Epsonメーカー600Pの使用説明書/サービス説明書
ページ先へ移動 of 119
EPSON ® PowerLite ® 600p/811p/820p Multimedia Projector User’ s Guide 600-811-820.book Page i Tuesd ay, April 30, 2002 10:17 AM.
ii Important Safety Information WARNING : Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers.
C iii Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Getting the Most from Your Projector . . . . . . . . . . . . . . . . . . 2 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . .
iv Controlling the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Switching Between Picture Sources . . . . . . . . . . . . . . . . 29 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Turning Off the Picture and Sound .
v Customizing Projector Features . . . . . . . . . . . . . . . . . . . . . . 55 Setting Advanced Features . . . . . . . . . . . . . . . . . . . . . . . 57 Viewing Lamp Usage and Other Information . . . . . . . . . . . . 58 Restoring the Default Settings .
vi Connecting to a High-End Workstation . . . . . . . . . . . . . . . 93 Connecting to a DVI Video Source . . . . . . . . . . . . . . . . . . . 93 B Appendix B: Notices . . . . . . . . . . . . . . . . . . . . . . . . . 95 Important Safety Instructions .
W Welcome 1 - Welcome T he EPSON ® PowerLite ® 600p, 811p , and 820p are portable projectors that weigh less than 10 pounds and offer up to 2500 ANSI lumens of brightness. From classrooms to aud itoriums, your full-color presentations and videos will be bright and visible even in ordinary room lighting.
2 Welcome Getting the Most from Your Projector Your EPSON PowerLite projector is a highly versatile p resentation tool. You can connect it to one or two computer sources and up to three video sources and easily switch between them. You can also include sound for up to three of the sources.
Welcome 3 If you ’ re permanently installing the projector, you may wish to connect external speakers or a public address system to the projector ’ s Audio Out port; see page 83.
4 Welcome ■ Owner’s Kit Includes your Quick Setup sheet, warranty brochures, and EPSON PrivateLine ® Support card. Store this User ’ s Guide in the folder and keep the folde r with your projector at all times. ■ Built-in help system Provides assistance for common problems.
Welcome 5 Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you ne ed to send the projector to another location.
6 Welcome Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you need an S-Video cable. (One is usually provided with your video device.) ■ To receive a component video signal from a VCR or other video device, you need a VGA-to-component video cable.
Welcome 7 Optional Accessories To enhance your use of the projector, EP SON provides the following optional accessories. You can purchase these accessories from your dealer, by calling EPSON at (800) 87 3-7766, or by visiting the EPSON Store SM at www.
8 Welcome 600-811-820.book Page 8 Tuesday, April 30, 2002 10:17 AM.
1 Setting Up the Projector 9 1 Setting Up the Projector T his chapter te lls you how to se t up the project or for a laptop computer or video presentation. If you need to set up t he projector for a permanent installation or connect it to a desktop or workstation computer, see Appendix A.
10 Setting Up the Projector Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. ■ Place the projector on a sturdy, level surface, approximately 2.
Setting Up the Projector 11 If you place the projector below the le vel of the screen, you ’ ll have to tilt it up by extending the feet as shown. Tilting the projector upward causes the image to lose its square shape, but you can correct the distortion by pressing the Keystone button as described in the next chapter.
12 Setting Up the Projector Connecting to a Laptop Computer You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including PC notebook and laptop computers, Macintosh PowerBooks and iBooks, and hand-held devices.
Setting Up the Projector 13 Connecting the Cable for Remote Mouse Control Using the remote control as a wireless mouse lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 30 feet away (for details, see page 41).
14 Setting Up the Projector Amplifying Computer Audio Your laptop probably has its own sound system; however, it may not be adequate for your presentation. If you need mor e volume or better sound quality, you can connect a stereo, mini-jack audio cable (not included).
Setting Up the Projector 15 Connecting to Video Sources You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other compatible video source to your projector. The projector supports HDTV, NTSC, PAL, and SECAM, and automatically detects the video format.
16 Setting Up the Projector Connecting the RCA A/V Cable Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow plug on one end of th e A/V cable to the projector ’ s yellow Video jack.
