol.
.
i Reference Manu al 00809-0100-4102, Rev AA R osemount 2051 Wireless Pressure , Flow , and Lev el Solutions Re ad this manual before working with the prod uc t. For pe rsonal and system sa fety , and for optimum produc t per formance , make sure you thoroughly understand t he conte nts before installing, u sing, or main taining this product.
ii Reference Ma nual 00809-0100-4102, Rev AA Explosions could result in d eath or se rious injur y: Installat ion of this tr ansmitte r in an explosiv e en vironmen t must be in acc ord ance with th e appropriat e local, nation al, and inte rnation al st andards, code s, and prac tices.
iii Reference Manu al 00809-0100-4102, Rev AA Shipping considerations for wire less produc ts (Lithium Batteries : Green Powe r Module, model numbe r 701PGNKF): The unit was shipped t o you without the Po we r Module inst alled. Please re move the Power Module from the unit prio r to shipping.
iv Reference Ma nual 00809-0100-4102, Rev AA.
i Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 Ta b l e o f C o n t e n t s 1 Section 1: Introduction 1.1 Using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 T a ble of Cont ents 2.6.2 Re-Mapping device variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 2.6.3 Set range points . . . . . . . . . . . .
iii Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 Ta b l e o f C o n t e n t s 3.5.1 Rosemount 305 Integral Manifold installati on procedure . . . . . . . . . . . . . 48 3.5.2 Rosemount 306 Integral Manifold installati on procedure .
iv Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 T a ble of Cont ents A Appendix A: Specifications and Reference Data A.1 Per formance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 Ta b l e o f C o n t e n t s C Appendix C: Field Communica tor Menu Trees and Fast Keys C.1 Field Communicator menu trees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
vi Reference Manu al 00809-0100-4102, Rev AA Table of Contents May 2013 T a ble of Cont ents.
1 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduction May 2013 Introduc tion Sec t ion 1 Introduc tion Using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p a g e 1 Models cov ered .
2 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduc tion May 2013 Introduction 1.2.3 R ose moun t 2051L Lev e l T ransmitte r Mea sures lev el and s pecific gravi t y up to 300 psi (20,7 bar) 1.2.4 R ose moun t 2051CF Flowmete r s Mea sures flo w in line si zes fr om 1 / 2 in.
3 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduction May 2013 Introduc tion 1.3 WirelessHART installation flo wchart Figure 1-1. W irelessHART installa tion flowchar t Ye s ST ART HERE .
4 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduc tion May 2013 Introduction 1.4 T ransmitter ov er view The Ro semoun t 2051C Coplanar de sign is offe red for Diffe renti al Pressure (DP), G age Pressure (GP) and Absolute Pressure (A P) measure ments.
5 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduction May 2013 Introduc tion Figure 1-3. Block di agram of operation A. Sensor Module B. Ele ctronics Board C. WirelessHART Signal to Control Sys tem D. Field Communicator 1.5 Considerations bef ore transmitt er installation 1 .
6 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduc tion May 2013 Introduction Network design be st practices When mounting the de vice , recommended practice s should be c onsidered to ac hieve the best wirele ss per forma nce . See Appendix D: Network design best prac tices for m o r e i nfo r m at io n o n recommen ded prac tices.
7 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduction May 2013 Introduc tion 701PGNKF). Each ba ttery contains appro xima tely 5 gr ams of lith ium. Under normal conditions, the batte r y mate rial s are self-c ontained and are no t reactive as long as t he batte r y and the Power Module are maintain ed.
8 Reference Manu al 00809-0100-4102, Rev AA Section 1: Introduc tion May 2013 Introduction The Power Module contains a pr imar y li thium-thionyl ch loride batter y (Green Power Module, model number 701PGNKF). Each P ower Module c ontains approxim ate ly 5 grams of lithium.
Reference Manual 00809-0100-4102, Rev AA Section 2: Configuration May 2013 9 Configu ration Sec tion 2 Con figura tion Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration Wa r n i n g s ( ) 2.3 Required benc h top configur ation Bench top c onfiguration requires a Field Communicator , AMS, or any Wire lessHART Communicator . Connect the Field Communicator le ads to the te rminals l abeled “ COMM” on the Power Modu le.
11 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.3.1 Connection diagrams Bench hook-up Connec t the bench equipment as shown in Figure 2-1 on pa ge 11 , and turn on the F ield Communicator by pres sing the ON/O FF ke y or log into AMS.
