EpsonメーカーPL 735cの使用説明書/サービス説明書
ページ先へ移動 of 28
EPSON PowerLite 735c Multimedia Projector User’s Guide Supplement Installing and Setting Up Wireless Projecting for Macintosh Using EMP NS Connect for Wireless Projecting Using Projector Groups Using E-Mail Alerts Projecting Movies Through Eas yMP ® ® Bernslip.
2 EPSON is a registered trademark and Ea syMP is a trademark of SEIKO EPSON COR PORATION. PowerLite is a registered trademark of Epson America, Inc. General Notice: Other product names us ed herein are for identification purposes only and may be trademarks of their respective owners.
3 Introduction Your EPSON PowerLite 735c projec tor includes new features for Macintosh ® and Windows ® user that are not covered in the User’s Guide.
4 Installing the Software Follow these steps: 1. Insert the EasyMP software CD-ROM in your drive. You see a window containing the EMP NS Connection.pkg icon. 2. Double-click the EMP NS Connection.pkg icon. 3. Click Continue . You see the software license agreement.
5 Configuring Your Network Connection Follow the instructions in your Projector User’s Guide to start EasyMP and insert the EPSON 802.11b card in the projector. Determine whether you will use Ad Hoc mode or Access Point mode to connect to the projector.
6 ■ For optimal performance, set your screen resolution to 1024 × 768 or lower with a color depth of Thousands (16 bit). ■ When making Location settings, you can select the desired location and change all the network settings one at a time.
7 The first time you start NS Connection in Windows, you see a window asking you to select your network. 2. Select the IP address for your computer’s network adapter card and click OK . You see the screen below. (If you have previously started NS Connection, or you’re using a Macintosh, this is the first screen you see.
8 The color of the status icon indicates the projector’s status: ■ Gray: the projector is not connected ■ Red: the projector is connected to another computer ■ Green: the projec tor is connected to your computer.
9 5. Type in the four-digit number displayed on the EasyMP Network screen and click OK . Once the connection is established, you see your computer’s image transmitted to the projector, and a floating control bar: 6. If necessary, drag the control bar out of the way, or minimize it.
10 If you are using more than one projector, you can use the Projector drop-down menu to select the projector to which you want to make any of the following changes: ■ Brightness Increase or decreas.
11 Connecting in IP Connect Mode Even if your projector and computer are on a different subnet (Access Point mode only) or connecting over different routers, you can establish a connection manually using IP Connect Mode. 1. Start NS Connection on the computer to which you want to connect.
12 3. Select Use IP connect mode and click OK . You see the followin g screen: 4. Click IP connection . You s ee this screen: 5. Enter the projector’s IP address and click Search . Click here Enter the IP address and click Search note You can add up to 16 projectors to the list and connect to four projectors at the same time.
13 The IP address appears in the Projector list and a searching icon displays: If the search fails to find a projector with the speci fied IP address, the searching icon turns into a question mark. If this happens, run EasyMP to check the projector’s IP address, then repeat this step.
14 Using Projector Groups You can register projectors as a group if you want to provide quick and easy access to other computers. You can also export or import group information as a file to another computer.
15 3. Click the Advanced button. You see this screen: 4. Enter a name for the group in the Connection Group box. Then enter the IP address of the projector you want to register in the IP address box: note You cannot us e the addresses 0.0.0.0 or 255.255.
16 5. Click Add . The IP address appears in the list of registered printers, and the searching icon appears beside it. If the projector is found, its name appears in the projector list. 6. Repeat steps 4 and 5 for each projector you want to add to the group.
17 Connecting to a Projector in a Group Follow these steps to connect to a projector in a group: 1. Start NS Connection. Then click the Ext ension button on the EMP NS Connection screen. You see this screen: 2. Select Use IP connect mode and Use Group List .
18 3. From the Connection Group list, choose the group you want to connect to and click OK . You see this screen: 4. Click IP connection . (If the upper left button on the screen says IP connect mode rather than Auto matic search mod e , skip this step.
19 6. If you want, repeat step 5 to connect to additional projectors. The computer’s image appears on the projector screen. Exporting a Projector Group You can export group information as a file to another computer on the wireless network. This is useful, for example, if you want to share group access with multiple users.
20 You see this screen. 3. Click Export to export a file for all groups in the Connection Group list. 4. Highlight the file name ( NSGroup.ini ), and then select Save to . Choose a location on the second computer and click Save . To connect to the projector from the new computer, follow the steps beginning on page 17.
21 Importing a Projector Group You can also import group information as a file to another computer on the wireless network. 1. Start NS Connection. Then click the Ext ension button on the EMP NS Connection screen. You see this screen: 2. Select Use IP connect mode and Use Group List .
22 4. On the next screen, select the fil e you want to import and click Open . The names of all of the groups in the file are added to the Connection Group list on the Advanced screen. To connect to the projector from the new computer, follow the steps beginning on page 17.
23 You see the following screen: If you’re connecting over a wired LAN network, go to step 5. If you’re connecting over a wireless network, continue with the next step. 4. Wireless network only: On th e Network Scre en, select the Advanced button next to the Access point mode box.
24 You see the following screen: 6. For Mail Notification Settings, select ON and press Enter on the remote control. 7. Highligh t the IP address of SMTP server box and press Enter . The outline of the box turns green to indicate you are in input mode.
25 12. When done making your settings, highlight the OK button at the top of the screen, the n press Ent er . Highlight the OK button again and press Enter to return to the main EasyMP Network Screen.
26 Projecting Movies Through EasyMP Your projector now includes version 1.11 of the SlideMaker2 software (for Windows only). This upgrade allows you to add movies in the MPEG2 format and PNG files to a sc enario. You can also incorporate the following PowerPoint transitions: You can use the EasyMP CardPlay er program to play back MPEG2 movies.
27 Bernslip.fm Page 27 Friday , December 12, 2003 3:02 PM.
28 CPD-17100R1 Printed in XXX Bernslip.fm Page 28 Friday , December 12, 2003 3:02 PM.
デバイスEpson PL 735cの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson PL 735cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson PL 735cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson PL 735cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson PL 735cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson PL 735cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson PL 735cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson PL 735cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson PL 735cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。