Setting Up the Projector 17 Connecting an S-Video Cable If your video source has an S-Video jack, you can use it to project a higher quality video image. However, you ’ ll need an S-Video cable, which may be included with your video source, or can be purchased separately.
18 Setting Up the Projector Connecting a Component Video Cable If your video source has component (blue, green, and red) connectors, you can use them to project a higher qual ity video image. However, you ’ ll need a VGA-to-component video cable, which is available from EPSON; see page 7.
2 Using the Projector 19 2 Using the Projector O nce you ’ ve connected the projector to your computer or other equipment (as described in Chapter 1 or Appendix A), you ’ re ready to turn on the projector, adjust the image, and give your presentation.
20 Using the Projector Turning On Your Equipment Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1 or Appendix A. Then turn on your projector, as described below, followed by any equipment you ’ ve connected to it.
Using the Projector 21 5. Press the red Power button on top of the projector. The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the No Signal message displayed.
22 Using the Projector What To Do If You See a Blank Screen If you see a blank screen or a blue screen with the No Signal message after turning on your computer or video source, try the following: ■ Make sure the cables are connected correctly, as described on page 12 (for laptops) or in Appendix A (for other systems).
Using the Projector 23 If you ’ re using a PowerBook or iBook with OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, sele ct Control Pa nels , then click Monitors and Sound.
24 Using the Projector If you're using Macintosh OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, sele ct System Preferences , then select Displays .
Using the Projector 25 Focusing and Zooming Your Image Rotate the focus ring to sharpen the image. Rotate the zoom ring to reduce or enlarge the image. If the image still isn ’ t large enough, you may need to move the projector farther away from the sc reen.
26 Using the Projector Adjusting the Height of Your Image If the image is too low, you can raise it by extending the projector ’ s foot. 1. Stand behind the projector. Press the foot release button and lift the front of the projector. This unlocks the foot.
Using the Projector 27 Adjusting the Image Shape If the projected image isn ’ t square or has a “ keystone ” shape, do one or more of the following: ■ If your image looks like or , you ’ ve placed the projector off to one side of the screen, at an angle.
28 Using the Projector Resizing the Image Some computer images need to be resized to display in the projector ’ s native resolution. If only part of your computer image is displayed, you can correct it with the Resize button. ■ Press the Resize button on the projector ’ s control panel (or on the remote control).
Using the Projector 29 Controlling the Projector While giving your presentation, you may want to switch between picture sources, adjust the volume, or temporarily turn off the picture and sound. Follow the instructions below to access theses features from your projector ’ s control panel.
30 Using the Projector Turning Off the Picture and Sound You can use the A/V Mute button on the control panel to darken your screen and turn off the sound. This is useful if you want to temporarily re-direct your audience ’ s attention without the distraction of a bright screen.
Using the Projector 31 3. Press the Power button again. The power light flashes orange for about a minute and a half as the projector cools down. When the projector has cooled, the orange light stays on and the exhaust fan shuts off. If you want to turn the projector on again, wait until the orange light stops flashing.
32 Using the Projector 600-811-820.book Page 3 2 Tuesday, April 30, 2002 10:17 AM.
3 Using the Remote Control 33 3 Using the Remote Control T he remote control lets you access you r projector ’ s features from anywhere in the room — up to 30 feet away. You can use it to tur n the projector on and off, zoom in on a portion of your image, and highlight your presentation.
34 Using the Remote Control Turning On and Using the Remote Control Before using the remote control, you need to install its batteries and turn it on as described below. Installing Batteries Follow these steps to install or replace the batteries: 1. Press the tab to release the battery compartment cover.
Using the Remote Control 35 Using the Remote Control When using the remote control, stand within 30 feet of the projector. Point the remote control either at the front or bac k of the projector or at the screen (the projector ’ s front sensor can detect signals bounced off the screen).
36 Using the Remote Control Adjusting the Volume If you ’ ve connected an audio source to the projector, you can adjust the sound that ’ s output through the projector ’ s speakers. ■ To increase the volume, press on the right side of the Volume button.