12 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.4.2 Join de vice t o net work In order to c ommunicate with the Smar t Wireless Gatewa y , and ultimate ly the H ost Syste m, the transmitter must be configured to c ommunicate over the wireless net work.
13 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.4.4 Set proc ess vari able units The PV Unit c ommand se ts the proc ess vari able un its to a llow yo u to mo nito r your p rocess using the appropriat e units of measure .
14 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration T able 2-1. V ariable Mapping Note The varia ble assigned t o the primary variable drive s the output. This va lue can be selected as Pressure or Scaled V ariable .
15 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.5.3 Set transmitt er pe rce nt o f range (transf er function) The Ro semoun t 2051 Wireles s transmitter h as t wo tr ansfe r functions for pressure applica tions: Linear and Square R oot.
16 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.6 Configure for Le vel and Flo w 2.6.1 Con figuring scaled v ariable The Scaled V ariable configuration allows the use r to create a rel ationship/conve rsio n bet ween the pressure units and u ser-defined/cu stom units.
17 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration a. When con figuring for lev el applications, select Lin ear under Select Scaled data options . b. When con figuring for flow applications, select Square R oot unde r Select Scaled data options .
18 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration recomme nded to use the low flo w cutoff function in order t o hav e a stable output and avoid problems due to process noise at a low flow or no flow condition.
19 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 1. Select Manual Set up and click on the HART tab. 2. Assign Primar y , secondar y , ter tiar y and quat ernary variables under Var i a b l e M a p p i n g .
20 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.7 Re view configuration data The following is a list of fac tor y default con figurations that can be viewed by using the Field Communicator or AMS. Follow the steps belo w to review t he transmit ter c onfiguration inf ormati on.
21 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.7.3 R eview radio in f ormation To v i e w r a d i o i n f o r m a t i o n : 1. F rom the Home screen, selec t 1: Over view . 2. Select 7: Devi ce Informati on .
22 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.8 Configuring the L CD displa y The LCD Displa y configuration command allows cust omization of the LCD to suit application requireme nts. The L CD will altern ate be t ween the selected ite ms.
23 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.9 Detailed transmitter setup 2.9.1 Con figure proces s aler ts Proce ss ale r ts allow the transmitt er to indi cate when the c onfigured data point is exc eeded.
24 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2051 Wirele ss pressure tr ansmitter , damping only take s effect when the devic e is plac ed in high powe r refresh mode and during calibration. In norm al power mode , the eff ec tive da mping is 0.
25 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.10.1 De vice re set The maste r reset f unc tion will reset the devi ce e lectronics. T o perform a devic e reset: Performing master re set us ing a Field Communicator Performing master re set using AMS Devic e Manager 1.
26 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration 2.10.3 Numbe r of a vailable ne ighbor s Viewing number of a vailable ne ighbor s using a Field Communicat.
27 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configuration May 2013 Configu ration 2.11 Adv anced F unc tions for HART Prot ocol 2.11.1 Sa ving, R ecalling, and Cloning Con figuration Da ta.
28 Reference Manu al 00809-0100-4102, Rev AA Section 2: Configu ration May 2013 Configuration When finished, the Fie ld Communicator informs y ou of the statu s.
Reference Manual 00809-0100-4102, Rev AA Section 3: Installation May 2013 29 Installa tion Sec tion 3 Installa tion Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 29 Safety messages .
30 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3.2.1 W ar nings ( ) F ailu re to follow these insta llation guidelines could result in death or serious injur y . Make sure only qualified pe rs onnel pe r form the install ation.
31 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3.3 Considerations 3.3.1 Installation c o nside rations Meas uremen t per formanc e depe nds upon proper installa tion of the transmitt er and impulse piping.
32 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Internal antenna po sition The intern al antenna is designed for multiple mounting orientations. The tran smitter should be mounted acc ording to me asureme nt best practice s for yo ur pressure measure men t application.
33 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-2. Installa tion Flowch ar t 3.3.5 Draf t range conside rations Installation For the R ose mount 2051CD0 dra f t range pressure transmitte r , it is best to mount the transmitte r with the is olat ors parallel to the ground .
34 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Tilting of the transmitte r may cau se a z ero shi f t in the transmitte r output, but can be elimin ated by performing a trim procedure. Figure 3-3. Draft range inst allation example A.
