Epsonメーカー745cの使用説明書/サービス説明書
ページ先へ移動 of 23
Epson PowerLite 745c Projector 8/04 Epson PowerL ite 745c Project or - 1 Projector Parts Specifications General Type of display Poly-silicon TFT active matrix Resolution 1024 × 768 pixels (XGA) (native format) Color 24-bit, 16.
Epson PowerLite 745c Projector 2 - Epson PowerLite 74 5c Projector 8/04 Safety and Approvals United States FCC 47CFR Part15B Class B (DoC) UL60950 Third Edition Canada ICES-003 Class B CSA C22.
Epson PowerLite 745c Projector 8/04 Epson PowerL ite 745c Project or - 3 Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting.
Epson PowerLite 745c Projector 4 - Epson PowerLite 74 5c Projector 8/04 3. Press the P Power button on top of the projector or on the remote control. The projector beeps once and the P Power light flashes green as the projector warms up , then an image begins to appear.
Epson PowerLite 745c Projector 8/04 Epson PowerL ite 745c Project or - 5 Selecting the Image Source If multiple devices are connected to the projector, the easiest way to select the image sou rce is to press the Search button on the remote control or the Source Search button on the projector until the correct image is projected.
Epson PowerLite 745c Projector 6 - Epson PowerLite 74 5c Projector 8/04 Adjusting the Image Shape The projector automatically correc ts images that are distorted when the projector is tilted up or down (up to a 15° tilt). The Keystone window appears on the screen while the projector makes the correction.
Epson PowerLite 745c Projector 8/04 Epson PowerL ite 745c Project or - 7 Using Direct Power On The Direct Power On function enables faster setup. The projector will start up automatically when you plug it in ; you won’t have to press the P Power button.
Epson PowerLite 745c Projector 8 - Epson PowerLite 74 5c Projector 8/04 4. While the image is enlarged, you can: ❏ Use the pointer button to move around the screen. ❏ Press the E-Zoom button to zoom out. 5. When you’re done, press the Esc button to return the im age to its original size.
Epson PowerLite 745c Projector 8/04 Epson PowerL ite 745c Project or - 9 Using Password Protection If you assign a password for the projector, a screen app ears requesting the password whenever you turn on the projector. If you enter the password incorrectl y three times in succession, the projector’s operation is locked .
Epson PowerLite 745c Projector 10 - Epson PowerLite 745c Projector 8/04 6. Press Menu to close the Password Protect menu. Starting the Projector with a Password Caution: If you lose the remote control, you will no t be able to enter the password; so keep the r emote control in a safe place at all times.
Epson PowerLite 745c Projector 8/04 Epson PowerLite 745c Projector - 11 Depending on whether your projector is set up to connect in Ad Hoc mode or Access Point mode (also called infrastructure mode), you see this screen: 3. If you’ve already configured the projector for your wireless network, go to “Projecting Wirelessly” on page 15.
Epson PowerLite 745c Projector 12 - Epson PowerLite 745c Projector 8/04 6. Select the appropriate settings for your mode: 7. When done making settings, highlight the OK button at the top of the screen. Then press Enter . Highlight the OK button again and press Enter to retu rn to the main EasyMP Network Screen.
Epson PowerLite 745c Projector 8/04 Epson PowerLite 745c Projector - 13 3. Click the Configure button. Then click the Advanced tab on the screen that appears. You see a screen like this: 4. Ad Hoc mode: Highlight Network Type in the Property list and set the Value to 802.
Epson PowerLite 745c Projector 14 - Epson PowerLite 745c Projector 8/04 12. Verify that you’ve enabled yo ur computer’s connection to the access point. It should be listed as shown above, with the small icon next to it, indicating a connection. If it’s not listed, click Configure and then type the name of your access point.
Epson PowerLite 745c Projector 8/04 Epson PowerLite 745c Projector - 15 Projecting Wirelessly Once you’ve started EasyMP an d set up your projector and computer in eithe r Ad Hoc mode or Access Point mo de, follow these steps to start NS Connection and project wirelessly.
Epson PowerLite 745c Projector 16 - Epson PowerLite 745c Projector 8/04 4. On c e t h e n am e o f y o u r p r o j e c t o r a p p e a r s , se l e c t i t a n d c l ic k Connect . If more than one projector is listed, you can select up to four additional pr ojectors and co nnect to them at the same time.
Epson PowerLite 745c Projector 8/04 Epson PowerLite 745c Projector - 17 3. Click Use IP connect mode , then click OK . You see this screen: 4. Click IP connection . You see this screen: 5. Enter the projector’s IP address and click Search . The IP address appears in the Projector list and a searching icon displays.
Epson PowerLite 745c Projector 18 - Epson PowerLite 745c Projector 8/04 Managing Projecto rs from a Remote Computer The software included with your projector lets you monitor and control projector(s) from a remote computer. These features are intended for use by network administrators.
Epson PowerLite 745c Projector 8/04 Epson PowerLite 745c Projector - 19 You see this screen listing all registered projectors: No t e : To delete a projector fr om the list, highlight the projector name, and click Delete .
E p so n P ow er Li t e 745c P r o j ect or 20 - Epson PowerLite 745c Projector 8/04 Controlling Your Projectors The control buttons in the up per-right of the EMP Monitor screen let you turn the projecto rs on and off and select video signals. (Hold the mouse pointer over a button to see a description of its me aning.
Epson PowerLite 745c Projector 8/04 Epson PowerLite 745c Projector - 21 Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. ❏ Use a canister of compressed air to remove dust. ❏ To remove dirt or smears on the lens, use lens-cleaning paper.
Epson PowerLite 745c Projector 22 - Epson PowerLite 745c Projector 8/04 3. If you need to replace the filter, slide it off as shown. 4. Slide the new air filter until it clicks in place. Replacing the Lamp The projection lamp typically lasts for about 2000 hours of use (in High Brightness mode) or 3000 hours (in Low Brightness mode).
Epson PowerLite 745c Projector 8/04 Epson PowerLite 745c Projector - 23 8. Insert the two cover tabs , then press down on the cover until it snaps into place. 9. Reset the lamp timer as described in the next section. Resetting the Lamp Timer You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp message.
デバイスEpson 745cの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson 745cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson 745cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson 745cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson 745cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson 745cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson 745cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson 745cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson 745cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。