Using the Remote Control 37 Zooming Your Image You can zoom in on a portion of the image using the E-Zoom button on the remote control. 1. Press the E-Zoom button. A crosshair indicating the center of the zoom-in area appears on the screen. 2. Use the button to move the crosshair where you want it.
38 Using the Remote Control Displaying Picture-in-Picture Video You can open a small video window on your computer image, and view a video at the same time as your computer presentation. If you ’ re using component video, you can display a second video (from a composite or S-Video source) in the window.
Using the Remote Control 39 Highlighting Your Presentation You can highlight areas on the screen using the numbered buttons on the remote control. You can use these “ special effects ” features to annotate your presentation slides or call attention to your most important points.
40 Using the Remote Control Spotlighting Your Image With the Spotlight tool, you can highlight part of the screen. 1. To activate the spotlight tool, press button 2 on the remote control. A square spotlight appears on the image. You can continue pressing button 2 to switch between three spotlight sizes.
Using the Remote Control 41 Using the Remote Control as a Wireless Mouse When you use the remote control as a wireless mouse, you can control your computer or click through slideshow-style presentations (such as PowerPoint) from up to 30 feet away.
42 Using the Remote Control ■ To double-click, press down twice on the left mouse button. ■ To click and drag, press down on the left mouse button and then tilt the button in the direction you want to drag. You can use the up and down arrow buttons on th e remote control to move the cursor or move through a PowerPoint presentation.
4 Fine-tuning the Projector 43 4 Fine-tuning the Projector Y ou can use the projector ’ s on-screen menus to adjust the image, sound, and other features. You can also create your own startup screen, customize the highlighting tools, and find out how long your lamp has been in use.
44 Fine-tuning the Projector Using the Projector ’ s Menu System The eight projector menus let you adju st and customize the projector features from either the control panel or remote control: ■ The Video menu controls the look and quality of the projected image.
Fine-tuning the Projector 45 Changing Menu Settings You can use the buttons on the control panel or remote control to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the control panel or the remote control.
46 Fine-tuning the Projector 4. Use the Sync+ or Sync – button (control panel) or the button (remote control) to scroll through the list of options. (If a computer or video source isn ’ t connected, certain options may be unavailable.
Fine-tuning the Projector 47 Adjusting the Image The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which source is connected to the projector: standard computer video (analog RGB), DVI computer video (digital RGB), composite or S-Video, component video, or RGB video (standard TV).
48 Fine-tuning the Projector Repositioning the Image Follow these steps to move the image to a diffe rent position: 1. Press the Menu button. You see the menu screen. 2. Press the button to select the Video menu. 3. Press to select the Position option.
Fine-tuning the Projector 49 ■ Tint (NTSC video only) Adjusts the balance of green to magenta in the image. ■ Sharpness Adjusts the sharpness of the image.
50 Fine-tuning the Projector Saving and Recalling Computer Settings When you are projecting from an analog computer source, you can save and recall settings (resolution, tracking, sync signal, and position) in up to five different combinations.
Fine-tuning the Projector 51 Adjusting the Sound You can use the Audio menu to select the audio source or adjust the sound volume or treble/bass balance. 1. Press the Menu button. You see the menu screen. 2. Use the Sync – button (control panel) or the button (remote control) to highlight Audio .
52 Fine-tuning the Projector Customizing the Highlighting Tools The highlighting tools let you add pointers and other types of annotations to your image, as described on pages 39 to 41. You can use the Effect menu to customize th ese tools and set the pointer speed for highlighting.
Fine-tuning the Projector 53 Creating Your Own Startup Screen You can transfer any image from your computer or video source to the projector, and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a sig nal or when you press the A/V Mute button.
54 Fine-tuning the Projector 5. When you see th e message “ Do you use this image? ” select Yes and press . You see the sc reen shown at the left. 6. Use the Tracki ng and Sync buttons (control panel) or the button (remote control) to select a zoom rate (display size), and then press .