35 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3.4 Installation procedures For dimension al drawing informa tion refe r to Appendix A: Specifications and Ref ere nce Data on page 89 . Process flange orientation Mount the proce ss flanges with suffic ient cle arance f or proces s connections.
36 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Environmental se al for housing Always e nsure a proper se al by installing the e lectronics housing co ve r(s) so that polyme r contact s polymer (i.e. no o-ring visi ble).
37 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-5. Mounting bracket option code B4 A. 5 / 16 x 1 1 / 2 Bolts for Panel Moun ting (Not Supplied) B. 3.4 (85) C. 3 / 8 -16 x 1 1 / 4 Bolts for Mounting to T ransmitter D.
38 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Bolt installation Only use bolts supp lied with the Ro semoun t 2051 or sold by Emerson Proc ess Man ageme nt as spare parts. When installing the transmitte r to one o f the option al mounting bra cke ts, torque the bolts to 125 in-lb .
39 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-7. Mounting bolts and bolt configurations for coplanar flange A. T ransmitter with flange bolts B.T ransmitter w ith flange ada p ters and flange/adapter bolts C.
40 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-9. Panel mounting brack et option codes B2 and B8 Figure 3-10. Flat mounting br acket option codes B3 and BC A. 1.625 (41) B. 2.125 (54) C. 2.81 (71) D.
41 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3.4.2 Impulse pip ing Best practices The piping between the process and the transmitte r must accura tely tr ansfe r the pressure t o obtain accurate measureme nts.
42 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Mounting Require ments Ref er t o Figure 3-11 on page 43 f or examples of the following mounting con figurations: Liquid Flow Measurement Plac e taps to the side o f the line to prev en t sediment de posits on the proces s isolat ors.
43 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-1 1. Installat ion example s A. Drain/ve nt valv es 3.4.3 Proce ss c onnec tions Coplanar or traditio nal process c onnec tion Install and tighten all four fl ange bolts before applying pre ssure to a void leakage .
44 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 1. Re mov e the flange bolts. 2. Leaving the flange in plac e, mov e the adapte rs into position with t he O-ring inst alled. 3. Clamp the adapters and the Coplanar flange to the transmitte r module usin g the longer of the bolts supplied.
45 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-12. Inline gage low side pressure port A. Low side pressure por t (atmospheric reference) a 3.4.5 Po wer Module installation Figure 3-13. P ower Module A.
46 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion T o mak e connections, perform the following proc edure: 1. Re move the hou sing cove r on the Power Module compartment side. The Po wer Module supplies all power to the transmit ter .
47 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-14. Op tional LCD Display 3.5 R osemount 304, 305 and 306 integral manifolds The Ro semo unt 305 Int egral Manif old mounts direct ly to the transmitte r and is avail able in t wo designs: T radit ional and Coplanar .
48 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-15. Integral Manif old Designs A. 2051C and 304 Conv entional B. 2051C and 305 Int egral Coplanar C. 2051C and 305 Integral T raditional D. 2051T a nd 306 In-Line 3.
49 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Figure 3-16. Bolt tight ening pattern 3. If the PTFE sensor module O-rings hav e been repl aced, the fl ange bolts should be re- tig htene d af ter i nst a llatio n to comp ensate for col d f low of the O- ri ngs.
50 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Note If using thread tape , be sure the thread tape does not strip whe n the manifold a sse mbly is star ted. 5. W rench ti ghten m anif old into pro ces s connection.
51 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Drain/ Ve n t Va l v e Drain/ Ve n t Va l v e Equalize (closed) Process Isolat e (open) Isolate (open) H L In normal operation the two block valves between the proces s and instrument por ts will be open and the equalizing valv e will be closed.
52 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion Fi ve- val ve Nat ur al Gas conf igu rat ion s s how n: Note Do not open the low side equalize valve bef ore the h igh side equalize valve . Doing so will ove rpressure the tran smitter .
53 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion 3. Ope n the equali ze v alve on the low pres sure (downstream) side of the transmitter . The manifold is now in the prope r configuration for z eroing the transmitt er .
54 Reference Manu al 00809-0100-4102, Rev AA Section 3: Installation May 2013 Installa tion.
Reference Manual 00809-0100-4102, Rev AA Section 4: Commissioning May 2013 55 Commis sioning Sec tion 4 Commis sioning Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pag e 55 Viewing network status .
