EquipメーカーUSB 2.0 Frontpanel 3.5"の使用説明書/サービス説明書
ページ先へ移動 of 29
www .equip-info.net USB 2.0 Frontpanel 3.5 english Manual.
www .equip-info.net Index 1.0 T rademarks 3 2.0 Introductions 3 3.0 Package contents 3 4.0 Hardware Requirements 3 5.0 System Support 3 6.0 How to install your Card Reader to drive bay 4 7.0 Pin assignment of USB Cable 5 8.0 Driver installations 7 8.1 Windows 98 driver installation 7 8.
www .equip-info.net 1.0 T rademarks All names and products mentioned below are registered trademarks of their respective companies. 2.0 Introductions The advantage of 3.5 USB2.0 internal Multi I/O Card Reader is to provide a better solution to read or write files for variety of memory cards.
www .equip-info.net 6.0 How to Install Y our Card Reader to drive Bay 1. T urn your computer off and disconnect the power cord. 2. Remove the cover of your computer . (Refer to your computer s hardware reference manual and follow the instructions to removing the cover) 3.
www .equip-info.net 7.0 Pin assignment of USB Cable Dual USB cable pin assignment Single-row USB cable pin assignment This mark identify as the pin1 of USB cable end connector www .
www .equip-info.net www .equip-info.net IEEE1394 cable pin assignment Manual_ Page 6.
www .equip-info.net www .equip-info.net 8.0 Driver Installation The card reader need to install application driver for showing media icon on your Windows, you can find the software program in bundle disk and follow next steps to complete the driver installation.
www .equip-info.net www .equip-info.net 3. Click Browse to specify the driver location. 4. Insert your driver disc into the CD-ROM drive and path to DriverWin98, Click OK to next.
www .equip-info.net www .equip-info.net 6. Click Next button to continue. 7. Click Finish button to complete driver installation. 8. Windows will detect reader and display four Removable Disk icons in My Computer , now you can insert your memory card for application.
www .equip-info.net www .equip-info.net Windows® 98SE driver installation 1. T urn on your computer , Windows will detect the addition of new hardware and display the following message. Click Cancel button to close this windows. 2. Insert your driver disc into the CD-ROM drive and path to Driver, double click setup icon.
www .equip-info.net www .equip-info.net 3. Click Next button to continue. 4. Click Next button to continue. Manual_ Page 11.
www .equip-info.net www .equip-info.net 5. Click Next button to continue. 6. Click Next button to continue. Manual_ Page 12.
www .equip-info.net 7. This window shows you that driver has completely installed. Y ou need to restart your computer , Click Finish button. 8. Reboot your system, Windows will detect reader and display four recognizable media icons in My Computer, now you can insert your memory card for application.
www .equip-info.net Windows® ME driver installation 1. Close all of your exist executing files. 2. Insert driver disk into the CD-ROM drive. 3. Double click on Driver folder . 4. Double click on Setup icon. 5. Click Next button to continue.
www .equip-info.net 6. Click Next button to continue. 7. Click Next button to continue. www .equip-info.net Manual_ Page 15.
www .equip-info.net 8. Click Next button to continue. 9. This windows shows you that driver has completely installed. Y ou need to restart your computer , click Finish button.
www .equip-info.net 10. Reboot your system, Windows will detect reader and display four recognizable media icons in My Computer, now you can insert your memory card for application. If you have any problem of using media card, please refer to the next How to use your media memory card section.
www .equip-info.net Windows® 2000 driver installation 1. Close all of your exist executing files. 2. Insert driver disk into the CD-ROM drive. 3. Double click on Driver folder . 4. Double click on Setup icon. 5. Click Next button to continue.
www .equip-info.net 6. Click Next button to continue. 7. Click Next button to continue. www .equip-info.net Manual_ Page 19.
www .equip-info.net 8. Click Next button to continue. 9. This windows shows you that driver has completely installed. Y ou need to restart your computer , click Finish button.
www .equip-info.net 10. Reboot your system, Windows will detect reader and display four recognizable media icons in My Computer, now you can insert your memory card for application. If you have any problem of using media card, please refer to the next How to use your media memory card section.
www .equip-info.net Windows® XP driver installation 1. Close all of your exist executing files. 2. Insert driver disk into the CD-ROM drive. 3. Double click on Driver folder . 4. Double click on Setup icon. 5. Click Next button to continue.
www .equip-info.net 6. Click Next button to continue. 7. Click Next button to continue. www .equip-info.net Manual_ Page 23.
www .equip-info.net 8. Click Next button to continue. 9. Click Next button to continue. www .equip-info.net Manual_ Page 24.
www .equip-info.net 10. This windows shows you that driver has completely installed. Y ou need to restart your computer , click Finish button. 11. Reboot your system, Windows will detect reader and display four recognizable media icons in My Computer, now you can insert your memory card for application.
www .equip-info.net 9.0 How to use your media memory cards This internal card reader provides two slots for over ten most popular memory cards application. Left slot is for bozh CF and Micro drive, right side is 4 in 1 slot for SD/MMC/MS/SMC media cards.
www .equip-info.net 10.0 How to format your memory card Y ou can format the memory card like as format remove disk, but in some memory card such as memory stick and SD card, you must be sure the write protected switch is disable. 11.0 Indicator Description The card reader provides a R/W (read/write) status indicator for card slot diagnosis.
www .equip-info.net 12.0 Booting from CF memory This reader can boot from CF slot like as Floppy disk drive, but your system BIOS must support and has changed to booting from USB device setting, otherwise you can´t boot from this reader .
www .equip-info.net 13.0 How to swap your front bezel If you want to change bezel to different color , find a stylus or pin-like tool to press the plastic-clip in both sides and take off the front bezel.
デバイスEquip USB 2.0 Frontpanel 3.5"の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Equip USB 2.0 Frontpanel 3.5"をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEquip USB 2.0 Frontpanel 3.5"の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Equip USB 2.0 Frontpanel 3.5"の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Equip USB 2.0 Frontpanel 3.5"で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Equip USB 2.0 Frontpanel 3.5"を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEquip USB 2.0 Frontpanel 3.5"の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Equip USB 2.0 Frontpanel 3.5"に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEquip USB 2.0 Frontpanel 3.5"デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