Fine-tuning the Projector 55 Customizing Projector Features You can use the Setting menu to disable the projector ’ s sleep mode, adjust the image shape, and customize several other features. 1. Press the Menu button. 2. Use the Sync – button (control panel) or the button (remote control) to highlight Setting .
56 Fine-tuning the Projector ■ Prompt Turns off the identifying text that appears briefly when you switch picture sources. (It ’ s best to leave this on.) ■ A/V Mute Selects the screen color or image to display when you press the A/V Mute button.
Fine-tuning the Projector 57 Setting Advanced Features You can use the Advanced menu to configure the projector for rear projection or ceiling mounting, and adjust several other features. 1. Press the Menu button. 2. Use the Sync – button (control panel) or the button (remote control) to highlight Advanced .
58 Fine-tuning the Projector ■ Ceiling Turn on when the projector is mounted upside-down from the ceiling. ■ COM Port Switches between serial ( RS- 232C ) and US B communication for programming/projector control. 5. When yo u ’ re finished, press Esc or Menu .
Fine-tuning the Projector 59 3. If you have changed the lamp, press to select Reset Lamp Timer. Press again, then select Yes when you see the prompt. Press to confirm the reset. 4. When yo u ’ re finished, press Esc or Menu . Restoring the Default Settings The Reset All option lets you return all the projector settings to their default values.
60 Fine-tuning the Projector 600-811-820.book Page 6 0 Tuesday, April 30, 2002 10:17 AM.
5 Maintaining and Transporting the Projector 61 5 Maintaining and Transporting the Projector Y our projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. Any dirt or smears on the lens may show up on your projected image.
62 Maintaining and Transporting the Projector Cleaning the Lens Clean the lenses whene ver you notice dirt or dust on the surface. ■ Use a canister of compressed air to remove dust. ■ To remove dirt or smears on the lenses, use lens-cleaning paper.
Maintaining and Transporting the Projector 63 Cleaning and Replacing the Air Filter Clean the air filter on the bottom of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation.
64 Maintaining and Transporting the Projector 4. If you need to replace the filter, press the arrow tab and lift up the filter to remove it. 5. To install a new filter, first insert the tabs, then press down until it clicks in place. Replacing the Lamp The projection lamp typically lasts for about 1500 hours of use.
Maintaining and Transporting the Projector 65 Follow these steps to replace the lamp: 1. Turn off the projector, wait for it to cool down (when the light stops flashing), then unplug the power cord. 2. Allow the projector to cool for at least half an hour (if it has been on).
66 Maintaining and Transporting the Projector 5. Grasp the lamp as shown and pull it straight out. 6. Gently insert the new lamp. 7. Once the lamp is fully inserted, ti ghten its screws. 8. To replace the lamp cover, insert the tabs and then snap the cover into place.
Maintaining and Transporting the Projector 67 Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector ’ s menu. 1. Press the Menu button on the control panel or the remote control. You see the main menu.
68 Maintaining and Transporting the Projector Transporting the Projector The projector contains many glass and precision parts. If you need to transport it, follow these packing guidelines to prevent damage to the projector: ■ When shipping the projector for repairs, use the origin al packaging material if possible.
6 Solving Problems 69 6 Solving Problems T his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can ’ t solve yourself.
70 Solving Problems Using On-Screen Help If the image doesn ’ t look right or your audio isn ’ t working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control.
Solving Problems 71 4. Highlight a solution (if this choice is available). Then press t he button to select th e solution. Press the Esc button if you need to back up. If the solution is to adjust one of the settings, press either the Tracking – or Tracking+ button on the projector (or use the button on the remote control) to adjust it.
72 Solving Problems Refer to the following table for a complete description of the projector ’ s status lights and their meaning: Status lights Light Status Description orange The projector is in sleep mode. You can unpl ug it or press the Power button to turn it on.
Solving Problems 73 The power light is flashing orange and you cannot turn on the projector. The lamp is cooling down. Wait until the light turns off and then press the Power button to turn on the projector. The power light does not come on. Make sure the power cord is connected securely both at the power outlet and the projector.