56 Reference Ma nual 00809-0100-4102, Rev AA Section 4: Commissionin g May 2013 Commis sioning 4.2.1 W ar nings ( ) F ailu re to follow these insta llation guidelines could result in death or serious injur y . Make sure only qualified pe rs onnel pe r form the install ation.
57 Reference Manu al 00809-0100-4102, Rev AA Section 4: Commissioning May 2013 Commis sioning 4.3 Viewing network status If the R osemoun t 2051 Wirele ss was c onfigured with the Ne t work ID and Join Ke y and sufficien t time f or network polling ha s pa ssed, the tr ansmitter should be c onnec ted to the network.
58 Reference Ma nual 00809-0100-4102, Rev AA Section 4: Commissionin g May 2013 Commis sioning Figure 4-1. Diagnostic Screen S equence Figure 4-2. Net work Join Status Screens Field Communicator For HAR T Wireless transmitter c ommunication, a Ro semoun t 2051 Wireless DD is required.
59 Reference Manu al 00809-0100-4102, Rev AA Section 4: Commissioning May 2013 Commis sioning Figure 4-3. Smart Wireless Gatewa y Explorer page. AMS Suite Wireless Configurator When the device ha s joined the net work, it will appear in the Devic e Manage r as illu strated in Figur e 4-4 .
60 Reference Ma nual 00809-0100-4102, Rev AA Section 4: Commissionin g May 2013 Commis sioning Figure 4-5. Smar t Wireless Gate way Network Settings 4.4.1 Using the Fie ld Communica tor Note In orde r to co mmunicat e with a Fiel d Communica tor , powe r the R ose mount 2051 Wire les s T r ansmitter b y connecting the Power Module .
61 Reference Manu al 00809-0100-4102, Rev AA Section 4: Commissioning May 2013 Commis sioning T able 4-1. Rosemount 2051 Wireless F ast Ke y Sequence Figure 4-6. Field Co mmunicator Connec tions 4.5 Configuring transmitt er securit y There are t wo securit y metho ds with the Rose mount 2051 Wireless transmitter .
62 Reference Ma nual 00809-0100-4102, Rev AA Section 4: Commissionin g May 2013 Commis sioning Configuring HART Lock using Field Communicat or Configuring HART Lock us ing AM S Device Manager 1. Right c lick on the devic e and se lect Configure . 2. Under Manual Setup se lec t the Securit y tab.
63 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Sec tion 5 Ope ration and m aint e n anc e Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
64 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance T able 5-1. Rec ommend ed Calibration T asks Note : For 2051CA , 2051T A range 0 and range 5 devices, an acc urate ab solute pressur e source is required.
65 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e For transmitters that are field installed, the ma nifolds discus sed in “Ros emount 304, 305 and 306 int egral mani folds ” on page 47 allow the diff ere ntial transmitt e r to be z eroed using the ze ro trim function.
66 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance Sample calculation for 2051 (0.04% accuracy & 5-year stability) St ep 1: Dete rmine the per formance required f or your application.
67 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Example A range 4 diff ere ntial pressure HAR T transmitte r (2051CD4...) will be u sed in an applica tion with a static line pre ssure of 1200 psi (83 ba r).
68 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance position. Since this correc tion maintains the slo pe of the characterization cur ve, it should not be used in place o f a sensor trim over the full sensor range .
69 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Note Use a pre ssure input source th at is at le a st four time s more accura te th an the transmitte r , and allow the input pressure to stabiliz e for te n seconds bef ore ent ering any value s.
70 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance 5.4.3 R ecall F ac tor y T r im—Se nsor T rim The Recall F ac tor y T rim —Sensor T rim command allows the restoration of the as-shipped fac tor y sett ings o f the Se nsor T rim.
71 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Zero Eff ec t: ± 0.1% of the upper range limit pe r 1000 psi (69 bar) f or line pressures from 0 t o 2000 psi (0 to 138 bar) For line pre ssures abov e 2000 psi (138 bar), the z ero eff ect error is ± 0.
72 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance T o calculate the low trim (L T) value : T o calculate the high trim (HT) value :.
73 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e 5.5 LCD Screen Messages 5.5.1 S tar tup Screen Seque nce The following screens will dis play when the Pow er Module is first connected to the Ro semount 2051 Wire less.
74 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance SV Scree n - sensor t empe rature value T V Sc re en - dev ice tem per atu re val.
75 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e 5.5.2 Diagnostic Butt on Screen Seque nc e The following five screens will displa y when the device is opera ting properly and the Diagnostic Button has been pressed.
76 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance 5.5.3 Net work Diagno stic S tatus Scree ns These scree ns display the network status of the devic e . Only one will be shown dur ing the star tup sequence or d iagnostic seque nce .
77 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Diagno stic Button Scree n 4.4: the devic e is in a disconnected state and requires a “Force Join ” com ma n d t o jo in t h e n et w or k Diagno stic Button Scree n 4.
78 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance Diagno stic Button Screen 4.9: the devic e ha s joined a network and has bee n fu.
79 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e 5.5.4 Dev ice Di agnostic Screens The following screens will show the device diagnostics depending on the state of the device .
80 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance QV Screen - voltag e reading at the powe r supply terminals Pe rcen t Range Scree.
81 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Opera tion and mai nte nanc e Diagno stic Button Scree n 7.1: the terminal v oltage has dropped below leve l of operating limit. Re place the Po wer Module (Part Number: 701PGNKF) Diagno stic Button Scree n 7.
82 Reference Manu al 00809-0100-4102, Rev AA Section 5: Operation and Mai ntenance May 2013 Operation and mainte nance Note Use the R ose mount Wireless LCD P ar t Number: 00753-9004-0002.
Reference Manual 00809-0100-4102, Rev AA Section 6: Troubleshooting May 2013 83 Tr o u b l e s h o o t i n g Sec tion 6 T roubleshoo ting Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
84 Reference Manu al 00809-0100-4102, Rev AA Section 6: Troubleshooting May 2013 Tr o u b l e s h o o t i n g 6.2.1 W ar nings ( ) T able 6-1. Rosemount 2051 Wireless Devic e Status Information Explos.
85 Reference Manu al 00809-0100-4102, Rev AA Section 5: Troubleshooting May 2013 Tr o u b l e s h o o t i n g Pressure ha s Exc eeded Limits The sens or has ex ceeded the maximum measuremen t rang e. 1. Check process f or possible saturation cond ition 2.
86 Reference Manu al 00809-0100-4102, Rev AA Section 6: Troubleshooting May 2013 Tr o u b l e s h o o t i n g LO A l ar m The p rimar y variable has surpas sed the us er defi ned limit. 1. V erif y that the process variable is within user specified limits 2.
87 Reference Manu al 00809-0100-4102, Rev AA Section 5: Troubleshooting May 2013 Tr o u b l e s h o o t i n g T able 6-2. Rosemount 2051 Wireless T roubleshooting T a ble 6-3.
88 Reference Manu al 00809-0100-4102, Rev AA Section 6: Troubleshooting May 2013 Tr o u b l e s h o o t i n g 6.3 Remo ving from ser v ice Fol l ow t h es e st ep s: 1. Follow all plant safety rules and pro cedures. 2. Isola te and ve nt the proces s from the transm itter be fore re moving the transmitte r from ser vice.
Reference Manual 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 89 Specifications and Ref ere nce Data Appe ndix A S pecifica tions and Refer en ce Da t a Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Refer e nce Acc ura c y (1) T otal P er formance Models (1) (1) T otal performanc.
91 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Long T erm Stabilit y Dynamic Performance Line Pressure Effect per 1000 psi (6,9 MP a) (1) Models Long T erm S tability 2051C Ranges 2-5 ±0.
92 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Ambient T emperature Effect per 50°F (28°C) Mounting Po sition Effects Vibrati on Effect Less th an ±0.1% of URL when tested pe r the requ iremen ts of IE C60770-1 fiel d or pipeline wi th high vibra tion leve l (10-60 Hz 0.
93 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A .2.2 R ange and Sens or Limits Zero and Span Adjustment R equirements Ze ro and sp an values can be se t anywhe re within the ra nge limits stated in Ta b l e A - 1 .
94 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Update rate User se lec table, 1 second to 60 minutes. Wireless sensor module for in-line tr ansmitters The 2051 wirele ss transmitter require s the engineered polyme r housing to be se lec ted.