74 Solving Problems You see a blue screen with the message No Signal displayed. ■ Make sure the cables are connected correctly, as described in Chapter 1.
Solving Problems 75 If you ’ re using Macintosh OS X: 1. Select System Preferences . 2. Select Dis plays . 3. Make sure the VGA Display dialog box is selected. 4. Click the Arrange tab. 5. Make sure the Mirror Displays checkbox is selected. The message Not Supported is displayed.
76 Solving Problems ■ You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information. The image isn’t square, but trapezoid-shaped. ■ If you ’ ve tilted the projector upward by extending the legs, the image will be broader at the top.
Solving Problems 77 ■ Adjust the Sharpness setting on the Video menu (see page 48). When you change video settings, you should be able to see the effect on the screen immediately. If you ’ re projecting from a computer, you may also need to adjust the tracking and sync as described in the next section.
78 Solving Problems 3. Hold down the Shift button and press the Sync – and Sync+ buttons to increase the sharpness of the image. The colors of the image are not right. ■ If you ’ re displaying a computer image, use the Color Mode option in the projector ’ s V i d e o me n u to a d j u s t t h e c o l o r .
Solving Problems 79 ■ Make sure the Windows volume controls on your computer are not turned all the way down or set to Mute. You may be able to check this by clicking the volume control in your Windows System Tray (lower right corner of the scree n).
80 Solving Problems Where To Get Help EPSON provides technical assistance through electronic support services 24 hours a day, as listed in the following table. Telephone Support Services To use the EPSON PrivateLine Su pport service, call (800) 6 37-7661 and enter the PIN on the EPSON Private Line Support card included in your owner ’ s kit.
A Appendix A: Connecting to Additional Equipment 81 A Appendix A: Connecting to Additional Equipment T his appendix explains how to connect the projector to a desktop PC or Macintosh, high-end workstation, more than one computer, or a DVI video source.
82 Appendix A: Connecting to Additional Equipment Installing the Projector The projector can be installed for four different viewing setups: front projection, ceiling mounting, rear projection onto a .
Appendix A: Connecting to Additional Equipment 83 Controlling the Projector from a Computer If you want to be able to control the projector ’ s settings from a computer, you can install the EMP Link program. You can download this program, plus its User ’ s Guide, from EPSON ’ s web site at support.
84 Appendix A: Connecting to Additional Equipment Connecting to a PC Desktop Computer You can connect the projector to any IBM-compatible PC. This section includes instructions for the following: ■ .
Appendix A: Connecting to Additional Equipment 85 3. Connect one end of the computer cable to the projector ’ s Computer2/Component Video port, as shown. 4. Connect the other end of the cable to the computer ’ s video port. 5. Tighten the screws on the connectors.
86 Appendix A: Connecting to Additional Equipment Connecting the Mouse Cable To use the remote control as a mou se, follow the steps below. You ’ ll use a different mouse cable, de pending on whether your computer has a round PS/2 mouse port or a flat USB port.
Appendix A: Connecting to Additional Equipment 87 Connecting the Audio Cable If your presentation includes sound and you want to use the projector ’ s built-in speakers, you ’ ll need to connect a stereo, mini-jack audio cable (not included). If you connected the USB cable, you may not need a separate audio cable.
88 Appendix A: Connecting to Additional Equipment Connecting to a Desktop Macintosh You can connect the projector to any desktop Macintos h. This section includes instructions for the following: ■ C.
Appendix A: Connecting to Additional Equipment 89 3. Connect one end of the computer cable to the projector ’ s Computer 2/ Component Video port, as shown.
90 Appendix A: Connecting to Additional Equipment Connecting the Mouse Cable To use the remote control as a mou se follow the steps below. If the Macintosh has a USB port, you can use the USB mouse cable included with the projector.
Appendix A: Connecting to Additional Equipment 91 Connecting the Audio Cable If your presentation includes sound and you want to use the projector ’ s built-in speakers, you ’ ll need to connect a stereo, mini-jack audio cable (not included). If you connected the USB cable, you may not need a separate audio cable.