95 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Ro semount 2051L Limit is flange rating or sensor rating, whichever is lower (see the table below). A .3.2 S t atic pres sure limit R osemount 2051CD Only Opera tes within s pecificat ions bet ween sta tic line pressure s of 0.
96 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Process T emperatur e Limits At atmo spheric pre ssures and abov e. A. 3 . 5 H um i di t y L im i ts 0–100% re lativ e humidity A.
97 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A .4 Ph ysical specifications A .4.1 Electr ical connections HART int erface connections fixed to the Power Module . A .4.2 Proc ess c o nnec tions R osemount 2051C 1 / 4 –18 NPT on 2 1 / 8 -i n.
98 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Process flange s and adapters Plat ed carbon steel SST: CF-8M (Ca st 316 SST) per.
99 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Bolts Plat ed carbon steel per ASTM A449, T y pe 1 Aust enitic 316 SST per ASTM F5 .
100 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data A .4.6 Shipping W eights f or 2051 Wi reles s Pressure T ransmitte r T able A-2. T ransmitter weights without options T able A-3. 2051L weights without opti ons T able A-4.
101 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A .5 Dimensional Drawings Dimensions are in inches (milli meters). Process adapte rs (option D2 ) and Ro semount 305 integral manif olds must be orde red with the transmitter .
102 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data (1) T olerances are 0.040 (1,02), –0 .020 (0,51). T able A-5. 2051L Dimensional Specifications Exc ept whe re indica ted, dimen sions are in inche s (millimet ers).
103 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A .6 Ordering Information T able A-6. 2051C Coplanar Pressure T ransmitte rs O rdering Information ★ The Standard offering represents the most common options.
104 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data O-ring Stan dard St an da rd A Glass-f ille d PT FE ★ B Graphite-filled PTFE .
105 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Seal Ass emblies (9) Stan dard St an da rd S1 (7) Asse mble to one R os emoun t 11.
106 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Calibration Cer tificate Stan dard St an da rd Q4 Calibration Cer tificate ★ Q.
107 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data RC 1 / 4 RC 1 / 2 Process Connection Expanded D9 (14) R C ¼ Flange with R C ½ Fl.
108 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T able A-7. 2051T In-Line Pressure T ransmitter Ordering Information ★ The Standard offering represents the most common options. The starred opti ons ( ★ ) should be selected for best delivery .
109 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Mounting Brack et Stan dard St an da rd B4 Brack et f or 2-in.
110 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Surface Finish Stan dard St an da rd Q16 Sur face finish certification for sanit.
111 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data T able A-8. Ros emount 2051L Liquid Lev el T ransmitter Ordering Information ★ The Standard offering represents the most common options.
112 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data P 2-in. ANSI/ASME B16.5 Class 600 CS ★ E 3-in. ANSI/ASME B16.5 Class 600 CS ★ X (1) 2-in. ANSI/ASME B16.5 Clas s 150 SS T ★ F (1) 3-in.
113 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data O-ring Stan dard St an dar d A Glass-filled PTFE ★ Housing Mat eri al Cond uit E.
114 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T oolkit T ot al System Per formance Reports Stan dard St and ard QZ Re mote Se .
115 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data T able A-9. Rosemount 2051CF A Annubar Flowmeter Ordering Information ★ The Standard offering represents the most common options. The starred opti ons ( ★ ) should be selected for best delivery .
116 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Pipe Material / Mountin g Assemb ly Material Stan dard St a n dar d C Carbon ste.
117 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data R6 600# RTJ Flange R9 (1) 900# RTJ Flange RF (1) 1500# RTJ Flange RT (1) 2500# RTJ.
118 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Opt io ns (Include with selec ted model number) Pressure T esting Expanded P1 (2.
119 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Expanded G1 Needle V alves, Carbon Stee l G3 Needle V alves, All oy C-276 G5 OS&am.
120 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T able A-10. Rosemount 2051CFC Compact Flowmet er Ordering Information ★ The Standard offering represents the most common options.
121 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data T ransmitter Housin g Material Conduit Entr y Siz e Stan dard St a n dar d P Engineered Po lymer N/A ★ Tr a n s m i t t e r P e r f o r m a n c e C l a s s Stan dard St a n dar d 1 Up to ±2.
122 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T ransmitter Calibration Cer tification Stan dard St a n dar d Q4 Calibration Ce.
123 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data T able A-11. Rosemount 2051CFP Integr al Orifice Flowmeter Ordering Information ★ The Standard offering represents the most common options.
124 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data 0250 0.250-in. (6.35 mm) for 1-in. Pipe ★ 0345 0.345-in. (8.76 mm) for 1-in. Pipe ★ 0500 0.500-in. (12 .70 mm) for 1-i n. Pipe ★ 0630 0.
125 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data Stan dard WP5 Inte rnal Antenn a, Compatible with Green Powe r Module (I.
126 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data T ransmitter Calibration Cer tification Stan dard St a n da rd Q4 Calibration Ce.
127 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data A. 7 Op ti on s Standard c onfiguration Unless otherwi se specified, transmitter i.
128 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data Output information Output range points must be the same unit of measure .
129 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Reference Data May 2013 Specifications and Ref ere nce Data R osemount 2051C T raditiona l Flange br acke t options B1 Brack et f or 2-in. Pipe Moun ting For use with t he tradition al flan ge optio n Bracke t for mounting on 2-in.
130 Reference Manu al 00809-0100-4102, Rev AA Appendix A: Re ference Data May 2013 Specifications and R ef erenc e Data A .8 Spare par ts Meter Kit 02051-9020-0001 Mete r Cove r O-ring, Silic one, #2 .
Reference Manual 00809-0100-4102, Rev AA Appendix B: Product Certifications May 2013 131 Produc t Cer tifications Appe ndix B Produc t Ce r t ifications Wireless Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
132 Reference Manu al 00809-0100-4102, Rev AA Appendix B: Product Ce rtifications May 2013 Produc t Cer tifications B.1. 5 Ordinar y locat ion cer tificat ion for FM As st andard , the transmitter h a.
133 Reference Manu al 00809-0100-4102, Rev AA Appendix B: Product Certifications May 2013 Produc t Cer tifications Special Conditions for Safe Use (X) The plastic e nclosure ma y constitute a pote ntial e lec trostatic ignition risk and must not be rubbed or cle aned with a dr y cloth.
134 Reference Manu al 00809-0100-4102, Rev AA Appendix B: Product Ce rtifications May 2013 Produc t Cer tifications.
Reference Manual 00809-0100-4102, Rev AA Appendix C: Field Co mmunicator Menu Trees May 2013 135 Fiel d Communi cator Menu T rees and F ast Ke ys Appe ndix C F ie ld Communica t or Me nu T ree s and F a st K eys Field Communicator menu trees . . . . .
136 Reference Manu al 00809-0100-4102, Rev AA Appendix C: Field Communicator Menu Trees May 2013 Field Communicat or Menu T rees and F ast K eys Figure C-2.
137 Reference Manu al 00809-0100-4102, Rev AA Appendix C: Fiel d Communicator Menu Trees May 2013 Fiel d Communi cator Menu T rees and F ast Ke ys Figure C-3.
138 Reference Manu al 00809-0100-4102, Rev AA Appendix C: Field Communicator Menu Trees May 2013 Field Communicat or Menu T rees and F ast K eys Figure C-4.
Reference Manual 00809-0100-4102, Rev AA Appendix D: Network de sign best practices May 2013 139 Appendix D: Network design best prac tices Appe ndix D Net work design be st prac tice s Effective range . . . . . . . . . . . . . . . . . . . . . . . . .
140 Reference Manu al 00809-0100-4102, Rev AA Appendix D: Network design best practices May 2013 Appendix D: Network design best prac tices For example s and complet e explana tions, ref er to the IEC62591 Wireless HAR T System Engineering Guide : http ://www2.
.
Reference Manual 00809-0100-4102, Rev AA May 2013 St andard T erms and C onditions of Sale can be found at www .rosem ount.com/terms_of_sale The Em erso n lo go is a t rad emar k a nd ser v ice m ar k of Em er son E le c tric Co. Ro semoun t. the Ros emount logo t ype, and S MART F AMIL Y are regis tered tra demarks of R osem ount Inc.
デバイスEmerson 00809-0100-4102の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Emerson 00809-0100-4102をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEmerson 00809-0100-4102の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Emerson 00809-0100-4102の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Emerson 00809-0100-4102で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Emerson 00809-0100-4102を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEmerson 00809-0100-4102の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Emerson 00809-0100-4102に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEmerson 00809-0100-4102デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。