92 Appendix A: Connecting to Additional Equipment Connecting to a Second Computer To connect a second computer to the projector, you need to use the projector ’ s Computer1 port. You ’ ll need the optional DVI-analog cable, unless the computer supports DVI (Digital Visual Interface) video.
Appendix A: Connecting to Additional Equipment 93 Connecting to a High-End Workstation There is no across-the-board standard for workstation video output. However, your PowerLite projector is capable of remap ping input resolutions up to 1600 × 1200 pixels.
94 Appendix A: Connecting to Additional Equipment 600-811-820.book Page 9 4 Tuesday, April 30, 2002 10:17 AM.
B Appendix B: Notices 95 B Appendix B: Notices T his chapter includes safety instructions and other important informati on about your EPSON PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table.
96 Appendix B: Notices ■ Never push objects of any kind through the cabinet slots. Never spill liquid of any kind into the projector. ■ Except as specifically explained in this User ’ s Guide , do not attempt to service this product yourself. Refer all servicing to qualified personnel.
Appendix B: Notices 97 Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector.
98 Appendix B: Notices Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; an d/or CPU Boards and Power Suppli es used with Class B Personal Computers We: EPSON AMERICA, INC.
Appendix B: Notices 99 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
100 Appendix B: Notices Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered : Epson America, Inc.
Appendix B: Notices 101 FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID.
102 Appendix B: Notices 600-811-820.book Page 1 02 Tuesday, April 30, 200 2 10:17 AM.
C Appendix C: Technical Specifications 103 C Appendix C: Technical Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels Diagonal: 0.
104 Appendix C: Technical Specifications Projection Lamp Type UHE (Ultra High Efficien cy) Power consumption 200 W Lamp life About 1500 hours Part number V13H010L15 Remote Control Range 32.8 feet (10 meters) Batteries Alkaline AA (2) Mouse Compatibility Supports PS/2 and USB Dimensions Height 4.
Appendix C: Technical Specifications 105 Environmental Temperature Operating: 41 to 95 ° F (5 to 35 ° C) Storage: 14 to 140 ° F (-10 to 60 ° C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90 % RH, non-condensing Safety United States FCC Part 15J Class B UL1950 Rev.
106 Appendix C: Technical Specifications Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below.
Appendix C: Technical Specifications 107 1 The image is resized so that it displays using one of the projector ’ s native formats (PowerLite 600p only).
108 Appendix C: Technical Specifications ESC/VP21 Commands When the projector is in a command ready state, it returns the : code. When command processing is complete, the projector also returns a : code. If command processing terminates with an error, an error message is output and then the : code is sent.
Index 109 Index A A/V Mute, 30, 54, 56 A/V Mute button, 29, 36 About menu, 44, 58 to 59, 67 Accessories, 6 to 7, 80 Advanced menu, 44, 57 to 58 Air filter, cleaning and replacing, 63 to 64 Anti-theft .
110 Index Connector pin assignments, 105 Contrast setting, 48 Cursor/Stamp tool, 39, 52 D Declaration of Conf ormity, 98 Default settings, restoring, 46, 59 Desktop adapter, Macintosh, 88 to 89 Deskto.
Index 111 M Macintosh connecting, 88 to 91 desktop adapter, 88 to 89 Manuals, 3 to 4 Menus About, 44, 58 to 59, 67 Advanced, 44, 57 to 58 Audio, 44, 51 changing settings, 44 to 46 Effect, 44, 52 Reset.
112 Index Resizing image, 28, 37 Resolution, 1, 49, 103 S Safety instructions, 95 to 96 specif ication s, 105 Screen blank, 22 to 24 distance from projector, 10 Screen image See Image Setting menu, 44.
Index 113 Volume adjusting, 29, 36, 51 button, 29 , 36 setting, 51 W Warning lights, 71 to 73 Warranty, 4 Workstations, connecting projector to, 93 Z Zoom ratio, 103 Zooming image, 25, 37 600-811-820.
デバイスEpson 600Pの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson 600Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson 600Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson 600Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson 600Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson 600Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson 600Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson 600Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson 600Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。